home Heaters

How to make a fountain for an apartment drawing. Making a decorative fountain for the house with your own hands. The principle of installation of the pumping system

Who said that a fountain is an exclusively outdoor fixture? Modern decorations of this type are used with equal success both outside the house and indoors - everything is decided by the size and device. For apartments and houses, as a rule, small-sized fountains are used, which are called "home fountain". It is about them, or rather about their options self-manufacturing will be discussed in this article.

A person can contemplate three things for a long time - for a long time he is not able to take his eyes off the flame, the flowing water and how someone else is working. It is for this reason that the most common decorations in houses and apartments are all kinds of fireplaces and fountains. In this article we will talk about fountains - together with the Dream House website, we will deal with the question of how to make a home fountain with your own hands? We'll consider various options self-production of this decor, and most importantly - we will deal with the principle of creating such things, the knowledge of which will allow you to independently design these products at home.

Do-it-yourself home mini-fountain photo

Home fountain: how it works

Most of you will probably be surprised at how simple a fountain is - you could even say that by the standards modern technologies this is an elementary thing that does not cause difficulties in manufacturing at all. If you deal with its design, then it can be divided into just a few separate parts. Plus or minus, of course, since there is no limit to perfection, and you can improve it, as they say, to infinity.

As for the principle of operation of such devices, there is nothing special to understand here - the movement of the liquid simply loops. There is a container from which the pump pumps out water and delivers it to the fountain nozzles - flying out in the form of a beautiful decorative jet or flowing down a waterfall, it returns back to the same container, from which, again, it is sucked in by the pump and sent to the next ring cycle. That's the whole fountain.

How to make a fountain at home: options

Among the most common options for making home fountains with your own hands, you can select just a couple of more or less successful designs. To be frank, only one is completely successful - the first variation, although acceptable for a house or apartment, still has several significant drawbacks.

Depending on the required dimensions, intermediate containers can also be installed - to create a so-called cascade of waterfalls, which will look much more attractive. The principle of making such fountains is no different from a single waterfall - the only thing that is added here is one or more intermediate containers. In such a situation, the pump pumps water into the upper tank, from where it flows by gravity into the reservoir located just below. In turn, water will flow from this reservoir into a container located below - with this approach to business, the number of containers can be unlimited.

home fountain photo

How to make a home fountain with your own hands: installation without a pump

I’ll make a reservation right away that this is not a perpetual motion machine, and such a fountain will not be able to work indefinitely - this is an excellent toy that clearly demonstrates the work of the laws of physics and nothing more. Depending on the containers used in the design of such a fountain, you can count on 10, 15 minutes, maybe even half an hour of operation time - then you need to recharge, which you will get tired of doing in the very near future.

We are talking about, for the operation of which three containers are required, connected in series with each other by tubes - this is a completely sealed system that works thanks to an air lock. From the receiving bowl, water enters the lowest, and most importantly, empty container - it presses on the air in it, which, in turn, creates pressure in the upper container (it is filled with water). It is this pressure that causes the water to rise upwards. What is most interesting, the rise of the jet can be quite large and reach 1m in height. Moreover, this fountain can even be somewhat "automated" - to organize its recharging with less time and effort spent. Undoubtedly, this is a noteworthy invention of mankind, to which it is worth devoting a separate article, which we will do in the future.

How to make a home fountain with your own hands: Heron's fountain photo

In conclusion of the topic of how to make a home fountain, a few words about very attractive additions that will allow you to contemplate not only the view of flowing water, but also observe various effects. The very first thing that comes to mind here is . It can be organized in many ways, but the most interesting of them is the use of a small electric generator. A small appliance bought in a store is quite capable of making the LEDs glow - you can arrange them any way and anywhere, the main thing is not to forget that water and electricity are incompatible things in principle.

Even the smallest pond is able to decorate your own summer cottage and give it a twist. And a do-it-yourself fountain will not only become a favorite place to relax and provide aesthetic pleasure, but will also become an occasion for compliments from invited guests.

