What to look for when choosing a bath tub. Kvaril baths: advantages and disadvantages of modern material

Now acrylic sanitary ware is in great demand in the markets. Consumers have become accustomed to the fact that acrylic is light and easy to mold. But quaril has not yet had time to receive the same recognition as acrylic, and completely in vain.

Quarry baths - how to choose

At its core, kvaril is an advanced acrylic and is a mixture of quartz and acrylic. Each of these materials plays a role in the composition. Quartz increases the rigidity of the product, while acrylic gives it flexibility.

The color and structure of products are determined by additional impurities that are present in the composition of this material. And also, thanks to them, all the positive qualities of acrylic, which is part of the composite material, are enhanced, giving products shine, elasticity and a rich, smooth color.

Quaril also contains acrylic resins, which make up more than half of the total mass of the material. It is they who determine the flexibility and plasticity during processing. Initially, kvaril was intended for restoration, but over time, he managed to almost completely replace acrylic and surpass it in performance. This newly created material is used in the manufacture of bathtubs and shower trays.

The combination of these two materials has a high shockproof quality and resistance to mechanical damage. For example, if a heavy object falls into the bath, no damage will remain on it.

They do not need to install load-bearing frames, since the wall thickness is approximately 10 mm, and the bottom thickness can reach 25 mm. Thus, they are made both with a frame and made frameless.

Due to additives that strengthen the material, bathtubs from it are heavier than acrylic ones, but much lighter than cast iron ones. They are made by casting into special molds and, thanks to this technology, products from kvaril can also be with right angles, which makes it possible to save space, fitting perfectly into the space allotted for them.

The production of bathtubs from acrylic allows them to be cast only with rounded edges. Quarry models have good sound insulation, and the sound of water pouring into them is almost inaudible. The surfaces of models made of quaryl have an ideal, uniform, without the slightest defects, coating, but with all these qualities, it is absolutely not slippery.

Kvaril bathtubs perfectly retain heat, the water in them cools down very slowly. Such products are easy to care for, they are easy to install and any material for cladding can be used.

Attention deserves the form of such products. They are produced in the form of a circle, oval, they can be rectangular, angular, with beveled edges, in the form of a hexagon or with wavy edges. They are also equipped with additional nozzles and other details that allow you to comfortably take a bath.

Thanks to precision casting, all additional parts built into the design are almost imperceptible, they simply merge with the surface.

But to all the advantages of these products, their disadvantages are added:

• The biggest downside is their price. Of course, it will cost less than exclusive models, for example, models made of stone or natural wood, but when compared with metal and acrylic products, it is much more expensive.
• Compared to acrylic products, acrylic bathtubs do not have such a variety of shapes as their acrylic counterparts.
• Another disadvantage is that bathtubs and shower trays are mainly produced from this material. Therefore, choosing a set of sinks and toilets is a rather difficult task.
• Quarry products are much stronger than acrylic, but not as strong as steel or cast iron.
• This material does not tolerate very well hot water and, so that the product does not deform, when bathing, it is better to immediately adjust the water to a temperature that is comfortable for the body.

Installation of quartz bathtubs is slightly different from other types of products. Since they have sufficient rigidity and do not need additional reinforcement, the frame in this case can serve as a decorative finish.

The outer part can be closed using a sliding one, where, as a result, all sorts of small objects can be folded. Make the cladding of the frame with the same tiles that are finished with the walls of the room, connecting the decor of the room together.

Such structures are installed mainly on legs that can be adjusted. With their help, give it any position and height. The difference from other such models is the absence of drain and overflow holes in some models.

They are supplied with a cutter with a template for drilling holes. This is due to the fact that during installation you can choose the most convenient place for its placement. But in order to make such holes, you will need to invite a professional with the skills of such work.

The installation itself is not difficult. First you need to install it on the legs. To do this, use the level to set the tank in the correct position so that there are no distortions. Next, a drain and overflow is made in a convenient place and connected to sewer pipes using carving.

The mixer can be built into the side, which is considered the simplest option and fully complies with the requirements modern design. The complexity of installing mixers depends on their models. After all the installation work, testing is carried out. The bath is filled with water and left for a while, and if there were no leaks, then the installation was correct. And if it leaks somewhere, then you need to change or strengthen the gaskets.

