How to make a trampoline from a wheel. How to make a trampoline at home. Do-it-yourself trampoline: step-by-step instructions for making a sports equipment How to make a children's trampoline at home. Do-it-yourself trampoline or ready-made projectile

It can be made by hand. At home, this is not at all difficult. All you need is a little time, effort, diligence, and everything will work out. Of course, it’s unlikely to make a chic children’s inflatable trampoline, but we promise a modest sports equipment for the entertainment of children.

Before explaining how to make a trampoline with your own hands, it should be said that there are different kinds trampolines. The 2 most common types are children's trampoline with springs and an inflatable trampoline. The first type of trampoline is a metal support on which a trampoline mat with built-in springs is attached. The children's trampoline can be surrounded by a protective net, thanks to which the child will not fall out of the limits. An inflatable trampoline can be very bright and represent a whole palace, but it is better to buy an inflatable trampoline ready in the store.

Step-by-step instruction

So, how to assemble a children's trampoline at home with your own hands?

We present step-by-step instructions and photos for it.

Step 1. You can buy trampoline blanks or make them yourself. Lay out all parts of the trampoline frame.

Step 2. We begin to connect the ends of the foot section of the trampoline.

Step 3. Fix the ends of the frame, as shown in the photo.

Step 4 Lay the frame on the ground with the leg holes facing up. Insert the W-shaped legs of the trampoline into the holes, gently pressing on them.

Step 5. Turn the frame over and put it on its feet.

Step 7. Next, we fix the mat with hooks. We do it evenly. Imagine that the checkmate is a clock. We fix it first in those holes that are proportional to the numbers 12,3,6,9 on the dial. Thus, the trampoline mat will lie evenly. Some trampolines have round holes so you can easily attach them.

Step 8 Attach the rest of the springs by doing this diagonally.

Another tip: the top of the trampoline legs can be sealed with foam rubber for softness and durability. The bottom part should be sealed with a piece of rubber so that the trampoline does not slip.

In the video, you can see in detail and clearly how to assemble a children's trampoline with your own hands.

What can be used as improvised materials?

If you do not have ready-made parts for assembling a trampoline, you can assemble it from improvised means. A metal hoop is suitable for the frame, in which it is necessary to make holes with a drill. Is taken wooden beam ok and sawn into 8 parts of 30 cm each. Holes are made in the bars 2 mm larger than the diameter of the hoop. The hoops are separated and threaded through the holes. The mat is made of tarpaulin, along the edges of which stronger loops are sewn. Durable rubber is threaded into the loops and wrapped around the hoop. A cover is sewn from a tarpaulin so that it can be put on a trampoline. Thus, the child's legs will not fall into the holes. This is one of the options for how you can make a trampoline with your own hands.

How to seal a hole?

It is unlikely that it will be possible to make an inflatable trampoline with your own hands: it is too difficult. If you had an inflatable trampoline, but it began to let air through, you can seal it yourself. To determine the place of air leakage, in a quiet place we pump the trampoline as much as possible and listen: the outgoing air will make itself felt with a small whistle. For gluing you will need:

1. sandpaper,
2. a patch from some old inflatable toy, if there is no spare in the trampoline kit, a degreaser (gasoline or alcohol),
3. glue of the "Moment" type.

With sandpaper, we clean the place of damage and the patch. We degrease the place of damage, carefully apply glue to the trampoline and to the patch. We wait 5-10 minutes, and then glue. In order for the glue to grab, we put polyethylene on this place, then polystyrene, and put a load on top. A few hours later, the patch is ready.

Thus, having faith in yourself, you can do a lot. Of course, you can buy a trampoline in a store or take it to the master in case of a breakdown, but if it is not possible to do this, do not despair: you can make an excellent trampoline with your own hands.

Probably, every child would like to receive their own trampoline from their parents, where they could jump and have fun with friends. In addition, such a children's simulator helps to develop and strengthen muscles and the pulmonary system.

To begin with, you will need to saw a wooden block into pieces of 30 cm. There should be eight in total. Measure the diameter of the hoop you need. Then drill holes in the bars, with a diameter of 2 mm wider than the hoop. Holes are drilled close to the edges and on both sides of the bar. We separate the hoops and string the bars. Next, you need to cut a circle of canvas fabric, with a diameter of 1 meter. Hem the edges of the circle. The loops are made from a sling, 3 cm thick. A total of 16 loops are needed. Loops are evenly sewn to the canvas circle in a circle. Round thick rubber is threaded into the loops. Make sure the rubber is well tensioned.

For children's safety and to prevent the child's legs from getting into the gap between the loops, it is necessary to make a special cover for the canvas circle. At eight points, either ropes or elastic bands are sewn to it and distributed throughout the circle. Fix the cover, with the help of sewn elastic bands or ropes, on the legs.

