Wooden do-it-yourself tool box. How to make a tool box: choose a shape and a drawing for self-production. What you need to make a wooden tool box

The idea to make a joiner's box was a long time ago, but all hands did not reach. As soon as the time was right, he got down to business. The choice of materials was based on what was at hand. Pine side panels, ash handle, beech side slats, plywood (pine) bottom. Beech planks in their past were 45 cm parquet. Drawer height 30 cm. Internal dimension 14 cm / 40 . At the bottom of the box was a compartment for chisels and jigsaw files. Seats for drills and pens for wood were also made. When assembling, I used D3 wood glue, screws and small nails. In general, it turned out to be a very compact and functional carpentry box in which everything you need is at hand.

I started by drawing a blank for the side wall of the box.

Rails selected for

Trying on the received blanks

Gluing drawer for chisels

Glued side stops for chisels

Installation of side rails

Reading time ≈ 5 minutes

A real owner always takes care of the safety of his tools. Even a small set should be stored in an orderly, neat manner. A skilled craftsman can assemble a container for tools and fixtures on their own. Below we will talk about how to make a tool box with your own hands. The presented photos and videos will help in the work.

Outwardly, the box looks solid and stylish, it immediately declares a serious approach to the life of its owner. Its dimensions (70x40x45 cm), i.e. 70 cm wide, 40 cm deep, 45 cm high. This is quite enough to accommodate a hand tool. The drawer has 3 drawers, as well as a top hinged lid that opens up a spacious compartment. This box allows you to protect tools from dust, organize safe storage.

Required Tools

To make a wooden box, you will need the following tools:

• a circular saw;
• milling machine;
• grinder;
• clamp;
• a hammer;
• wire cutters;
• file;
• wood saw;
• chisel.

Step-by-step instructions for making a tool box

The optimal material for the manufacture of the frame is oak wood. This is an excellent durable material, which is durable and resistant to mechanical stress. It is better to take as a basis - glued boards with a thickness of 19 mm. This material does not have knots and rotten inclusions. With the help of a circular cut a strip 38 mm wide.

So that when gluing the individual elements do not move relative to each other, a carnation is driven into the first part a little, its cap is removed with wire cutters, and then a second board is stuffed onto the protruding sharp tip.

The boards are additionally coated with glue and fixed.

The glue that has come out at the joints of the parts is removed with a chisel, you just have to wait for the glue to dry a little.

The result should be a 38x38 mm part. Its butt is polished.

The edge must be cut strictly at an angle of 90 °, so when cutting the part to the desired length, one must not forget about the cut angle.

This technique will help to ensure the accuracy of the cut angle.

The location of each part is marked so as not to get confused during assembly.

A groove is cut in each part along the entire length, it must go strictly in the center.

The grooves can be made either with a stationary circular saw or with a milling machine.

On parts that are intended for the manufacture of vertical corner supports of the frame, transverse markings are made.

Another longitudinal groove is made in the rear corner parts. It is not needed in the front corner bearings.

For subsequent fastening in the end part of the blanks, you need to find the center, noting the point of intersection of the diagonals.

It is necessary to carefully check the compatibility of the blanks.

The blanks are processed with a file.

In a freely assembled frame, marks are made to subsequently lengthen the grooves.

The grooves are cut with a hacksaw for wood.

Remove all excess with a chisel.

These blanks are needed for drawers. A corner is sawn from the end part.

Each blank is drilled for bolting.

Observing accuracy, it is necessary to drill the prepared parts.

The part intended for fixing and dividing 2 drawers is cut out at an angle of 90°.

Having installed the details for the movement of the boxes in place and fixing them, they gradually begin to screw them.

The corners of plywood blanks are cut off, as in the photo.

The walls of the lower drawers are attached to plywood sheets with self-tapping screws.

Prepared horizontal plywood parts are attached to one side. First, this is done without the use of glue.

During fixation with clamps, it is necessary to check the diagonal so that the dimensions match.

Drawers are made from plywood.

The grooves can be cut either on a stationary saw or with a milling cutter.

Details of drawers are fastened with glue.

The side parts of the boxes must have grooves for movement along the planks fixed inside.

