Gsm systems smart home. Smart home on xital-gsm. Sensors of important indicators
The KSITAL GSM system can be safely called a SMART HOUSE for the thrifty. Using the GSM channel, the system allows you to send messages and receive commands from the owner. Its capabilities allow the owner to organize country house simultaneously a large number of features for safe and comfortable monitoring and control.
The Xital system has 3 controlled relays that allow, in on-off mode, pulsed at a specified interval, automatically control various engineering equipment. If the relays built into the system are not enough to fulfill your task, it is possible to expand these functions using extension blocks. Maximum amount controlled relays - 35 pieces. It is important to understand that magnetic starters or contactors must be used to control power equipment.
The Xital system kit includes a 220V adapter that feeds the system and a wire for connecting a 12V backup battery. In the event of a 220V power failure, the system automatically switches to power from a backup battery and reports the event to the owner. After the restoration of 220V, the system will report this and charge the battery.
The Xital system has 4/8/12 control zones to which you can connect sensors of various purposes, which close or open their output relay when triggered. By connecting a security sensor to the control zone - an IR sensor of movement, volume, door opening, glass breaking, etc., we will receive security system, which, when the sensor is triggered, sends an alarm message to the owner, rings and turns on the siren. The concept of GSM signaling has a wider meaning - Xital transmits a message not only about the intrusion, but also about the leakage of water, gas, smoke, etc.
Xital monitors the room temperature in real time for a user-defined interval, reporting it to the phone. This is extremely important for owners of heating systems - after all, when they are turned off, you can defrost the house. Also, for temperature monitoring in server rooms.
The vast majority of boilers have an input for a control relay thermostat. By connecting the output relay of the Xital system to this input, setting its operation according to the temperature sensor located in the desired room, we will get a remotely controlled thermostat. The owner sends the temperature to the system from his phone, changing it depending on the need to save coolant or a comfortable level of heat. After setting, maintaining the desired temperature is carried out automatically by the system.
ALFA-S1 a new generation of modern devices that combine the functions of a security alarm and " smart home". Property security, access control, climate automation, lighting control, electrical appliances, video surveillance - a short list of functions that this compact device supports.
WIFI, GSM, GPRS, connection. The device is controlled via mobile app in your smartphone connected via WIFI connection. In the absence of an external router, the device interacts with a smartphone via a GPRS connection. In addition to the Internet connection, the device operates in GSM connection modes via SMS messages and voice dialing.
IP WIFI video surveillance. The device hardware supports the operation of several. Video monitoring of a protected facility is a modern standard for personal security.
GSM alarm. Up to 100 (wireless detectors 433 MHz), (wireless siren 315 MHz), up to 100 and . The device informs the user through push messages about any incidents at the protected facility, about the power supply status of external detectors, about the presence or absence of mains power. In addition to push messages, the system dials up to 6 specified numbers, and also sends SMS messages to 2 assigned numbers. When arming, the system interrogates the sensors and informs about open windows or doors. Works in all modern modes GSM alarms: full / partial setting, audio monitoring of the protected object, intercom. The device supports the function of the doorbell and the function of the sound informant for the front door.
Smart House. The device supports 100 and . The device can be programmed with 8 scenarios and 20 dependencies. An example of the possibilities is the following scenario: you enter your house, the light in the room will automatically turn on and, for example, the heating. The next example: turning various electrical appliances on or off according to a schedule. The device can be configured to work with a heating system, boiler control, heaters or electric batteries. Great opportunities are provided for customization various systems: irrigation management, mechanization of greenhouses, access control, etc.
Specifications:
Input voltage: 5V 2A
Idle current:<200 ма
Current in alarm mode:<300 ма
GSM networks: GSM 850/900/1800/1900 MHz
Backup battery: 1050 li-on
Operating time on the battery, in case of power failure - 7 hours
Range of connected external devices up to 100 m
Sensor connection frequency 433 MHz
Contents of delivery:
Alarm - 1 pc.
Power supply - 1 pc.
Wireless motion sensor - 1 pc.
Wireless door/window opening sensor - 1 pc.
Remote control - 2 pcs.
Wireless call button - 1pc
Instruction in English - 1 pc.
I never set myself the task of creating a "smart" home, but since I was a prof. a developer of complex electronic systems, and you can’t just drink away skill, then, I think, I have already succeeded. And - not expensive, obedient and persistent. And my mind is enough ...
Naturally, he did not invent "bicycles" much and did not work with a soldering iron, but bought ready-made devices, well understanding what and why. Moreover, everything is relatively inexpensive and no frills such as motion sensors in each room, or centralized light control - is it too lazy to turn off the switch behind you?