With glue, pieces of foam rubber are attached to the upper parts of the legs. Pieces of rubber are attached to the lower ones to prevent the trampoline from slipping. That's all - the children's trampoline is ready.

Quite often, in summer cottages, I use a car tire of large diameters as the basis of a trampoline. You can decorate the simulator for children according to your taste and imagination. Your child will certainly be delighted with such a surprise.

• When a child appears in the family, it becomes necessary to protect him from sharp corners or dangerous objects that he, not knowing, can take into his mouth or cut himself.
• Everyone dreams of having a comfortable home. We want to make the most comfortable room for our child, because we ourselves know more about his habits, desires and character. So let's get started.
• The long-awaited summer is coming soon. But, as a rule, the only place where families most often go to rest is the dacha. In this regard, the main task for parents is to equip
• Sooner or later, all parents are faced with the question of who to leave the child to. Have you finally decided to go on vacation with your spouse just the two of you, or you are already going to work after the decree. Or you
• Boards, some paint, some decorative battens - that's all you need to build a play camp.

The dacha is considered an excellent area for family recreation, where adults can relax from working days, and children can throw out their energy as much as possible in clean air. To protect the games of little fidgets, other parents place trampolines in suburban areas. These simulators can be both purchased ready-made, and independently made with your own hands from improvised means.

Peculiarities

A children's trampoline is a device designed for jumping. Classes on it have a positive effect on the whole body. Kids not only get a lot of pleasure and pleasant emotions, but also develop the vestibular apparatus, motor skills and the musculoskeletal system. Despite the fact that in recent times on sale you can find many models of trampolines, it is quite possible to build them yourself. You can assemble a trampoline with your own hands from different material, but in order for the jumps to become safe, a protective net must be present in their design.

When making a trampoline at home, it is important to pay attention to the strength of the frame and the installation of springs. The main feature of homemade trampolines is that in them one of the sides is attached to the frame with the help of springs, which require a special layout. First, you need to perform the primary hold, attaching the springs to every third loop. It is necessary to observe a step in two loops so that the elements do not deform, but evenly stretch.

For a homemade simulator, it is best to choose long springs. In addition, it is important to pay attention to the choice of material for the frame - it must be durable. Before you make a children's trampoline, you should also decide on its dimensions by drawing up a drawing in advance.

Material

A country trampoline can be made from ready-made parts that are sold in a wide range. If it is not possible to purchase them, then suitable improvised means can be used for assembly. For example, make a frame from a metal hoop, in which it is done with a drill required amount holes. You will also need a wooden block - it will have to be cut into 8 identical pieces, no more than 30 cm long. Holes are made in the wooden parts, the diameter of which should be several millimeters larger than those in the hoop.

To create a mat, you need to choose a durable material. A tarp works well. A cover is sewn from it, corresponding in size to the circle of the trampoline.

And also a children's trampoline can be made from the camera. Options to create home gym a lot, the only thing is that the material from which it is planned to be assembled must be reliable and of high quality in operation.

How to do

Making a trampoline for your baby is not difficult if you show diligence and a little imagination. Of course, it’s impossible to create a chic projectile at home, but a modest home-made simulator will serve as a great place for a little fidget to play. Before starting the workflow, it is important to decide whether the trampoline will be spring or inflatable with a net.

The first type is made from a metal support and a mat attached to the frame with springs. It is equipped with a safety net for safety. The second one is difficult to assemble at home, so it is better to refuse the idea of ​​​​making it.

In that case, its assembly of a children's trampoline is performed for the first time, then the following instructions will help the novice craftsmen.

1. First you need to prepare the material for the manufacture of the simulator. It is best to purchase ready-made parts. If you plan to make a trampoline from improvised materials, then you will need a metal circle, bars, dense fabric, springs and a mesh.
2. The first step is to connect the legs of the structure. For this, a frame from a circle is preliminarily prepared. Its ends are carefully fixed. Then the frame is turned over and placed on a flat surface so that the holes for the legs are at the top. You need to insert W-shaped inserts into them, performing smooth pressure.
3. Then the frame is turned over and put on legs. The next step will be the manufacture of a mat, the cover of which should be sewn from tarpaulin in advance. A cover is put on a circle cut out of dense material, and then fixed inside the trampoline with the help of special hooks. This must be done carefully and slowly. In order for the mat to be evenly distributed, it should be visually represented in the form of a clock and fastened first in those places that correspond to 12, 3, 6 and 9 hours on the dial. Then fix the springs diagonally.
4. The work is completed by fixing the pillow. It is applied on top of the trampoline, then the ropes are taken and passed through the springs, securely fixing the playing place. In addition, it is recommended to additionally seal the upper part of the legs with soft foam rubber, and the lower part with rubber. Thanks to this, the trampoline will be durable and will not slip.

