How to cut out tires. Crafts from tires for the garden with your own hands, master class. Crafts from tires - Project for the improvement of the walking area in the middle group "Creating flower beds"

Used car tires do not need to be thrown away. After using them for their intended purpose, you can use tires to decorate the yard or garden plot. More interesting ideas can be seen in others, but why not try to do the same near your home? After all, the process of making many crafts is very simple.
Giraffe
For this interesting figure, you need to dig one large tire into the ground, up to the middle of the circle. In front, fix the high with self-tapping screws round log. On it you need to fix the muzzle - a small frame of a tree. Eyes and ears can be cut from plastic bottle or a piece of linoleum. It remains only to paint everything yellow and make brown spots.

Zebra
This figure is made in exactly the same way as a giraffe, only the paint needs white and black.

Elephant
To make one, you need 2 tires of the same size. Fix them together with self-tapping screws and attach to the board (base). The elephant's head is a 10-liter plastic canister, the ears are ovals from the same canister. The trunk is a piece of the old corrugated pipe, eyes - canister lids. Eyelashes can be cut from a plastic bottle. Better color the elephant in grey colour, or you can turn it into a cartoonish orange hero.

bear
This figure is obtained from two tires of different sizes, interconnected. The big tire is the torso, and the small one is the head. To make the design more stable, the tires can be put on a thin metal rod. Ears are cut out of plastic or linoleum. Hardboard can be used to close the circles in the middle of the tires. If desired, the figure can also be cut out of paws from linoleum. After painting, the bear becomes an attractive decorative decoration of the garden.

Matryoshka
Original Russian toy - matryoshka. It can also be made from bus tires. A total of 7 tires are required. Five of them are attached to one another in a horizontal position - this is the torso. For greater fixation, a tall log dug into the ground can be placed inside. A tire is attached vertically to the edge of this log - this is the head, hollow holes are closed with hardboard circles. On the sides you can place hands from a tire cut in half. After that, everything needs to be painted with bright colors and depict a face. It turns out an interesting lady-madame.

Mickey Mouse
You can make two cartoon characters: a boy and a girl. Each character needs 4 tires. Two bearings are laid on the ground in a horizontal position, two tires in the shape of a figure eight are attached to them. The emphasis of the entire structure is on the tree. Mickey Mouse's ears are made from plastic bucket lids, and his arms are made from cut pieces. plastic pipes. Bows, skirt, palms and muzzles must be cut out of linoleum. The lower tires are filled with fertile soil and can be used as mini-flower beds.
After painting, the characters look just great and attractive!

You can decorate a summer cottage or just a courtyard near the house with ordinary old wheels, and many craftsmen make real masterpieces with their own hands! Indeed, in our country, the recycling of used tires is not at the highest level, and we can see a lot of tires thrown right into the street. But you can combine business with pleasure and create crafts - decorations for suburban area, garden, vegetable garden with their own hands. Let's see a selection of photo crafts from a tire:

Using tires in the garden

With the help of paint and imagination, you can create your own and real work of art. There can be a lot of options for the performance of flower girls, we will consider the master classes themselves in the following articles, and now let's look at the southern exotic - a palm tree:

Do-it-yourself palm tree from tires

Crafts on the theme of southern holidays are very popular with us, we have already published an article that described in detail its manufacture. In addition to exotic plants, you can also create African predators:

Tire crocodiles

Decorate your garden with tire crocodiles

Such animals can not only arouse admiration, but also scare away unwanted guests ... They are really made very beautifully and believably.

Elephant from old tire and cameras in the garden

A colorful blue elephant, all from the same southern African countries, will look very good on the playground. Here are a couple more examples of these wonderful inhabitants of Africa:

Having made the correct coloring of the tire, you can create your own zoo from a variety of animals from around the world. And for this you need only: desire, a few tires and a little imagination. Here, at someone's house, a tire was turned into snails and a black and white zebra:

Snails and Zebra: tire crafts for the garden

To decorate the garden, you can come up with bizarre birds, for example, a parrot can be a good home for flowers:

Parrot and swans: homemade from an old tire

For bird lovers, you can make these funny crafts:

Birds - crafts from tires for a country garden

The pet birds turned out very wonderful, they don’t even look so impressive!