There are two types of kvaril baths - these are models that are installed separately and, of course, built-in. For small rooms, built-in ones are mainly used, since they can be placed tightly against the wall on any stand (legs, frame).

In large rooms, a stand-alone model will look better. It can be installed in the center of the room on legs or on a podium, or in any part of the room, according to the chosen design.

How to care for a bathtub

Buying a new expensive thing, you always begin to treat it very reverently. This also applies to quartz baths. Caring for them is not difficult, but must be properly organized. Now on sale very a large number of any detergents, but each of them has its purpose.

Prolonged use of any object leads to a deterioration in its condition, and too careful care can sometimes just do harm. Quaryl is quite resistant to household chemicals, but this does not mean that such products should be used often.

Creamy cleaners can easily deal with dirt without damaging a smooth surface. The smooth and glossy surface of such products eliminates the presence of cracks and sedimentation of dirt.

To extend the service life and prevent any unnecessary consequences, you need to make it a rule to regularly care for the product. After each bath, rinse it with warm running water and wipe dry with a soft cloth.

In addition to creamy cleaners, sprays are also successfully used. They must be evenly sprayed over the surface, and then rinsed thoroughly with water. It is undesirable to use a spray containing acid, because its contact with metal objects can lead to an irreversible process. Means containing acids are very good at cleaning limescale and scale. Alkaline products will remove rust well.

Disinfectants should not be excluded either. Disinfection is best done after cleaning, as these compounds are not cleaning. This procedure is ideally carried out after each adoption. water procedures, but this is not fundamentally important. Everyone can do this procedure at their discretion.

Disinfection is carried out in two ways. The first method involves diluting the disinfectant in a filled bath with water at room temperature, holding this mixture for 10 minutes and draining it all. Then rinse the surface well with running water to avoid getting the antiseptic on the skin. In the second method, the antiseptic is applied directly to the surface, aged according to the instructions and also washed off with running water.

Hot tubs require more care. Despite built-in anti-contamination systems, deposits can form in the nozzles. The main enemy of a hot tub is hard tap water. When washing such structures, each nozzle is removed and washed separately with soft non-abrasive products, which are diluted in a large amount of water.

As in other cases, folk remedies here will not be redundant.

• To remove limescale, you need to dilute a pack of citric acid in a bath with enough hot water leave for a couple of hours and rinse with water. In addition to the fact that it will clear the plaque, it will also make it shiny for a long time.
• Works well on all stains and dirt toothpaste, because it does an excellent job with tooth enamel.
• Soda and soap, applied for 15-20 minutes, will help to cope well with rust. This should be done very carefully, because soda is abrasive and if you overdo it, you can end up with matte spots.
• Ammonia, salt, vinegar - all this will help to cope with pollution without using chemicals.

If, nevertheless, a decision is made to purchase a quartz bath, then you need to consider that the price will depend on the quality. It is better to choose products from reputable manufacturers who value their reputation. Now the production of models from quaryl has not yet been put on stream, and the release is in single pieces.

You can make an individual order and get an absolutely unique model in design, shape and color. Depending on the configuration and features, they will cost from 60 tr. up to 600,000 rubles.

On the this moment Quarry plumbing is represented by German manufacturers, but it is still expected to reduce prices due to the filling of the market with this product. Despite the fact that such products are considered a novelty, they are already seriously taking their place in the plumbing market.

Due to their rather long service life, such bathtubs can be a decoration for a very long time and look shiny and beautiful.

The production of sanitary ware is currently constantly developing and improving. In the last decade, plumbing items such as acrylic bathtubs have become widespread, but they have a number of drawbacks. Manufacturers of plumbing came to the decision to level the shortcomings acrylic bathtubs and as a result, we created completely new quartz bathtubs. Therefore, this article will address the issue of a revolutionary novelty: what is it?

As mentioned above, the shortcomings of acrylic baths served as an impetus for the creation of a new revolutionary material. They became kvaril. This material is synthetic and in composition is a combination of acrylic and quartz sand. This combination is reflected in the very name of the raw material. Due to the colossal strength of quartz sand, quartz sand is an extremely durable raw material for the production of bathtubs. And from acrylic, the new material got an aesthetic appearance and excellent plasticity.

