Well, a very simple and interesting pouffe from an old tire. How to make an ottoman out of tires How to make a ottoman out of a tire

Hello dear readers! Even from the simplest materials at hand, if desired, you can create incredibly attractive things. In today's review, we will talk about old, unexploited car tires, or rather, we will tell you what to make from tires. There are actually a lot of variations in the use of such tires, it can be swings, chairs, ottomans, garden decorations, flower beds, fences, and much more, details below.

What can be made from tires.

1. Border.

A classic of the genre, traditionally old tires separate the area from the path to the flower bed or lawn. Cut the tire in half and bury the cut part in the ground. Such borders, if desired, can be painted in any shade or by showing a creative approach - draw flowers, cars, etc.

2. Newspaper.

By cutting the tire in half and installing it on metal legs, you can get a rather interesting newspaper or magazine rack (whoever is closer).

3. Fence.

A great idea for a fence - tires stacked on top of each other, sprinkled with earth with planted weaving plants.

4. Swing.

Children will be indescribably delighted with such a wonderful swing. The horse from the tire looks especially impressive (see photo below).

5. Rocking chair.

By cutting the tire in half and nailing a flat plank to the cut off part, you can end up with an excellent outdoor rocking chair for a child. But it can also be painted in the child’s favorite shade, and then he will spend a lot of time on it.

6. Flowerbed.

The next way to use tires, just like the curb is considered a “classic”, you must admit, flowerbeds from old tires catch your eye everywhere - in small towns, sleeping areas, villages, kindergartens, playgrounds etc. You can explore below various options flower beds.

7. Bird feeder.

A wheel on a rope tied to a tree branch filled with food will serve as an excellent bird feeder.

8. Armchair.

But you can make a great chair out of tires, various variations of chairs can be studied in the photographs below.

9. Chandelier.

The imagination of designers is really limitless - you can even make a ceiling chandelier out of tires.

10. Rack for bicycles.

Tires cut in half, dug into a row at a distance of about 8 cm from each other, will serve as an excellent rack for bicycles.

11. Place for the dog.

The round pillow laid inside the tire will serve as an ideal sleeping place for your pet - a cat or a dog.

12. Trash can.

The simplest idea to implement is three or four tires stacked on top of each other, inside a large garbage bag, and in the end a great trash can. Painted wheels will look more interesting and neat.

13. Wall flower bed.

Tires screwed with a screwdriver to wooden wall will serve as excellent wall beds.

14. Palm tree.

First you need to flatten the tire by cutting it with a jigsaw, then use a pencil to draw the outlines of palm leaves, which are again cut out with a jigsaw, and paint them green. The resulting leaves are nailed to the trunks of obsolete trees.

15. Sandbox.

The simplest idea to implement is the creation of a sandbox. Pour sand into a large tire to the top, install a beach umbrella in the center. At night, remove the umbrella and cover the sandbox with an awning, and so that it does not fly away when the wind blows, screw screws along the edges of the tire, and create loops on the tent itself.

16. Hanging flower bed.

Look how gorgeous the hanging flower bed in the form of a parrot looks. The tire is cut with a jigsaw, and according to preliminary marks it is painted with facade paint.

17. Stand for umbrellas.

Holes are cut out in the tire along the width of the folded umbrella, you can try to take large curtain eyelets and fix them on the tire. To prevent the tire from rolling around the room, attach wooden legs to it.

18. Pond.

Great idea for a garden pond. A hole is dug to the size of the tire, the latter is covered with a dense film, a hose with water is lowered inside. Along the edges, the tire is masked by all kinds of flat stones, moisture-loving plants are planted. At the end, the pond is filled with water. The whole process of creating such a pond can be studied in the photo below.

19. Ottoman.

An ottoman made of a tire decorated with a rope looks very stylish. Plywood is nailed to the surface of the tire according to the size of the tire itself, then a rope is taken and glued to the sides and top of the future ottoman with glue. The whole process of creating an ottoman is shown in the photo below.

20. Washbasin.

And how do you like this washbasin, very original, isn't it.

21. Garden steps.

Sometimes the site is not on a flat surface, but goes down a slope, so in order not to bother with concreting, you can use unnecessary tires by digging them along a steep slope, forming steps.

22. Table.

The miniature table is very beautiful. And how to make it yourself, you can find out by examining the photo below.