The main thing is a reasonable combination of centralized systems and autonomous ones. There are systems that should be centralized - information and security, for example, or a backup / autonomous power supply system. But very often, simple separate "helpers" are needed - light on motion sensors exclusively in special rooms, systems for turning on / off devices by separate ones (for example, in bio-sewerage, washing hoses and draining purified water), etc.
Also important is the competent redundancy of subsystems and the survivability of the entire system as a whole ("resilience").
As a result, in the house I have: 1. Two backup power systems - and (an additional, less powerful one - from its design a simple, well-thought-out system for ensuring economical automatic heating of the house in winter in the absence of people, including automatic switching on of backup heating on electricity (in case of failure of the gas heating system and both PSAs Without backup power, all automation is meaningless ...
2. Security-fire-information-control GSM system ().
From the phone he controls the start of the boiler and the three-way valve, and also transmits information to me from a dozen sensors (zones). Without knowing what is happening in the country in the absence of people, it is somehow dumb ...
3. Autonomous radio outlet (not GSM, but low-power, 450 MHz (1000 rubles set) for controlling the discharge of purified water from the bio-sewer at a convenient time for watering her garden (I use only biodegradable products for washing hands, head, dishes), and also in the same place - turning on the flushing of the system by a separate timer (300 rubles / piece) at a convenient time... Well, turning on the sewer compressor by timer - to save the compressor resource, and at the same time electricity.
4. A couple of autonomous motion sensors to turn on the light - on the stairs and in the kitchen (almost exclusively for night trips to the toilet).
5. Several (200 rubles / piece) with pre-laid antenna cables - for the ability to quickly transfer any of the 3 TVs and 2 receivers to a room convenient for people.
6. Protection of the supply network from lightning by SPDs, Czech, Hakel company (10 t.r.).
7. Innovation from the underground riser. I will duplicate it with a "winter automatic valve". Of course, the riser is insulated, however, understand and be confident that it will never freeze there is no possibility. All this is to "guarantee" the non-freezing of water in the riser when leaving the dacha for several days or weeks, or even (once - months). Two thousand rubles for such a guarantee - practically - mere pennies.
8. from frost in the presence of people.
Well, and a bunch of small useful things like systems that scare away mice / rats (just in case, so that they don’t even try to settle down for the winter) and ants on the site so that aphids do not breed on currants.
About tenacity:- In winter, in case of a network failure (in the absence of people), the PSA at home will provide energy to the boiler, bio-sewerage and security system for about 4 days, after which the PSA of the boiler enters into battle - it will "keep" the boiler and the security system for another 1-2 days.
By the time the battery is discharged in the PSA at home, I will receive a message on my phone about this.
- Further (if I don’t come and solve the problem), the house will cool down for at least a day until the water in the toilet freezes, which I have protected by a proven method and will never burst.
- Further, the water in the boiler, left in it since autumn and heated by the boiler to 50-60 ° C in normal mode, will begin to cool - until it freezes for several days. There is no water in the pipes (we only have water in summer).
- In the event of a heating system failure, but if there is a network, the bathroom will be heated by a fan heater according to the "Temperature alarm" signal from the thermostat.
- In the event of a PSA failure at home, but in the presence of a network, the PSA of the boiler works and is charged directly from the network.
- Emergency events for which I will receive a GSM notification on my phone (I switch the phone to a mode at night in which it rings only for messages from my house):
- PSA batteries at home are discharged up to 20%,
- the voltage at the output of the SRP at home is turned off,
- bathroom temperature alarm,
- an accident in the bio-sewer,
- water leak,
- smoke in the house,
- the temperature of the underground riser is below normal,
- signals from several security sensors.
Convenience: In winter, from "any" place on the planet, I can turn on the boiler to warm up the dacha before arrival.
Almost everything works automatically, the rest is very easy to explain to women (I set myself the goal of the simplest operation of the house by "unqualified personnel"). For example, in the summer, if the water in the boiler has cooled down, then at 6 in the morning (so as not to add temperature during the day) the boiler will turn on for 25-40 minutes to heat it (in winter it heats up anyway).
In the plans (in terms of automation and protection):- I make lightning protection - I welded a lightning rod to the casing pipe of the well, because it is an excellent grounding, I thought over almost the entire design of the external lightning protection (the internal one was made),
- autonomous (from buttons and a servo drive) opening-closing of the access hatch to the 2nd floor (to save heat and cold on the first floor, for example, at night and in the absence of people) - the only air conditioner in the house will be above the hatch, and the hatch will be limited or no flow of cold air down and warm (in winter) up,
- cellar (with temperature control at two points (Ksitalom) and possibly humidity),
- I'm getting close to the Bioxi bio-sewerage technology in the non-maintenance mode (full automation). Well, at least - increasing the service period at times.
