Carpenter's tool box. How to make a tool box: choose a shape and a drawing for self-production. What you need to make a wooden tool box

1. Types of convenient boxes
2. Material selection
3. Stool-like box
4. Small portable option

The master always has his own tool at hand. It allows him to quickly cope with the tasks. There are not many tools. Sooner or later there are so many of them that no pockets are enough to spread out all the screwdrivers and rulers. Need a box. You can't store them in a mess. Impacts, friction - drills become dull and quickly fail. In the process of work, there is not always time to look for the right screwdriver, so the space of a capacious wooden storage should be used, and the entire volume should be distributed into separate compartments.

The easiest way is to buy a container made of plastic or iron. Inside the finished models, the storage place for tools has already been thought out in advance, divided into several compartments. But a homemade box is assembled for each specific master, taking into account storage places for tools, consumables and fasteners. Some will fit the simplest models, others will need a multifunctional portable case. It makes sense to know what types of portable storage exist to choose suitable model, and then construct one with your own hands.

Types of convenient boxes

According to the form of manufacture and purpose, tool boxes are classified:

1. Portable.
2. Stationary.
3. Special.

Portable containers for carpentry tools - compact models, inside of which a small number of things needed in the work are placed. The complete set of the case depends on the specialization of the master. Its design assumes a strong lock that will not open during long transportation. The portable box is constantly in motion, so it is important that several types of fasteners, convenient niches are thought out inside it, in which you can, for example, lay screwdrivers and fix them so that they do not hang out or knock.

It is quite difficult to make a stationary tool box with your own hands. And all because its design is much more complicated than that of a portable one. Inside, you do not need to think over the arrangement of fasteners. The main thing is to form certain compartments and divide them into groups.

A special case is made according to strictly individual needs.. It can, for example, store only drill bits or wrenches of various sizes. Such a box for small tools is more convenient than universal storage. To perform work, sometimes the master needs to take several special cases with him at once. Before proceeding with the manufacture of storage, you need to decide which option is most suitable for the job.

For this you need:

• inventory of available tools;
• sort them into groups;
• distribute by size.

Then it will immediately become clear which box is best made for tools. The article has several instructions that will help solve this problem. First, it is important to choose a material that will be easiest to work with.

Material selection

The hardest thing is to make a tool box out of metal. Such material is not suitable for a portable design - the case will turn out to be too heavy. For stationary models, in which iron keys or heavy component parts will be stored, will do. During work, welding will be required. If you have the skills and ability to use it, you can try. If they are not there, plywood 8-10 mm thick can replace the metal.

It only looks fragile, but it is a very durable material. The parts are fastened together with screws and additionally coated with PVA glue, as they quickly become loose. For the construction of the frame, it is better to use hardwood bars. The walls of the case must be thicker - at least 10 mm. Boxes with cells for carpentry tools are best made from plywood 8 mm thick.

The mobility of stationary plywood boxes will increase markedly if rollers are attached to the bottom, which can be bought at a furniture store.

Boxes for various tools made of wood - carpentry classics. This material allows you to create any models with your own hands.

Case for storing small tools

If you need to have a set of small tools on hand, you can get by with a simple box with a handle. The process of its manufacture must be divided into several stages:

• The first stage is planning, making general calculations, drawing. It should display the order of subsequent actions. The drawing is drawn up independently, or you can use computer programs.
• The second stage is the preparation of the necessary building materials. These are wooden sheets 10-15 mm thick, nails, fasteners. May need to work measuring instruments, hacksaw and hammer.
• The third stage is production. Using the instructions, you can assemble a simple open tool box with your own hands (photo).

Before starting work, you need to make a drawing.

• Number 1 - the walls of the box (two pieces).
• Number 2 - sidewalls (two pieces).
• Number 3 is the bottom of the box.
• Number 4 - a groove made along the thickness of the partition. Its depth should be equal to one third of the thickness of the plywood.

All parts with a hacksaw are cut from plywood blanks. Then the edges of the workpieces are polished with sandpaper. A box is assembled from the largest parts, its sides are coated with PVA glue, then they are additionally fastened with small nails (it makes no sense to use bolt fastening here). The handle-holder (it is also a partition) is made according to the following scheme:

Plywood with a thickness of 5 mm is selected. The hole for the handle is cut with a jigsaw. The workpiece is inserted into the grooves made, which are pre-coated with PVA glue. To prevent the handle from cutting your hand, you need to take a bar with a section of 20x45 mm. The planer rounds the edges of the bar. A slot is made across the entire width, into which a plywood blank is simply inserted. In the end it should look like this.