Tire Turtles

"Auto" turtle from used car tires

Tire turtles

How about a good cup of tea?? You can also make a “tea set” to decorate a flower garden, it will be difficult to pick up such a cup, but it looks great!

Patio Tire Crafts

For a full-fledged tea set for these cups, you need good garden furniture, here are just the right samples from the tire:

Old tire as furniture

The furniture turned out to be really original, though it cannot bear the weight of a person by itself, so the frame must be made of a metal structure.

Playground decorations using a tire

Fabulous animals can decorate both their playground and the territory near the house. Few people can walk past them without a smile, and children will be most interested in such figures.

funny horses

Horses from car tires

These helpers in the garden will help to transport something, or simply carry a flower bed with their carts.

Garden Crafts

basket - flower garden for the garden

Well, at the end of our photo collection, let's watch a video in which I also use tires for needlework and which will be a good addition:

DIY tire crafts

That's all, we hope you liked the photo selection of crafts from tires and tires do it yourself, see you on our pages!

How can you further improve the area adjacent to the house? The acquisition of decorative landscape elements is not affordable for everyone.

However, don't worry: the territory will be able to give an unusual look and at minimal cost. One of the ways to independently ennoble the site are garden figures from car tires. Used tires are available for free at most services. The only resource required for in large numbers, there will be time.

At first glance, it seems that it will not work to achieve an interesting result, but the examples below are able to defeat the pessimistic attitude.

Original ideas for creating crafts from tires

Tires are the right material for the most interesting ideas. Due to the fact that you don’t feel sorry for them, you can implement your ideas for an unlimited number of attempts, after which you will definitely get funny country crafts from car tires. What kind of non-trivial constructions can be made?

Idea one: unusual flower beds made of tires

As a rule, the owners of dachas are concerned only with the functional side of these structures, so the flower flower bed from the old tire is not made out in any way. Such a decision looks faded and uninteresting. With a little effort, these products can be significantly transformed: you can make any image or object out of old tires with your own hands.

To create an interesting combination, you will need paint, a large knife, wire and a little imagination. Two flower beds can be placed opposite each other, depicting tea pairs. To implement the idea, you need 4 tires. To make the flower beds in the form of cups, rubber of a smaller radius will be used in the lower tiers, and larger tires in the upper tiers.

Additional elements of the composition can be made from the outer sidewalls of large tires. These pieces are enough to create a saucer-like rim at the base of a smaller diameter tire and handles for cups. It is desirable to fasten all parts of the structure with a wire.

It is better to color the resulting cups and saucers in bright colours. If the house has an interesting service, an enlarged copy of it on the site will be an excellent solution. The result is an attractive flowerbed of tires.

In addition to this composition, you can organize other unusual solutions: hanging tires with a plywood base nailed to a tree or folding them into interesting geometric shapes.

Flowerbed of tires. Video

Step-by-step photo of making a flower bed from a tire

Idea two: tire figures on the site

Although these elements do not carry a functional load, they will give the cottage soulfulness. The hosts, guests and, most importantly, the children will definitely smile at the sight of garden figurines from tires.

Inspiration for their creation can be drawn from cartoons, fairy tales and legends. They represent an inexhaustible source of fantasy. With a simple tool and available materials you can create characters such as the fabulous frog, the swan princess or the steadfast tin soldier.

By cutting the tires in half and connecting them in the form of waves, you can get the Serpent Gorynych. However, for a better similarity, you need to work. From the finely chopped parts of the tires, it will be possible to create scales and the head of this monster.

For greater resemblance to the original, it is better to attach additional elements from improvised materials to the figures.

Idea three: country furniture

You can not get around the option to make comfortable furnishings from tires. Inside the house, tables, chairs, chairs, the basis of which is rubber, upholstered on the outside with materials of different textures and colors, will look interesting.