The above design is simple and it is quite possible to assemble it with your own hands. This product is almost indistinguishable from the factory. If the trampoline is going to be for kids, then it must be additionally covered with a net or placed under the mat. This will protect the play of a small child. Such a simulator is perfect for children under the age of 12, while teenagers should assemble more powerful structures.

Some craftsmen make country trampolines from car tires. Holes are drilled on them closer to the tread, observing a step of 2 cm. Then the open middle part of the tire is “darned” with strong rubber or a thick cord. The result is a tight stretched mesh, it will perfectly support the tarp and protect the child from injury. In this design, you can do without legs, since the tire has sufficient height.

How to make a trampoline with your own hands, see the following video.

All caring parents strive to accustom their children to sports so that they grow up strong and healthy. But how to interest little fidgets? This problem can be solved with the help of a children's trampoline, on which the baby and his friends can have fun and develop physically.

What is the use of a trampoline?

Jumping on this projectile contributes to:

• stabilization of the cardiovascular system;
• improving the emotional state, coordination and control of one's body;
• development of the vestibular apparatus;
• increase endurance;
• simultaneous training of many muscle groups.

Types of trampolines

Since the scope of the projectiles under consideration is quite wide, they can conditionally be combined into three types:

1. Sports - used by athletes in preparation for competitions. To install these trampolines, special gyms with a high ceiling are needed, because it can throw an athlete up to ten meters in height. An alternative option is outdoor installation.
2. Amateur - it is good to do aerobics or practice high jumps on it. They are usually smaller than sports shoes and are made of other materials, but there is a variety of sizes and colors. For the safety of children, they often have a special protective net.
3. Inflatable. Their mission is to entertain children. It attracts bright shape, colors and ergonomics, as well as the scale: whole gaming complexes or attractions are made. The advantage of inflatable trampolines is their compact size when folded, making it easy to find a place in a regular pantry.

Manufacturers

Specialized stores are full of a variety of home trampolines. In order not to get confused, you need to answer a few questions for yourself: "where will it be used (in the house or on the street)", "how old are the children", and also set a limit on the purchase budget.

So, trademark Hasttings manufactures sports trampolines High Quality without worrying too much about the design. Outwardly, these are strict and simple shells that will seem uninteresting to kids, but will be appreciated by schoolchildren. Depending on the size and configuration, the price for them varies from 2 to 35 thousand rubles.

The Dutch brand Berg offers a wide range of trampolines: classic and inflatable, different forms and colors with a high degree safety and quality. But the price range is much higher: 12-46 thousand rubles.

The HappyHop brand specializes in the production of inflatable children's trampolines. They are made in the form of entire inflatable towns and are perfect for installation in a country house or a playground. Their cost ranges from 2 to 50 thousand rubles.

The Intex company, which is widely known as a manufacturer of a wide range of inflatable products, offers budget models (1-5 thousand rubles) of children's trampolines. These products are characterized by durability and safety for the smallest jumpers, as all products are thoroughly tested and comprehensively researched.

Trampoline at home

Unfortunately, not all parents have the opportunity to purchase such a popular projectile for their child. But do not despair, because it is quite possible to make a homemade trampoline with your own hands. Let not as chic as they show in advertising, but one of a kind.

Before you get started, you should decide what type of projectile you will be doing. The most popular among children are spring and inflatable trampolines. The first type is nothing more than a metal support with an attached (with built-in springs) trampoline mat, which is ideally surrounded by a protective net that prevents the child from falling out when jumping. The second type is an inflatable one: undoubtedly very bright and popular, but it is better to entrust its production to professionals, since a home inflatable trampoline is a “three-star task”.

Step-by-step instruction

1. You should start with the purchase or manufacture of blanks. Now let's expand all the elements of the frame of the future trampoline.
2. Next, you need to connect the ends of the lower section of the product.
3. The next step is to fix the ends of the frame.
4. Then we put it on the ground in such a way that the leg holes are at the top, into which we insert the W-shaped legs of the trampoline by gently pressing on them.
5. Now the frame needs to be turned over and put.
6. Next, to make a home trampoline, you need to fix the mat inside, for which we need hooks. It is necessary to carry out uniform fastening according to the principle of the dial: on the holes, which are conditionally located on the numbers 3, 6, 9 and 12. This will ensure an even distribution of the trampoline mat.
7. Next, you should fix the remaining springs - diagonally.
8. The final step is fixing the trampoline pillow: put it on top, then use the rope to secure it, throw it over the spring, return it to its original place and tie it.
9. In order for the trampoline to be stable and not slip, the legs at the bottom must be sealed with rubber. The upper parts of the racks should be sealed with foam rubber to make them softer and more durable.