For strength, the side parts are fastened with dowels, which are cut flush.

For reliability when gluing, small carnations are partially driven into the surface of the front wall of the drawers, their caps are removed.

After attaching the front panels to the drawers, they look to see if the individual elements are evenly positioned.

When gluing, it is necessary to observe the utmost accuracy, there should be no gaps.

At the end, the top frame of the box is made of plywood.

To make a precise cut at a 45° angle, it is advisable to use a special tool.

The blanks for the frame are connected and fixed when glued using a tension belt.

Every man in the house (apartment) must have a screwdriver, a hammer and at least a handful of different nails. If this is a master with "golden" hands, then you need to have a whole set of different tools for which you need a convenient box.

DIY tool box

Many tools (hammer or hacksaw) cannot always be placed in standard tool storage and carrying facilities. Therefore, craftsmen prefer to make with my own hands capacity right size. Consider the stages of work, how to make a tool box.

Material selection

Can be used: metal or plywood. But wood is considered a classic, which has long been the basis of carpentry. Therefore, it is easier to make a wooden tool box.

Type of shell

You should think in advance and measure where the chest doors and handle options will be located. The design can be open or closed to accommodate large items. It can be a large box with cells or a designer piece of art.

Interior decoration

The model can be simple for storing various little things or multifunctional: a separate row with holes for various screwdrivers, pencils, glue, pliers, etc.

Drawers with several floors are convenient, they can be inserted into each other or pulled out. The main thing is to achieve maximum order in the arrangement of parts, so that there are nails, screws, tape measure, power tools, etc. separately.

In the manufacture of a particular model, it is necessary to take into account the operating conditions:

• storage location (apartment, basement or garage);
• humidity level;
• temperature;
• frequency of use of devices and devices (professional activity or for home use).

Tool box designs

Before buying a compact model for different tools, we list the types of designs:

• The boxes are made of solid durable materials, often rectangular. There are a couple of drawers on the side. Hinged or removable lid with lock. The model is convenient for constant movement.
• A set of boxes is a set of open trays of different sizes that are convenient for the home.
• The case is a compact, durable suitcase, conveniently wide opening, and a handle on the side is a must. Large tools will not fit.
• The organizer is a low container with many cells. Maybe a case or bedside table with cells for small things.
• The tray looks like an open box with recesses, no handle. Not convenient for transportation.
• The bag looks like a sports bag, handles. The model is roomy, but not reliable, and the fabric lets moisture through.
• The backpack is adapted for storing tools, but it is inconvenient to get them.
• The container is a compact closed product with many drawers and sections, some are removable. Transformers are especially convenient.
• The trolley is used in factories, it is a large container on wheels with a comfortable handle. Many sections, easy to move over short distances.

Tool clothes

• This is a vest with pockets where various tools are distributed.
• A belt bag is an indispensable thing when repairing.
• Apron with ties at the neck and belt with pockets.
• Folded storage pouch.

Types of Best Tool Boxes

An important role is played by the material from which the structures for storing and moving various tools are made:

Tool box on wheels

Models made of plastic (metal) with a vertical body with 2 wheels. Convenient handle and lock, the model contains many sections. The only negative is the high price.

Aluminum

Boxes made of aluminum are the most durable and reliable. Popular models of metal boxes for any tools:

• Fit 65610 - aluminum body, equipped with a handle, mobile partitions inside, weight 1.5 kg.
• Dexter is the most compact drawer for small parts.
• Wilton 16910U is a handy aluminum case with steel hinges. Weighs 3 kg, has many pockets on the lid.

car boxes

• Bawer is a universal model, mounted conveniently under the car frame. The car box is strong and reliable, made of galvanized steel, but the weight is 12.4 kg.
• KAMAZ is a simple, reliable metal construction for long-term storage any inventory.
• I-580 is the most convenient model made of polyvinyl chloride (high-impact plastic with 3 types of steel). Weight 35 kg, capacity 90 l, reliable locks, perfectly protected from moisture.

Large capacities

• STANLEY Mobile Job Chest is the most practical, dimensions: 962:600:600 mm, made of thick plastic, amazing capacity.
• StanleyFatMax with the most thoughtful functionality. Lid with latches, inside 3 sections, there is a lower section for large tools. Handles on the sides, wheels make it a popular model.
• Peli 0450 - considered the most mobile: 3 handles and wheels with reverse. Sealed impact-resistant stainless steel case body, volumetric sections, containers are easy to insert into each other. The only problem - big weight and volume.

For balcony

Inexpensive models are suitable for storage on the balcony:

• Fit - the case is ideal for small parts, you can change the size of the cells. Sturdy plastic latch.
• Lot-3 - affordable, inexpensive and compact, there is a pen, colored trays.
• MosPromTara for the home, no sections, but there is a lid.

Organizers are more convenient in use for ease of transfer to any place.

With combination lock

• Brauberg - used to transport valuables. A shockproof case made of steel 8 mm and plastic is made, inside 6 cells.
• Hairway - with the greatest protection (metal with plastic), locks with a code on 2 sides of the model, dimensions: 420x215x330 mm.

metal

• Intertool is a popular drawer with 5 compartments, a secure lock and a comfortable handle.
• STANLEY Expert Cantilever is practical and convenient, 5 folding compartments, protection against finger injuries, comfortable handle, but heavy.

Plastic tool boxes

• StanleyClassic made of impact-resistant plastic, comfortable design.
• Tayg is made with amazing rationality, everything is compactly placed.

Professional

Stanley is reliable and indispensable, corrosion protection, handles are equipped with soft inserts. Removable castings inside, special compartment for drills, etc.

Bosh LT-BOXX - simple in execution, but reliable. The strength of the product provides acrylonitrile butadienstrol.

Photos of the best tool boxes

The various designs of tool boxes discussed in the article are united by the ease of doing it yourself. Choose the right project and, guided by our drawings and photographs, make yourself a convenient portable storage for the tools and equipment used in your work.

simple open box

This box is good because the tools in it are located in their places and are in sight. You can’t put many devices in it, but there is a place for the main ones. An open box is useful in household use when you need to repair something outside the workshop: they reported to the box what was missing and went to work.

A wooden tool carrier comes out heavier than factory counterparts, so you should not plan it too bulky. The box will not beat the knees if you make it narrow. The high handle also adds convenience - you don't have to bend down low to pick it up.

Pick up suitable pieces of plywood and pine board trimmings. Mark and cut out the details of the box. Select the grooves in the blanks with a hand router or make two cuts with a circular saw and clean the recess with a narrow chisel.

Details of the box body: 1 - wall (2 pcs.); 2 - sidewall (2 pcs.); 3 - bottom; 4 - groove along the thickness of the partition and a depth of 1/2-1/3 of the thickness of the material

Sand the surfaces and assemble a rectangular box from blanks. Lubricate the ends with carpentry glue and fasten the parts with small carnations.

Saw out a central partition from 5 mm plywood, the width of which should be 1 mm less than the distance between the grooves in the walls of the box. Mark the location of the cutout for the hand, drill the entry hole for the file, and cut the plywood with a jigsaw.

Partition drawing

Spread the grooves with glue and install the partition in place.

Make two pads for the handle from a block with a section of 20x45 mm, rounding the corners of the blanks with a planer. Prepare holders for hand tools from the rails: in one, cut out recesses for pliers and tongs with a jigsaw, and in the other, drill holes for screwdrivers with a drill. Using glue and screws, fix the parts to the partition by placing them at different heights.

So that the surfaces do not get dirty for a long time, cover the box with varnish.

Toolbox in stool

In this upside down stool, you can move the tool to any place in the house or yard, and put it on its legs, reach for a shelf or hammer a nail where your height is almost not enough.

Using plywood or OSB with a thickness of 10-15 mm, cut out the cover (item 1), longitudinal sides (item 2) and sidewalls (item 3) according to the dimensions indicated on the drawings.

Make a handle and four legs with bevels at the ends at an angle of 15 ° from bars with a section of 40x50 mm.

Assemble the stool by fastening the parts with screws.

Box assembly scheme: 1 - cover; 2 - tsarga; 3 - handle; 4 - leg; 5 - sidewall

Round the edges of the cover and the oblong cut in it, apply a finishing coat.