The simplest things like ottoman, can be made from old tires with your own hands, spending less than an hour on the process. The upholstery will be attached to each other inside the tire. You can also use plywood sheets screwed to the sidewall of the tire with a screwdriver.

The only important parameter is the state cord. If it sticks out, then it is better to use another tire, since it will be uncomfortable to sit on such a pouffe.

Video: summer cottage furniture from car tires

Step by step photos of making a puff from a tire

Idea four: tire swing

Nothing can make children more excited than swing. The place where they are installed inevitably becomes the center of attraction for the attention of all household members. By using tires to build a swing, you can significantly save on costs and provide better safety for the little family members.

If there is a large tree on the site, then making this structure will not be difficult. For stability, the branch must be parallel to the ground and be ready for loads. From the tools you will need a jigsaw and a knife. And in addition to the tire, you will need to find a strong rope or chain. If the latter is used, then you will additionally need carabiners for attaching the tire.

In the case of using a rope, the procedure will be as follows:

1. A loop is tied on the rope, after which it is thrown over the branch;
2. The free end is inserted into the loop and tightened. Be sure to check the reliability of the node;
3. The lower end of the rope is threaded through the tire with the tread up;
4. After adjusting the comfortable height, tightening the knot at the tire and checking the strength of the connections, it will be possible to use the swing.

If children are still very young, it is recommended that they use the facility under the supervision of adults.

How to make a tire swing: video

There are also more non-trivial tire swing designs in the country. From tires, you can cut a swing of the most unusual shape, reminiscent of animals or fairy-tale characters.

Fifth idea: country paths from tires

One of the most popular ways to "reincarnate" a tire that has fallen into disrepair is the creation of tracks in the country. This method of use allows you to maintain cleanliness in a country house even under the most adverse weather conditions.

Compared to concreting, this option is not associated with huge costs. Another advantage of a track made of old tires is that it does not sink into the ground like gravel and will last a long time.

For fast work It is better to choose tires with the largest possible diameter. Such blanks will significantly reduce the time spent on the manufacture of tracks.

In addition to tires, you will need wide boards, as well as screws or nails. From the tool you will need to prepare a large sharp knife, screwdriver or hammer.

The technology itself is not complex and consists of the following steps:

1. Rubber preparation. Using a knife, the sidewalls of the tires must be removed. The rest is cut across the tread. The result should be a rubber strip. In this way, you need to prepare required amount material;
2. Attaching rubber to wood. Using a hammer and nails, or a screwdriver and self-tapping screws, the existing strips are attached over the wooden base of the future track.
3. Soil preparation. If there has been no precipitation for a long time, it will be necessary to fill the ground with water under the places where the boards are laid. The condition of the soil should ensure that the boards do not go into the ground;
4. Stacking elements. The placement of parts of the track must be approached responsibly. In order for the structure to last for a long time, you will need to carefully compact each part of it.

To give tire garden paths a more fun look, rubber can be pre-painted. At the same time, it is important that the coating is not slippery in winter or during rainfall. Otherwise, there is a risk of injury.

A great idea is to make overlays for country stairs from old tires with your own hands. This will give a more aesthetic appearance old steps and prevent the risk of slipping.

The most popular ways to give a second life to old tires

There are really a huge number of ideas for the creative use of tires. However, there are a number of crafts and structures that are most often found in the dachas of compatriots. What is the most popular choice?

Swimming pool from an old tire

An interesting option is swimming pool from an old tire. For such a structure, you will need to look for a large tire used on a large tractor or special equipment.

Preparing a pool is not difficult. The work will consist in attaching a material to the tire, which forms an airtight bottom, resting on a dense surface.

To work, you will need the following materials and tools:

• Waterproof material;
• Glue for rubber;
• degreasing agent;
• Putty-sealant;
• Scissors.

Since the bottom of the pool will consist of a thin material, you should choose an installation site in advance, in which there will be no sharp stones, branches and other objects that can damage the bottom or cause injury. On the other hand, this area should not be soft. Otherwise, the glued material will probably come off at the seam.