Here is such a simple instruction explaining how to make a homemade trampoline.

From what's at hand

It is unlikely that in the house of an average family there are ready-made parts for constructing a trampoline. This is not scary, because they can be made from improvised means. An iron hoop can serve as a frame, in which you need to drill holes with a drill. Next, you need to take a wooden beam, which can be sawn into 8 equal parts (0.3 m each) and make holes in them, a little more (2 mm) than the diameter of the frame. We separate the hoops and thread them into the resulting openings.

If strong loops are sewn to the edges of the tarpaulin and strong rubber is threaded into them, you get a trampoline mat, which will only be wrapped around the hoop. From the same material, you can make a cover and put it on the structure to prevent the child's legs from falling into holes. So, from improvised materials, a home trampoline for children is quite obtained.

Another option

If the above materials were not at home, do not lose heart. There are many other, at first glance, unnecessary things that will help in this matter. So, if you take a mesh from an old Soviet bed and a spring, connect them to a solid metal or wooden base, you get a homemade trampoline with a mesh. In this option, you need to pay attention to safety: remove sharp parts and use soft material to wrap a solid base. An alternative when building a home trampoline is the option when the spring net does not need to be placed on an elevation, and the frame is placed on the ground with a previously dug recess. The pit must be deep enough so that the heaviest jumper does not touch the bottom of the pit while jumping. The edges of the metal frame must be buried in the ground or covered with soft mats.

Tire trampoline

Surprisingly, even with the help of an old car tire, you can make a homemade trampoline. Ideal in this case there would be a tire from a large tractor wheel due to its large diameter. At a short distance (about 3 cm) from the edge of the upper edge of the protector, we will make holes through which a rubber cord or rope will pass. We fix inside the jumping canvas, made as described above in the step-by-step instructions. The rigidity of the structure can be adjusted in the presence of a metal hoop or wooden board required diameter.

Buy or do?

A do-it-yourself trampoline has two indisputable advantages over factory "brothers":

1. Price. In the presence of improvised means, of which thrifty owners have plenty, it practically reduces to zero. But even with the purchase of ready-made parts for a trampoline, their cost will be much lower than a new factory product.
2. Uniqueness. Your child can be sure that there is no second such trampoline, which you can safely brag about to your friends.

Of course, factory products benefit greatly in the variety of sizes, models and colors. And the larger the purchase budget, the wider the choice. And ready-made inflatable trampolines have no competition at all, because it is almost impossible to make them yourself. For small children, inflatable home trampolines are very often chosen. Customer reviews of this projectile are mostly positive: it performs its entertainment and sports functions perfectly, not inferior to analogues in strength and safety.

However, this does not mean that the number of “Kulibins” has decreased. With due attention to detail and understanding of the principle of operation, it is possible to make a sports equipment more or less suitable for entertainment, for example, a trampoline. But we warn you that an untested and uncertified design can be a real health hazard! Therefore, you should not undertake experiments if you do not have at least an approximate idea of ​​\u200b\u200bhow to reduce injury risk. If you still want to experiment, we offer you several variations of designs.

Perhaps everyone is familiar with such a primitive way to have fun, like trampolining in the form of an old bed with a grid. This design is quite reliable, but has many sharp corners and solid jumpers. To safely jump on it, you need to remove all corners, cover the frame with dense but soft material and sew a cover that would cover all dangerous places.

Another option is to dig a frame with a net into the ground so that the heaviest jumper does not reach the bottom of the pit. The edges are best closed with mats.

More technological, labor-intensive and interesting option- This is a trampoline made of metal hoops. You will need two hoops, which must be placed one above the other by connecting them with metal or wooden legs. Next, a special dense fabric is purchased, for example, a tarpaulin. The edges are processed, to protect against tearing, and along the perimeter, cut to the size of the hoops, the circle is sewn on loops. You can fix the resulting canvas to the hoops using a thick rubber band. You also need a cover around the perimeter of the structure and a lining in the form of dense foam rubber.

If there are no hoops, then a large car tire will fit under the design of the canvas from the previous “recipe”. Usually such designs are suitable only for the smallest jumpers.

Certainly the best and safest option extreme having fun jumping is buying a certified product. The cost of some models is quite affordable, on average, a trampoline will cost 3-35 thousand rubles.

If you just want to forget everyday problems from time to time and plunge into the world of extreme sports, then we are in specialized halls. We wait!