home materials

How to get rid of bad smell from the sink. How to eliminate the smell from the sink in the kitchen: effective methods and recommendations. Why does the sink smell

Causes of smell

To begin with, I propose to figure out why it stinks from the sink in the kitchen. Over time, dirt and grease accumulate in the pipes passing under the sink. They rot, from which an unpleasant odor appears.

Siphon- the main part of the kitchen sewer. It happens:

flask (bottle);
corrugated;
knee.

Each siphon is equipped with a water seal or so-called "water lock". Its principle of operation is quite simple: it should always have water in it. This liquid keeps the smell from the kitchen sink from spreading.

If water stops accumulating in the siphon, there is an unpleasant smell from the sink in the kitchen. There may be some problem with the operation of this device. Here are the main ones:

Stretched corrugated tube. The sagging corrugation does not cope with its task and must be firmly fixed.
Wrong installation siphon. The plastic pipe should sink a few cm into the water if it is installed incorrectly - a bad smell from the pipes is guaranteed.

Frequency of use. If the sink is not used for a long time, then all the liquid will evaporate in the siphon. Because of this, stench will appear.

If, after a long absence, you notice that the smell of sewage in the kitchen, try draining the water. The smell should disappear soon.

Self repair. With self-assembly and repair of the siphon, the water seal may be incorrectly formed. The water will either immediately drain or rise back into the sink.

Unfortunately, not all problems can be associated with the installation and operation of the siphon.

What else contributes to the appearance of an unpleasant odor:

Poor sealing. If the drain and sewer are not airtight, they must be urgently treated with a sealant at the joint.
clogged riser. If the sewer pipes are clogged with waste, then the appearance of stench cannot be avoided.

Do not throw large food residues and other household waste into the sink.

Mechanical damage on the walls of the pipes. Cracks and chips will let water through to the floor and walls. Mold will start to grow on them and cause an unpleasant odor.

Getting rid of bad smell from the sink

We found out why the sink in the kitchen smells. Now I will tell you what to do to correct the situation that has arisen without the involvement of third-party help. We will need:

plunger;
plumbing cable;
garden hose;
soda + vinegar;
salt;
store-bought pipe cleaner.

3 mechanical ways

If you notice that the water in the sink does not drain, then most likely a waste cork has formed inside. The easiest way to fix it yourself with a plunger. For this:

place the plunger bowl over the drain hole;
start moving the handle up and down so that the base of the plunger does not come off the sink itself.

When the blockage is in a hard-to-reach place, a plumbing cable can be used. This is a long spring that follows the curves sewer pipes. One end of the cable must be sent to the drain and try to push it as deep as possible.

The first time you may not be able to push the cable deep. Try reciprocating movements to take it out and lower it back into the drain hole.

You can increase the effectiveness of the cable cleaning method if you additionally run water from the tap.

Another way to eliminate odor from the sink is to use a flexible garden hose. This method is very similar to the previous one. However, finding a regular hose at home is much easier than a plumbing cable.

Washing dirty dishes with particles of grease and stuck food leaves its mark on the walls of the drain system. A large accumulation of these particles leads to decay and the appearance of an unpleasant odor. Equally important in this matter is the state of the drain and siphon, whose failure to work also makes itself felt.

Sources of smell

Determining the source of your troubles is simple, just look at all the possible objects that can cause an unpleasant smell in the kitchen. First of all, pay special attention to the siphon, drain pipe and sewer. These three plumbing parts are the most vulnerable to clogging and dirt buildup. Also inspect the space between the sink and the wall, the hose may have come off, water is leaking, or an old dirty washcloth or floor rag is stuck.

If the water does not pass well and, as a result, an odor appears, the sewer system should be inspected. Perhaps a large object got into the drain, which created a cork or a blockage formed. It is the latter option that is one of the most common causes of that very darling from the sink. The greatest blockage is concentrated in the siphon. It is here that when washing dirty dishes, a huge amount of fat, debris, dirt, hair particles, adherent food residues and burning accumulate. Of course, special grates for the sink opening help to minimize the entry of waste into the drain system. However, over time, even such careful care gives cracks. A precipitate forms on the walls of the siphon, which begins to rot and smell.

