Plastic palm tree from bottles, how to do it. Master class on creating a palm tree from plastic bottles - photo and video Palm leaves from bottles

A simple and inexpensive way to update the area near the house or on the playground can be making crafts from ordinary plastic bottles. It will take a little time and imagination, and you will be able to create from this versatile material everything that is enough for imagination. You can, for example, make a banana tree. And to make it clear to you how to do this, we created a master class on a palm tree from plastic bottles that are unnecessary in the household quickly and simply with our own hands, it has detailed step-by-step instructions and photo and video tutorials.

Such a tree will serve as a wonderful decoration for a holiday for children or a theme party. The more plastic bottles you take to create one palm tree, the taller and more magnificent it will turn out.

We make a palm tree from plastic bottles with our own hands in stages

To create a palm tree we need the following materials:

1. Plastic bottles in different sizes and colors
2. Scissors
3. Scotch
4. The basis for the future palm tree. Usually take a metal rod.
5. The frame for the future palm tree is a thick wire or a metal pipe.
6. Styrofoam or artificial bananas
7. yellow paint
8. Wire

Making a palm tree trunk:

1) In order to make a palm tree trunk, you need to take bottles Brown color 1.5 liters 2 and 2.5. First you need to cut the bottle from the side of the neck by about a third. You will need the upper part, but do not rush to throw away the lower part - you can also make a trunk out of it by analogy.

2) Cut the bottom of each bottle with a heated knife. We will attach the frame of our palm tree to this cut.

it is necessary to cut into 8 equal parts that part of the bottle that has a neck. It is necessary to cut from the wide edge to the narrow one.

Now we need to make these parts of a pointed shape so that it looks like a petal.

3) We bend the resulting petals to the outside - it will look like a blossoming flower.

palm leaves:

1) In order for our banana tree to have leaves, you need to take bottles of green (preferably different shades), white and yellow. The more colors you use, the brighter the palm tree will look.

2) Cut off the edge of the neck and the base of the bottle. We cut the resulting blank from the bottom of the bottle towards the narrow part into 3 approximately equal parts, but not completely. Approximately 3 cm should remain until the end of the bottle. We give the edges of each part the shape of a narrowed semicircular petal. we begin to gently bend these petals outward in the same way as we did the trunk of a palm tree. Get something remotely resembling a three-blade fan. Now we cut each resulting sheet from the edge to the middle. In the middle, you need to leave a little uncut space - about 2 cm. It turns out like a fringe. The narrower the strips in width you make, the more magnificent the fringe will turn out, and hence the foliage of our palm tree.

3) Now the fringe strips need to be bent in different directions. 1-bend up, 2- leave as is, 3 - down. So the sheet becomes voluminous.

4) There are 2 ways to decorate the leaves. In the first case, we leave our blanks as they are, and in the second, the blanks need to be strung on a flexible wire to make long voluminous branches. In the second case, more bottles will be needed, but the palm tree will also acquire a luxurious crown.

Palm top.

We take a bottle of dark brown color and cut it like a blank into leaves - from top to bottom into thin strips. We collect the segments and wrap them inside.

Palm tree decoration.

We cut blanks for bananas from foam plastic and paint them with yellow paint and carefully pass a thin wire through the upper part.

We collect palm trees:

1) We take a palm tree frame prepared in advance. It can be a thick wire or a metal pipe. And we begin to put the finished blanks of the barrel on the frame with the neck down. We are the first to put on larger blanks and begin to compose the details as a designer. We make up until about 30 cm is left to the edge. Try to arrange the petals of each part in a checkerboard pattern. We fix the parts at the base with glue or tape.

2) Depending on which leaves you prefer to make, there are 2 ways of attaching 1-On the remaining empty upper part of the trunk, we begin to attach palm branches. This is done in the same way as the trunk was assembled. Don't forget to use details different colors and arrange the leaves in a checkerboard pattern. 2 - we attach the cable with the leaves strung on it to the frame of the palm tree to the very top and fix each sheet with tape.

3) Install the crown - glue the workpiece to the edge of the frame with the neck down.

4) We tie artificial bananas to palm branches

To fix our palm tree, we stick a metal pin about 30 cm deeper into the ground for stability (if desired, you can fill it with concrete), but so that at least 40 cm sticks out of the ground - to string the trunk and put our palm tree on top.