In my opinion, all this is quite enough for a house that should not be smarter (and, most importantly, more expensive) than its owner. And therefore it is better to call him obedient, as someone on this forum very successfully suggested. And I will add - also persistent, like the famous Tin Soldier!
Smart House. Turnkey solution Country house automation
Tasks of EctoControl:
- control of heating (control of air temperature and humidity in the room, heating of the house);
- timely informing in case of change of the set parameters;
- saving on the consumption of energy resources: electricity, gas, water;
- security and protection of property
To solve these problems, an easy-to-install and user-friendly EctoControl automation and control system was used. AT there is functionality and system settings are supported by mobile applications for Android and IOS
And so what we got:
- management and control through the application or personal account Ectocontrol(possibility of dispatching);
- timely informing in case of changes in the specified parameters (allows you to respond quickly);
- temperature and humidity control in the room;
- remote control of electrical appliances (thermal curtains, gates, ventilation, etc.);
- gsm heating boiler control - saving gas / electricity;
- safety (control of water leakage, gas leakage, pressure in the pipe, the presence of a voltage network);
- using the phone, you can shut off the water / gas supply in case of a leak;
- security (motion sensors; on windows and doors);
- ip video surveillance (street and indoor cameras)
After installation and configuration to the system were connected:
- control unit for automation and dispatching system ectocontrol;
- wireless temperature sensors (temperature control);
- wired air humidity sensor (air humidity control);
- wired heating manometer (pipe pressure control);
- wireless motion sensors (property security);
- light and sound alarm (property security);
- wireless socket 220V / smart socket gsm (remote control of electrical appliances);
- wireless indoor Wi-Fi video camera (video surveillance);
- powerful remote GSM antenna (signal improvement with weak GSM coverage).
- wireless water leakage sensor (water leakage control, water leakage protection);
- wireless removable electric drive for taps (shuts/opens water/gas supply);
- wired liquid level control sensor (liquid level control in various tanks);
- wireless light and sound smoke detector (reacts to the appearance of smoke in the room);
- wireless door/window opening sensors (real estate security);
- splitter of contact sensors (increasing the possibility of using the system);
- wired temperature sensor (temperature control);
- wired temperature sensor in the sleeve (temperature control);
- wired sensor for the presence of a network of 220V (control of the presence of current in the mains);
- wired gas leak detector (property safety).
RF production. Warranty 1 year. Self-installation possible
If necessary, you can complete and expand the functions of using the automation and control system at your discretion and continue to manage using your phone. There is the possibility of interaction with previously installed systems (ventilation, air conditioning, irrigation, etc.)
What is the most important thing in any home? Definitely safety. Our home is our fortress, but this is possible only if we feel protected in it. And the systems, or GSM modules for the "smart home", will help in this, in a wide range presented in our online store:
Integrated management. It is carried out using a central control unit. Allows you to monitor temperature, control sensors for water leakage, gas, movement, mains voltage, lighting and others. In case of any emergency, they will notify you by phone about the problem. You can also submit your own request. Through the unit, you can control all the sensors installed in the house, regardless of their number.
Magnetic key. With this device, you can automatically arm and disarm the security system.
Light and sound annunciator. This device will instantly inform you about any abnormal situation. It is enough just to set it up in advance and indicate in which situations it should work.
We offer GSM modules for "smart home" from leading manufacturing companies - EctoControl, E-Robot, Strazh.
Sensors of important indicators
In the "smart home" you can install just an unthinkable number of sensors. Our online store has a wide selection, so you will surely find what you need with us.
We are offering to you:
Temperature sensors, natural gas leaks, water leaks, liquid levels in various tanks. They monitor the set parameters and will inform you in case of any failure.
AC contactors. Allows remote control of electrical equipment.
We draw your attention to smart room control systems. These are the integrated control blocks:
monitor the leakage of water, gas, smoke, etc. and instantly signal this by phone or via SMS;
have a room temperature sensor;
perform a security function using a motion sensor - they react to the opening of doors, gates, etc.
In any non-standard situation, the system will notify you by phone or SMS.
Our range of GSM modules for "smart home" can be found on the pages of the sites, and to find out more detailed information about a particular product, please call. Our managers will give you comprehensive advice, conduct a comparative analysis of the systems and help you make the right choice.
