How to wind a drip with your own hands: step by step instructions. Which coils convey the best flavor? Which kanthal for drip is better

A lot can depend on the design of an electronic cigarette, but the characteristics of the liquid, as well as the skills of the vaper, also affect the taste and amount of vapor. In particular, this is manifested in the correct winding of the drip - the spiral for the atomizer. This process is simple, especially since by winding the coil on the atomizer yourself, you can achieve amazing effects. The windings on the drip can be different and everyone can make their own individual atomizer, you just need to understand the main subtleties and nuances of the process.

Self-winding RDA - advantages and features

Not every vaper, especially for beginners, knows how to wind a RDA. Of course, now in specialized stores a huge assortment of goods is presented, which allows you simply not to think about self winding spirals, but this is what gives significant advantages over the purchased atomizer. Advantages of self-winding a spiral:

• the ability to create individual power resistance - to achieve the effect of strong or lightweight cigarettes;
• it becomes possible to regulate the temperature of the steam and the blow to the throat - depending on individual wishes and requirements;
• the ability to save money - spirals for self-winding are significantly cheaper than ready-made evaporators.

Thus, simple winding drips will help to create a vaporizer for individual requirements, it will also be possible to save money. You can really appreciate all the benefits from personal experience.

Types of windings and materials

Not every smoker knows how to wind a drip, and before you achieve good results, you will need to practice well, because not everything works out well the first time. A single-coil drip is the simplest and a beginner should start with it, although there are not many models on sale. This is due to the fact that such atomizers are not in great demand, vapers prefer winding in more coils.

It is also worth initially figuring out: what is needed for winding and what they generally exist. Coils are as follows:

A beginner can try two types of winding to start with - micro and space, the rest require good skills and practice. To perform the winding, you will need scissors, wire cutters, a winder, a screwdriver and tweezers. From the materials you need to take the wire, it can be from the following materials - stainless steel, nichrome, nickel, titanium, fechran.

A lot depends on the choice of wire - traction force, taste sensations, so this issue should also be approached thoroughly.

You will also need a simple unpeeled cotton wool. Many recommend using Japanese cotton for the wick. If funds allow, then yes, it will the best option but cotton is very expensive.

Instruction

Before starting the process, you need to wash your hands and get rid of all foreign odors that may be on the tools. This may further affect the quality of soaring. Prepare the vaporizer - remove everything unnecessary and clean it.

The wire must be degreased and burned - so it will acquire the desired plasticity. Using a special device - a “winder” or its substitute, we wind the wire according to the selected coil - link to link or at intervals. Winding must be done carefully so as not to make mistakes. When all the coils are done, press the wire and stretch it slightly with pliers, so the coil for the atomizer will become perfectly even. Before installing, it is necessary to check the correct heating - the spiral should not overheat. It is also worth taking care of the wick. Saturate a small piece of cotton wool with liquid, it should not be very wet and push it into the spiral, remove the remnants. Everything, now you need to correctly install the evaporator according to the instructions. When you need to rewind the drip, you can determine it yourself - by the same criteria as the factory atomizer.

Any vaper with experience in vaping begins to think about winding the coil in an electronic cigarette on his own. Despite the fact that you can easily buy a ready-made atomizer with a heating element installed, many vapers prefer to do it themselves, treating this activity as a hobby. In addition to being a hobby, this hobby has its advantages.

• Thanks to self-winding, you can achieve desired resistance indicators heating element, which are significantly different from the factory ones.
• By rewinding the coil, you can control the amount of steam, the temperature of the heater, and adjust the force of the “strike to the throat”, as well as better reveal the aroma of the e-liquid.
• When rewinding the heating element with your own hands saves a lot of money, since consumables for it are cheaper than a ready-made atomizer.

But, before you start mastering the rewinding technique, you need to have a suitable atomizer for this. Usually, bases that allow replacement of the heating element are abbreviated rta or rba. You can also add the rdta database to their number. The latter is a kind of drip that has a tank for liquid.

To prepare the atomizer for work, you must have with you such types of materials as cotton wool and wire for the coil. Cotton wool will serve as a wick, which is located inside the heating element. When the latter is heated, the liquid will evaporate from it.

Heating element materials

The following types of materials are used for self-winding the coil by vapers:

Wick materials

To make a wick, you will need the following materials:

The Importance of the Resistance Parameter

The resistance of the helix is ​​the main characteristic when winding, and its value may depend on the following factors.