Now our plastic bottle palm tree is ready.

Video on the topic of the article

We also suggest that you watch detailed video tutorials on how to create a banana tree yourself for clarity.

A palm tree is considered a symbol of summer and relaxation. But most people do not have enough money to visit near a living palm tree. Therefore, you can combine business with pleasure and make such a decoration for your garden as a palm tree from plastic bottles with your own hands.

Original decor

For this we need:

• Plastic bottles 15 pieces of brown color, with a capacity of 2.5 liters - for the barrel;
• Plastic bottles of 10 pieces of green color, with a capacity of 2 liters - for leaves;
• Any wires with a diameter of 12 mm for fastening;
• Metal sheet 0.5 cm thick;
• Two iron rods 25 cm long;
• Metal tubes 20 mm thick.

How to make a palm tree from plastic bottles, we will tell you step by step in an easy master class.

Cut leaves for palm trees. We take a plastic green bottle and cut it into two equal parts. We need the top one.

We cut the upper part of the bottle lengthwise into strips 3 mm thick.

Please note that the shape of the bottle itself is not so important when making a palm tree.

Thus, we make all the green bottles that are available. We fix the prepared parts on the wire and connect them together. Such a preparation should not be alone.

We proceed to the manufacture of the trunk. For this we take brown bottles. We make cuts along the bottles. Most importantly, they must be wide. And cut out the bottom, as shown in the photo.

Next, we carry out welding work. To do this, we take a metal sheet and weld two iron rods to it as follows: the first rod is at an angle of ninety degrees, and the second rod is approximately at an angle of 60-70 degrees.

It is necessary to put metal tubes on the welded rods. The height that you want to make a palm tree.

We weld metal bushings at the end of the rod. They are necessary in order to fix the leaves made there.

We attach the leaves to the metal pipe. It is better to bend them so that it looks more like a palm tree.

The leaves have been collected, now we move on to the trunk itself.

The main points in the manufacture of leaves for palm trees:

• If you want your palm tree to have wide leaves, then for this you must first cut off the bottoms of the bottle. Next, we cut it into three parts. You can use the yellow color of the bottles, or you can use both colors. So the palm tree will be more expressive and bright. The most important thing is to cut almost to the end of the bottle, you can literally leave half a centimeter;
• Using scissors, round the leaves to the base;
• Next, we make a fringe on the cut strips. Thus, we do on both sides of the sheet. The middle of the sheet should be about one and a half centimeters. To make your palm tree more magnificent, you need to bend the fringe with scissors in the following order: one cut up and the second down.

The main points in the manufacture of a palm tree trunk:

• Cut off the bottom of the bottles;
• We retreat half a centimeter from the lid and cut out eight petals;
• We turn each of them in the opposite direction;
• To save material, you can use the cut off part. Only in order to fix it, you have to make a hole in it.

Key points to consider when assembling a palm tree:

As a barrel, it is best to use a metal-plastic pipe. And the most the best choice diameter is 20 mm. You choose the height you want.

It is best to collect the palm tree itself from below. The higher the palm, the smaller the details of the trunk should be, that is, it is best to use the largest blanks for the bottom. The method is the simplest and not complicated - a glass in a glass. It would be better if their arrangement is staggered.

The bottom itself is best fixed on glue "Moment" , so it will be most reliable. Approximately 30 cm before the top of the stem, it is necessary to complete the assembly of the stem and continue to fix the leaves. It is also recommended to use a checkerboard pattern.

Once you have collected all the palm, it is necessary to bury the welded reinforcement in the ground to a depth of thirty centimeters. Then we put the finished palm tree on the armature.

table palm

For its manufacture we need:

• Bottles with a capacity of 1.0 liters of brown color - 3 pieces;
• A bottle with a capacity of 0.6 liters of green color - 1 piece;
• Stationery scissors;
• Glue "Moment".

