A qualitative survey of networks and structures will avoid many troubles. Survey of engineering systems, networks and equipment Instrumental survey of networks
1. We conduct a survey of engineering systems in the following scope:
- Inspection of hot water systems - description of the DHW system, inspection of pipelines and circulation pumps, description of the preparation technology hot water and used water heaters, instrumental measurements - temperature measurements, determination of the thickness of corrosion deposits. Development of drawings with the application of pipelines and wiring of the hot water supply system on floor plans, indicating the diameters and linking to existing structures.
- Inspection of heating and heat supply systems - inspection of the heat input and central heating, description of the heating system and the layout of the supply and return lines, inspection of heating devices, taking temperature measurements, determining the thickness of the narrowing of the living section of pipelines, drawing the heating system on floor plans.
- Inspection of cold water supply systems - inspection of the water supply to the building, inspection of the metering station cold water and instrumentation, description of the water supply system, determination of the thickness of corrosion deposits in pipelines, drawing the cold water supply system on plans with the designation of diameters.
- Inspection of sewerage systems - inspection of pipelines and sanitary appliances, inspection of ventilation risers and revisions, determination of the slope of horizontal pipelines, drawing sewer risers and appliances on floor plans.
- Inspection of ventilation systems - type identification ventilation system, inspection of ventilation ducts and ventilation equipment, determination of air exchange in the examined premises of the building, identification of defects and comparison with regulatory requirements.
- Inspection of waste disposal systems - examination of waste collection chambers, establishing the integrity and tightness of the shaft, establishing compliance with the requirements of the design and normative documentation.
- Inspection of gas supply systems - description of the structural diagram of the gas supply system, study of documentation for gas pipelines and equipment, determination of the compliance of the gas pipeline system with design documentation.
- Examination of the technical condition of drains - a description of the drainage system, reveals unacceptable damage - blockages, tightness of joints, the presence of gratings and caps, the presence of an electric heating cable.
- Inspection of electrical networks and means of communication - description of the input-distributing device, inspection of electrical cabinets on floors, inspection of lighting fixtures, inspection of low-voltage systems, drawing electrical panels and power supply wiring on building plans.
- Survey engineering equipment- the actual state of the equipment used is determined for various purposes. Physical and moral wear and tear is determined in accordance with the identified defects and malfunctions.
2. The composition of the technical report on the inspection of engineering systems and networks
1. Explanatory note - description of the subjects engineering systems
2. Inspection of heating and heat supply systems of the building
- description of heating and heat supply systems
- drawing heating systems on floor plans
- instrumental examination of heating and heat supply systems, defects, conclusions and recommendations
3. Inspection of building ventilation systems
- description of ventilation systems
- drawing ventilation systems on floor plans
- instrumental examination of ventilation systems, defects, conclusions and recommendations
4. Inspection of water supply and fire extinguishing systems of the building
- description of water supply and fire extinguishing systems
- drawing water supply and fire extinguishing systems on floor plans
- instrumental examination of water supply and fire extinguishing systems, defects, conclusions and recommendations
5. Inspection of the building's drainage systems
- description of drainage systems
- drawing drainage systems on floor plans
- instrumental examination of drainage systems, defects, conclusions and recommendations
6. Inspection of building electrical systems
- description of power supply systems
- drawing power supply systems on floor plans
- instrumental inspection of power supply systems, defects, conclusions and recommendations
7. Results of calculations of existing loads on the building, analysis of input nodes for the possibility of increasing loads, identification of places for possible connections of new networks
8. Conclusions based on the results of the inspection of engineering systems of the building
10. Executive schemes - plans with applied engineering systems
Price of inspection of engineering networks and systems
To clarify the final cost, call the number indicated for consultation with our specialists.
The final price of the work is formed on the basis of:
- type of engineering networks;
- the complexity of the equipment used;
- quantity and availability of equipment.
Inspection of engineering systems is required:
- in case of regular accidents;
- in case of deviation in the operating mode;
- upon occurrence contentious issues during the design, installation and operation of equipment.
What is a survey of engineering networks
This is a series of actions aimed at a thorough check and assessment of the technical and operational condition, functionality, presence of defects and damage to part or all of the network, compliance with all accepted standards. Also carried out before implementation in the network additional equipment to get an accurate answer whether the rules and regulations, as well as the characteristics of the system, will support its safe operation.
We carry out such inspections of systems and networks using special equipment, buildings, internal and external networks, equipment are checked in accordance with all the rules accepted normative documents. That allows you to determine the possibility of their further operation or improvement, makes it possible to determine the need for repairs in time, which will avoid any emergencies and save money on a complete replacement of equipment.
When we conduct a technical inspection of engineering systems in Moscow:
- If it is necessary to determine the wear and tear of equipment and the network as a whole, which will help in the timely resolution of emerging problem points
- If necessary, determine the possibility of repairing and restoring the engineering network
- In a comprehensive assessment of the entire building of the enterprise for the examination of project documentation
- To determine the feasibility of increasing the load on equipment
- To draw up a task for documentation on the improvement, modernization and repair of engineering systems
Our offer for the survey of engineering networks of buildings:
Examination is one of the most time-consuming processes, which requires the availability of highly qualified personnel and an extensive base of instruments and equipment. LLC "SoyuzTechService" offers its customers to conduct an examination in Moscow and the region for the following objects:
- heating systems, cold and hot water supply;
- sewerage and water supply;
- ventilation and air conditioning systems;
- power supply systems.
The survey is carried out as soon as possible. This became possible thanks to the use of modern diagnostic equipment and computer analysis. In the process, we perform the following work:
- Search for hidden leaks, search for underground utilities, search for illegal tie-ins, assessment of the residual life of pipelines.
- Diagnostics of equipment serviceability with quality control of installation and commissioning.
- Examination of networks to detect deviations from normal operation and other malfunctions.
- Formation of a report on the examination with the provision of recommendations regarding all stages of the work performed.
A more detailed description of the examination of engineering networks in Moscow and the region:
- We conduct a thorough inspection of pipelines and components of hot water supply, which includes Full description of the entire system, inspection of pipes and pumps, carrying out all necessary measurements using special tools (measuring the temperature state of the system, analyzing deposits in the pipeline, etc.). Drawing up a detailed report on all the work carried out, on the identified problem areas. And also we are engaged in the elimination of these problems, which will allow you to save time searching for other services to solve the problem situations that have arisen.
- We carry out an examination of heating systems, which includes a detailed examination of the inlet pipeline and central heating, checking all heating devices, taking measurements using equipment, analyzing the useful diameter of the pipes, as well as providing options for solving problems with each of these sections, if any. We will be able to eliminate these shortcomings at a low cost, because for complex works we will make a discount.
- We carry out an assessment of cold water pipelines, which includes the same elements as in the inspection of hot water supply, and also provide services for repairing, cleaning and restoring the original diameter of pipes.
- We carry out an examination of sewer networks, which includes a complete inspection of pipes and all connected equipment, inspection of ventilation, checking all angles of inclination for compliance with optimal requirements, and we also provide services to solve all these possible problems.
- We check the ventilation systems of buildings, carefully inspect all air ducts and equipment, use devices to measure the correctness of air exchange between all parts of the building, identify and solve all the problems that have arisen.
- We make an examination of electrical networks, check all devices, cabinets, cables, low-voltage networks, carry out repairs if necessary.