The invention of new raw materials for the production of sanitary items belongs to the Finns. Quaril production technology is the conclusion of the smallest particles of quartz in plastic cells, and all the free space between these cells is filled with a liquid acrylic mixture. The production of the baths themselves is carried out by casting. This technology today in Finland brought to perfection. Although at first quaril was used only as a raw material for the restoration of well-known acrylic and cast iron bathtubs. Over time, they began to produce independent sanitary items from the new material kvaril.

Kvarilovye bathtubs - a novelty in the plumbing market, they are predicted to be very popular over time

Advantages and disadvantages

Quarry baths have a number of obvious advantages:

1. A perfect appearance, which is achieved thanks to the rich, sparkling white color of the bathtub surface.
2. Material resistance to impact chemicals and mechanical damage.
3. Material durability. For a long time, it retains its snow-white appearance. Over time, yellowness and turbidity do not appear.
4. High sound insulation. When filling the bath with water, the noise level will be minimal.
5. Due to the pliability and elasticity of kvarila, a bathtub can be created in absolutely any shape and size. It can have both rounded edges and fairly clear lines and contours.
6. Due to the low thermal conductivity of the material, the filled bath does not cool down for quite a long time. And to the touch, unlike its predecessors, it is warm.
7. Large capacity compared to a similar acrylic bath due to the thinness of the walls.
8. Ease of care. To keep the bath in perfect condition for a long time, it is enough to wash it with a gentle agent once a week.

Soaking up in a quartz bath is very pleasant, because it perfectly retains heat!

Based on the listed advantages, we can conclude that acrylic bathtubs are able to completely outshine their predecessors: acrylic bathtubs. However, along with an impressive list of advantages of quartz bathtubs, this piece of plumbing, of course, has its drawbacks, among which the following can be distinguished:

1. Relatively high cost of products.
2. Vulnerability to abrasive cleaners. Despite its high strength, quaril does not like abrasive particles, as a result of which small, barely noticeable scratches can appear as a result of mechanical action.
3. The uniqueness of products. The fact is that at present only bathtubs are made from quartz, so it will be quite difficult to pick up other plumbing items, such as a toilet bowl or a sink in the same style.

It should be noted that quartz baths have appeared on the market quite recently, so many of the disadvantages of this material can be significantly minimized over time. The price due to the upcoming expansion of production may decrease, and from minor scratches, perhaps, they will come up with a special protective coating. In addition, manufacturers can expand production and begin to produce not only bathtubs, but also other plumbing items.

Manufacturers and cost

Today, a large number of manufacturers of quartz baths can be found on the worldwide network, but such a company as Villeroy Boch is considered the leader among them.

This company is German, but has one feature - historically French roots. Thanks to this original combination, the company combines French sophistication and high German quality. The history of the existence of this company has about 250 years.

At first, Villeroy Boch was engaged in the production of porcelain and ceramic sanitary ware. Today, one of the main directions of the company is the production of quartz baths. The company can produce these copies both built-in and free-standing.

Often, bathtubs of this company are equipped with additional useful functions, for example, massage. Massage in the bathroom can be either hydro or aero, depending on the preferences of the buyer.

Villeroy Boch has supplemented the production of quartz bathtubs with two powerful technologies, Ceramic Plus and Acivecare. Due to the Ceramic Plus technology, a perfectly smooth surface of the products is achieved, and thanks to the Acivecare technology, an antiseptic surface is created, which contains silver ions in its composition.

The manufacturer provides a 10-year warranty for all its products, which characterizes high quality of this product. The cost of Villeroy Boch quartz bathtubs varies on average from 30,000 to 300,000 rubles. It is noteworthy that the company has an extremely extensive geography of sales of its copies, has about 100 countries around the world.

It should be noted that the production of quartz bathtubs is a fairly new phenomenon, therefore, models of one or two companies are presented on the sanitary ware market. So, today only such a German company as Ukuson can compete with Villeroy Boch. Russian firms have not specialized in the production of such products so far.