Along the edges of the plywood handle (this is clearly visible in the photo), wooden slats are attached, in which notches-holders for pliers, pliers, wrenches or screwdriver. The toolbox is ready. So that it does not get dirty, you need to paint it in several layers with wood varnish.

Using the same plywood, you can make a large box with your own hands, which with a slight movement turns into a stable stool. This was invented by craftsmen working with carpentry tools. You can take this drawing as a basis.

These parts need to make four legs measuring 375x50, with bevels at the ends, made at an angle of 15 degrees. And another handle 660 mm long and 40 mm wide. Along the edges - the same bevel. And here is a visual plan of its assembly.

The stool is assembled according to the proposed scheme, the parts are fastened with 4.5x60 mm screws, and not with self-tapping screws. On the finishing stage it turns out here is a box. Make it yourself - simple, as a result - a multifunctional storage for tools. If you turn it over, you get a stable stool.

Small portable option

There is the easiest option for making a box that is suitable for the average homeowner. Outwardly, it will look like in the photo.

A detailed drawing is attached to the model:

Number 1 indicates the sidewall, number 2 - the bottom of the wooden box, number 4 - the handle stand. The handle itself is a bar measuring 382 by 30 mm. Another detail is the holder - a rectangle 118 mm wide and 55 mm long. Three identical holes must be made in the holder. For this, a drill is used. The assembly of a large box begins with the connection of the bottom and sidewall, then the handle stand is mounted. The photo shows all the stages of the upcoming work.

Then the second rack is installed, and at the same time the park-holder is inserted into the blind holes. Then fasteners for screwdrivers are mounted. This is what should end up happening.

Every man will agree that a high-quality and multifunctional tool box is an almost indispensable thing in the household. Many masters prefer to buy a ready-made box in the nearest store, where a wide range is presented. But such a device can be made independently, in accordance with personal wishes. Moreover, the manufacturing process itself is not considered difficult, thanks to which even a beginner can cope with this task.

Classification of tool boxes

There are several main criteria by which multifunctional products can be divided into several main groups.

According to the material from which the case is made:

By type of stored instruments:

Construction of modern boxes

Speaking about the design of such boxes, we mean not their shape, but the way of opening and the presence of auxiliary sections. The following designs are considered standard today:

Making a plywood box

To make a do-it-yourself tool box out of plywood, you will need the following tools and materials:

Before proceeding with manufacturing, you need to carefully work out the design of the future product (the drawing can be made on a computer or on plain paper). Produced necessary calculations, the main dimensions are fixed. Thereafter all marks must be transferred to a sheet of plywood. You can do this with a regular ruler, tape measure, marker or even a pencil. All blanks for the future box are cut along the marked lines. And also it is necessary to mark all the grooves and cut them on the blanks. The irregularities formed during the work can be processed with a chisel. It is thanks to the grooves that the final design of the box will turn out to be stronger and more durable.

The next step is to assemble the entire structure. To glue small parts, use high-quality wood glue. The main sides of the box are also glued together. To improve the result, they need to be pressed tightly against each other. It is best to use a special rubber strip for this. You can not remove it until the glue is completely dry. On the doors you need to round the corners.

A convenient handle for boxing with tools can be made from MDF. Initially, the layout is drawn directly on the wood and only then cut out. When the handle is ready, the surface must be processed. It is attached with carpenter's glue and screws.. If you don’t want to make a handle yourself, then you can buy it at a hardware store. Main criterion right choice- high strength and reliability. Now you need to attach the outer cover of the drawer and the door. All parts are applied in their places, and then the areas for fastening the loops are marked with a pencil.

To organize the order in the box, you can make small compartments. All components are cut out according to the same principle as the box. Grooves are made and glued. On one side of the box, you can make a special compartment for storing screwdrivers. The most convenient option is considered where this function is performed by special inserts with plywood slots. Velcro is attached to the other side of the drawer to store cables and extension cords.

Wooden box manufacturing technology

It is this option that is considered a classic carpentry. Drawings of this portable storage were printed in magazines 50 years ago. For the manufacture of you will need a high-quality board with a thickness of 10 to 20 mm, as well as a hacksaw for wood. Thanks to the simple manufacturing technology, many craftsmen still choose this option.

The classic design does not provide for the presence of separate compartments or special multifunctional devices. The final product will look like a neat deep box with a comfortable handle along the entire length. This shape of the handle has a practical purpose. After all, if the weight of the tools used is unevenly distributed, then you can always find the point of the center of gravity.