Help solve this problem by cleaning the siphon. The mechanism of action is as follows. Substitute a bucket under the base of the lower part of the siphon, carefully unscrew the lid and remove all accumulated dirt, fix the lid in its place. After that, we wash the drain with boiling water with the addition of a small amount detergent. If the siphon has a corrugated tube, then it must also be disconnected and thoroughly cleaned. But in houses with an old drain system, disconnecting the siphon is quite problematic, especially with a cast-iron elbow.

If the water does not pass well and, as a result, an odor appears, the sewer system should be inspected.

The main purpose of the siphon is to create a water seal, that is, a special barrier that blocks evaporation and the penetration of foreign odors into the apartment from the sink hole. If there is no water seal in the siphon, then the appearance of foreign odors is inevitable.

Most often, the problem lies in the improper installation of the drain system itself with a siphon. Depending on the type of construction, this problem can be solved in the following ways. If there is a bottle-type siphon, fix the location of the drain pipe correctly so that it is about 2-3 cm below the water level.

With a corrugated drain, it is important that the tube remains slightly bent and does not straighten out. Check the correctness of its installation and, if necessary, give the desired shape. This will help create a water seal, and so that the tube does not return to its previous position again, fix it with special clips.

If there is no water seal in the siphon, then the appearance of foreign odors is inevitable

Other reasons for the violation of the water seal may be a vacuum breakdown. characteristic feature this violation is the gurgling of water in a clogged drain hole. There are two ways to solve this problem. The first of these is cleaning the fan pipe, for which it is best to seek help from a specialist. The second is the installation of a vacuum valve that normalizes the pressure in the sewer.

Other causes of smell from the sink

In addition to the main causes of the smell from the drain hole, there are secondary ones that also provoke this problem.

If an unpleasant odor is concentrated under the sink, then perhaps the reason lies in the violation of the tightness of the structure and the appearance of cracks. To find the very source, you need to smoothly open the water and look at the condition of the pipes and joints. If water leaks at the junction of pipes, then secure fixation with silicone sealant or replacement of the sealant will help fix the problem. If cracks are found, immediately replace the old pipe with a new one. If a leak occurs, the odor may be absorbed into the flooring. Therefore, after replacing pipes and linings, wash the floor thoroughly with a refreshing cleaning agent.

The reason for the smell may lie in the violation of the tightness of the structure.

Prolonged lack of use

If you haven’t used the sink for a long time, then the water in the drain system can stagnate and the walls dry out, which also provokes an unpleasant odor. Therefore, before a long business trip or trip, add a couple of spoons to the drain hole vegetable oil. This will create a reliable enveloping film, prevent the evaporation of moisture and the spread of odor at the same time.

Drain System Cleaning Methods

To clean the sewer and all parts of the drain system from clogging, as well as to eliminate foreign smell from the sink, chemical and mechanical means are used. IN Lately no less popular is the hydrodynamic installation, which flushes the sewer system under high water pressure.

Soda is based on sodium carbonate, however, as in many chemical cleaning products. Therefore, this substance can be attributed to folk remedies to combat odor, blockage in the sink and similar chemical effects. This remedy can be combined or used separately.

For the first option, we will prepare a solution. Dilute three tablespoons of baking soda or soda ash in warm water and pour the mixture down the drain, leaving it for 20-30 minutes. After some time, we wash the drain with warm water, and even better, scald it with boiling water.

Vinegar
Soda

This method works well for minor blockages. If the problem is more pronounced, then you can combine the use of soda with table vinegar. To do this, pour about half a pack of soda into the drain hole and fill it with a glass of vinegar. The mixture will begin to sizzle and foam, this is a normal chemical process. We also leave this mixture to interact with the walls of the drain system, after which we scald everything with boiling water and rinse thoroughly. To combine the useful with the pleasant, use lemon juice instead of vinegar. This will allow you not only to cope with the problem that has arisen, but also to fill the kitchen with a citrus aroma.

