The brick is construction unary. Single building brick
People have long begun to use brick as a building material. For the first time it began to be produced in small private manufactories. As a result, each manufacturer had its own type of this building material. It differed from competitors' products not only in its composition, but also in size. Today, for the convenience of purchasing and to speed up the installation process of buildings, it is customary to produce building bricks in standard sizes.
Speaking about the standards of dimensional characteristics, it should be noted that the length and width of one section remains the same. In this case, the length is 250 mm, and its width is 120 mm. Changes, only the height of the brick. Brick building unary has a height of 65 mm. In addition to the ordinary, there are one and a half views and a double one.
A single view is used in the construction of walls, stoves and for finishing work. It has been proven that it is the ordinary type that is most suitable for facing work. In addition to size, brick building materials are classified by the type of material from which it is made and by the method of its manufacture.
Classification according to the type of material used affects the scope of the brick. For example, silicate brick is used for cladding, and classic red brick can be safely called a universal material. It is suitable for: construction of foundations, walls, furnaces and for facing works.
Preparing for a new construction, we have to find out two questions: how much does a building brick cost and how many pieces of it will be required. Quantity in pieces is calculated based on the area of the structure under construction. This value is necessary for placing an order, since the building brick is sold, the price is set by the piece.
Based on the small dimensions of one brick, it is clear that for the construction of any structure, more than a dozen materials will be required. That is why most construction companies prefer to order building bricks with delivery. You can pay for the order in several ways from payment by credit card to bank transfer, which is convenient for both individuals and legal entities.
| Average brick consumption | ||||
| unit of measurement | brick size | Excluding mortar joints, pcs. | Including mortar joints, pcs. | |
| 1 sq.m. masonry in 0.5 bricks (masonry thickness 12 cm) | 1 | 61 | 51 | |
| 1,5 | 45 | 39 | ||
| 2 | 30 | 26 | ||
| 1 sq.m. masonry in 1 brick (masonry thickness 25 cm) | 1 | 128 | 102 | |
| 1,5 | 95 | 78 | ||
| 2 | 60 | 52 | ||
| 1 sq.m. masonry in 1.5 bricks (masonry thickness 38 cm) | 1 | 189 | 153 | |
| 1,5 | 140 | 117 | ||
| 2 | 90 | 78 | ||
| 1 sq.m. masonry in 2 bricks (masonry thickness 51 cm) | 1 | 256 | 204 | |
| 1,5 | 190 | 156 | ||
| 2 | 120 | 104 | ||
| 1 cubic meter masonry | 1 | 512 | 394 | |
| 1,5 | 378 | 302 | ||
| 2 | 242 | 200 | ||
The single size red working brick is the result of the experience of many generations of professional builders. Its current size and weight parameters have been ideally matched by more than one century of building practice. This is the reason that single brick 250x120x65 does not lose its demand in modern construction and is an indispensable material that is not inferior in quality to the latest developments in the construction industry.
Appointment of a working single brick
A single brick is suitable for the construction of a wide variety of structures: external and internal walls, partitions, finishing works, as well as arches, vaults, columns or fences.
Due to its small size, it is best suited for complex and decorative brickwork. This property makes a single clay brick indispensable in the construction of private houses, cottages or buildings designed according to an individual project. At the same time, it is not inferior to any other building material in strength and resistance to aggressive environmental conditions.
Types and main characteristics
Brick single working size 250 x120 x 65 mm - the classic and most reliable material for the construction of buildings. Other parameters, such as weight, strength and frost resistance may be different depending on the plant where the brick is produced.
In our store you can choose at a price of 6 rubles. the most suitable option for your construction from different domestic factories:
- Mikhnevsky brick;
- Gololobovsky brick;
- Karasevsky brick;
- Aleksinsky brick;
- Lipkovsky brick;
- Bolohovsky brick;
- Lomintsevsky brick;
- Resurrection brick;
- Tula brick.
You can buy any single brick from the selection in the AllBrick online store at a low price by ordering through the form on the site, contacting a consultant online or by phone. We can also guarantee you fast delivery to the construction site by our transport in Moscow and the Moscow region. Payment for the purchase can be made after the delivery of the material.