A practical addition can be an insert section with its own handle, the height of which occupies 50% of the entire drawer. This insert can be used for small tools(awl, screwdrivers, small keys), as well as consumables (screwdriver bits, electrical tape, drills). For its manufacture, you can use any type of wood.

Universal case made of plastic canister

If you want to make a do-it-yourself tool box, but there is no plywood sheet, then you can use a regular plastic canister. For work you will need:

• Hacksaw.
• Plastic container.
• fasteners.

The canister used must necessarily be rectangular in shape with a comfortable handle, which must be located in the center. In addition, it must be equipped with a screw cap that will be used as a lock.

The process of making a box is quite simple. Using a hacksaw, you need to make cuts in the canister. The first cut should fall on the center of the neck and the handle of the container, it is best to remove the cork and saw through the top wall. The second cut is made exclusively in the horizontal direction. It is best if it is located at the top of the canister, on the end sides. The plastic container itself needs to be sawn from the top wall at a distance of 4 cm, and on the sides by 3 cm.

When all cuts are made, the canister can be opened. To do this, you need to bend all the side parts of the top cover with the halves of the handle. This box can store various materials for fasteners: nails, bolts, screws, nuts. The upper part must be closed by folding the handles together. Such a device is fixed with a screw cap.

To make the box as strong as possible, on the end walls it is necessary to make additional gaps. Small holes are drilled in the lid itself or in the walls, into which hooks are inserted, as well as bolts with nuts.

Metal box for tools

This option is most suitable for experienced locksmiths who have necessary equipment and material. Factory metal tool boxes are made from lighter metals such as aluminium. As a result, the product is as light and durable as possible. But working with aluminum at home is much more difficult.

Even a beginner can make this version of a metal box. After all, the most ordinary box and special partitions will be made of metal. Initially, you need to prepare the main material - galvanized steel (0.4 mm thick). From the tools you need to prepare:

• Marking caliper.
• Metal square.
• Ruler.
• Hammer.
• Pliers.
• File.
• Sharpened core or marker.
• Anvil.

Next is drawing and marking. You need to mark only those places that will later need to be deleted. Now you can start trimming with metal scissors. After trimming everything superfluous, you should get a kind of geometric figure (winged rectangle).

Next, you need to use the anvil. Tapping with a hammer, gradually bend the edges of the workpiece. It is better not to work in a chaotic manner, all actions must be consistent. First, one sidewall is bent, and then another. To wrap protruding parts, pliers are used.

After these manipulations, you need to go over the entire structure with a hammer to align it. In this case, you get a small metal box for storing tools. In the future, you can experiment not only with the sizes, but also with the shapes of such boxes.

Almost every home has one or another tool. When there are too many of them, you can independently make a multifunctional box for storing them. Experienced craftsmen It is believed that such a box is considered an essential attribute for storing various devices. Such boxes can be stored in the workshop and even taken with you on a long journey.

Every man in the house (apartment) must have a screwdriver, a hammer and at least a handful of different nails. If this is a master with "golden" hands, then you need to have a whole set of different tools for which you need a convenient box.

DIY tool box

Many tools (hammer or hacksaw) cannot always be placed in standard tool storage and carrying facilities. Therefore, craftsmen prefer to make with my own hands container of the correct size. Consider the stages of work, how to make a tool box.

Material selection

Can be used: metal or plywood. But wood is considered a classic, which has long been the basis of carpentry. Therefore, it is easier to make a wooden tool box.

Type of shell

You should think in advance and measure where the chest doors and handle options will be located. The design can be open or closed to accommodate large items. It can be a large box with cells or a designer piece of art.

Interior decoration

The model can be simple for storing various little things or multifunctional: a separate row with holes for various screwdrivers, pencils, glue, pliers, etc.

Drawers with several floors are convenient, they can be inserted into each other or pulled out. The main thing is to achieve maximum order in the arrangement of parts, so that there are nails, screws, tape measure, power tools, etc. separately.

In the manufacture of a particular model, it is necessary to take into account the operating conditions:

• storage location (apartment, basement or garage);
• humidity level;
• temperature;
• frequency of use of devices and devices (professional activity or for home use).