For better results and higher pH levels, like chemicals cleaning, experts recommend calcining soda in a dry frying pan, and after cooling, dilute it with water and pour it into the drain hole.

Attention, do not pour water into a pan with hot soda, otherwise you can get a chemical burn.

In the event of a serious blockage and an unbearably terrible smell, use chemical sewer pipe cleaners. They contain sodium, which softens the formed plaque on the walls. However, when using these products, be extremely careful, following the instructions clearly so that caustic chemical components do not corrode the walls of plastic pipes. So before using the product, familiarize yourself with the proportions and rules for use.

Such drugs are sold in a wide variety of variations, in the form of powders, granules, gels and liquids. Powdered preparations work slowly, so consumers prefer liquid components. They have relatively the same cost, so it is important to rely on the gentle effect of a product that does not destroy the polymer base of the drain system. We can recommend Tiret, Mister Muscle and the well-known Mole.

Observe safety precautions

When working with any sewer cleaner, do not forget about safety rules.

Put on rubber gloves on your hands, as well as a respirator, so as not to provoke a burn of the skin and inflammation of the mucous membrane. Pour the liquid into the drain hole of the sink slowly, without splashing. Leave the solution to interact with deposits on the walls of the sewer for the time specified in the instructions. After that, flush the drain system with plenty of water and scald it with boiling water. Such an event will help you get rid of the blockage and completely eliminate odors from the sink that bother you.

Unfortunately, not all types of blockages and smell can be eliminated with the help of folk and chemical means. Sometimes the seals and plugs in the drain pipes of the sink are so serious that only special mechanical devices can handle them. Among them, a plumbing cable, metal tape, spiral loops, etc. are used. Outwardly, all these devices differ from each other, but in practice they have one mechanism of action - the elimination of blockage and the removal of residual solid particles into the central sewer or septic tank.

If you don't have one in your house specialized funds, you can use steel wire. The main thing is that it is flexible and easily penetrates into all hard-to-reach places. When removing hair and pieces of fabric, use the hook attachment.

Plumbing cable
steel wire

However, the plumbing cable will still be the best fixture, thanks to its convenient design. The spiral has good flexibility and penetrates into all parts of the drain system, and the handle allows for rotational movements without slipping on the hand. In addition, you can always choose a model that is convenient for you, based on the characteristics and diameter of the pipes.

Before you start cleaning, be sure to prepare buckets and rags, and put on old clothes. Trust me, this will help you. After the end of the procedure, and a washstand, using for this.

Hydrodynamic installation - a new solution to the problem

An unusual way to deal with blockage is to remove the plug with a strong pressure of water, which pushes all clogged particles out. For these purposes, a special compressor is used, powered by mains or gasoline. It provides a large flow of water into the hose under pressure. This method helps to cope even with extra complex blockages themselves.

When carrying out this procedure yourself, consider a few important rules:

pressure and pressure of water supply;
the amount of solid particles and the magnitude of blockage;
the material from which the sewer system is made.

Be especially careful when using this setting with plastic pipes. If the plastic is of poor quality and is made of cheap polymer materials, then under high pressure water and mechanical impact, its fragile walls may not withstand the pressure and collapse.

The main purpose of the kitchen is cooking. Therefore, it is important to keep this room clean, to observe household hygiene. The appearance of unwanted aromas adversely affects the well-being of family members. The only way out is to eliminate the smell from the sink in the kitchen. Then and good mood will appear and the quality of the food will improve.

Water does not pass - blockage in the siphon

When housewives wash dishes, quite often microscopic pieces of food, tea brewing, settle in the sink, which then fall into the pipe.

Sometimes they linger in the siphon. This device connects the sewer system and the sink. At the same time, it is a kind of barrier that blocks the entry of unwanted odors into the room, preventing clogging of the pipeline.