In conclusion, it should be said that the appearance of quartz bathtubs has revolutionized the field of sanitary products. However, not every person in our country can afford to purchase such models, although in European countries quartz baths are quickly gaining popularity and becoming more accessible to average citizens. In Russia, for now, this item of sanitary ware remains in the elite category, so most of our fellow citizens basically install all the same acrylic bathtubs, which have their drawbacks, but are much cheaper. However, those Russians who have already installed similar products in their homes share the most flattering reviews about them.

Quaryl or Quaryl is comparatively new material in the sanitary ware market. It is used in the manufacture of shower trays and bathtubs. And in order to understand how kvaril differs from traditional materials used for the production of sanitary ware, you need to get to know its features and characteristics better.

What is quaril?

This is a composite material developed and patented by the German manufacturer Villeroy & Boch, obtained from acrylic, quartz, environmentally friendly polymer additives. The company's specialists did not set themselves the goal of creating raw materials for the manufacture of sanitary ware. Initially, kvaril was used exclusively as a means for restoration and repair. various models baths.

Quaryl demonstrated high performance properties. The promising potential of the composite has been thoroughly studied and developed. This has led to the fact that the raw materials previously used only for the repair and renovation of plumbing turned into a completely independent material, from which bathtubs and trays for showers and corners are produced. Today, quaril is positioned as a unique composite that differs from other analogues.

Features of the composition of quaryl

Quaryl represents a new stage in the development of composite materials for the production of sanitary ware. This is due to the composition, which affects the final quality of the products. The main components of quaril are:

acrylic resins. They make up about 60% of the total mass. They give the composite flexibility and plasticity at the processing stage. This does not mean that the final product retains these qualities. Trays and bathtubs produced from quartz acquire strength and rigidity.

Patented additives. They enhance all the positive properties that acrylic, which is part of the composite, has. This endows the quartz with brilliance, elasticity, excellent noise insulation, uniform rich color, smooth and non-slip surface.

Quaryl has successfully passed tests for strength, slip resistance, thermal insulation and sound insulation parameters. It fully complies with European environmental and safety standards and has been tested by the Tech Süd Technical Council to confirm that it is suitable for home use.

Production of products from quartz

Composite material is poured into a special matrix mold. The technology of such casting is one hundred percent accurate. Any drops or irregularities are completely excluded. The thickness of the walls, depending on the initial parameters, varies from 0.8 cm to 1.8 cm, and the bottom - up to 2.5 cm.

Plasticity and flexibility allow the final product to be given various shapes. This is not only strict geometry, but also smooth lines. The very structure of Quaryl is such that the formed surface has no seams and pores. Due to this, the composite does not absorb dirt, does not accumulate various kinds of debris, since it is devoid of joints, it is easily and quickly cleaned.

What are the benefits of Quaryl?

The unique composite material from Villeroy & Boch has many positive qualities that are appreciated by consumers using quartz sanitary ware for bathrooms:

• higher strength and impact resistance than acrylic;
• no possibility of accidental damage during installation and further operation;
• no difficulties in the process of use and care, which becomes possible due to the absence of pores;
• exclusive design and originality of forms that fit perfectly into any interior;
• streamlined internal lines, due to which the product inside is larger than it seems from the outside;
• full compliance with standard sizes, which does not cause difficulties when installing a quartz product;
• resistance to abrasion, thanks to which plumbing retains its attractive appearance;
• absolute injury safety, provided by the absence of a sliding effect on the quartz surface.

Bathtubs and shower trays are produced from kvaril. The first ones are of the greatest interest to the buyer, they are produced in various collections.

Quarry bathtubs and shower trays

They have a characteristic sheen that distinguishes this group of sanitary equipment from any other. They can be produced both in the classic version and equipped with nozzles and other elements for comfortable bathing procedures. High-precision casting makes any parts present in the design imperceptible. They merge with the material, which is reflected in the usability of Quaryl trays and bathtubs.

Baths deserve special attention. They can be round, oval, rectangular, angular, with beveled sides, hexagonal, have even or slightly “wavy” edges. And if acrylic products require preliminary installation of a load-bearing frame, they are installed directly on the base of the floor from quaryl. Design features Quarry baths allow you to install the faucet on the side, which fully meets modern aesthetic ideas about the interior of the bathroom.

What are the disadvantages of Quaryl composite?

The material demonstrates many positive characteristics, but is not without some disadvantages:

1. High price. The novelty of quartz, the almost complete absence of competition, the rather expensive production process and the presence of characteristics superior to traditional materials were reflected in the final price.
2. Relative strength. The composite is stronger than acrylic, but more brittle than steel and cast iron. A product made of quartz can only be damaged by a strong blow. heavy object. To do this in everyday life is possible only maliciously.
3. Extreme high temperature resistant. Quaryl, like acrylic, can warp when exposed to boiling water. This occurs with prolonged and frequent use of very hot water.
4. Limited product range. On sale you can find only quartz pallets and bathtubs. It is not yet possible to choose a complete set for decorating a bathroom, made of one material.

There are models of acrylic bathtubs without overflow and drain holes, which come with a cutter head with a drilling template. This expands the possibilities of planning a bathroom, but complicates installation.

Conclusion

Kvaril is an innovative German development that allows you to embody almost any design solution in the creation of bathtubs and shower trays without losing quality and performance characteristics. It is a great combination best qualities acrylic and increased strength of quartz, introduced as a component of the additive of this composite.
Such an innovation is not cheap, it is presented exclusively by European manufacturers, guaranteeing the high reliability of their products. The confirmation of the latter is the presence of a warranty period equal to ten years. The main thing, when choosing a quartz product, is to weigh the pros and cons of such an acquisition for the bathroom.

The now very popular acrylic bathtub has not been a curiosity for a long time. The desire to develop and improve modern technologies that allow leveling some of the shortcomings of acrylic bathtubs, steel products made of quartz. This is how acrylic bathtubs appeared, unlike their acrylic predecessors, they do not need to be installed on a frame and are more resistant to damage.

Quaryl was obtained by mixing a natural material - quartz flour and acrylic. It turned out to be more durable and durable, but with all this - unpretentious in care. The structure of the material can be imagined as many acrylic capsules with sand inside. And the space between the capsules is also filled with acrylic. This is an excellent material for bathtubs, an innovative development of a new generation. Bathtubs from kvaril - elite production which popularity grows.

In addition to the material itself, the production technology of such baths is also interesting. The production takes place not by vacuum forming, but by casting into a mold, which makes it possible to obtain products of any shape. Casting provides great creative freedom. The unique properties of the material make it possible to embody many design ideas: forms that cannot be created from other materials, kvaril accepts with ease!

There is no connecting seam in the quartz bath. The bath bowl has a small wall thickness - up to 2 cm, however, while its body is incredibly durable. Therefore, the design can be frameless. By increasing the thickness of the walls and the base, individual bath collections can have a frame, but these are quite rare cases.

Among the features of such products is a greater weight, in comparison with acrylic models. But in general, these are fairly light bathtubs, although outwardly such models look like solid cast iron ones. Among the important advantages is low thermal conductivity, due to which the walls will not heat up much, and the heat of the water will remain in the tank.

Among the wide variety of bathtubs, there are those that stand out from the rest. Such bathtubs are made from quartz, which has its own certain disadvantages and advantages, and acrylic and quartz baths differ significantly from each other, and there is a significant difference between them.

Quarry bathroom, like any other plumbing, has certain advantages and disadvantages.

First of all, it is worth noting the advantages, of which there are quite a few:

1. Aesthetics. The material is smooth, uniform and completely free of roughness.
2. Flawless whiteness and gloss.
3. Small mass. Bathtubs that use a material such as acrylic are lighter than quartz, but compared to the rest, quartz construction is the lightest.
4. The product has high rigidity. To install a durable quartz bath, you do not need to install an additional rigid frame.
5. The design has excellent impact resistance. The bathroom is absolutely not afraid of even the strongest mechanical impact.
6. The bath has excellent noise insulation, which is ensured by the presence of acrylic fiber in the polymer structure of the quaryl.
7. The product has low thermal conductivity. In such a container, the water will slowly cool down, and it will be possible to take water procedures with maximum comfort.
8. Long service life. Due to the strength and durability, the equipment will last a long time and will not bring problems.