Tool box designs

Before buying a compact model for different tools, we list the types of designs:

• The boxes are made of solid durable materials, often rectangular. There are a couple of drawers on the side. Hinged or removable lid with lock. The model is convenient for constant movement.
• A set of boxes is a set of open trays of different sizes that are convenient for the home.
• The case is a compact, durable suitcase, conveniently wide opening, and a handle on the side is a must. Large tools will not fit.
• The organizer is a low container with many cells. Maybe a case or bedside table with cells for small things.
• The tray looks like an open box with recesses, no handle. Not convenient for transportation.
• The bag looks like a sports bag, handles. The model is roomy, but not reliable, and the fabric lets moisture through.
• The backpack is adapted for storing tools, but it is inconvenient to get them.
• The container is a compact closed product with many drawers and sections, some are removable. Transformers are especially convenient.
• The trolley is used in factories, it is a large container on wheels with a comfortable handle. Many sections, easy to move over short distances.

Tool clothes

• This is a vest with pockets where various tools are distributed.
• A belt bag is an indispensable thing when repairing.
• Apron with ties at the neck and belt with pockets.
• Folded storage pouch.

Types of Best Tool Boxes

An important role is played by the material from which the structures for storing and moving various tools are made:

Tool box on wheels

Models made of plastic (metal) with a vertical body with 2 wheels. Convenient handle and lock, the model contains many sections. The only negative is the high price.

Aluminum

Boxes made of aluminum are the most durable and reliable. Popular models of metal boxes for any tools:

• Fit 65610 - aluminum body, equipped with a handle, mobile partitions inside, weight 1.5 kg.
• Dexter is the most compact drawer for small parts.
• Wilton 16910U is a handy aluminum case with steel hinges. Weighs 3 kg, has many pockets on the lid.

car boxes

• Bawer is a universal model, mounted conveniently under the car frame. The car box is strong and reliable, made of galvanized steel, but the weight is 12.4 kg.
• KAMAZ is a simple, reliable metal construction for long-term storage any inventory.
• I-580 is the most convenient model made of polyvinyl chloride (high-impact plastic with 3 types of steel). Weight 35 kg, capacity 90 l, reliable locks, perfectly protected from moisture.

Large capacities

• STANLEY Mobile Job Chest is the most practical, dimensions: 962:600:600 mm, made of thick plastic, amazing capacity.
• StanleyFatMax with the most thoughtful functionality. Lid with latches, inside 3 sections, there is a lower section for large tools. Handles on the sides, wheels make it a popular model.
• Peli 0450 - considered the most mobile: 3 handles and wheels with reverse. Sealed impact-resistant stainless steel case body, volumetric sections, containers are easy to insert into each other. The only problem - big weight and volume.

For balcony

Inexpensive models are suitable for storage on the balcony:

• Fit - the case is ideal for small parts, you can change the size of the cells. Sturdy plastic latch.
• Lot-3 - affordable, inexpensive and compact, there is a pen, colored trays.
• MosPromTara for the home, no sections, but there is a lid.

Organizers are more convenient in use for ease of transfer to any place.

With combination lock

• Brauberg - used to transport valuables. A shockproof case made of steel 8 mm and plastic is made, inside 6 cells.
• Hairway - with the greatest protection (metal with plastic), locks with a code on 2 sides of the model, dimensions: 420x215x330 mm.

metal

• Intertool is a popular drawer with 5 compartments, a secure lock and a comfortable handle.
• STANLEY Expert Cantilever is practical and convenient, 5 folding compartments, protection against finger injuries, comfortable handle, but heavy.

Plastic tool boxes

• StanleyClassic made of impact-resistant plastic, comfortable design.
• Tayg is made with amazing rationality, everything is compactly placed.

Professional

Stanley is reliable and indispensable, corrosion protection, handles are equipped with soft inserts. Removable castings inside, special compartment for drills, etc.

Bosh LT-BOXX - simple in execution, but reliable. The strength of the product provides acrylonitrile butadienstrol.

Photos of the best tool boxes

For quick access to the toolkit, you should properly organize the storage system. An organizer and a tool box help to cope with this. With their own hands they are made from solid wood, plywood, chipboard, various kinds plastic and tin.

The material is selected based on the size of the product and the skills of the carpenter, each has its own advantages and disadvantages.

Home varieties

For stationary storage of tools, open or closed stands and spacious chests of drawers are suitable. In these options, it all depends on their location - a garage or an apartment. In the first case, it is more convenient to organize a stand on the wall the right sizes to keep everything open and free.

For apartments, designs with shelves or plywood drawers, cabinets and even a suitcase are suitable. They can accommodate organizers and cases for power tools and hardware. Small stands can be built on the doors and side walls. The more correctly organized the filling, the longer the order will be maintained.