• Thickness. The larger the diameter of the conductor, the lower its electrical resistance. But it is worth noting that increasing the thickness will require more power consumption, which will affect the battery charge. In addition, when increasing the thickness to reach a resistance of more than 0.4 ohms, it will be difficult to create turns.
• Length. The more turns in the heating element, the greater the resistance, since the “current” will need to travel a longer path.
• Material. Each material for winding the heating element has its own parameter electrical resistance. Therefore, depending on the metal used, the diameter and number of rings will differ.

It should be understood that the total heating area also depends on the number of rings and their diameter. It is not difficult to guess that the larger the area of ​​\u200b\u200bthe heating element, the more steam will be generated. But everything should be in moderation. If you wind the spring too large, then it will not fit in the evaporator, and the battery will not be enough to service it.

Therefore, self-wrap for vape should be carried out in accordance with Ohm's laws. If they are not taken into account, then if the mod with the electronic board is wound up incorrectly, it will refuse to work, and the mechanical mod will simply burn out. For example, if you have a heating element with a resistance of 0.5 ohms, then for its normal glow you will need a mod that can operate at 15 watts. But, since it is quite difficult to find a 15-watt vape that can function with low-resistance winding, you should pay attention to the fact that the vape is suitable in terms of power and resistance. For the most part, such devices have a power of 30 watts or more. Also, when choosing a battery, it is important that it is high current. This will help keep it from overheating during your experiments.

In order to achieve low resistance at low power, usually use titanium or nickel wraps, which work correctly only with thermal control. Without this feature, they quickly fail.

Since the process of calculating all indicators for a good cheat is quite complicated, you can use a service such as “ online calculator ” to calculate all the parameters of the future spiral. For example, in order for you to get correct winding you can use the calculator reprova or coiltoy.

Types of spiral windings

In practice, it is customary to distinguish between the following types of coil windings (coils).

Winding technique

The instructions below will not cover how to make art coils, since this complex process would require an entire article to describe. So, to wind a spiral using the micro- or spacecoil method, you will need the following tools:

The wrapping process for the two options differs insignificantly and is carried out as follows.

• Before starting work, be sure wash your hands and tools degrease them with alcohol. This is done so that the cotton wool does not absorb foreign odors, and sebum from the fingers does not get on it, which, when steamed, will spoil the taste. This also applies to tools, so that later you don’t inhale the steam with the aroma of the box in which they were stored.
• Next, you need to use a turbo lighter, gas burner or burner gas stove burn through the wire if it visibly springs. Baking will make it softer and more pliable. Not all materials for wrapping should be burned, but only those that are distinguished by their rigidity. Nickel and titanium wire cannot be burnt, as this method will significantly reduce their performance.
• Using a cotton pad and alcohol, wipe the titanium or nickel wire well. Wire from other materials does not need to be wiped, as they can be burned through.
• Take a drill of the required diameter or “winder” and start winding the wire on it “coil to coil” if it is a microcoil, and with a small distance (about 1 mm) if it is a speycoil. If the turns are uneven, do not worry - then everything is easily corrected.
  
  
• When you have wound a sufficient number of turns according to the calculations on the online calculator, the microcoil can be considered ready. In the case of the spacecoil, it is necessary to squeeze it a little around the “winder” with pliers and stretch it a little to align it. The heating element is now ready for installation.
• Next, the finished coil must install in evaporator. If you need to change the coil, then first remove the old one. To do this, on the base of the atomizer, use a screwdriver to unscrew the screws and remove the unnecessary coil, then push the edges of the wire that come out of the new spring under them. For convenience, the “winder” can not be pulled out.
  
  
• Tighten the bolts and, using the same “winder” or tweezers, align the spring so that it is exactly in the center, between 2 contacts. The following nuance should be taken into account: the lower it is to the central hole, the softer the soaring will be. And vice versa, the higher you place it, the more noticeable the “hit in the throat” will be. Avoid any contact of the wire with the elements of the base, except for the contacts provided for this.
• Take wire cutters and cut off the excess wire so that it does not touch the cover of the base when twisting. If this is not done, there will be short circuit.
• Followed by burn the coil by pressing the power button, while the power on the mod should be set in the range from 20 to 30 watts. Pressing the key should be short-term so that the spiral can evenly warm up (bake). The coil should turn red from the center to the edges. If any parts of the heating element do not heat up to red, it is necessary to draw along the spring with ceramic tweezers in the same way as it was previously done on the radiator with an iron key. After several such movements, the inter-turn short circuit will be eliminated (the minimum gap between the turns will appear), and the coil will begin to warm up evenly.
  
  
• Take a piece of cotton wool or a cotton pad and remove the top from it. You will need a more “fluffy” layer of it. Insert the cotton wick into the spring so that it can move freely from side to side.
  
  
• Now you can cut off the excess cotton, leaving a few millimeters around the edges (so that it does not touch the walls of the base). Screw on the base cap and check several times to make sure the wick does not get caught on the threads.

In this way, you can create a heating element for a clearomizer in an electronic cigarette with your own hands, and adjust the taste and amount of vapor by the number of turns of the spiral and the cross section of the wire. The most popular among vapers is the winding installed on the evaporator with a resistance of 0.3 Ohm. It is made of thin wire with a small number of turns. Which winding is better, only you can decide, since each person may have different requirements for the vaping process, and it is simply impossible to give a universal recommendation on this matter.

Modern serviceable atomizers use intricately woven wire coils. They are called coils. They differ from other spirals in a structure of several wires and a larger heating area, in addition, they evaporate the liquid more efficiently, forming an increased amount of vapor and a richer taste. Such devices look quite aesthetically pleasing. A correctly executed spiral shows the experience and ability of the vaper to work with windings.

Instruments

To make the most delicious winding, you need to know some rules:

• As a wick, you can wind cotton wool or special materials that are included with the electronic cigarette.
• The resistance of the wire material must be such that the power supply of the device can overcome it.

In order to put smooth and beautiful coils, it is recommended to have on hand:

1. 1. Jigercoil.
2. 2. Diagonal cutting pliers.
3. 3. Pliers.
4. 4. Tweezers.
5. 5. Drill or screwdriver.

Popular drips for bulk:

• Tsunami 24 RDA(Tsunami) from GeekVape is the best option for a beginner vaper. The biggest advantage of this drip is the wide (3 mm) holes for the coils.
• Mutation xV4(Mutation). The airflow at the RDA is lower-lateral, due to which an increased amount of steam is formed. It is possible to adjust the side or bottom airflow separately. The device supports the mode of both two spirals and one.
• Velocity. Velocity differs in that in it the liquid must be "supplyed" directly to the spiral. With this drip, you can get a rich taste and thick clouds of vapor.

Training

To create the coils in question, you need to know some of the nuances:

• The wire is coated with a special composition for protection during long storage. To get rid of it, you need to use a cloth soaked in alcohol, or special alcohol wipes.
• You need to install the workpiece exactly in the center in the screwdriver chuck. Do not allow deviations of the wire from the center. If the workpiece consists of a single strand, it is best to make a bend on the wire and pass it between the clamps of the cartridge on the side. In this case, the wire will hold better and not scroll. When creating some windings on the bend, you can fix the core of the braid.
• The wire from the package is always uneven, so it needs to be straightened. To do this, one end is attached to a screwdriver, the other is pulled out with pliers. It is necessary to make several turns in each direction.

Twisted

This is the simplest spiral of complex winding options. It is called a "pigtail", as it consists of several intertwined strands of the same diameter. A simple option is with two cores, other types differ only in the number of wires. In this way, you can make a winding for both simple clearomizers and serious drips. The power at which the spiral is used will depend on the number and diameter of the cores.

You can assemble a Twisted-winding drip from kanthal, stainless steel or nichrome.

Procedure:

1. 1. First you need to fix the workpiece. They take a core twice as long as the planned blank, and fold it in half. One end is fixed in a screwdriver, and the second (loop) is intercepted with pliers so that it does not spin. After pulling the loop, fold the wire in half to make the winding neater. If more than two strands are used, they will need to be straightened separately from each other.
2. 2. Rewind the wire into a pigtail. Pull the workpiece with pliers and turn on the screwdriver. The denser the cores, the shorter the length of the workpiece, so you need to take the wire with a margin.
3. 3. Cut off the workpiece. Make a few turns to loosen the wire tension and not injure your hands when cutting. With wire cutters, cut off the part that remains in the cartridge, as well as the one that formed the loop.
4. 4. Wind the spiral.

Winding Clapton

Clapton is the basic version of complex winding. The workpiece is made from a core of a larger diameter and wrapped with a smaller wire.

For Clapton, kanthal or stainless steel is used as the main core, and the winding is made of nichrome.

Instruction:

1. 1. Straighten the wire.
2. 2. Wind the braid for the warp. Without removing the wire from the tool, they begin to make turns from the edge that is closer to the screwdriver. One end must be fixed on the bend of the main core. First you need to “bait” the workpiece by hand, then turn on the tool and hold the wire. The coils should lie row by row, but at the same time not wind on each other. If gaps appear between the turns, they must be removed by moving the turns to the beginning of the workpiece.
3. 3. Cut off the workpiece. Take wire cutters and cut off the ends of the wire. You can also fold the unbraided part of the base so that it does not unravel.
4. 4. Wind the spiral.

Tiger

Tiger - winding, which consists of a main core and a metal tape. Gaps are left between the turns, which look like tiger stripes, for which the winding got its name.

To create, kanthal (for the core) and nichrome (for the tape) are used.

Step-by-step instruction:

1. 1. Straighten the wire.
2. 2. Rewind it with tape. The straightened kanthal is taken out of the screwdriver and a piece of flat nichrome is taken, equal in length to the base. The tape is wound by hand on the base, leaving gaps between the turns. After several turns, it is necessary to install the workpiece in the tool, pull the tape and the main core parallel to each other and take both ends with pliers. After that, the screwdriver is turned on until the tape stops protruding against the background of the base.
3. 3. Cut off the workpiece. Take wire cutters and cut off parts not covered by rewind. It is necessary to hold the ends of the wire, because due to tension they can spring back and hit your hands.
4. 4. Wind the spiral.

Creating windings requires certain skills and experience. Over time, you can learn how to create more complex types of coils, since the instructions given are only a sample - vapers can invent unique combinations of coils, everything is limited only by the author's imagination and the size of the atomizer.

If your box mod has a high power (100 or more watts), then just focus on the resistance from 0.2 ohm to 0.5 ohm. Of course, for the high-quality operation of an electronic cigarette, a power source is required that can provide the proper amount of power, which is enough to work with the resistance of the manufactured coil. So you need to know specifications power supply for your vape device.

You will need tools such as:

• scissors
• cotton wool
• screwdriver or wrench to the uprights
• wire of a suitable material and the desired cross-sectional diameter

The maintenance process of almost any evaporative system should be divided into several stages, each of which will require certain manipulations to install and correct the heating element and wick. Professionals have different approaches to winding, but we will consider a universal way to produce quality work. Do not forget, for a positive result, you need to have a skill, and if it didn’t work out the first time, then don’t despair and try again.

Stage 1

Wind the wire around the coil jig so that you get five to seven turns, depending on the desired resistance. The wire should be wound on the diameter of the coil jig, which corresponds to the dimensions of the evaporation chamber. Instead of a jig, you can take any screwdriver that is suitable in diameter. The more turns, the higher the resistance, and vice versa, the fewer turns, the lower the resistance. The number of turns affects not only the resistance, but also the extent of heating the wick. The more turns, the more extensive the heating will be and the more steam will be produced.

Once you have made the optimal number of turns, bite off the tail of the wire so that the workpiece is as in the picture.

The final resistance is affected by the type of material, wire thickness, coil diameter and number of turns. A coil calculator will help you calculate the result, which is easy to find on the Internet.

Stage 2

Thread the coil into the racks of the evaporative system. The racks of different e-cigarette tanks have different designs: some are screw-type, while others have a clamping system with hex screws. But we will consider velocity racks that are on this moment are the most common.

You need to re-insert the coil into the coil jig to the desired diameter so that it locks and then carefully insert the coil into the racks, and then clamp it in the optimal position with the screws. Then, using a coil jig, correct the position of the spiral relative to the boundaries of the evaporation chamber. To install two coils, you will need to perform a similar operation on both sides, carefully tightening the screws and holding the coils symmetrically relative to each other.

Important! When installing two spirals, the resistance decreases exactly two times. If one ready-made coil has a resistance of 0.5 ohms, two of these will give 0.25 ohms.

Stage 3

When the coils are installed, they need to be burned. If you use kanthal wire, you can safely burn the spiral red-hot, pressing the heaters with ceramic tongs so that the turns are pressed tightly against each other. Burning Kanthal should be carried out at a voltage of 3 to 3.5 volts.

After burning, the total winding resistance may change slightly, usually in the range of plus or minus 0.3 ohms.

Be careful, when using a steel coil, burn it at a low voltage (2.8 - 3.2 volts). It is not recommended to burn nickel and titanium, these materials work correctly only in temperature control mode and when burned, these metals will simply deteriorate and become unusable.

And so, only kanthal and steel spirals should be burned. Nickel (Ni) and titanium (Ti) do not need to be burned, it is enough to make a neat spiral with a small distance between the turns. But Ni and Ti are less and less in demand, as steel coils are much more versatile and can work not only in temperature control mode, but also in variable wattage mode.

Stage 4

The next step to winding the atomizer will be cutting and installing cotton wool as a wick. You will need a piece of natural specialized cotton, often such cotton is called "Japanese cotton wool". It differs from any other cotton wool in the longitudinal arrangement of fibers and natural organic composition. There are many variations of materials offered by manufacturers as a wick and have their own advantages. But we will focus on Japanese cotton wool, as it is the most common.

A piece of fleece must be cut along the fibers and as a result, a strip is obtained that densely fills the space inside the spiral. And before you insert the wick, you need to twist its end with your fingers so that it goes into a spiral, as shown in the picture. Then trim the ends of the wick so that it is long enough to fill the grooves, but no more. Laying cotton wool is a very delicate matter, where it is required to determine the optimal amount of cotton wool by eye. If everything is done correctly, the spiral will not burn out the wick, and the cotton will be enough to fully absorb the liquid. Otherwise, the liquid will seep and leaks will begin. It should be precisely determined how much material will need to be installed for correct operation. And this can only be understood by practicing winding regularly.

Stage 5

After installing the wick, you need to moisten it with liquid for electronic cigarettes, otherwise, at the first puff, the cotton will partially burn, which will negatively affect the taste transfer. Once the heater and wick are in place, it's time to assemble the tank and fill it up. It remains only to make the final test.

Stage 6

Once you have assembled the atomizer, the operation of your winding should be tested for leaks or bitterness. How to do a test? Easily! If you are using a kanthal coil, then set the power to 3 volts for low heat testing. And then with each new puff, the power should be increased to 3.8 - 3.9 Volts. By increasing the current, you will be convinced that there is no aftertaste of burning from winding. If leaks are found, then an insufficient amount of wool was laid, or the laying was done incorrectly. And bitterness when puffed is the first sign of an excessive amount of wick! Depending on the result, adjust the volume of the wick by replacing the fleece. In this way, you will find the best way to maintain your electronic cigarette.

• When buying a serviceable evaporative system, make sure you also purchase quality tools to install the heating element.
• Use only wires intended for electronic cigarettes: kanthal, steel, titanium, nickel.
• Do not burn nickel and titanium, these metals should be cleaned with alcohol before making the coil, then thread the wick into the coil.
• Change the coil and cotton regularly if you feel a decrease in performance and a burnt taste.
• Use only special cotton for vaping as a wick, we do not recommend using medical and synthetic cotton.

Good morning 🐝 woopers💨❗ today is Saturday, I offer a little sort out suitable windings. What are the most tasty and bulky, as well as how not to undermine your fart on them💥💥💥.

So the top 👍🏻 builds from Vkusipar:

🔥Green Mamba . A good thing, winding is very difficult. Suitable for bellows and boards of high power, requires very good airflow, draws liquid well, gives great taste and excellent heaps☠. Fits nicely into RDAs, and also requires large holes in the racks. Approximate operating power of two coils: 70-120 watt.

☢Half Staggered . A more delicate build, it is difficult to wind, it brings down well, more than taste🍭. You also need good ventilation. Liquid draws a little worse than Green Mamba, but quite enough. Approximate operating power of two coils: 40-80 watt.

🚀Fused clapton . Hit of all time. It's realistic to make. Slightly worse in taste than Half Staggered but tastier than usual Clapton. In the center it is better to use 0.4 or 0.5 kanthal, and as a braid 0.1 nichrome. Pulls liquid and piles almost like Hald Staggered. It is possible to put 0.5 kanthals between the turns of Fused, it will be better to pile on, the main thing is good airflow🌪. Approximate operating power of two coils with 2 * 0.4 core and 0.1 braid: 40-70 watts.

⚡☠☢WARNING☢☠⚡

Before vaping builds with a resistance below 0.17 ohm, make sure that your batteries are working (and are married if there are 2 or more of them in the box mod), withstand the current load, the fur is clean, the box with the board is working properly, and all the goats 🐐 on coils killed!

Thank you for your attention, your Vape shop Taste Steam ✌🏻.