23. Decorations for flower beds.

Craftsmen make really chic garden decorations from old tires, including: swans, ladybugs, cows, frogs, tea mugs, etc.

How to make a tire fountain:

How to make a swan out of a tire:

How to make an ottoman from a tire:

Today we showed you a lot of ideas on what can be made from tires. For a garden, a more practical and malleable material is hard to find, and what magnificent garden elements are obtained - a feast for the eyes! The conclusion is simple, given suburban area– Worn-out tires should not be thrown away!

Friends, we remind you that on our website "" you can subscribe to receive notifications of the release the latest reviews, the subscription form is located in the sidebar.

The interior is a useful, beautiful and functional thing. With it it is much more convenient to put on shoes when leaving the apartment, it can be used as an additional seat, children can jump and play on it.

Also, ottomans are often used as decorative elements.. They are distinguished by bright colors, interesting shapes and various designs. Making a pouffe out of tires with your own hands is quite possible even for a beginner - the main thing is not to be afraid and show creative ingenuity!

Handmade furniture always looks original and aesthetically pleasing. She is able to fill the house with a special atmosphere of warmth and comfort. To the main benefits self-manufacturing an ottoman from old tires should be attributed:

On such an ottoman it will be comfortable and convenient to sit. Since the tires themselves are different:

• firmness and elasticity;
• resistance to mechanical damage;
• ability to withstand heavy loads.

Important: the only disadvantage of tires is that when heated, they emit harmful substances. But for home furniture, it does not matter, as the ottomans will not heat up in the sun.

Manufacturing master class

There are several different options production of padded stools from tires.

Without side trim

According to this pattern, a low pouffe is made from one tire. If you want to make the product taller, you need to connect two tires together. To make such a piece of furniture, you will need the following tools:

From the materials you will need to prepare:

• two tires;
• foam rubber;
• upholstery fabric;
• belt;
• plywood. It is better to take lumber, at least 3-5 mm thick.

The process of manufacturing and assembling the product will look like this::

Concerning decorative finishes, the tires can be painted in any color.

How to do with twine?

To make it, you will need the following tools:

The process of making a puff from tires will be carried out in the following sequence:

The final touches are the coating of the twine with a colorless varnish.

Advice: the varnish is applied to the product only after the glue has completely hardened. It is better to apply varnish in two or three layers. This will facilitate the operation and maintenance of furniture.

This option for making an ottoman from tires will look great in eco-style rooms..

Soft

This option for making a pouffe is simple and convenient. For its manufacture you will need:

The pouffe is made as follows:

1. We take two wheels and connect them together with self-tapping screws.
2. Two rectangles are cut out of foam rubber. Their size should be such that it is convenient for you to wrap the wheels with them. The edges of the foam are sewn together. This will make the frame of the product soft and comfortable to use.
3. A dense fabric is stretched over the upper part of the product, and a pre-cut circle of foam rubber is placed on top. From above it is sheathed with upholstery material.
4. After that, we move on to decorating the sidewalls. They are sheathed with fabric using a strong thread.

You can decorate the product with lace or any other decorative elements..

Idea: so that a piece of furniture can easily move around the room, you can make handles for it from an old belt. To do this, two loops are made from the belt and screwed on the sides with screws. Also, wheels can be screwed to the bottom of the piece of furniture.

A photo

If you are not afraid to work with tires, you will get furniture that is amazing in beauty and functionality:

Useful video

A detailed process of making an ottoman with trim can be seen in the following video:

Conclusion

In conclusion, it is worth noting that almost everyone can make an ottoman from old tires. This process is not difficult. As a result, you will get a stylish and practical piece of furniture that will harmoniously fit into any design and become its main decoration.

In contact with

Needs arrangement and decoration not only Vacation home and a summer cottage, but also a garage or a garden gazebo. You can decorate a garden gazebo with various interior items. It is interesting to decorate the garage with items that you make with your own hands.

Necessary tools for creating an ottoman from a tire: Drill, plywood, glue and varnish, scissors, brush, rope.

These items will become truly original and exclusive solutions for arranging a garage or gazebo. You can apply all your imagination and creative ideas to their creation. One of these items can be an ottoman from a tire. You can make it with your own hands, then the design will turn out to be original and stylish. The following are 2 ways to independently manufacture this product.