Let's get started, here's a step-by-step guide:

1. We cut each of the brown bottles into four parts, it is desirable that they be the same. In each of the parts we make cuts in the form of triangles. The size of which will be approximately one centimeter;
2. Carefully bend the resulting triangles;
3. We take a green bottle and divide it into three parts. We cut each part in the form of triangles. The part with the neck will be the largest of all;
4. We assemble palm trees. We assemble the trunk: first the bottom itself, then all the other parts. When assembling, all parts must be glued. We make the leaves as follows, first insert the most most of with a throat, then the middle part, and attach the bottom to the very top.

Palm is ready!

Video on the topic of the article

In this article, we want to talk about how to successfully combine love for the tropics, creativity and unnecessary plastic bottles.

The palm tree is an undeniable symbol of summer and relaxation. But it’s expensive to go to live palm trees, and you want to get a piece of such a wonderful sunny mood. However, why buy a palm tree if you can make it yourself? Yes, and using items that are easy to find in any home - plastic bottles.

How to make a palm tree from plastic bottles in stages?

• Let's start by cutting palm leaves. To do this, divide the plastic green bottle into two parts, the top one will come in handy.

• Now strips are cut from this upper part. Treat the surface lengthwise. The shape of the bottle does not matter - any will do.

• After cutting, the resulting bottles attached to the cable

IMPORTANT: The cable diameter must be between 12 and 14 millimeters.

• And now you can start making the trunk. For them, plastic bottles with a capacity of about 2.5 liters of brown color are useful.

• Along the bottles make cuts so that the stripes are wide

• The bottom is removed

• Prepare a sheet of metal, the thickness of which should be more than 0.5 centimeters. Two rods need to be welded to this sheet about 25 centimeters long. One of them should be at an angle of 90 degrees to the sheet, and the other under a smaller one.

• Put metal tubes on the rods. The diameter is desirable within 20 millimeters. As for the height, it depends on what height of the palm you want to see.

• At the ends of the rods, metal bushings must be welded. It is in them that palm leaves from bottles will be planted.

IMPORTANT: It is better to bend the wires on which improvised leaves are mounted.

• As soon as the leaves were collected, you can proceed to the trunk

Diagram of a palm tree from plastic bottles

• For clarity, you can see in the diagram how to form the trunk of the future tree from plastic bottles. Fix an iron rod in the ground, and then string bottles on it. Cut the bottom off the bottles

• For green bottles intended for leaves, the bottom is also cut off. Further each of the bottles is cut into 3 or 4 parts. Each part, in turn, is made in the form of a fringe.

• As soon as a few green bottles are designed in the way indicated in the diagram, you can start assembling the crown

IMPORTANT: It is recommended to make cuts in the shape of crosses on the brown bottle - so the green bottles will be better attached. For better fastening, you can also wire the composite crowns inside the brown bottle to each other.

• Now top with a crown attached to the trunk as shown in the diagram

How many plastic bottles do you need to make a palm tree?

There are plastic bottles in every home, but how many do you need for a palm tree? For trunk save 10-15 pieces of brown material, or even more.

Pay attention to displacement: so, for crafts from 15 bottles, it is recommended to purchase a two-liter material, but for smaller palm trees - bottles of 10 - you can stock up on one and a half liter bottles.

As for the leaves, then it is better to take larger bottles for them - palm leaves are quite long. On average, at least 7 bottles are needed for one palm tree.

How to make palm leaves from plastic bottles?

• If you want to get wide leaves resembling a fan, cut off the bottom first. Then make cuts in the bottle so that three parts are formed. It is recommended to use not only green bottles, but also yellow ones - this way the palm tree will look more natural

IMPORTANT: Bring the incisions about half a finger to the neckline.

• Each of the incisions is rounded and tapers towards the base in such a way as to resemble leaves
• Now you need unfold all leaves outward
• The leaves are cut in such a way that a fringe is obtained. Fringe is needed on both sides of each leaf. The middle, of course, should remain intact - 1.5 centimeters is enough. To create splendor, it is recommended to bend each clove according to the following principle - one down, the second evenly, and the third up

How to make a palm tree trunk from plastic bottles?

• First of all, cut off about 1/3 of the bottle- namely the bottom
• 8 petals are cut from the remaining bottle. You need to step back from the lid half a finger
• Turn each segment inside out.

IMPORTANT: You can also use a cut-off third of the bottle to save material. However, you will have to make a hole in it for this. You can use a knife, pre-heated on the stove, for such purposes.