Box for the young master

If your child enjoys crafting or repairing, make a small box with him for his favorite tools.

Take planed 16mm boards and cut out the pieces according to the drawings. Prepare a round birch stick for the handle.

Drawings of the details of the box: 1 - sidewall; 2 - bottom; 3 - handle; 4 - handle stand; 5 - holder

Draw lines parallel to the edges on the sidewalls corresponding to the positions of the handle posts, drill through holes for the screws between them.

Remove the burrs with sandpaper and proceed to assemble the box. Connect the bottom and sides with glue and screws, then install the handle stand along the marking lines.

Now replace the second post while inserting the handle into the blind holes. Screw on the screwdriver holders.

Color the box in the color your child chooses.

Wooden box with lid

The necessary set of tools varies depending on the hobby or profession, respectively, and the internal structure of the box may be different. The next tool carrying option is suitable for any equipment, it is distinguished by its solidity and reliability.

Use light wood for the box: pine, linden or poplar. The optimal thickness of planed boards is 12 mm, thinner ones are more difficult to fasten, and thicker ones will increase the weight of the structure.

Required accessories:

1. Pen.
2. Corners - 8 pcs.
3. Latch — 2 pcs.
4. Loop - 2 pcs.

Mark the lumber according to the drawings and cut the blanks.

Cutting blanks for the box

Table. Parts list

Make sure the cutting is correct by folding the box out of the blanks. Sand one by one all the parts with sandpaper No. 220 and mark them. Assemble the bottom and lid of the drawer using clamps, corner clamps, or mounting brackets to secure the blanks. Lubricate both joining surfaces with wood glue.

Drill guide holes for the screws and countersink for the hats, and after fastening the parts, wipe off excess glue with a rag.

Fasten the blanks of the body of the portable part. Replace the dividing partitions by screwing them on the sides and bottom with screws.

Screw the carrying handle in the middle.

Install support rails inside the drawer at a distance of 30 mm from the top.

Clean out pencil marks and burrs near the screws with a fine sandpaper, blow dust off the surface.

Cover the box with a layer of polyurethane varnish, after drying, remove the raised pile with a “zero” and repeat the finish.

Align the hinges with the gap between the body and the lid of the box. Mark and make pilot holes for screws 10 mm deep, fasten the hinges.

Screw on the corner pieces using small screws.

Install the handle and latches on the lid.

Fill in finished box tool.

If desired, place containers with dividers or cassettes for storing small items in the large compartment of the drawer.

If you decide to add partitions inside the box, make them removable so that you can change the free space for a new tool.

Every man will agree that a high-quality and multifunctional tool box is an almost indispensable thing in the household. Many masters prefer to buy a ready-made box in the nearest store, where a wide range is presented. But such a device can be made independently, in accordance with personal wishes. Moreover, the manufacturing process itself is not considered difficult, thanks to which even a beginner can cope with this task.

Classification of tool boxes

There are several main criteria by which multifunctional products can be divided into several main groups.

According to the material from which the case is made:

By type of stored instruments:

Construction of modern boxes

Speaking about the design of such boxes, we mean not their shape, but the way of opening and the presence of auxiliary sections. The following designs are considered standard today:

Making a plywood box

To make a do-it-yourself tool box out of plywood, you will need the following tools and materials:

Before proceeding with manufacturing, you need to carefully work out the design of the future product (the drawing can be made on a computer or on plain paper). Produced necessary calculations, the main dimensions are fixed. After that all marks must be transferred to a sheet of plywood. You can do this with a regular ruler, tape measure, marker or even a pencil. All blanks for the future box are cut along the marked lines. And also it is necessary to mark all the grooves and cut them on the blanks. The irregularities formed during the work can be processed with a chisel. It is thanks to the grooves that the final design of the box will turn out to be stronger and more durable.

The next step is to assemble the entire structure. To glue small parts, use high-quality wood glue. The main sides of the box are also glued together. To improve the result, they need to be pressed tightly against each other. It is best to use a special rubber strip for this. You can not remove it until the glue is completely dry. On the doors you need to round the corners.