Main characteristics
M-150Warehouse Petushki - Vladimir region
Type of size single 1 nf
Emptiness corpulent
Type of material silicate
Strength grade, kg/cm2 M-150
Weight 1 piece, kg 5.0
Size, mm 250x120x65 mm
Transportation
Quantity per pallet / piece 672
The brick has high strength, accuracy in geometric dimensions, relatively low cost and ease of use, which makes it the most affordable building materials on the market. It is used for laying load-bearing and non-bearing walls, for the reconstruction of residential and public buildings. Multi-storey residential complexes built using such bricks stand out from the monotonous typical panel buildings. Efflorescence does not appear on silicate brick masonry, which is typical for clay brick masonry. Only environmentally friendly local sand, lime and cement are used in production. It is not allowed: to use silicate brick for laying foundations and plinths of buildings below the waterproofing layer, exposed to ground and waste water. use sand-lime brick for the walls of buildings with wet operation use sand-lime brick for laying furnaces and pipes, as it does not withstand prolonged exposure to high temperatures.
Pickup from a warehouse in Moscow
If you need a small batch of goods (from 1 piece), and the goods are in stock, you can purchase the goods as soon as possible at one of the retail outlets:
Delivery to the site and unloading
We will deliver any required quantity of goods at a convenient time for you directly to the construction site. The cost of delivery depends on the volume of the order and the remoteness of the object from the manufacturing plant or warehouse. The unloading rate for small-tonnage vehicles is 30 minutes, for medium- and large-tonnage vehicles - up to 1 hour.
The Kirpich.ru company has its own vehicles and can offer customers the most favorable and convenient conditions for the delivery of goods on vehicles of various carrying capacities (from 9 to 20 tons), including those equipped with a crane-manipulator. To calculate the cost and delivery time, please contact the managers by phone +7 495 320-19-31 from 9 to 21.
You can read more about the terms of delivery on the page. Delivery.
In individual construction, bricks with a size of 250x120x65 mm are widely used for the construction of various structures. Different brands are given characteristics that most fully meet the operating conditions. Having the same size, they differ in weight not only within the allowed tolerance and humidity, but also due to the presence of voids, the raw materials used, and the manufacturing technology.
Vintage types of bricks
According to raw materials and production technology, the following types are distinguished:
- Ceramic. The clay firing method makes it possible to obtain durable moisture-resistant products 250x120x65 for interior and exterior work, laying foundations and load-bearing structures.
- Silicate. The technology of steaming sand with the addition of lime allows it to be used for above-ground walls, to which there is no access to abundant moisture (groundwater). In chimneys, it is placed in areas remote from the furnace, where the temperature of the exhaust gases is low.
- Hyperpressed. Pressure treatment of quarry screenings (dolomite, shell rock, marble, limestone) with the addition of cement gives a good product for cladding outside and inside buildings.
- Fireclay. A special refractory clay is annealed to produce a full-bodied stove brick used for laying fireboxes, interior lining of fireplaces and chimneys with high temperatures. It is able to withstand a large number of heating-cooling cycles. This quality distinguishes fireclay from a number of other refractories, which are suitable only for industrial use in the constant flame zone.
The letter designations that silicate brick has are read as follows:
- C - silicate;
- O - single;
- U - thickened;
- P - ordinary;
- D - decorative;
- L - front.
Examples: SOP, SUR, SLD, SUL.
Full-bodied ceramic bricks do not stand out with letters. The presence of voids is indicated by P, horizontal slots - by G. Strength (kgf / cm2) is indicated by the letter M with the corresponding value from 25 to 500. Frost resistance is measured in freezing and thawing cycles. Commonly used parameters are F15 to F75. In the passport characteristics, the manufacturer indicates the% water absorption and thermal conductivity (W/m²С).
The nominal weight of red brick according to GOST 530–2007 (dated 01.03.08) is 3.501 kg with its size 250x120x65. In fact, this figure for individual specimens ranges from 3.2 to 4.1 kg at the same price. The unit of account for the sale will be a pallet.
An example of what the manufacturer indicates in the technical description for the M150 brick is the following information:
- appointment - ordinary;
- type of raw material - ceramics;
- emptiness - full-bodied;
- color - red;
- surface - corrugated;
- size - 250x120x65;
- strength - M150;
- weight - 3.75 kg;
- frost resistance - 100 cycles;
- water absorption (not less) - 6.4%;
- thermal conductivity - 0.81 W / m²C.
If the laying is carried out in the heating structures of fireplaces, then it is better to choose ceramic M200 (250). The use of a block obtained during the dismantling of old structures for new construction is allowed only in the interior. In exterior walls or ovens, it will have an unpredictable service life, since it is not known how many heating and freezing cycles the material has experienced.
Number of bricks on a pallet
A correct calculation should take into account that the price is usually indicated per package. The number on different pallets (wooden boards for loading, transport and storage) may vary. The standard size has 2 meanings:
- Small. Dimensions - 0.52 × 1.03 m, load capacity - 750 kg.
- Big. Area - 0.77 × 1.03 m, can withstand weight up to 900 kg.
If the seller does not give information about how many bricks are in the pallet 250x120x65, then they use this method:
- the pallet area must be divided by the size of the larger face of 1 block (the number of pieces of the bottom row);
- multiply the result by the number of rows on the pallet.
According to the established standards, the load capacity on 1 pallet is 0.77 × 1.03 m.
The maximum weight can be:
- 420 pieces of single size 250×120×65;
- 360 facing (250×90×65);
- 390 one and a half (height 88);
- 200 double (250×120×138).
Fireclay straight brick has a size of 230 × 124 (114) × 65 mm and 297 (385) pieces are placed on its pallet.
The weight of the pallet is important when ordering vehicles to transport a large number of packages, calculating the number of flights and the cost of delivery to the construction site. A single silicate brick has a weight of 3.7 kg, one and a half - 5 (hollow 4 kg), double - 5.2. Ceramic products 250 × 120 × 65 mm weigh: hollow - 2.6, full-bodied - 3.6, shortened - 2.1 kg. A full euro pallet with 275 pcs of a single block (3.7 kg) has a net weight of 1017, gross weight of 1032 kg. Hollow has less weight, so it fits on pallets more than the same size full-bodied.
Masonry volumes
For 1 m3 of masonry, 500 pieces of full-bodied single products are needed. Their weight will be approximately 3.38-3.694 tons. A single hollow worker weighs 2.3-2.5 kg and 2.36-2.566 tons will be required for a volume of 1 m3. A conventional facing block and its decorative counterpart have a weight of 1320-1600 g, for a volume of 1 m3 you need 1.35-1.64 tons.
- Half brick - 51/61 pcs.
- 1 brick - 102/128.
- 1,5 – 153/189.
- 2 – 204/256.
- 2.5 - 255/317 pcs.
There is a furnace block with a size of 230 × 125 × 65, which is considered an obsolete standard. Some masonry schemes of furnaces and chimneys are designed for it, so the required consumption per 1 m2 will be according to the project.
Price offers
Large construction companies, manufacturing plants may indicate the price not in pieces, but per pallet, or set a minimum lot for sale. In trading houses at retail they offer products by the piece. The upper bar is held by clinker, which combines the characteristics of high strength, fire resistance and decorative appeal for facades and interiors.
| Size 250×120×65, mm | Minimum order rub/piece | Price, rubles |
| front full-bodied red M300-M500, VKZ | 1 | 61 |
| ceramic Lode Brunis full-bodied | 10000/1000 | 83 |
| full-bodied Voskresensky KZ M-150 | 2680/200 | 13 |
| ceramic Lode Dzintra solid | 10000/1000 | 125 |
| ordinary corpulent M-150, VKZ | 1 | 11 |
| clinker Lode Janka full-bodied smooth | 1 | 125 |
| ceramic full-bodied Lode Brunis smooth | 1 | 89 |
| front hollow red M-150, Vorotynsk | 1 | 13 |
| building silicate solid unary M150, | 1 | 17 |
| ceramic Lode Herkules hollow | 10000/1000 | 57 |
| fireclay refractory straight ShB-8, 250x124x65 | 1 | 50 |
The cost of the purchase can vary significantly depending on the remoteness of the region in relation to the manufacturer of the product, the weight and volume of the cargo. It is necessary to agree on all essential terms of delivery with the carrier.
Wholesale discount for a large batch reaches 15% and depends on the seller company. The cost of the material includes the purchase of the pallet itself. The average price is about 200 rubles per 1 piece. Systematic purchases of bricks may include the exchange of empty pallets for full ones.