How to assemble a palm tree from plastic bottles?

As a stem, which will serve as a support for the palm tree, it is best to use metal-plastic pipe. Its diameter should be 20 millimeters. But there are no restrictions on the height.

• Start assembly from the bottom. And for the bottom, select the largest details, for the top - the smallest. They are assembled using the glass-to-glass method.
• The petals should turn at this time. in a checkerboard pattern
• The bottom is best fixed with a double narrow adhesive tape- He connects very well. However, you can also use glue.
• But 30 centimeters before the top of the stem, you need to finish collecting the trunk and start collecting foliage. And also use a checkerboard pattern
• Once the build is complete, bury rebar 30 centimeters into the ground. In this case, 40 centimeters should remain on the surface. And put a ready-made pipe with a palm tree on this fitting

Options for palm trees from plastic bottles

Palm trees from plastic bottles can look different. But it's better to see once, so we bring to your attention a selection of photos with similar artificial trees.

Palm bonsai from plastic bottles

• To make such a palm tree cut off the top and bottom of the bottle

• From the resulting green plastic material cut into small strips, and from them - leaves

IMPORTANT: The strips should be about a centimeter wide.

• Each of the leaf pieces is necessary pierce

• You should also prepare the wire for the branches- it should be from 0.2 to 0.5 millimeters in diameter

• Now cut 30-50 centimeters of wire and fold it in half. Thread the first sheet and twist the ends 2 or 3 times - this is how it is fixed

• The first rectangle is the top sheet. Place the rest on either side of it.

IMPORTANT: Retreat from each pair of leaves should be 3-4 millimeters, and then you need to twist the wire.

• As soon as the weaving of the branch is completed, twist the ends. In general, for a palm tree, you need to stock up on 15 branches. Let the top ones contain the most a large number of leaves, and the lower ones are smaller

• The palm tree will consist of two tiers. Branches should intertwine with each other, creating a common trunk

• Now let's build the foundation.. A pot is not very suitable - it is best to fix the palm tree on the island. For its manufacture, a soap dish, a saucer, a vessel is useful - anything that has an oblong shape. The container is covered with cling film, and then filled with liquid alabaster

• Put the palm tree in a bowl and wait 10 minutes- during this time, hardening will occur. Then only take out the platform How to make a big palm tree from plastic bottles?
  • First of all, stock up on plenty of bottles. Cut them in half, and form teeth on the part of the cut.
  • Further in the ground a metal pin is attached. You can use a strong wire as an alternative

  IMPORTANT: Be sure to ensure that the pin is firmly attached to the ground.

  • bottle blanks put on a pin. It is advisable to go around them in order to create a natural effect.
  • From green bottles cut the leaves, after removing the bottom from the bottles
  • Connect all the elements into a common design. They can be fastened with bundles or welding.
  
  
  

  How to make a small palm tree from plastic bottles?

  For a similar little palm tree for the room need only 3 brown bottles and one for leaves with a capacity of 0.6 liters.

  • So, cut each of the brown bottles into 4 equal pieces. And on the cut of each of the parts cuts need to be made in the form of triangles in centimeter
  • Peel back those cuts
  • Now divide the green bottle into 3 parts, the largest of which will be the one with a neck - 9 centimeters
  • Collect the trunk from the part that consists of the bottom. Glue other components of the trunk into it
  
  
  

  As you can see, you can arrange your own tropics in any strip of our vast country, and at any time of the year. The material is very accessible, and a little time will be spent. In addition, such a palm tree is perfect for those who do not have time to take care of living plants.

  Video: Master class for making sprawling palm trees from bottles

The following method of forming a palm tree from plastic bottles with a step-by-step algorithm of actions is original.

Work begins with the laborious process of assembling the barrel:

• You will need a third of the plastic container, cut off from the side of the neck.
• All blanks are cut into 8 parts, leaving a small area near the base untouched.
• In order for the palm trunk to have a scaly surface, each segment is bent outwards.
• Reduce Waste plastic bottles the use of the lower part of the container will help. To do this, at the bottom with a hot knife, you need to make a hole of a suitable diameter. Otherwise, the process of forming blanks is identical to the algorithm described above.