If you do not take timely measures to prevent pollution, then the waste gradually accumulates and rots. That's when the terrible smell comes from the sink in the kitchen. There are also ways to deal with it.

Use a plunger. This is a simple device that anyone can use. The water should completely cover the bowl nozzle. With vigorous up and down movements, try to pull out the stuck debris. With slight contamination, the liquid will quickly go down the drain.
Clean your device. It is best if a bottle-type siphon is installed in the kitchen. It has a rigid construction and unscrews from below. There must always be water inside its body. This so-called water seal blocks bad smells from the pipe. Disconnect the siphon from the system and remove all dirt from it. When connecting, maintain the correct slope, follow the diameter of the pipes.

Chemistry and home products - to help plumbing

Apply cleaning products. If the blockage has been formed for a long time and is firmly held, then there are commercially available substances that dissolve food residues, wool, etc. The instructions for the drug clearly describe what to do and for what period of time to pour or pour. Depends on the type and consistency of the chemical composition (gel, powder, liquid). In any form, such products can remove the smell. After the procedure, it is recommended to spill a large amount of liquid, preferably hot.

Getting rid of minor fat deposits is much easier than "fighting" with a compressed cork. Almost always have salt and baking soda on hand. You should make a saturated saline or soda solution and pour one of them into the drain hole. Do not use the sink for half an hour.

For more complex blockages, you need to act with citric acid. It can be filled up or, combined with water, poured into the hole.

It is even more effective to mix soda with vinegar essence. Such a mixture can not only cope with unwanted odors, but also eliminate the smell. Then you need to tightly cover the drain to protect yourself from harmful fumes. And the final touch - skip hot water. She will take away everything else.

Plumbing cable - a simple and effective tool

There are situations when a plug forms somewhere in the pipe. Then you can not do without a plumbing cable. It calmly passes through all the bends of the sewer system. It has a comfortable handle that makes it easy to rotate. A small brush or hook located at the end of the cable collects all the dirt. When the end of the tool reaches the blockage, then you need to try to push it forward. Then the cable is put in order: washed, wiped, put away for storage.

If, after the measures taken, it still smells like sewage, then you need to examine how the drain system works. Perhaps cracks appeared on the pipe or the joints were depressurized. The second reason can be eliminated on your own by applying sealant to the affected areas. The replacement of pipes is carried out by specialized organizations, having previously carried out a diagnosis.

On a note. So that staying in the kitchen does not become uncomfortable, it is advisable to have a pipe cleaner, a plunger, and a plumbing cable available.

Do not forget that a manual plunger creates a vacuum that is not able to spread its action beyond the siphon.

Preventive measures really work

In order to prevent an unpleasant odor, simple rules must be followed in the kitchen.

Purchase an additional mesh for the drain hole.
Clean dishes from food residues, crumbs before putting them in the sink.
Use home remedies (salt, vinegar, etc.) to prevent blockages 1-2 times a week.
Make it a preventative procedure to clean drain pipes with chemicals 3-4 times a year.
Get a mask or respirator, gloves, apron. These items will protect against exposure to harmful fumes.
Make sure there are no leaks under the sink. If any are found, then in most cases the problem is with the seals. Then it will immediately become clear why it stinks. The scent comes from the sewer. Then the rubber gaskets should be replaced.
Clean the siphon periodically.

The presence of unpleasant odors in the kitchen from the sink causes a lot of inconvenience. Therefore, it is important to get rid of them as soon as possible. If all methods and methods have been tried, and the sharp smell does not go away, then it remains only to rely on a qualified plumber.

Even the most clean and tidy hostess is not immune from the appearance of an unpleasant smell from the sink. There may be several reasons for this trouble, respectively, there are also different ways to remove an unpleasant odor.

Below we will consider in detail how to get rid of this problem in each individual case.

Causes of odor

To decide what to do about the smell from the sink in the kitchen, you first need to determine the cause of its occurrence.

To do this, you need to examine the following elements of a plumbing fixture:

Siphon;
The space between the sink and the wall.