Disadvantages - this is also what you should pay attention to, and there is one negative quality of quartz baths. And this is the cost. To be more precise, the product will be much cheaper than a natural stone bath.

However, among models made of steel, cast iron and acrylic, the quartz product will be the most expensive.

This is due to the fact that the manufacture of the structure requires the use of modern technologies.

In order not to be disappointed in the money spent and not to face such problems as the formation of defects after installing the quartz bath, you need to buy only the product that has certain certificates for compliance with GOST and SNIP standards.

In addition, there must be a document confirming the use of high-quality materials, so that later, when using high temperature water or when a heavy object falls to the bottom of the tank, there is no deformation in the form of a dent.

There is another drawback, but not significant. It lies in the fact that only bathtubs and some elements for shower cabins are made from quartz, and therefore it is almost impossible to assemble a single composition from a bathtub, sink and toilet bowl.

Types of baths from kvaril

Quaryl is a plastic material and therefore manufacturers have the opportunity to produce bathtubs of various shapes, from traditional to unrealistically creative, made according to a specific design development.

Basically, on sale you can find a bath:

• Rectangular;
• round;
• oval;
• corner;
• With bevelled sides;
• Hexagonal.

In addition, a bathtub made of quartz can be built-in and freestanding.

Most often, it is built-in plumbing equipment that is used, since such products are suitable for compact-sized rooms, which, most often, can be found in apartments of multi-storey panel houses of the Khrushchev type.

Free-standing structures are used for more spacious rooms, as well as for a specific design solution.

First, the legs are installed, then the bowl is installed, and the connection is made.

In general, quaryl bathtubs of any kind are special in that they do not have either an overflow or a drain hole. They are made independently after purchasing the equipment, and you can do it yourself using a diamond-coated crown.

We understand what is kvaril

What is quaril?

This is the material from which bathtubs of such models are made as:

• Villeroy;
• Boch;
• Oberon;
• Quaryl.

In particular, for the manufacture of these structures, a synthetic material is used, created by combining quartz sand and acrylic. It has a dense structure, and particles of quartz are wrapped in a plastic shell. The void between such particles is filled with acrylic.

Quaryl products have the advantages of acrylic bathtubs, in particular, plasticity, aesthetics and attractiveness.

The presence of quartz sand in the material increases strength, durability and wear resistance.

Kvaril was created a few years ago in Germany. The creator was the company Villeroy & Bosch. Quaryl was originally used for processes such as restoration and refurbishment. acrylic bathtubs that have lost their proper appearance or cracked.

After the quaril bath was made, numerous tests were carried out and it was proved that they could be an innovation in the field of sanitary ware manufacturing, they began to be made all over the world.

The production of bathtubs from kvaril is carried out by casting the material into a special form. Products are varnished, which gives the container an incredible glossy sheen, but the surface of the bowl remains non-slippery, which is especially important for a child or an elderly person.

What reviews does a quartz bath have?

Due to the fact that this is a novelty in the field of sanitary equipment, moreover, it is quite expensive, there are reviews about the products, but not in large numbers.

Quarry baths:

• Expensive;
• Began to be made relatively recently;
• They have only positive reviews.

In particular, those who had a chance to try a quartz bath note that the operation process does not cause problems, but only comfort, pleasure and maximum enjoyment.

Pleasant to the touch surface, instantly heated bath, and most importantly - long-term heat retention, this is what you need for water procedures. Stylish European bathtubs modern technologies, can amaze anyone, and will fully justify both the expectations and the funds spent on them.

In addition, it is worth noting that kvaril baths have original look, you can choose models by shape, size, decor and other parameters.

Modern manufacturers are constantly improving their quartz bathtubs so that consumers can only get real pleasure, and also do not complain about high prices.

The most important thing is not to be led by those who offer supposedly quartz quality bathtubs at a cheap cost. In fact, such plumbing equipment should be purchased only at specialized points of sale, where they can provide all the necessary documents that can confirm European quality.

Varieties of quartz baths (video)

Specialists in statistical research in the field of sales of sanitary equipment believe that quartz bathtubs have already occupied their own niche in the product group and will soon become the most sought-after products.