Materials and tools:

• used car tire;
• twine;
• plywood;
• self-tapping screws;
• glue gun;

Back to index

Step by step work

How to do? A used car tire is suitable for crafting this item. You need to take twine, any other kind of rope or a small rope. It is necessary to cut 2 circles from plywood according to the size of the tire.

Then put the plywood on top and bottom on the surface of the tire. Then fasten the plywood sheets to the tire with self-tapping screws. Next, using a glue gun, glue the twine to the plywood sheet.

In this case, the work must be performed sequentially, pressing each turn to the turn and rotating in a circle, starting from the center, using the snail principle.

In the same way, they continue to lay the twine further, gradually move to the end of the tire and glue it until the entire tire is closed.

For the manufacture of an ottoman, it is best to use a hemp rope. It looks attractive, is not afraid of the sun, and is environmentally friendly. After gluing to the tire, you can varnish the rope.

This will protect the ottoman from moisture and adverse weather conditions. Thus, you can get a great design solution. The design of the ottoman is beautiful and economical. The ottoman can be placed in the garage, gazebo or on the veranda.

Back to index

Second production method

It is not necessary to sheathe the ottoman from the outside - just put an old pillow inside.

Materials and tools:

• used car tires;
• foam rubber;
• dense fabric or mesh;
• fabric for decoration;
• fringe, lace;
• strong threads, needles;
• sewing machine;
• self-tapping screws.

We make a pouffe with our own hands. First you need to prepare the tires. If tires were previously used for a car, you must first rinse them with water, use a brush and washing powder to remove dust and clay residues.

Nadi to make an ottoman having the height of an ordinary stool. To do this, put 2 tires (one on top of the other) and connect them with electrical tape.

You can fasten the tires one to the other with self-tapping screws along their inner surface. The wheels must be firmly connected to each other, thus creating a sufficiently strong frame for the product.

We do the seat. It is necessary to measure the diameter of the tire hole and cut a circle of the same diameter from the foam rubber. On the sides, the frame of the future product must be sheathed with foam rubber, then the ottoman will become soft and will have a streamlined shape.

To do this, cut a rectangle out of foam rubber. One side of the rectangle is equal to the height of the frame of the product, the second side is equal to the circumference of the frame. It is necessary to wrap the frame with foam rubber and sew its ends with a strong thread.

Then close the hole with foam rubber. To do this, you first need to sew up the upper and lower holes with a strong cloth or a special mesh, then we attach the foam rubber on top of it.

The final stage is the creation of the upholstery. To do this, it is better to use dense furniture fabric. Cut a rectangle out of this fabric. Its short side is equal to the height of the walls of the ottoman plus a turning width of 10 cm on each side.

The long side of the ottoman is equal to the outer diameter of the wheel plus one cm per stitch. Sew 2 short sides of the fabric upholstery and stretch it over the wheels. The line is best done on sewing machine. The seam is better to do double.

The frame of the product is covered with fabric. Now you need to finish and fasten the upper and lower parts of the model together. Using a strong thread and a needle on the inside of the wheels, we fasten the structure. To do this, thread the thread from the top edge, then pull it inside and pull it out from the bottom edge.

The fabric is stretched. After full firmware, you can put a soft pillow on top. The decoration can be supplemented with fringe, appliqué, embroidery, lace. When creating a model design, use all your imagination and creativity.

Handmade things are always treated with special love. After all, the soul is invested in them, individual design developments are embodied. Often such things become the main attraction of the house.

Currently, do-it-yourself lovers often use used car tires as a source material. In summer cottages from this material you can see flower beds, swings, washbasins, garden decorations, and, of course, furniture. All these products fit perfectly into the country landscape, are very economical, but, most importantly, they are made by hand.

This does not require special skills, materials and tools. All that is needed is ingenuity, imagination and non-standard solutions. Therefore, the manufacture of furniture from tires is an inexhaustible storehouse for the creativity of every craftsman.

What materials and tools will be required

To make a pouffe from a car tire, you need the following tools:

• electric jigsaw;
• screwdriver;
• furniture stapler;
• glue gun;
• scissors;
• pencil;
• brush.

From the materials you will need:

• plywood 10-12mm thick or chipboard;
• furniture wheels or legs;
• foam rubber;
• fabric or leatherette;
• thick rope;
• self-tapping screws;
• colorless varnish.