Palm leaves can also be made in other shapes. The crown will be presented in the form of wide foliage resembling a fan. For it, you can use plastic containers of green and yellow.

Comment! The splendor of the crown directly depends on the number of leaves from the bottles, and their width - on the size of the containers.

It is better to make the crown of a tall palm tree from a 5-liter container; for a medium-sized plant, 1.5-liter containers will be enough. Cutting the leaves of the fan is quite simple:

• on a plastic container, the bottom is removed;
• the bottle is cut lengthwise into 3 parts;
• each segment is rounded at the end;
• the petals are cut with a fringe on both sides, in the middle there remains a narrow untouched strip about 1.5 cm wide;
• splendor is achieved by bending the fringe in different directions.

In conclusion, the elements strung on the cable and fittings are fastened together.

Third option

Another way involves creating a palm tree using the bottoms of plastic bottles. It should be noted that much more will be required for such a copy of the container.

Crown design step by step:

• On each bottom, it is necessary to make a hole that corresponds in diameter to the prepared base. The work is done with a hot knife or drill.
• Blanks from green bottles are strung on a hard cable.
• The edges of the wire are secured with caps to keep the parts in place.

For a palm tree trunk, you need a log with the appropriate diameter. The bottoms of brown bottles are stuffed onto it with overlapping nails. The result is such a miracle palm tree:

The video tutorial will present another way to make an attractive specimen of an exotic plant for decorating the site.

School of practical people. Master class making a beautiful and beautiful palm tree with your own hands from plastic bottles.
New technologies and innovations bring a lot of good things to people's lives, make it easier and more beautiful. But with this new thing, something bad comes into our lives.
A plastic bottle is an example of the above. This thing was developed in 1941. The plastic bottle has conquered the whole world. It is very popular for a number of its positive qualities:
- cheap material
- very technical
- ease of operation,
- can be reused at home.

Unfortunately, the plastic bottle also brought bad moments:
- the period of decomposition in natural conditions is more than 100 years,
- during decomposition and combustion, dangerous and harmful substances are released.

Over the past summer season, our family has accumulated a lot of plastic bottles. In the fall, they began to think about where to throw them away, how to take them to a landfill. The youngest daughter came up with a brilliant idea to leave plastic bottles at home and make something beautiful and original.
Everyone liked the idea of ​​the daughter. On the Internet, we reviewed a lot of crafts. We settled on the idea of ​​making a palm tree.

Stage #1
Collect as many plastic bottles as possible. The color is green (from under the Sprite). The color is dark brown (from under Kvass or Beer). A huge amount is needed. Immediately ask for help from neighbors and friends. You will certainly be helped in difficult endeavors.

Stage #2
Think carefully about what height and size your palm trees will be, how many palm trees will be, where you will install.
We, personally, to begin with, make one tall palm tree.

Stage 3
We tear off all stickers and product labels. Rinse dirty plastic bottles gently in hot water.

Stage 4
Sorting plastic bottles. So it will be easier and more comfortable to work. We start with brown bottles. Set aside the green ones, let them not interfere. We will use them later.

Stage number 5
Let's start making a powerful and reliable trunk. We take plastic brown bottles. Carefully cut off the bottoms of the bottles. Then we take a drill with a nozzle. We make holes in the center of the bottoms on a hard surface. We take armature. We string the blanks on the reinforcement one by one.

Stage #6
We bring green bottles from the warehouse. From them we will make the leaves of our exotic palm tree. For this procedure, we need sharp scissors and a knife. Carefully cut off the bottom of the plastic bottle. Throw away. Cut the rest into long strips.

Stage number 7
We mount and securely fix the workpieces on iron fittings. The length of the fittings depends on the number of bottles and the size of the palm tree.

Stage #9
Final stage. We securely install all structural elements. Iron fittings are securely fastened to each other. We invited a welder neighbor. Five minutes of work. There she is. Our beautiful palm. Reliably mount the finished structure. Pour cement mortar into the pit, install a palm tree, fix it with twine.
Our family decided that three gorgeous palm trees will soon grow in front of our house. We have the Bahamas all year round. See photo No. 8. Our palm trees delight all neighbors, make them stop all pedestrians and drivers, take pictures of beauty and tell friends about a miracle!!!