To accommodate the main set of tools, wrenches, heads, bolts and nuts, a small container with a handle can act as mobile options. With large dimensions, wheels can be screwed to it. Then you should choose the material, calculate the acceptable dimensions, choose the model and type of fasteners, draw up a drawing for the tool box with your own hands or use ready-made offers. After that, you can start manufacturing.

In addition to safety, a do-it-yourself tool box helps with the work. Its sorted content, when each item is in its place, allows you to eventually find everything you need without even looking inside.

The standard placement of a hammer, wrenches and pliers occupies one large compartment. Screwdrivers are inserted into the holes on the horizontal bars.

Classic drawer options

This kind of do-it-yourself tool case is easy to perform. The accessories of the main set lie in sight, each in its place. It is useful for transfer outside the workshop. Tool carriers tend to be heavy, so don't make them too big or made entirely out of planks. Some parts can be replaced with plywood.

open with baffle

Before starting work, make sure that the workpiece material is dry. For the first version you will need the following materials and tools:

• pine boards;
• plywood;
• thermal or PVA glue;
• nails and screws;
• hacksaw, jigsaw or grinder;
• drill or brace and drill for wood;
• hammer;
• chisel;
• tape measure or ruler;
• pencil or marker.

Plywood or cuttings of pine boards are suitable as a material. According to the drawing, markings are made and blanks for the body are cut. Special grooves are cut out in which the partition will stand. To organize them, you will need a milling cutter or a hacksaw with a chisel.

The drawing shows the classic dimensions that are optimal for assembling the box. All blanks are cut according to the scheme, when changing one parameter, it is necessary to proportionally subtract or add from the others:

• transverse walls - 2 pcs.;
• sidewalls - 2 pcs.;
• partition groove.

Sand all prepared elements, assemble a rectangular box. To prevent the structure from falling apart, the attachment points and the ends of the blanks are coated with glue. Additionally, the box is knocked down with small nails or twisted with screws.

In the upper part of the plywood blank, a handle is cut with a hacksaw, jigsaw or grinder. Prepared grooves are lubricated with glue. After that, a partition is installed in them.

From the blocks are made pads for the handle. The corners of the workpieces are processed with a planer and sandpaper, fastened with glue or cloves. From wooden slats cut to the size of the partition, you need to make holders that are placed horizontally on the partition. Suitable holes are drilled for screwdrivers with a drill. Pliers, wire cutters, etc. are placed in rectangular grooves.

The entire structure must be covered with a protective compound. To do this, you can use varnish or paintwork material with special additives.

Organizer in a stool

With this design of the organizer for tools with your own hands, you can carry the tool to the right place and sit on it and reach out to a place that is slightly higher than your height. Materials and tools are the same as in the previous case. Cut out of plywood:

1. Cover 550x380 mm with a cutout in the center 140x40 mm.
2. Longitudinal drawers 470x150x540 mm and a bevel angle of 75 °.
3. Two sidewalls 306x380 mm.
4. The legs and handle are made of bars 385x40x50 mm. At the ends, saw off the bevels at an angle of 15 °.

Assembly is done with screws. Sharp corners are rounded with sandpaper. The product is cleaned of dust and covered with a protective composition.

Type of homemade carrying

If you want to make something more elegant with embossed forms of the side racks, this homemade tool box is just right. First you need to take boards with a thickness of 16 mm. Make parts from them, as in the diagram, and take a round aluminum stick or other metal tube.

Along lines parallel to the edges, holes are drilled on the side walls for self-tapping screws to fasten the structure. With sanding paper or an electric machine, burrs are removed and sharp corners are smoothed out. After that, the prepared parts are assembled: the bottom and sides are fastened with glue and screws.

By the same method, according to the markup, vertical racks, between which the horizontal handle is fixed. Screwdriver holders are screwed with self-tapping screws. The entire surface is cleaned of excess glue and dust.

For protection, the product is varnished or painted. After drying, the box is ready for use.

Hello everybody!

A toolbox today is a very indispensable thing for every owner. Most of us have a lot of different tools that we may not use very often, but nevertheless, we keep them, since not one repair can do without them. In order for the tool to be in one place, and it was convenient to transport it, we use special boxes. Often we just buy them in the nearest store, the range and variety allows us to do this. But why not make it yourself? The manufacturing process is not too complicated, anyone should be able to handle it, especially with a handmade thing, which is much more pleasant to use than a purchased option. This article will describe 4 different ways to make boxes, a photo report is attached.

Let's start making!

Manufacturing Method No. 1

We will need:

Material

Plywood;
- pine board;
- nails;
- wood glue.

Tool

- drill;
- hammer;
- chisel;
- manual frezer;
- ruler;
- pencil;
- roulette.

First of all, you need to find necessary material, plywood or trimming boards are suitable for this. Further, according to the presented drawing, it is necessary to mark up, then cut out all the details of the case. It is necessary to make special grooves into which the partition will be placed, for this we use a manual milling cutter, or another available tool.

The diagram shows the following body parts:

1 - wall (2 pcs.);
2 - sidewall (2 pcs.);
3 - bottom;
4 - groove along the thickness of the partition and a depth of 1/2–1/3 of the thickness of the material

When everything is ready, all elements of the box body should be sanded. Next, we assemble the body together, fix the parts with carpentry glue, and then additionally fasten them with small nails.

Now we make a partition for the box, cut out a special handle, for this we use a jigsaw.

When the partition is ready, grease the grooves with wood glue and install it in its place.

Next, from the planks we make overhead handles, with the help of a planer we round the corners. Then we make tool holders from the rails, use a jigsaw, and a drill. The holes will serve for screwdrivers, and pliers, etc. will be installed in square cutouts. tool.

So that the box does not get dirty, and there is protection from environment, varnish the surface. As a result of the work done, we get such a homemade box.

Manufacturing method No. 2

Drawer-stool

Material

Plywood or OSB;
- wooden beam;
- self-tapping screws;
- wood glue.

Tool

Available cutting tool;
- screwdriver;
- ruler;
- pencil;
- roulette.

We take an existing sheet of plywood, make markings on it, and, according to the dimensions presented, cut out the lid (Fig. 1), then the longitudinal sides (Fig. 2) and sidewalls (Fig. 3).

Next, we take a wooden beam with a section of 40x50 mm, cut out a handle, and 4 legs with bevels at the ends at an angle of 15 °.

Next, we assemble the structure together, using self-tapping screws as fixing elements.

Parts layout:

1 - cover;
2 - tsarga;
3 - handle;
4 - leg;
5 - sidewall.

When everything is ready, using sandpaper or grinder round sharp corners and clean the surface. Next, you can apply a protective coating.

The end result should be such an unusual tool box, which, if necessary, can be transformed into an ordinary stool, for this it is enough to turn it over and put it on legs, with it it will be convenient to reach the place we need, at a time when growth does not allow do it.

Manufacturing method no. 3.

Box for the young master.

Does your child love to craft? We offer to make a small box with him, where he will store his favorite tool.

To make a box with our own hands, we need the following

Material

16 mm boards;
- round wooden beam;
- self-tapping screws;
- wood glue.

Tool

Available cutting tool;
- screwdriver;
- ruler;
- pencil;
- roulette;
- clamps.

First you need to take the existing boards with a cross section of 16 mm, then we make the markup, according to the dimensions provided, after which we cut the wood into the component parts we need.

The drawing shows the following details:

1 - sidewall;
2 - bottom;
3 - handle;
4 - handle stand;
5 - holder.

Using sandpaper, we grind the surface and remove sharp corners. When everything is ready, we begin to connect all the parts together, first you need to connect the bottom and sidewalls, then we put vertical racks along the marked lines and at the same time we put a horizontal handle.

We fix everything with glue and screws. Then we install special holders for screwdrivers.

Now you can paint, choose the color and coating at your discretion.

The toolbox is ready.

Manufacturing Method No. 4

The next version of the tool box is well suited for carrying various and necessary equipment for us, it appearance will differ in solidity and reliability.

To make a box with our own hands, we need the following

Material

The board is not thicker than 12 mm;
- self-tapping screws;
- joiner's glue;
- pen;
- corners 8 pcs.;
- latch 2 pcs.;
- loop 2 pcs.

Tool

Available cutting tool;
- screwdriver;
- ruler;
- pencil;
- roulette;
- clamps.

For the manufacture of the box we use such wood as: pine, linden or poplar. The most optimal thickness of the boards will be a thickness of 12 mm.

Next, we make the markup, according to the indicated dimensions in the drawings, after which we cut it into its component parts, as shown in the photo.

Full list of required parts.

In order to make sure that the wood is cut correctly, you need to put all the parts in a single box.

First, we assemble the bottom part and the lid of the box, for convenience we use clamps and corner clamps. We fix the parts together with carpentry glue.

Then, using a drill, we drill a hole for the self-tapping screws, we drill the holes.