In some cases, the source of an unpleasant odor is a wet washcloth that has fallen between the wall and the sink, or a floor rag left under the sink. If you are convinced that the cause of this trouble is evaporation from the drain hole, you can begin to eliminate it.

Siphon problems

blockage

In most cases, the kitchen sink smells as a result of the accumulation of debris in the siphon. The fact is that during the operation of this plumbing fixture, fat, hair, particles of human skin, food debris, etc. settle on the walls of the siphon and drain pipe. All this sediment begins to rot over time.

This problem can only be solved by disassembling and cleaning the siphon.

If the design is bottle type, this operation is performed as follows:

First of all, you need to unscrew the bottom cover of the siphon and pull out all the accumulated debris with your own hands.
After that, the cover must be replaced.
Then the drain system must be washed with boiling water or hot water pouring several pots of boiling water into the sink. You can add a small amount of dish detergent to the water.

If a flexible pipe is used as a siphon corrugated pipe, then it must be disconnected from the sewer and sink, and then washed well.

Sometimes it is very difficult to dismantle the siphon, for example, if an old cast-iron elbow is installed under the sink. In this case, the use of chemicals for will help solve the problem.

These drugs include:

Tiret;
Mole;
Mr Muscle, etc.

Note! The sewer cleaner must be suitable for the type of pipes for which it will be used. Otherwise, the system may be damaged.

The price of these drugs is about the same, as well as the effectiveness, so you can use any of them. To do this, the agent must be poured into the siphon through the drain hole and leave the sink in this form for several hours. After that, the drain must be washed with boiling water, as in the previous case.

Lack of water seal

The main purpose of siphons is to provide a water seal. The water lock prevents the penetration of fumes from the sewer into the apartment through the drain hole of plumbing fixtures. Therefore, it is quite possible that in the kitchen from the sink it smells of sewage due to the lack of this very water seal.

Most often, the absence of a water seal is associated with improper installation of the siphon. Depending on the type of its design, the problem is solved in different ways:

Often there is no water seal due to its vacuum breakdown. In this case, gurgling is periodically heard from the plumbing fixture.

There are two ways to fix this malfunction of the sewer system:

Clean the vent pipe that provides ventilation to the sewer system. IN high-rise buildings this operation should be carried out by specialists. In your home, you can clean the ventilation yourself.
If cleaning the ventilation did not correct the situation, or there is no fan pipe at all, then a vacuum valve must be installed near the plumbing fixture, which normalizes the pressure in sewer system and thereby prevent the breakdown of the water lock.

Depressurization of the drain system

If there is an unpleasant smell under the sink in the kitchen, then the problem lies in the depressurization of the pipe joints or the appearance of a crack in them. To find a problematic place, you need to open the water and carefully examine all pipes and joints.

If a gap appears at the junction of the pipes, then the leak can be eliminated by replacing the seal or using silicone sealant. If a crack appears in a pipe, then it must be replaced.

Advice! Before removing the malfunction, you need to make sure that the leak is present in only one place. It is possible that there are several problem areas.

It must be said that in the event of a drain leak, wastewater can soak into the flooring, as a result of which the smell remains even after the problem is fixed. Therefore, in order to completely get rid of it, it may be necessary to replace the flooring.

Here, perhaps, is the entire instruction for ridding the sink of an unpleasant odor.

Output

The appearance of an unpleasant smell in plumbing fixtures, including the kitchen sink, is a fairly common problem. However, as we found out, there are not so many reasons for this phenomenon, and in most cases, every home craftsman can eliminate them.

For more information on this topic, see the video in this article.

First, identify the causes of the problem:

Siphon blockage. The curved part of the pipe often ceases to function due to elementary clogging with food residues, hairs, and greasy deposits. Particles settle in the siphon itself, on the surfaces of the pipes from the inside, forming a layer of deposits impenetrable to water. As they decompose, they give off a heavy, rotting odor that spreads from the siphon through the sink into the kitchen.
Incorrect siphon installation. There is nothing complicated about connecting plumbing fixtures, but often the cause of bad indoor air is errors in pipe connections.
The siphon does not cope with the functions, the tightness is broken, air and unpleasant odors penetrate into the kitchen.
Air entering the sewers. The appearance of an air lock in the pipes will be “reported” by gurgling sounds, as well as a slow drain of water.
Sagging corrugation. even right installed pipes stretch during use. Various problems arise: drains accumulate in the sagging area, a water seal does not form.
Defects in pipes, corrugations, siphons. They arise due to mechanical influences on the system, as well as due to the loss of elasticity by the corrugation.
Problems with sealing the corrugations and the riser. All connections must be joined using sealing rubber rings, adapters, adjusted in diameter. In case of violation of the installation, the smell will penetrate from the pipes into the premises.

The problem of smell often arises if the faucets and sinks have not been used for a long time. There are no blockages in the siphon, but there is also no necessary protection from air and water odors. There must be water inside the device that creates a water seal. In the absence of water, there are sharp smells of sewage, rotting deposits.

How dangerous is the smell

Disgustingly smelling air is a big nuisance for households. In addition to discomfort, it is dangerous due to toxicity. Heavy fragrance ingredients:

hydrogen sulfide;
ammonia;
methane.

The first two substances smell sharply and unpleasantly, methane practically does not smell. The presence of these elements in the air negatively affects the state of the respiratory system, affects nervous system.

A person constantly feels discomfort, a feeling of anxiety, fear. Methane causes nervous breakdowns, sometimes fainting.

How to remove the smell from the sink folk remedies

The problem should be resolved immediately. Improvised simple means will help. Their main advantage is safety and the absence of toxins.

Lemon acid

An assistant in many matters in the kitchen is citric acid. To flush the pipe, you will need 2-3 liters of boiling water and a pack of funds.

The powder from the pack is carefully poured into the drain hole of the sink.
Pour boiling water inside slowly.
After a while, the pipe is shed with clean water.

Soda

Perfectly helps with blockages in the pipe ordinary baking soda. Procedure:

Pour soda down the drain.
Wait about 20-30 minutes.
Pour in hot water.
Then the manipulations are repeated again.

If washing twice with soda does not help, choose a more effective option - soda and salt.

soda and salt

To begin with, a combined composition is prepared by mixing soda and salt in equal proportions. All other steps are the same:

Pour the mixture down the drain.
Wait half an hour.
Pour boiling water, waiting for the result.

soda and vinegar

An "explosive" mixture for flushing pipes under the sink is prepared using soda and ordinary table vinegar.

Pour a little soda into the siphon through the drain (2-3 tablespoons).
Next, a glass of bite is poured after.
Close the drain with a stopper.
Withstand 10-15 minutes for the passage of the reaction.
Rinse the sink with hot water.

mustard powder

A similar method with mustard powder.

Pour 2-3 tablespoons of the product into the drain.
Wait 20-30 minutes.
Spill the pipe with boiling water.

Fixing the problem with a plunger

An indispensable thing in the household is a simple plumbing fixture plunger. It is advisable to have several plungers: for the toilet, sink, bathroom. The rubber cap of the device is applied to the drain of the sink, pressed with a handle. Turn on the water and then press the cap vigorously several times. Suction up and down streams of water pump the pipe, removing possible blockages.

It is convenient to use a plunger if there is no desire to disassemble the corrugations. Even women can easily cope with such a device. If the plunger does not help, special cables are used.

Rope use

Plumbing stores offer a wide range of different cables for cleaning pipes. Their length varies from 3-5 meters and more, while the cables are equipped with special handles for rotation, brushes or a spiral hook.

For the cleaning:

Remove the siphon corrugation.
Carefully insert the cable into the pipe.
They begin to push the device into the riser by turning the handle. The cable is screwed into the pipe, passing along its entire length.
Having screwed up to a blockage, they begin to move the cable in different directions. As an option - pushing the deposits further, hooking them.
Repeat the manipulation 2-3 times until the pipe is completely clean.
Connect the corrugation, turn on the water and rinse the pipe.

The cable after use is washed from deposits and dirt, lubricated with oil. Stacked in a bay and stored in a dry place.

Siphon disassembly

The analysis of the plumbing unit will help remove dirt and grease from the siphon. Corrugated tubes are considered self-flushing, siphons with a flask need regular cleaning.

A basin or bucket is placed under the sink and siphon.
Carefully unscrew the flask from the pipe, clean, rinse. To remove greasy deposits inside, dishwashing gel is added to the water.
Connect the flask back without losing the spacer rings in the connections.
Pass water through the sink faucet, flushing the pipes.

Elimination of depressurization of joints

In case of violations of the sealing of the system, it will be necessary to use a fum-tape or special plumbing compounds. Types of sealants:

Compositions based on polyurethane. Differ in a sharp specific smell. It is required to use personal protective equipment when working.
Acrylic. Durable sealants resistant to temperature extremes. "Cons": low elasticity, which leads to depressurization of the seams. Compositions of low and high moisture resistance are produced.
Silicone sealants. They do not shrink, are convenient and practical to use on all types of surfaces. The "minus" of silicone compounds is the high cost.
Combined sealants (silicone and acrylic). Plumbers use such compounds for sealing joints, as well as for gluing various materials.

Popular brands:

CeresitCS7 (gives elastic seams);
Tytan Power Flex;
CIKIFIX (high adhesion to various surfaces);
Moment Germent (suitable for wide seams);
S 4000 (sealant with high mold resistance).

When working, the surfaces are first degreased (with alcohol, acetone). Next, the composition is applied with a spatula, leveled, excluding gaps.

Use of chemicals

Apply chemical compositions to eliminate the smell and clean the pipe, be careful.

before buying and using, carefully read the instructions;
take into account the specifics of the composition (alkaline remove fatty deposits, acids act on blockages from hair, thread, soap).

They produce funds in the form of gels, powder, liquid. Each case has its own application.

On a note!

Gels are considered the most economical. A small amount of the drug is enough to eliminate pollution and solve the problem of a clean pipe.

In the list of the most popular drugs:

Mole;
Domestos;
Mister Muscle;
Tiret Turbo.

Mole is an effective drug - a liquid or powder that is affordable and perfectly copes with all blockages in the system. Disadvantages: pungent smell, suitable for working with metal pipes.

Quickly removes blockages and removes rotting odors from the sink Tiret Turbo. In the series, compositions of various concentrations are produced:

for complex blockages (red bottle);
antibacterial (blue bottle);
for prevention (green bottle).

Sanoks gel is popular. Clean drain, safe for pipes made of any material. With blockage, it helps weakly, but is indispensable for preventive flushing of water supply and sewage systems.

Chirton, Bagi Potkhan, Selena granules do a good job with organic traffic jams. The first two drugs are based on caustic soda, which begins to work quickly when interacting with water. The disadvantage of the compositions: high cost.

From budget options popular granular drug Selenium, giving quick effect and does not have a strong odor when applied.

Prevention of unpleasant odors from the sink

When solving the problem of a strong smell in the sink drain, do not forget about prevention. It is easier and cheaper to prevent a problem than to call plumbers and promptly clean the pipe.

Prevention rules:

Regularly clean drains and pipes in the kitchen, spilling them with special compounds.
Keep plumbing clean.
Use special grates and nets in the sink to retain food debris.
When leaving home for a long time, pour a little sunflower oil into the sink to prevent evaporation of water and drying out of the corrugation bends.
Use high-quality removable siphons in systems.
Periodically disassemble the siphons and clean the flasks, corrugations.

Conclusion

There are many ways to rid your apartment of bad smell from the kitchen sink. After identifying the cause, chemicals are used to eliminate folk recipes formulations. In the future, do not forget about the prevention and maintenance of pipes, sinks clean.

Subscribe to our channel in Yandex.Zen!