A convenient handle for boxing with tools can be made from MDF. Initially, the layout is drawn directly on the wood and only then cut out. When the handle is ready, the surface must be treated. It is attached with carpenter's glue and screws.. If you don’t want to make a handle yourself, then you can buy it at a hardware store. Main criterion right choice- high strength and reliability. Now you need to attach the outer cover of the drawer and the door. All parts are applied in their places, and then the areas for fastening the loops are marked with a pencil.

To organize the order in the box, you can make small compartments. All components are cut out according to the same principle as the box. Grooves are made and glued. On one side of the box, you can make a special compartment for storing screwdrivers. The most convenient option is considered where this function is performed by special inserts with plywood slots. Velcro is attached to the other side of the drawer to store cables and extension cords.

Wooden box manufacturing technology

It is this option that is considered a classic carpentry. Drawings of this portable storage were printed in magazines 50 years ago. For the manufacture of you will need a high-quality board with a thickness of 10 to 20 mm, as well as a hacksaw for wood. Thanks to the simple manufacturing technology, many craftsmen still choose this option.

The classic design does not provide for the presence of separate compartments or special multifunctional devices. The final product will look like a neat deep box with a comfortable handle along the entire length. This shape of the handle has a practical purpose. After all, if the weight of the tools used is unevenly distributed, then you can always find the point of the center of gravity.

A practical addition can be an insert section with its own handle, the height of which occupies 50% of the entire drawer. This insert can be used for small tools(awl, screwdrivers, small keys), as well as consumables (screwdriver bits, electrical tape, drills). For its manufacture, you can use any type of wood.

Universal case made of plastic canister

If you want to make a do-it-yourself tool box, but there is no plywood sheet, then you can use a regular plastic canister. For work you will need:

• Hacksaw.
• Plastic container.
• fasteners.

The canister used must necessarily be rectangular in shape with a comfortable handle, which must be located in the center. In addition, it must be equipped with a screw cap that will be used as a lock.

The process of making a box is quite simple. Using a hacksaw, you need to make cuts in the canister. The first cut should fall on the center of the neck and the handle of the container, it is best to remove the cork and saw through the top wall. The second cut is made exclusively in the horizontal direction. It is best if it is located at the top of the canister, on the end sides. The plastic container itself needs to be sawn from the top wall at a distance of 4 cm, and on the sides by 3 cm.

When all cuts are made, the canister can be opened. To do this, you need to bend all the side parts of the top cover with the halves of the handle. This box can store various materials for fasteners: nails, bolts, screws, nuts. The upper part must be closed by folding the handles together. Such a device is fixed with a screw cap.

To make the box as strong as possible, on the end walls it is necessary to make additional gaps. Small holes are drilled in the lid itself or in the walls, into which hooks are inserted, as well as bolts with nuts.

Metal box for tools

This option is most suitable for experienced locksmiths who have necessary equipment and material. Factory metal tool boxes are made from lighter metals such as aluminium. As a result, the product is as light and durable as possible. But working with aluminum at home is much more difficult.

Even a beginner can make this version of a metal box. After all, the most ordinary box and special partitions will be made of metal. Initially, you need to prepare the main material - galvanized steel (0.4 mm thick). From the tools you need to prepare:

• Marking caliper.
• Metal square.
• Ruler.
• A hammer.
• Pliers.
• File.
• Sharpened core or marker.
• Anvil.

Next is drawing and marking. You need to mark only those places that will later need to be deleted. Now you can start trimming with metal scissors. After trimming everything superfluous, you should get a kind of geometric figure (winged rectangle).

Next, you need to use the anvil. Tapping with a hammer, gradually bend the edges of the workpiece. It is better not to work in a chaotic manner, all actions must be consistent. First, one sidewall is bent, and then another. To wrap protruding parts, pliers are used.

After these manipulations, you need to go over the entire structure with a hammer to align it. In this case, you get a small metal box for storing tools. In the future, you can experiment not only with the sizes, but also with the shapes of such boxes.

Almost every home has one or another tool. When there are too many of them, you can independently make a multifunctional box for storing them. Experienced craftsmen It is believed that such a box is considered an essential attribute for storing various devices. Such boxes can be stored in the workshop and even taken with you on a long journey.