But not everyone decides to build this mysterious hydraulic device with their own hands. Some summer residents mistakenly believe that the construction of a fountain is a laborious and expensive process, and one cannot do without the help of specialists in this matter. But every fan of spending time in nature can give himself such pleasure, the main thing is to know all the nuances of building a fountain with his own hands.

There are two types of fountains according to the type of construction.

The open version involves the supply of water to the nozzle. The formation of a jet in this version of the device occurs due to changes in the water level. The water pressure in this case is weak, so it is necessary to constantly monitor the water level. In addition, the water in such a fountain quickly becomes contaminated. To create it, you need to install a small tank at a height of about one meter above the nozzle.
A fountain with pump installation is the most practical and effective option. Thanks to the placement on the bottom of the pump, continuous circulation of water is ensured. Here, the pressure is stronger and the visual effect is more beautiful.

By design, pumps that act as fountains are divided into submersible and surface (stationary).

Best location for a fountain

When choosing a convenient place for the construction of a fountain, it is recommended to take into account the degree of slope of the earth. If the plot is uneven, it is better to place such a decoration in a lowland. This option for the location of the reservoir will allow not only to adjust the volume of groundwater, but will increase the oxygen saturation of the air.

too close to the house so that moisture in windy weather does not get on the walls;
in open areas, in order to prevent water from blooming due to sunlight on the reservoir;
next to the trees so that the leaves, seeds, fluff falling from them do not clog it, and the roots do not damage the waterproofing.

The fountain should be located in such a way that it is not an obstacle on the way to other buildings and is visible from all points. It is recommended to place the structure near the resting place.

The minimum distance that must be maintained between the fountain and plants, buildings, furniture is 50 cm. So the plants will not die from excessive moisture, and the furniture will not become unusable. The ideal option for the location of the fountain is partial shade and a place protected from the wind, located in close proximity to a source of water and electricity. This arrangement will save you from unnecessary wires and additional work on their insulation.

Having decided on the place, it's time to think about the shape and depth of the future fountain.

Preparation of materials for construction

To build a fountain in order to save money and effort, you can use the construction technology ornamental pond with the equipment of his pump.

Materials needed to build a fountain:

fountain container;
pumping station;
durable film;
bayonet shovel;
natural stones of various sizes;
sand, gravel;
decorative elements.

Selecting and installing a container

If you plan to build a miniature fountain, you can use an ordinary plastic basin or any other small container as a reservoir.

For large reservoirs, old bathtubs or a self-dug pit are suitable. If a bath is used, it is necessary to dig a hole of such a size that its edges are not higher than the ground. All holes are securely sealed in the bath, after which it is lowered into the pit and strengthened with earth, stones and sand.

For a homemade tank, a hole is made of the required depth and covered with a dense, high-quality film, which is fixed along the edges on the surface with stones. Stones of various shapes and sizes are also poured to the bottom. It is important that the stones do not have sharp edges and cannot cut through the film. The stones are evenly distributed over the entire bottom of the future fountain.

Choosing a pump for building a fountain

In order to construct a fountain on the site on your own, it is not necessary to purchase expensive materials, you can adapt any old elements. However, you should not spare money - the pump, the better it is, the more beautiful the fountain will turn out and will decorate the site for longer without causing problems.

A submersible pump is the best option for building a fountain in a summer cottage. Works on the principle of a centrifuge. You can also install a surface pump, it is mounted on the edge of the reservoir, but is most often used on large fountains and cascading reservoirs.

When choosing a pump, it is worth starting from the pressure that is constantly present in the pipe and the differences in this pressure. Therefore, buying the most powerful pump may not be justified, since not in all cases it will be able to work out its full power.

Regardless of which type of pump is chosen, it is important to remember that its power must be related to the diameter of the pipe. The jet of the fountain should come out under powerful pressure, and not slowly flow out of the pipe, since there will be no effect from such a design.

How to make a fountain with your own hands: step by step instructions

The construction of the fountain includes several main stages:

pit preparation;
fixing the trench;
installation of a container or covering the bottom and edges with a film;
installation of pumping equipment;
fountain decoration.

To build such a fountain you will need:

an old tire from a truck or tractor;
cement mixture, water, crushed stone and sand;
container for mixing cement and a shovel;
sealant;
building level;
mastic;
stones;
pump.

Stages of work:

Video - Do-it-yourself tire fountain

For such a fountain you will need to prepare:

thick film;
shovel;
sand;
pump;
stones of different sizes without sharp corners.

Stages of work:

we dig a hole, clear it of stones and tamp the bottom;

New life for an old bath

For this version of the country fountain, you need to prepare:

shovel;
pebbles;
pump equipment;
bath;
insulating tape;
metal scissors;
colored iron sheet;
drill.

Stages of the construction of the fountain:

we dig a pit corresponding to the size of the existing container;
we put the bath inside and plug all the holes;

we cut out wide strips from iron and lay them around the bath, close them with stones;

For this sprinkler you will need:

plastic bottle;
metal, strong wire or nail;
insulating tape;
garden hose.

Stages of building a fountain:

put the mini-fountain in the right place and turn on the water.

This option is perfect for watering the garden and garden.

Decorative fountain for home

To build such a fountain you will need:

a large flower pot with a pallet;
paints on glass and ceramics;
small water pump
contours;
decorative balls, aquarium decorations.

Construction stages:

decorate the pot with paints;
make a small hole in the bottom of the pot;
install a pump under the pallet;
we drag the pump tube through the hole made in the pot;
we fill the bottom with pebbles;
decorate with artificial plants and figurines;
fill the pot with water.

Video - DIY decorative fountain

Fountain decoration

You can emphasize the uniqueness of a handmade fountain by decorating it. It is recommended to lay out beautiful, multi-colored stones of different sizes around the reservoir, put flowers in pots, place cute figurines of animals, birds, and so on.

In order for the fountain to amaze with its beauty and unusualness at night, you can make it illuminated with the help of special equipment. Lamps installed around the perimeter of the fountain and lighting at its bottom will create a fabulous, magical atmosphere.

The bottom of the reservoir can be planted with special plants, bushes can be planted around the fountain.

Any country pond and fountain, including, needs careful care. To maintain the order and transparency of the water, a pleasant spring appearance of the structure, it is necessary to regularly clean the tank. With the help of special devices, it is required to remove leaves, seeds, fluff and other objects from the surface of the water that can not only spoil appearance reservoir, but also lead to a malfunction of the fountain.

At the end of the summer season, it is necessary to drain all the water, transfer the removable parts of the structure to a closed room, and cover the remaining parts and the bowl with a film so that dirt does not get into them.

It will not be difficult to build a fountain with your own hands in a country house or even in an apartment and will not require large financial resources. Before building a decorative fountain, you need to decide on the shape, size and installation location. There are many options for the location of such structures - at the gazebo, on the lawn, in the garden. After the construction of the fountain, you need to carefully monitor the purity of the water, regularly remove debris and add water, as it will evaporate.

Such designs are widely used in the design of suburban areas. Fountains can decorate any abandoned area or become a highlight suburban area. And by connecting fantasy and decorative elements, you can make it even more beautiful and unusual.

Already today you can start building a small fountain in your summer cottage. We will show you how to do it simply, beautifully and inexpensively.

Varieties of fountains

A fountain is a decorative hydraulic structure in which water can be supplied under pressure up and to the sides, as well as simply flow down the walls of the structure. The water in the fountain circulates due to the operation of the pump (this principle is also used in artificial and). Depending on the nature of the movement of the water flow, cascade, geyser and fountains of the "bell" type are distinguished.

Geyser. The most common version of the fountain, when pressurized water is thrown vertically or at an angle. The height to which the liquid is supplied can vary widely. By changing this indicator, you can create both a cozy low fountain and an impressive noisy stream of water, reaching a height of several meters.
Bell. Another easy-to-device solution that fits perfectly into the landscape landscape. Water in such a fountain is supplied to a small height, from where it is evenly distributed around the perimeter by a nozzle, forming a continuous water film in the form of a hemisphere.
Cascade. The implementation of cascades is diverse and most effective: water slowly overflows from one container to another, creating the illusion of stepped waterfalls.
hybrid solutions. Usually they combine geyser and cascading varieties of fountains. Water under pressure is supplied to the upper part of the cascade structure, where one or more geysers are formed due to excess pressure. Further, the path of water runs along the cascade.

Building a stone fountain

We invite you to familiarize yourself with the manufacturing technology of the simplest cascade fountain from improvised materials. The techniques underlying its construction will allow you to build any decorative fountain with your own hands.

Before starting work, sketch out a diagram of your future creation on a piece of paper. This will allow you to evaluate the pros and cons of the intended design and at this stage to choose the best option for the pump.

Improve your garden space in just 10 easy steps:

Choose the right place. Try to find a platform on the leeward side of the house, otherwise its walls may suffer from moisture. Decide on the height of the garden fountain X ( see fig. higher). The distance between the house and the fountain should not be less than three times the height to which water is supplied.
Decide on the size. Use a ready-made container (plastic, ceramic, metal, etc.) or dig a small ditch and cover it with waterproofing material or fill the bottom and walls with concrete.
Dig a pit and a trench. Make the dimensions of the pit 10-20 cm larger than the dimensions of the container. This is necessary for the construction of a sand cushion. If, after installing the plastic container, voids remain on the sides, fill them with soil and gravel. Dig a trench 30 cm deep from the pit to the house - it is necessary for laying the cable supplying the pump. For protection, place it in plastic pipe or hose of the correct size. Lead the cable into the house.
Install submersible pump . In order not to have to frequently clean the filter of pumping equipment, install it on a brick pedestal.
Connect pump with stainless pipe. The tube will serve as a frame for the stone structure, and water will be supplied through it. Determine the size of the tube, taking into account the depth of the container and the height of the fountain X.
Cover the container with a grate and bars. To avoid water pollution with large debris, cover the container with a plastic or stainless steel mesh with a cell of no more than 1 × 1 cm. Install several bars across the container that can support the weight of the stone structure.
Prepare stones for installation. Give preference to flat stones of interesting colors and shapes. Wash and dry thoroughly. Consider their location and drill a hole for the tube (see point 5).
Assemble a decorative stone structure. Carefully place the stones on the tube, trying to place the center of mass in the lower 1/3 of the height of the structure. This means that the larger stones should be at the bottom.
Fill the container with water and check the operation of the fountain. Water should evenly wash most of the stones. Adjust the pressure and change the stones if necessary.
Finishing touch. Mask the gaps with small pebbles, decorate the top of the fountain to your liking.

Not quite sure how to make a fountain? The process of erecting such a structure is presented in some detail in the following video.

You can use the most unexpected objects as nozzles. The following video shows a bottle garden fountain - looks unusual.

Fountain Pump Selection

The range of pumps is extremely large, so do not rush to buy the first model that comes across. Your task is to choose the device that is optimal in terms of characteristics and suitable for operation in specific conditions. And the first thing you need to decide is to buy a submersible or surface pump?

Features of surface and submersible pumps

Characteristics	Submersible pumps	Surface pumps
	The device, hidden under the water column or separate structures, remains invisible to prying eyes	Placing pumping equipment in an open area involves the construction of additional masking structures (decorative stone, bushes, box). High risk of theft
	It comes down to installing the pump on a pedestal in the bottom of the reservoir, connecting pipes to it and supplying power	Work is being carried out near the reservoir, water is discharged to any part of the fountain

Service	The device is under water, which complicates routine maintenance. Most models need to be dismantled for the winter to avoid breakage.	The pump is located in a dry place, has free access. Easily tolerates wintering on the job site
	Hidden under water pumping equipment is almost inaudible	Even when the pump is disguised with decorative elements, its operation is noticeable by the characteristic sound
The best choice	For small fountains	For difficult to constructively fountains when sold on large reservoirs
	As a rule, with equal characteristics, submersible models are cheaper than surface ones.

For each specific case, choose a pump with the appropriate characteristics. First of all, you should be interested in the following indicators:

maximum head. Usually denoted H max, measured in meters. Characterizes the maximum height of water rise;
maximum performance. Denoted Q max, measured in m 3 / h or l / h. Determines the volume of fluid that can be pumped through the pump in an hour.

To make it easier for you to select equipment, we suggest that you familiarize yourself with the data in the table below. With their help, you can determine the approximate characteristics of the pump.

Indicative data for choosing a fountain pump

Fountain type/Specifications	H max, m (maximum head)	Q max, m 3 / h (maximum productivity)
geyser




cascading

A fountain without a pump - is it real?

There are two approaches to making a fountain without installing a pump:

head due to the pressure of the liquid column. To build this design, you will need a sealed container, a pipe or hose installed in place of the fountain nozzle. Fix the container above the level at which the nozzle is located (pressure depends on the height), connect it with a hose or pipe to the nozzle. Fill the tank with water - get a periodic design: the fountain will work until the water tank is empty;
head due to pressure water pipe . Take advantage of the pressure potential created in the centralized plumbing system of your garden partnership. Just connect the fountain to the pipe and you can adjust its operation as you wish. Only in this case, do not forget to provide options for using the received volume of water!

Regardless of which fountain you decide to build on garden plot, be sure to check out the most. Someone else's negative experience is worth a lot! And you can always buy a fountain - a ready-made factory solution that does not require complex work.

Making an indoor fountain it will not take much time, while it will be possible to save a significant amount and as a result get a beautiful interior decoration. If you believe the practice of Feng Shui, then the location of the waterfall on the northwestern side of the house will allow the family to live in abundance for many years.

Do-it-yourself home fountain

The construction of small cascades that will decorate the interior should be carried out thoughtfully, since it is important to realize that there is nowhere for water to drain. This means that the liquid inside must be present in the same amount. In other words, cyclicality is required. Water accumulates in a container of storage type. A pump is installed in the system to lift the liquid to the top of the waterfall, and from there it will freely penetrate back into the container.

To make the trickles beautiful, several decorative obstacles should be installed on the runoff path, pebbles, shells, and so on are suitable for this. To make the home fountain beautiful, it is worth making several thresholds with recesses. This will allow you to get the characteristic sound of falling water.

Preparation for work

To make a fountain with your own hands at home, you must first select a pump. The power of the device will depend on how high the water will splash out. Everyone selects this value independently based on the design option. To build a fountain with water spouting upwards, you will need a pump that will have more power and a regulator. And for a small cascade, an aquarium-type pump is enough to filter the liquid.

Before starting work, need to stock up:

reservoir;
tubes;
glue;
decor items.

The bowl for the drive should be selected capacious in size. She will perform her direct duties, collect liquid, and besides, she will become the basis of the entire fountain. Some pebbles can be placed directly inside the container.

Pump manufacturing

Making a low-power pump quite capable of being mastered by everyone. To make it, you need to use:

motor from any object, while it must be protected from moisture penetration;
batteries;
connector for the charger, when using a mobile phone;
several LEDs;
toggle switch;
electric drive;
gears;
small round container;
waterproof adhesive.

Using a gear, an impeller is made, which will supply moisture. On the bottom of the tank you need to make a hole where to insert the motor shaft. An incision is also made on the side for liquid. Install the motor shaft in the container, glue the main part of the motor to the bottom of the container, the impeller is mounted on the shaft. Then a small part of the plastic is cut off, in which a hole is made, the open area of the pump is sealed. A tube is attached to the side hole and sealed. Then you need to connect the wires to the motor and make them insulated using ordinary sealant.

When installing batteries, be careful not to get wet. Fastening is done on the outside of the pool, a toggle switch is also installed here.

Composition assembly

To make a homemade fountain with your own hands assemble correctly, you need to attach a home-made or store-bought pump to the bottom of the storage tank. The depth of the tank must be selected so that the pump is completely immersed in the liquid. Masking the pump can be done in several ways, for example, put on a mesh cover, on top of which pebbles will be poured, shells can also be used.

You can use the dry fountain method, while the water is not visible on the surface. This is achieved by laying the lattice and fixing the stones. Penetrating through the stones, the liquid will not form an visual pool, everything will accumulate in the container.

Can build fountains k for home, using ceramic pots. This is quite possible if you follow some recommendations:

This miniature composition is installed on a table or in a special corner, next to indoor plants. Such a fountain can be an excellent addition to the decor, as well as a humidifier in the apartment.

original waterfalls

Waterfall vertical type is a stylish and fashionable decoration in any interior. It requires more time and effort. The difference in the compositions of the desktop and vertical type is the pump, which must be much more powerful. When choosing a pump, you should pay attention to the pump, it should raise water to a height of about 2 meters. Thus, it is possible to achieve the arrangement of a waterfall, in which the top will be located under the very ceiling.

Before proceeding with the main work on the construction of the fountain, you should take care of the waterproofing of the floor surface. You can use plastic wrap. It is better if it begins to cover an area slightly larger than the capacity of the structure.

To prepare a panel that will be used to drain water, you need to use some materials. It is desirable that they be of high quality, and the period of use of the waterfall will be longer.

Install the pallet and fix the board on which the glass will be fixed vertically. Using support bars, the frame is knocked down, on which the crossbar is fixed.

Then make holes in the water pipe not very far from one another, so that you get a view of the integrity of the waterfall. If they are placed at a more distant distance, then several separate streams will be obtained. Make a cap for the end of the tube and attach it to the top of the cover. If there is a desire, hold the backlight.

Place the glass panel in the lower area of the retainer and install in a vertical position. Using liquid nails, attach to the boards on the side. To prevent the liquid from spreading, strips of glass or plastic are installed on the edges.

The pump is installed in the pan, a tube is connected to it in order to supply fluid to the top. After connection, the connection is treated with a sealant. Hang the front cover. Then they move on to decorating the fountain based on their own preferences.

There is a huge selection of materials for decoration indoor fountains and waterfalls, you can buy them at any pet store. Various flower boutiques sell bamboo supports, as well as original containers and tanks. Going to the souvenir shop, you can buy figurines and bonsai.

How pleasant it is to sit in a comfortable chair and enjoy a pleasant stay, watching the drops of water flow down. A fountain or homemade waterfall will delight the eye, and the murmur will soothe and relax. If you put several living plants around the fountain, you get a picturesque picture.

It is worth considering attractive additions with which you can decorate any building. First of all, of course, we are talking about highlights. They can be different, with an iridescent effect. The most commonly used electric generator. To do this, you need a small device bought in a store, it will quite cope with the task and make the LEDs work.

You can arrange the elements in any quantity and in different places, the main thing to remember is that water should not fall on them. After all, this is still electricity, so you should take care of security measures.

SELECTING THE TYPE OF THE FOUNTAIN

There are two types of fountains according to the type of construction.

The open version involves the supply of water to the nozzle. The formation of a jet in this version of the device occurs due to changes in the water level. The water pressure in this case is weak, so it is necessary to constantly monitor the water level. In addition, the water in such a fountain quickly becomes contaminated. To create it, you need to install a small tank at a height of about one meter above the nozzle.
A fountain with pump installation is the most practical and effective option. Thanks to the placement on the bottom of the pump, continuous circulation of water is ensured. Here, the pressure is stronger and the visual effect is more beautiful.

By design, pumps that act as fountains are divided into submersible and surface (stationary).

THE OPTIMUM PLACE FOR THE FOUNTAIN

When choosing a convenient place for the construction of a fountain, it is recommended to take into account the degree of slope of the earth. If the plot is uneven, it is better to place such a decoration in a lowland. This option for the location of the reservoir will allow not only to adjust the volume of groundwater, but will increase the oxygen saturation of the air.

too close to the house so that moisture in windy weather does not get on the walls;
in open areas, in order to prevent water from blooming due to sunlight on the reservoir;
next to the trees so that the leaves, seeds, fluff falling from them do not clog it, and the roots do not damage the waterproofing.

The fountain should be located in such a way that it is not an obstacle on the way to other buildings and is visible from all points. It is recommended to place the structure near the resting place.

Having decided on the place, it's time to think about the shape and depth of the future fountain.

PREPARATION OF MATERIALS FOR CONSTRUCTION

For the construction of a fountain in order to save money and effort, you can use the technology of building an ornamental pond with equipment for its pump.

Materials needed to build a fountain:

fountain container;
pumping station;
durable film;
bayonet shovel;
natural stones of various sizes;
sand, gravel;
decorative elements.

TANK SELECTION AND INSTALLATION

If you plan to build a miniature fountain, you can use an ordinary plastic basin or any other small container as a reservoir.

SELECTION OF A PUMP FOR CONSTRUCTION OF A FOUNTAIN

HOW TO MAKE A FOUNTAIN WITH YOUR HANDS: A STEP-BY-STEP INSTRUCTION

The construction of the fountain includes several main stages:

pit preparation;
fixing the trench;
installation of a container or covering the bottom and edges with a film;
installation of pumping equipment;
fountain decoration.

FOUNTAIN WITH A POND FROM AN OLD TIRE

To build such a fountain you will need:

an old tire from a truck or tractor;
cement mixture, water, crushed stone and sand;
container for mixing cement and a shovel;
sealant;
building level;
mastic;
stones;
pump.

Stages of work:

VIDEO - FOUNTAIN FROM THE TIRE WITH YOUR HANDS

FOUNTAIN FOR COTTAGE USING FILM

For such a fountain you will need to prepare:

thick film;
shovel;
sand;
pump;
stones of different sizes without sharp corners.

Stages of work:

we dig a hole, clear it of stones and tamp the bottom;

NEW LIFE FOR AN OLD BATH

For this version of the country fountain, you need to prepare:

shovel;
pebbles;
pump equipment;
bath;
insulating tape;
metal scissors;
colored iron sheet;
drill.

Stages of the construction of the fountain:

we dig a pit corresponding to the size of the existing container;
we put the bath inside and plug all the holes;

we cut out wide strips from iron and lay them around the bath, close them with stones;

MINI FOUNTAIN FROM A PLASTIC BOTTLE

For this sprinkler you will need:

plastic bottle;
metal, strong wire or nail;
insulating tape;
garden hose.

Materials for a decorative fountain

Construction stages:

decorate the pot with paints;
make a small hole in the bottom of the pot;
install a pump under the pallet;
we drag the pump tube through the hole made in the pot;
we fill the bottom with pebbles;
decorate with artificial plants and figurines;
fill the pot with water.

VIDEO - DECORATIVE FOUNTAIN OWN HANDS

FOUNTAIN DECORATION

The bottom of the reservoir can be planted with special plants, bushes can be planted around the fountain.

Any country pond and fountain, including, needs careful care. To maintain the order and transparency of the water, a pleasant spring appearance of the structure, it is necessary to regularly clean the tank. With the help of special devices, it is required to remove leaves, seeds, fluff and other objects from the surface of the water that can not only spoil the appearance of the reservoir, but also lead to a malfunction of the fountain.

Such designs are widely used in the design of suburban areas. Fountains can decorate any ownerless area or become the highlight of a summer cottage. And by connecting fantasy and decorative elements, you can make it even more beautiful and unusual.

contemplative

landscape design