The production process of the ottoman is divided into three parts:

1. Making the bottom.
2. Seat manufacturing.
3. Side work.

Attention! Before starting work with a tire, it must be thoroughly washed and dried.

Initially, you need to determine the place where the ottoman will stand. If it's open summer cottage, then additional elements can not be installed on the lower part. It is quite stable and is not affected by climatic precipitation. If you plan to use the ottoman on the veranda, in the gazebo or country house, then you need to make a bottom. To do this, on plywood or chipboard, you need to draw a circle, the diameter of which is equal to the outer diameter of the tire, and cut it out with a jigsaw.

Attention! In order for the bottom to be more durable and not exposed to moisture, it must be painted in two layers with furniture varnish or oil paint.

Then, using a screwdriver, legs or furniture wheels are attached to the bottom. On the tire, the bottom is fixed with self-tapping screws. The presence of the lower part also allows you to store things inside this furniture.

To make a seat, on plywood or chipboard, you need to draw a circle, the diameter of which is two centimeters larger than the inner diameter of the tire, and cut it out with a jigsaw. Then lay this blank on the foam rubber and draw a line along the edge of the circle with a pencil. Cut the foam along the line with a knife.

Lay out the fabric on the table, on which the cut out circles of foam rubber and plywood are laid. The fabric is stretched and fixed around the perimeter on plywood with a furniture stapler. Once completed, the excess fabric is trimmed with scissors.

Attention! If the ottoman will not stand under a canopy, then it is better to use raincoat fabric so that it does not get wet.

Works with a side part are the most creative. Their task is to give the ottoman a unique design look.

1. The easiest option is to paint. It can be a solid color, pattern or ornament.
2. You can also use fabric or leatherette for decoration. A piece of such material is superimposed on the side part and the place of its connection is marked. Then, on a sewing machine, a seam is made along the mark to make a cylinder. The resulting blank is put on the tire and refueled under the bottom and seat.
3. A very interesting type of ottoman is obtained when finishing with a thick rope. To do this, glue is applied to the tire around the perimeter of the seat, with which the rope is fixed. It is applied in dense layers over the entire surface. For strength, the rope is covered with a colorless varnish.

If the ottoman from one tire is not very convenient in height, then two or three blanks can be used, which are fastened together with self-tapping screws or bolts.

This article contains instructions for making an ottoman from a car tire and some options. design solutions, which will help everyone to independently make similar furniture for a summer residence and unleash their creative potential.

Good afternoon, dear subscribers building portal- website. With this lesson we continue step by step guides aimed at improving the suburban area, as well as its design. Today we will analyze how to make an ottoman from tires with your own hands.

Tools needed to create an ottoman

Step-by-step instruction

1. First of all, we cut a sheet of our plywood based on the contour of our tire and make a sheet round shape, after that we drill holes in the tire and plywood to fix and connect the tire and plywood.

   

2. Further, using self-tapping screws or bolts, but keep in mind that when fastening the elements with bolts, you will need to make holes for the bolt heads so that they do not protrude from under the plywood covers. We fasten the plywood sheet to the tire.

   

   By the way, please note that the plywood sheet is attached on both sides, because. we will attach roller legs to the bottom of our ottoman, which will move our ottoman on wheels.

3. We begin to glue our twine to the tire, you need to start from the middle and lay the twine in the shape of a snail, which contributes to a rather beautiful pattern.

   

4. You need to glue on strong glue, we recommend using glue in a special gun, but if you don’t have such a tool, then glue will do - “Moment”, but note that it must be very sticky!

   

5. Further, when the cover of our ottoman is glued with twine, we begin to glue the twine directly onto the tire itself.

   

6. In order for the rope to fit better on the tire, we need to turn the tire from top to bottom, which will make it easier to attach the rope.

   

7. Next, we glue the tires completely, and cut off the excess twine and glue it on the cover.

   

8. Next, we glue the lid and cover our ottoman with varnish. Covering the ottoman with varnish is necessary so that the rope with which our ottoman is pasted over does not get wet under the influence of rain.

Tire ottoman - ready. By the way, as a decor, you can screw legs to it - wheels, then it will become the object of adoration for your children. That's all, subscribe and join our group of builders with your own hands!.