Saw blades for reciprocating saws makita. Makita reciprocating saw blades. Areas of use and design features of saw blades
The reciprocating saw works with a fairly wide range of materials. This tool cuts wood of different hardness species, concrete, plastic, drywall, as well as metal (copper, aluminum, stainless steel). The saw owes this versatility to both the possibility of stepless adjustment of the number of strokes of the cutting blade, and the ability to select these same blades, depending on their specification.
There are two types of reciprocating saw blades: specialized and universal.. Specialized blades, in turn, are conditionally divided into subspecies, depending on the material they process: canvases for wood, ceramics, metal, etc. All blades differ from each other in the material of execution and shape.
With materials, it would seem that everything is simple - since for long-term and high-quality work, the canvas should not quickly become dull, it is necessary to use solids and alloys. But with hardness, the degree of brittleness also increases - when working with materials that are heterogeneous in consistency, the blade can easily break. Here it is very important to find a reasonable compromise, and to get the ideal ratio of rigidity and ductility. Specialists of Makita pay special attention to saw blades, since the efficiency of the tool depends on the quality of these consumables.
Areas of use and design features of saw blades
Before buying a Makita reciprocating saw blade, carefully consider its shape and tooth design, as this affects the accuracy and speed of sawing.
The length of the saw blade can be different - from 100 to 350 mm. Long blades (up to 350 mm) with uneven large teeth are used to work with wood of various species. Blades of slightly shorter length (up to 280 mm) with fine teeth - suitable for cutting insulating materials and wood. Blades with large teeth are used for cutting loose drywall, concrete and plastics. In the case when it is necessary to cut a metal surface, blades up to 130 mm long with fine teeth are used. Note that the blades, whose length does not exceed 160 mm, are the most convenient to use. To work with longer blades, the operator will need some experience and skill, since vibration can cause the blade to swing, which affects the accuracy of the cut.
The sparse large teeth of the blade edge provide a high cutting speed, while the frequent fine teeth help to carry out a better surface finish, but at low speeds. For shaped sawing, it is most convenient to use a special narrowed blade for Makita reciprocating saws.
The reciprocating saw works with a fairly wide range of materials. This tool cuts wood of different hardness species, concrete, plastic, drywall, as well as metal (copper, aluminum, stainless steel). The saw owes this versatility to both the possibility of stepless adjustment of the number of strokes of the cutting blade, and the ability to select these same blades, depending on their specification.
There are two types of reciprocating saw blades: specialized and universal.. Specialized blades, in turn, are conditionally divided into subspecies, depending on the material they process: canvases for wood, ceramics, metal, etc. All blades differ from each other in the material of execution and shape.
With materials, it would seem that everything is simple - since for long-term and high-quality work, the canvas should not quickly become dull, it is necessary to use solids and alloys. But with hardness, the degree of brittleness also increases - when working with materials that are heterogeneous in consistency, the blade can easily break. Here it is very important to find a reasonable compromise, and to get the ideal ratio of rigidity and ductility. Specialists of Makita pay special attention to saw blades, since the efficiency of the tool depends on the quality of these consumables.
Areas of use and design features of saw blades
Before buying a Makita reciprocating saw blade, carefully consider its shape and tooth design, as this affects the accuracy and speed of sawing.
The length of the saw blade can be different - from 100 to 350 mm. Long blades (up to 350 mm) with uneven large teeth are used to work with wood of various species. Blades of slightly shorter length (up to 280 mm) with fine teeth - suitable for cutting insulating materials and wood. Blades with large teeth are used for cutting loose drywall, concrete and plastics. In the case when it is necessary to cut a metal surface, blades up to 130 mm long with fine teeth are used. Note that the blades, whose length does not exceed 160 mm, are the most convenient to use. To work with longer blades, the operator will need some experience and skill, since vibration can cause the blade to swing, which affects the accuracy of the cut.
The sparse large teeth of the blade edge provide a high cutting speed, while the frequent fine teeth help to carry out a better surface finish, but at low speeds. For shaped sawing, it is most convenient to use a special narrowed blade for Makita reciprocating saws.
Makita blades for reciprocating saws, almost any reciprocating saw, can be said to be excellent, as they are universal and suitable for many brands of reciprocating electric saws.
Of course the price is affordable
but sellers try to rip off the buyer as much money as possible than they are actually worth.
You can cut almost anything with these blades, within reasonable limits.
Plastic, non-ferrous metal, metal, wood, rubber, steel cable, in general, anything, if only the size of the thickness of the object would allow.
The dimensions of the canvases are average 225x19x0.9 mm No. 9, there are other sizes both larger and smaller, and there are 5 of them in a package, one canvas costs about 200 rubles, and it is enough for a couple of cuts for metal or a month for wood , this is provided that it does not break and does not become dull from overheating, well, or it happens that the canvas again bends from overheating.
The fact that the canvases of the Japanese manufacturer is stated on the packaging, but most likely, like everything else, this is China.
With such canvases, for example, you can saw any boards or firewood and are not afraid that, for example, a nail or a self-tapping screw can get there, the canvas will cope with its task perfectly well, it has nothing to cut through these obstacles, just like clockwork.
The bent blade can be used again, unless of course it is tapped with a hammer on the anvil and not on the teeth, since you can violate the factory setting of the teeth by placing them in one row.
Even blades without teeth can be used as a blade on foam, which means they will be in demand even after their service for their intended purpose.
The cost is prohibitive also because the sellers are trying to cash in on the buyer as much as possible, i.e. their greed, as well as the fact that such an instrument has recently appeared on the instrument market and until the market is saturated, the price is hardly lower -whether there will be, well, plus imports, not a domestic manufacturer.
The packaging is informative, hermetic, the number of paintings in the package is 5 pieces, the cost of the package is almost 1,000 rubles.
The blades are suitable for most reciprocating saws, but if you remake the shank for your reciprocating saw, then you should take such blades, the quality is quite excellent.
Of course, there are canvases of a domestic manufacturer, they began to appear not so long ago, but they are much more expensive and brittle, and these, for example, are great for reciprocating saws of the Interskol brand, so you can buy safely if you have a brand of such a saw.
Video review
| All(5) |
|---|
 Saber saw blades |
Makita Online gives gifts to its customers. Only in our online store, when buying Makita battery equipment, you can get a branded tape measure, and when buying Makita gardening equipment, you can get a branded baseball cap...
Official dealer
Working with us, you are guaranteed to purchase only original goods of genuine quality. We work with all types of payments. Only by purchasing goods from an authorized dealer, you are insured against fakes. We look forward to our long-term cooperation...
100 year warranty
We are fully confident in the quality and reliability of Makita professional power tools, having our own authorized service base for the repair of power tools, we offer our customers an extended warranty from the Makita Web LLC service center in Moscow...
Convenient repair
Makita Web LLC service center offers an exclusive service called Convenient Repair. Having its own delivery service, Makita Web LLC is ready to deliver the failed Makita electric and petrol tools to the service center absolutely free of charge...
Customer Reviews
The key to our successful growth is the quality and professional level of service in the sale and service of Makita tools. Letters of thanks and recommendation from our clients confirm the professional and professional level of services for the sale and maintenance of Makita tools. This is confirmed by the letters of thanks and recommendation from our customers and the professional level of services for the sale and maintenance of Makita tools. As confirmation of this, letters of thanks and recommendation from our customers...
Return 365 days
Makita Web is ready to accept or exchange the goods purchased from us within 365 days without giving a reason, if the goods are of good quality, have not been used and the presentation is preserved.
Tool rental
If the task is to carry out repairs, assembly, dismantling or other work, then it is often cost-effective to rent a power tool. The use of high-quality original products guarantees the completion of work on time.
Gift cards
If you do not know what to buy for your beloved husband, good boss or best friend, order a gift card and he will choose what he really needs. Gift card holder can order essential tool with home delivery.