At the first stage, it will be necessary to prepare the surfaces of the elements to be glued, in the place of their future contact. To do this, you need to clean them of fat using any suitable tool.

Next, the cleaned surfaces are lubricated glue and connect. At the same time, you should not feel sorry for him, since the excess can be removed, and if there is a shortage, the pool may leak. When the glue sets, you will need to turn the wheel over so that the seam is under pressure.

A day later, the contact point from the inside of the pool is processed with amaze-sealant. After an additional 24 hours, it will be possible to pour water inside and enjoy swimming in hot weather.

Do-it-yourself tire swan

This bird is one of the most common country figures. Having shown sufficient perseverance, you can upholster an interesting result. For work, one car tire, thick wire, two small clamps supporting the swan's neck, as well as white and red paint will be enough.

As a tool, you will need a jigsaw with the ability to cut metal threads, as well as a marker. To protect the eyes and body from the ingress of sawdust formed when cutting the cord, it is better to use tight clothing and work glasses.

The work will consist of the following parts:

1. Training tires for cutting. With the help of a marker on one of the sidewalls of the tire, two semicircles are drawn in the center, the upper of which will serve as a blank for the tail and head;
2. cutting. It is carried out along the marked line while preparing the head and neck. The tail is cut in the shape of a triangle in the upper part of the sidewall, the sides of which go away from the tread. On the sides, between the tread and the drawn lines, three cuts are made for the wings.
3. Formation. In places of side cuts, parts of the tires turn outward, forming wings. The tail is bent in the same way. The wire is attached with two clamps to a long rubber strip at the base and at the top.
4. Painting. The main part of the figurine is covered with white, and the beak will be red.

The result should be a swan that can be used as a flower bed. In addition to this option, there are other ways to make this figure.

Video instruction on how to make a swan from a tire

Other interesting tire installations

If, as a result of a raid by rodents or winter cold had to cut the branches garden trees, you can correct the situation by temporarily making a palm tree from an old tire. To do this, you need treads separated from the tires, which can be shaped into tropical leaves. The surprise of the neighbors will be guaranteed!

Separated from the sidewalls, the protectors, painted in green, are very reminiscent of a crocodile. The image of reptiles can be supplemented with an open mouth, for which it is possible to characteristically fix sections of the tread. Triangular teeth should be cut out of small fragments of rubber and painted in light color and attach to the crocodile.

It will be easy to make an elephant. Enough even one tire. Half of it forms the body, and the protector of the other part will become the trunk. From the sides you get excellent ears. For tusks, you can use the landing elements of the tire.

Turtle figures are also very popular. It is enough to attach 4 small tread elements imitating paws to a lying car tire, and the same parts for the head and tail. After coloring, you will get an interesting flower bed, resembling a creature that is in no hurry.

Photo of country crafts from tires

Tires standing in a row, cut in half, serve as a very convenient bike parking. Elastic rubber will hold the wheel of any size.

If a old tire located on the disk, you do not need to unmount it. After a short work with a jigsaw, the wheel will become a reliable stand for an unusual flowerpot.

Aggressive piranha, attached to a stalk in the middle of the garden, will scare away thrushes and other arrogant lovers of country plantings.

A donkey moving a flower bed on wheels serves as a very non-trivial dacha installation that any guest of a country house will appreciate.

If there is a swing for people, then why not make a swing for flowers. Suddenly they start to bloom better!

The swans are already there. Apparently there will be a lake soon!

The pink flamingo is sure to become a favorite of all the little household members.

Crocodile from an old tire

With a little free time and unnecessary tires left, you can easily create crafts from car tires for the playground with your own hands. We will provide you with ready-made ideas, photos and diagrams that clearly show how to cut and make toys and products for kids. Usually, in the territory of the post-Soviet countries, tires are used to protect school and kindergarten territories, courtyard flower beds. We offer several fun options for crafts that will decorate the playing area and bring the kids to complete delight!

Variants of children's crafts from old car tires.

