GSM smart home. GSM solutions for smart home. You can also receive SMS notifications about emergency situations, water or gas leakage, boiler shutdown, disarming, motion detection on the site, etc.

ALFA-S1 a new generation of modern devices that combine the functions of a security alarm and " smart home". Property security, access control, climate automation, lighting control, electrical appliances, video surveillance - a short list of functions that this compact device supports.
WIFI, GSM, GPRS, connection. The device is controlled via mobile app in your smartphone connected via WIFI connection. In the absence of an external router, the device interacts with a smartphone via a GPRS connection. In addition to the Internet connection, the device operates in GSM connection modes via SMS messages and voice dialing.
IP WIFI video surveillance. The device hardware supports the operation of several. Video monitoring of a protected facility is a modern standard for personal security.
GSM alarm. Up to 100 (wireless detectors 433 MHz), (wireless siren 315 MHz), up to 100 and . The device informs the user through push messages about any incidents at the protected facility, about the power supply status of external detectors, about the presence or absence of mains power. In addition to push messages, the system dials up to 6 specified numbers, and also sends SMS messages to 2 assigned numbers. When arming, the system interrogates the sensors and informs about open windows or doors. Works in all modern modes GSM alarms: full / partial setting, audio monitoring of the protected object, intercom. The device supports the function of the doorbell and the function of the sound informant for the front door.
Smart House. The device supports 100 and . The device can be programmed with 8 scenarios and 20 dependencies. An example of the possibilities is the following scenario: you enter your house, the light in the room will automatically turn on and, for example, the heating. The next example: turning various electrical appliances on or off according to a schedule. The device can be configured to work with a heating system, boiler control, heaters or electric batteries. Great opportunities are provided for customization various systems: irrigation management, mechanization of greenhouses, access control, etc.

Specifications:
Input voltage: 5V 2A
Idle current:<200 ма
Current in alarm mode:<300 ма
GSM networks: GSM 850/900/1800/1900 MHz
Backup battery: 1050 li-on
Operating time on the battery, in case of power failure - 7 hours
Range of connected external devices up to 100 m
Sensor connection frequency 433 MHz

Contents of delivery:
Alarm - 1 pc.
Power supply - 1 pc.
Wireless motion sensor - 1 pc.
Wireless door/window opening sensor - 1 pc.
Remote control - 2 pcs.
Wireless call button - 1pc
Instruction in English - 1 pc.

A smart home controller will help ensure stable and smooth operation of all systems in the house. This device is designed to control household appliances, lamps and other elements. All programs are stored in the controller's memory, thanks to which the equipment performs its functions. Another task of the smart home controller is to synchronize all smart home systems with the mobile device of the owner of the premises, office, home and others.

What can the product do, and what are its capabilities?

All modern smart home control and management devices are equipped with sensors. With their help, you can analyze the state of health of systems. He also decides how to complete a given task at the lowest cost.

This product has a lot of features. With it, you can adjust the brightness of lamps and other light sources, run a shower or take a bath, turn on a toaster or kettle. Also, the smart home control controller can:

• Control the operation of ventilation and air conditioning systems.
• Start and turn off heating sources (column, heaters).
• Block windows and doors.
• Adjust blinds and shutters.
• Turn on multimedia systems and other settings.

An important step in the selection of devices is the definition of product requirements. They are usually divided into two groups: with the expansion option and multifunctional. It is possible to transfer information from one device to another and to the controller via the Internet or wireless connections.

Installation of such elements of a smart home is carried out by professionals. There are no difficulties with installation. In case of failure, repair and service is easy to do.

Advantages

The main advantage is the quick completion of tasks. Also, the advantages include work without the participation of the owner. You can program appliances to turn on when you arrive home, or turn on the heating when you are at home and turn it off when the house is empty. This saves power consumption.

You can buy a smart home controller in a Rusmarta specialized store. We offer favorable terms of purchase, a guarantee for goods and low prices. Terms of payment and delivery will suit every buyer. You can pay upon receipt or pay in advance. Delivery is carried out in all regions of Russia.

You can always buy a set of smart home Guard from us at a bargain price from the manufacturer.

Alarm GSM Sapsan GSM PRO 6 "Smart Home" is not only a burglar alarm, but also control of various devices with great variability places of use:

Private use:

• country houses and cottages (object security)
• cottages, apartments, garages and private warehouses (irrigation/heating/light control)
• retail outlets/services (landline mobile phone)

For business:

• retail points of sale / service provision (access control / security of the premises)
• production / warehouses (temperature control of warehouses / greenhouses / cold stores)
• office premises (connection with the premises)

Features of the security system:

"Smart home" control of any electrical appliances. The alarm system has 8 programmable outputs: - 3 "dry collector" type relays - 5 "open collector" type, which allow you to connect up to 8 different electrical appliances, sirens and other controlled devices.

You can set the devices to turn on and off by SMS command, by alarm, by schedule, by sensor readings.

Heating control.

It is possible to connect 6 to the system, thanks to which heating control will be carried out. The sensors operate in harsh temperature conditions from -55°C to +125°C and control the premises by value or by thresholds. The temperature request can be made at any time. It is possible to organize the control of electrical appliances depending on the temperature values. Control is possible by command and by schedule (timer).

12 wireless zones. An unlimited number can be connected to them by distributing and naming zones. When any sensor is alarmed from the zone, a message is sent with the number of the triggered zone or/and a call is made. Messages are sent to the user in Russian. The text of messages can be changed. The division into zones helps to create the security structure you need. Zones can be renamed to make it easier for you to navigate and understand where the alarm came from, for example: "kitchen", "corridor", "living room", "attic" or "fire", "glass break", "gas leak" and others .

"Partial protection" and 24-hour zones. The "Partial protection" function allows you to protect the desired part of the room, for example, while you sleep sweetly on the second floor at night, at this time the first floor continues to be protected. 24-hour security will allow you to leave a pre-programmed zone, for example, "Fire", when the alarm is "disarmed" and remain on guard and carry out a vigilant service to ensure the safety of your property.

4 wired zones. In Sapsan GSM Pro 6, up to 10 zones can be daisy-chained to each wired zone. When wired sensors alarm, the signal is transmitted to subscribers' numbers (10 numbers) pre-recorded in the device's memory in the form of text messages or a call. Zones can also be renamed. Use for perimeter protection or outdoors is only possible with wired and detectors, since the battery is not able to work in harsh Russian conditions.

Power supply control. If the 220V network is disconnected or interruptions in its supply, the Sapsan GSM Pro 6 alarm system will report a power outage or restoration at the protected facility by sending a text message to your phone. In case of a power failure for less than 12 hours, the controller will continue, as the alarm has a built-in battery up to 12 hours. It is possible to increase the autonomy with the help of an additional battery with a larger capacity with a standard of work up to 1 week using

Two-way audio communication. The presence of a built-in microphone and speaker helps to organize two-way communication. Making a call from the controller to a phone. The controller can be used as a fixed cell phone. The GSM alarm provides the ability to connect an external microphone to listen to the protected object. You can place it in any place you need, thanks to the "cellular landline phone" function, you can call and find out in real time what is happening in the room. And when you connect an external speaker, you can use it as a speakerphone or to frighten intruders.

"House on guard". The alarm provides the ability to connect a remote LED, for example. First of all, this is necessary so that when you leave the house, you make sure that the security alarm is turned on. In another case, the LED produces a psychological effect that scares off the "hooligans", and the attacker ten times think before invading your home.

Arming / disarming the GSM alarm Sapsan Pro 6.

There are several ways to arm/disarm:

SMS (via mobile phone)

Control panel (after entering the password you set and the controller will arm)

Keychain (similar to a car keychain)

Timer (set your desired arming/disarming schedule)

Touch Memory key (Only in this Sapsan wireless controller it is possible to connect a Touch Memory key reader via the Z-5R Controller).

SOS function. Each arming/disarming key fob is equipped with an SOS panic button. You can send an alarm at any time.

Personal remote. Do you want to know when an employee left the office/warehouse or a child came home? Each key fob is numbered and you will receive a message which key fob has armed/armed the system. Give the child, for example, keychain number 3, now you will know what time he came from school or whether he set the house on guard when leaving for training.

wifi surveillance camera It is possible to connect to SAPSAN GSM Pro 6 a wireless video surveillance camera with an alarm input, for example. Then the kit gets the opportunity to also record video on the triggering of sensors connected to the alarm.

Settings and installation.

LED display. The presence of the display greatly simplifies the operation and configuration of the controller. The intuitive interface is similar to the menu of a mobile phone. It displays all the necessary information about the state of the controller: name, control panel firmware version, GSM signal level, date/time and security status.

Balance request. At any time you can check the balance on the SIM card of the controller, if this service is supported by your operator. This is necessary so that at the time of the alarm, the system can send you a notification. With a negative balance, she will not be able to report emergencies at the facility.

The event log. The controller can save the last 20 events about the operation of any zones (sensors). At any time, you can view the latest alarm messages on the control panel.

Instructions and software already included. Lightweight and intuitive. Configuration of the controller parameters is possible with the help of: - SMS messages - a special tuner program installed on your personal computer - from the buttons on the control panel (limited sufficient set of settings) All system settings via SMS messages, as well as work through the program - the tuner is described in detail in the manual .

Software for Android. Install the special software for Sapsan GSM Pro 6 GSM alarm system on your smartphone and you can easily manage the controller status. You don't have to enter SMS commands. Just press the desired button. Download the app for Android!

Sapsan GSM PRO 6 has collected the best qualities of previous versions of the Sapsan line. Modern technologies and capabilities of this smart control panel have already been appreciated by our customers. Join and you!

Software Requirements

• Windows XP SP3 // Windows Vista/7 (32bit-64bit)
• 1GB RAM
• Pentium 4 // Athlon 64 x2 (2.22GHZ)
• 8x CD-ROM

GSM alarm in the Smart Home system is more of an addition to the security system and smart home than a separate element. The GSM module from the MimiSmart company has a huge number of functions, but first things first.

GSM alarm system allows you to send messages about emergency situations to one or more numbers. For example, to the number of the responsible person or the emergency response team. This is a standard feature for all alarms of this type. Smart home allows you to expand the functions of a standard GSM module.

You can also control all the functions of a smart home using your phone, via a GSM connection. Turn on the boiler, air conditioner, arm, turn off the socket groups, or control the gate. The MimiSmart GSM module is often used as a backup communication channel - an excellent solution for a smart home in case of interruptions in the Internet. Even in the absence of mobile Internet on the phone and in the house, you are sure that this or that function has worked.

You can also receive SMS notifications about emergency situations, water or gas leakage, boiler shutdown, disarming, motion detection on the site, etc.

There is also another feature related to security. In case of loss of a phone / tablet, or intentional theft to control your home, one call to the GSM module, you can untie the phone from home. To do this, you need to call the number from any phone and enter the secret code, thereby removing the unique key of the lost device. The perfect solution for a smart home. And in this case, you can be absolutely calm that no one will gain access to your smart home.

The KSITAL GSM system can be safely called a SMART HOUSE for the thrifty. Using the GSM channel, the system allows you to send messages and receive commands from the owner. Its capabilities allow the owner of a country house to simultaneously organize a large number of functions for safe and comfortable monitoring and control.

The Xital system has 3 controlled relays that allow you to control various engineering equipment in the on-off mode, pulsed at a specified interval, automatically at a given temperature. If the relays built into the system are not enough to fulfill your task, it is possible to expand these functions using extension blocks. The maximum number of controlled relays is 35 pieces. It is important to understand that magnetic starters or contactors must be used to control power equipment.

The Xital system kit includes a 220V adapter that feeds the system and a wire for connecting a 12V backup battery. In the event of a 220V power failure, the system automatically switches to power from a backup battery and reports the event to the owner. After the restoration of 220V, the system will report this and charge the battery.

The Xital system has 4/8/12 control zones to which you can connect sensors of various purposes, which close or open their output relay when triggered. By connecting a security sensor to the control zone - an IR sensor of motion, volume, door opening, glass breaking, etc., we get a security system that, when the sensor is triggered, sends an alarm message to the owner, rings and turns on the siren. The concept of GSM signaling has a wider meaning - Xital transmits a message not only about the intrusion, but also about the leakage of water, gas, smoke, etc.

Xital monitors the room temperature in real time for a user-defined interval, reporting it to the phone. This is extremely important for owners of heating systems - after all, when they are turned off, you can defrost the house. Also, for temperature monitoring in server rooms.

The vast majority of boilers have an input for a control relay thermostat. By connecting the output relay of the Xital system to this input, setting its operation according to the temperature sensor located in the desired room, we will get a remotely controlled thermostat. The owner sends the temperature to the system from his phone, changing it depending on the need to save coolant or a comfortable level of heat. After setting, maintaining the desired temperature is carried out automatically by the system.