Sandboxes

One of the most common and easy crafts to make is a children's sandbox. To create it, you can use either one large tractor tire (convenient for one child under 5 years old), or several tires from a car.

To make a sandbox, you will need the following materials:

• Tires (one or more).
• insulating material.
• Spray cans with waterproof paints of the desired shades.
• Washed sand.
• Shovel.

It is convenient to make a sandbox for one kid from one big tire. To protect from the sun, you can install an umbrella in the center.

Step by step process:

1. It is necessary to dig a recess along the diameter of the future sandbox. It will help to fix the tire and reduce its height if you are using a large tractor tire.
2. At the bottom of the recess you need to lay insulating material. Its use will allow the sand not to mix with the ground, prevent the germination of weeds and the ingress of insects into the sand from the ground.
3. The tire must be washed and covered with paints for outdoor use.
4. Next, it remains to install the tire in the recess and fill it with sand.

If several small tires are used to create a sandbox, they will first need to be cut with a jigsaw and laid in the selected shape.

In such a large sandbox-flower, it will be convenient for several kids to play.

Multi-tire flower sandbox - convenient option for several kids.

Swing

Another popular craft, so beloved by all kids, is the swing. There are several options for how to make them.

Option 1

For the manufacture of hanging swing this type will require a reliable support in the form of a structure made of wooden beams or a metal frame. The tires must be cut into two parts, painted and tied with a strong cable to the support at the two edges.

Hanging swing on a metal support.

Option 2

The next version of the hanging swing is more suitable for older children. They are made as simply as possible - a strong rope is attached to the tires placed horizontally or vertically by a metal hook and suspended from a support. Usually a strong branch of a tree acts as a support.

For the manufacture of swings, it is important to choose undamaged, durable tires that can easily withstand the load when riding.

Hanging swing from whole tires.

Rocking chair-balancer

Another favorite type of swing for children is the swing-balancer. And tires are suitable for their manufacture as well as possible. Usually balancers are created in the form of horses, but you should not be limited to any shape or color.

A bright balance beam with jumpers for riding two kids.

Such a balance horse is suitable as a toy and decor for a playground, but if you remove the wooden base, the horse can be used for riding.

Horse balancer.

If you attach a steering wheel from an unnecessary bicycle to the balancer, you get a great toy for a child, which will be comfortable to hold on to while riding.

Balancer, stylized as a bicycle.

Vehicles

Crafts from cars, tractors and trucks for the playground will delight the kids! Products can be of varying complexity depending on the skills of the master.

Machine made of wheels and a plastic seat.

Figures of animals and characters

Making figures of animals and characters is another original idea use of tires in the playground. Obviously, kids will not be able to play with such products, but they will organically fit into the exterior of the playing area and will definitely cheer up both children and adults.

Snowman from car tires.

Arrangement of a sports and playground

A children's playground can be completely made of tires. In addition to the elements already listed (ordinary swings and balance beams, sandboxes, figures), various obstacle courses, transitions, and climbing elements can be made from unnecessary car tires.

1. The snail train can serve as a bench or a climbing simulator for the little ones.



A simple walker in the form of a snail for the little ones.

2. The walker in the photo below is already more complicated in design, therefore it can be used by school-age children. Manufacturing is as simple as possible: vertical supports you need to attach the halves of the tires with screws.



A walker of a more complex design in the form of steps to a slide.

3. For many elements of the nursery playground The tires don't even have to be cut. It will be enough to securely attach them to metal or wooden supports.



Climbing element of their tires and pipes.

4. The next climbing element is created very simply from painted wheels, metal supports and planks.



Option for manufacturing a climbing element.

5. From car tires, you can build a kind of simulator if you attach them one by one using ropes (metal chains) to a wooden support.



Tire walking and balance trainer.

Thus, if you have several old tires stale, do not rush to get rid of them - you can make tires from tires with your own hands in just a couple of hours original crafts for the playground, and according to our diagrams and photos, you can easily understand how to cut and assemble original products for the playground.

You can find more craft ideas from old car tires in the following video: