How to make slime from glue and shampoo. How to make your own slime from improvised materials. From liquid soap and glue

Today I will tell you several ways to make a slime.

Slime is a very popular and exciting children's toy that will keep your child busy for a long time.

The cartoon character fell in love and became so popular that in 1976 such a children's toy was invented, which is a pleasure not only for children, but also for adults.

Since the slime is not a durable toy, you need to buy a new one every time.

But craftsmen will always be found.

In order not to spend money, it is best to try cooking it at home and be sure that it is safe for your baby's health.

Moreover, special materials are not required, and time for its manufacture, too.

Trust me, your child will love this toy.

I want to tell you about how to make a slime at home from improvised materials

How to make a slime without glue from toothpaste

You will need:

• Toothpaste
• Food coloring

To begin with, squeeze a little toothpaste into a glass, I want to say right away that it is better to use a thick, gel paste

Now add a little dye, the more you add it, the richer the color will be

Mix the mass well until the color becomes uniform and there are no grains of dye left.

To do this, put a mug with the prepared mass in a pot of boiling water in a water bath and hold for 15 minutes

Children's fun is ready.

If the resulting composition turned out to be dry, then you need to slightly grease your hands with any oil and knead it.

The size of your slime depends on how much paste you spend on it.

How to make a slime from PVA glue and sodium tetraborate

Necessary:

• PVA glue
• Sodium tetraborate
• Dye
• You can also add glitter if you like.

How to do:

Pour the glue into a container.

Necessary glitter. mix well

We add sodium tetraborate, it is very easy to purchase at a pharmacy

Stir, then knead with your hands

Our slime is ready, its production does not require much work.

Making a toy out of shampoo and salt

It is very easy to make it, it will take all 20-25 minutes.

Take 3-4 teaspoons of shampoo

The next step is to add a little salt while constantly stirring. The amount of salt is determined by the density of the mixture

Put the resulting mixture in the refrigerator for 10-15 minutes

Slime is ready!

If after that the prepared mass sticks to your hands, try adding a little more salt.

How to make slime without flour glue

We will need:

First we need to pour a glass of flour

Pour a glass of water, if the mass turned out to be thick, then you need to add more water to get the consistency of sour cream

The resulting mass is divided into three parts

Color the first one with food coloring.

Second with acrylic paints

And the third with ink from a felt-tip pen, mix each until smooth

There are several ways to prepare a soft consistency.

We put the first one in the microwave for 1 minute, at medium power, do not forget that the dishes should be designed for the microwave

Take out and let cool

We send the second part to a preheated pan, you need to warm it up all the time stirring until it thickens

Pour the third into molds, put in the oven at 160 degrees for 5 minutes

All of these methods are suitable

It's true, it's all just one time.

While the slime is warm, it is elastic, stretches well, but after cooling it becomes not so soft

Slime made from detergent and hand cream

It turns out a funny, jelly-like toy

Need:

• Detergent "Fairy"
• Hand cream
• Food coloring
• plastic cup
• Stir stick

How to do:

1. Pour a tablespoon of detergent into a glass
2. Add a little less than half a teaspoon of soda, mix thoroughly
3. Squeeze out the hand cream, it should be a little more "Fairy" mix too
4. Add a little dye, stir until completely dissolved, the dye is of your choice of color
5. We merge everything into a bag, put it in the refrigerator for 4 hours
6. You will get an excellent jelly-like toy, if you don’t like something in its consistency, try adding or reducing the amount of hand cream

I recently read very interesting ways of making this funny toy on the blog "Altynay - Women's Blog" http://myaltynaj.ru/kak-sdelat-lizuna.html I advise you to read it too, and if you like it, then do it.

5 ways to make slime, video

All these methods of making at home are very affordable, and the resulting toy will appeal to children, and you yourself, for sure, will be happy to crush it in your hands by stretching and folding it into spirals.

Lizun or "gum for hands" is an unusual plastic toy that changes its shape, which you can easily make yourself at home. How to do it? In our article, you can learn a few simple ways slime preparation.

Shampoo and salt

Making a slime out of shampoo and salt is pretty easy. For this you will need the following components:

• thick shampoo - 4-5 tsp;
• salt - 1 tsp

Put shampoo and salt in a small container. Then mix thoroughly and set aside refrigerator compartment for 15-20 minutes. Such a “gum for hands” will be somewhat different from the store version due to its greater ductility and stickiness.

colorful slimes

Polish for hair

Hair sprays have in their composition a special substance - polyvinyl acetate, which forms a film on the surface of the hair, due to which it turns out to preserve their volume. You can make your own slime from any hairspray. Take:

• hairspray - 20-25 sprays;
• PVA glue - 95 g;
• gouache or acrylic paint - 1-2 drops.

Pour PVA glue into a bowl and start injecting hairspray, stirring the mixture constantly. After the future slime begins to thicken, add gouache or acrylic paint to add color. Continue stirring until a homogeneous mass is obtained.

Plasticine

For the preparation of "manual chewing gum" from plasticine, the following ingredients are needed:

• transparent glue - 250 ml;
• soft plasticine - 15-20 g;
• boiling water - 300 ml.

Take a small bowl, put half a teaspoon of sodium tetraborate into it and pour boiling water over it, mix thoroughly until the "borax" is completely dissolved. Allow some time for the mixture to cool. Prepare a second container for mixing plasticine and transparent glue until smooth. Then mix all the ingredients completely until the stickiness of the composition to the hands disappears. Such a slime should turn out to be quite viscous.

PVA glue

Oddly enough, but PVA glue can help in such an interesting activity as making slime. Ingredients:

• PVA glue - 100 g;
• acrylic paint (any shade) - 1 tbsp;
• water - 200 ml;
• contact lens care liquid - 1 tsp;
• baking soda - 1 tbsp.

Pour PVA glue into a small plastic container and mix it with water. Gradually add acrylic paint - as a result, you should get a liquid of even shade. Now take another container and pour water into it and pour baking soda - mix thoroughly until sodium bicarbonate is completely dissolved. Mix the contents of the two containers together until a thick mass is formed.

elastic bright slime of different colors

Sodium tetraborate

Sodium tetraborate is a sodium salt of boric acid, widely used in industrial production. From this substance, it is quite simple to prepare a slime. The following ingredients are required:

• cold water - 250 ml;
• PVA glue - 100 g;
• sodium tetraborate (borax) - ½ tsp;
• gouache - 2 tsp;
• glycerin - 2-3 drops.

Pour water and PVA glue into a shallow bowl - mix thoroughly. Then add a little gouache (color at your discretion), half a teaspoon of sodium tetraborate, glycerin - mix until a homogeneous consistency is obtained. Place the mixture in the refrigerator for 15 minutes.

Shaving foam and PVA glue

Slime can even be made from ordinary shaving foam. Take the following:

• shaving foam - 200 ml;
• PVA glue - 100 g;
• water - 200 ml;
• sodium tetraborate - ½ tsp;
• gouache paints - 50 g.

Put the "borax" into a plate with high sides or a bowl and pour in water, mix thoroughly until the tetraborate is completely dissolved. Then add shaving foam, PVA glue and paints. Mix all the ingredients again. The result should be a soft lump that will stick to your hands, so to get rid of stickiness, you need to crush it in your hand for several minutes, and then put it in the refrigerator for 10-15 minutes.

Starch

You can also make your own “gum for hands” using starch. Components:

• starch - 100 g;
• PVA glue - 100 g;
• water - ½ cup;
• food coloring or acrylic paints -50 g.

Pour half a glass of water into a shallow bowl, add starch, stirring it thoroughly until completely dissolved. Then add food coloring or acrylic paints (color of your choice). Allow the resulting mixture to cool slightly by placing it in the refrigerator. Transfer the starch to a bag or plastic bag and mix with PVA glue. Shake the contents of the bag well until a homogeneous mass is formed.

slime with amazing texture

Toothpaste

There are 2 ways to prepare slime based on toothpaste. Let's look at each of them in more detail.

On the water

You need to take the following ingredients:

• toothpaste - 100 g;
• water - 200 ml.

Squeeze out into a bowl toothpaste. Boil water in a small saucepan over medium heat. Put a bowl of pasta in a water bath and cook for 15-20 minutes. Don't forget to stir constantly. As a result of the above manipulations, a dry mixture should be obtained, which must be put to cool for a while. Lubricate your hands with olive oil and start kneading the cooked mass. You will get a viscous and elastic slime.

In the microwave oven

To make a slime in the microwave based on toothpaste, you will need:

• toothpaste - 100 g;
• cosmetic oil (for example, for hair or face) - 10 ml.

Squeeze the toothpaste into a shallow dish intended for microwave ovens. Let it warm up in the microwave for 2-3 minutes. Then remove the plate, mix the pasta thoroughly and send it back to bask for another 3 minutes. As a result of all the manipulations, you should get a dry mixture. Apply cosmetic oil to the future slime and knead it properly in your hands.

Dishwashing liquid

Making "gum for hands" from detergent is very simple. Ingredients:

• dishwashing detergent - 100 ml;
• baking soda - 2 tablespoons;
• hand cream - 1 tsp;
• acrylic paint - 1-2 drops.

Place in a small container detergent, then add some baking soda, hand cream, and acrylic paint- mix the contents very thoroughly. The mixture should be thick enough. Put the resulting mass in the refrigerator for 2-3 hours.

Flour

To make a flour-based slime, you need the following ingredients:

• wheat flour - 100 g;
• hot water - 100 ml;
• cold water - 100 ml;
• acrylic paint - 1-2 drops.

Sift wheat flour with a sieve into a shallow container. Add to it first cold water, and then hot (in no case use boiling water) and dye. Stir the contents of the dish properly. Place the mixture in the refrigerator for 2-3 hours.

slime making example

Air freshener

It is possible to make "manual chewing gum" from an air freshener, but only with the help of additional components:

• PVA glue - 100 g;
• air freshener - 20-30 sprays;
• sodium tetraborate - ½ tsp

Pour PVA glue into a shallow dish and add air freshener to it - mix thoroughly. Then pour in half a teaspoon of sodium tetraborate and mix everything well again. Let the resulting mixture brew in the refrigerator for 10 minutes.

Nail polish

As the main component of the slime, you can use ordinary nail polish. Take:

• nail polish - 3-4 drops;
• PVA glue - 100 g;
• water - 100 ml;
• sodium tetraborate - ½ tsp

First, mix cosmetic varnish and PVA glue. Then add some water and half a teaspoon of sodium tetraborate. Mix all ingredients thoroughly. Place the resulting mixture in the refrigerator for 10 minutes.

Gelatin

You can prepare a slime without using PVA glue. For this you will need:

• plasticine - 100 g;
• gelatin - 50 g;
• water - 100 ml.

Add gelatin to water and stir until completely dissolved. Then let it brew for 1-2 hours. Boil over low heat for 2-3 minutes. In a separate container, mix plasticine with water and gelatin. Knead the mixture well in your hands until a homogeneous mass is obtained.

Chocolate spread «Nutella»

Slime made from Nutella chocolate spread is edible. It consists of:

• pasta "Nutella" - 4-5 tablespoons;
• marshmallow "Marshmallow" - 10-15 pcs.

Melt the marshmallows in the microwave. Add Nutella Chocolate Paste to it. Mix thoroughly - it will take enough time, but the result is worth it. When ready, you can eat the resulting slime by spreading it on bread or cookies.

Sweets "Frutella"

To prepare an edible slime, you will need the following ingredients:

• sweets "Frutella" - 6-7 pcs.;
• powdered sugar - 100 g;
• water - 300 ml.

Melt the sweets in a water bath. Let cool. Add powdered sugar and roll the resulting mixture in your hands until it loses its stickiness.

silicate glue

"Gum for hands" from silicate glue will be completely transparent. For its manufacture you need:

• silicate glue - 100 g;
• water - 250 ml;
• sodium tetraborate - ½ tsp

Pour 250 ml of water into a small bowl and add sodium tetraborate - mix until the "borax" is completely dissolved. Then squeeze out the silicate glue and mix all the ingredients together thoroughly.

homemade slime

Salt and soap

Let's look at another unusual recipe for making homemade slime. Take the following:

• liquid soap - 100 ml;
• salt - 1 tsp;
• acrylic paints or food coloring - 1-2 drops.

Pour 100 ml of liquid soap into a container, then add salt and dye to it. Mix thoroughly. Place in refrigerator for 15 minutes.

metal shavings

The recipe for making slime from metal shavings is considered unique, as it is magnetic. Ingredients:

• metal shavings - 100 g;
• PVA glue - 100 g;
• boric acid - 1 tsp

In a shallow container, mix iron shavings, PVA glue and boric acid. Stir until the mass is thick enough. Then take a magnet and bring it to the slime - it should stretch out.

polyvinyl alcohol

Polyvinyl alcohol or PVA is often used to make slime as an ingredient that replaces PVA glue. Ingredients:

• polyvinyl alcohol - 3-4 tbsp.
• "Bura" - 1 tsp;
• food coloring or gouache - 1-2 drops;
• warm water - 200 ml;
• medical bandage - 30 cm.

Dilute alcohol in water and then simmer for 30 minutes. In a small bowl, dissolve the "borax" in water, pass through a bandage to remove excess liquid. Mix sodium tetraborate with PVA and gouache. Put in a plastic bag and carefully remember with your hands. Place the slime in the refrigerator for 15 minutes.

Baking soda and glycerin

Prepare the following ingredients:

• baking soda - 100 g;
• glycerin - 2-3 drops;
• sodium tetraborate - ½ tsp;
• PVA glue - 100 g;
• dye - 1-2 drops;
• water - 200 ml.

Heat the water without boiling. Add sodium tetraborate, glycerin, PVA glue and dye to it. Mix all the above ingredients thoroughly until a homogeneous mass is formed.

Hydrogen peroxide

To make a slime based on hydrogen peroxide, you will need:

• hydrogen peroxide - 1 tbsp;
• PVA glue - 100 g;
• water -100 ml;
• dye - 1-2 drops;
• baking soda - 100 g.

Water

You will need the following components:

• water - 200 ml;
• baking soda - 100 g;
• dye - 1-2 drops;
• shower gel - 2 tbsp.

Dissolve baking soda in water. Add a couple of drops of dye, as well as 2 tablespoons of shower gel. Mix all ingredients thoroughly. Put the resulting mass to solidify in the refrigerator for 20 minutes.

In a separate container, mix baking soda with water. Add dye and PVA glue - mix again. At the very end, pour in hydrogen peroxide to give the mass airiness. The slime will become like foam.

Glue stick

You will need the following ingredients:

• glue stick - 1 pc.;
• dye - 1-2 drops;
• sodium tetraborate - ½ tsp;
• water - 100 ml.

Remove the glue from the plastic shell, put in a special dish to warm up in the microwave oven for 2-3 minutes. Add dye, water and sodium tetraborate to the glue - mix thoroughly. Put the resulting mass in the refrigerator for 5-10 minutes.

In our article, you got acquainted with the most interesting and unique recipes for making slime toys at home. All of the above ingredients are safe as long as you follow the rules for working with chemicals.

Greetings, friends!

Any child, and sometimes even an adult, is interested in playing with such a funny toy as a slime. It is also called slim or heidgum. This is a very popular activity among children. It's fun to toss and watch as it spreads across the surface.

But it is not necessary to buy a slime that is made from chemicals. After all, it is unsafe for the health of the child. Making your own unusual toy with your own hands is very simple. You won’t have to spend a lot of time on the manufacturing process, and you will need a minimum of components that everyone has in the house. This allows you to literally make a toy that will delight kids in just five minutes. How to make a slime at home? We offer recipes to choose from.

From PVA glue and starch

Components that will be required:

• 25 grams of PVA glue (as fresh as possible);
• food coloring (not a large number of);
• 70 grams of liquid starch;
• tight polyethylene bag.

Mix the dye and starch in the bag. If there is no food, you can use paint, brilliant green or beetroot juice. Do not add a large amount of dye. This will lead to the fact that during the game the slime will leave traces. If it is not possible to use liquid starch, then you can dilute the usual one in a ratio of 1: 2.

Next, glue is poured in, the bag is closed and tied. All components are well mixed until a thick homogeneous mass is formed. Excess liquid is drained, the contents are wiped. Slime is ready! You can safely play the resulting toy. To prevent dust from accumulating on the slime, it is recommended to store it in a container that closes tightly. It will last for about a week.

It may not work the first time, but don't despair. The main thing is to keep the proportions.

From baking soda

Children can play with such a toy only under the supervision of an adult, as the detergent is included in the composition. Wash your child's hands well after playing.

For the composition you will need:

• baking soda;
• water;
• detergent;
• dye of natural origin.

Mix detergent, dye and water in the prepared container. Then soda is added and mixed well. The mixture should be fairly thick. If the consistency is too thick, then it can be diluted with water. An entertaining toy is ready to play! The only remark: you should carefully monitor that the children do not take the slime in their mouths.

From flour

This slime making method is ideal for young children. If you use a dye of natural origin, the toy will become absolutely safe. Of course, natural dye does not differ in brightness and color saturation. But the slime with the content of such a component will not harm the health of children.

Required components:

• ¼ cup hot water;
• ¼ cup cold water;
• 400 grams of any flour;
• some natural dye.

Pour the sifted flour into a small bowl, add cold water first, and then warm water. In no case do not use boiling water, otherwise you will get a regular paste. Mix everything thoroughly until the lumps dissolve and the mass becomes homogeneous. Add color and mix again. The result should be a sticky mass. Put the mixture for 4 hours in a cold place. When the mass has cooled and acquired the necessary shape, you can give it to the children for a fun game.

From washing powder

Making such a slime is very simple. The only thing is that instead of loose powder, you need to use a gel-like one. Other products, such as shower gel or liquid soap, will not be able to replace it. They contain completely different components.

To make slime, you need to take:

• ¼ cup stationery glue;
• 70 grams of gel powder;
• dye of natural origin;
• rubber gloves;
• bowl.

Glue is poured into the bowl. Its quantity can be increased or decreased. It all depends on the desired size of the toy. Dye is added and stirred until a uniform color is obtained. Then the powder is added and again thoroughly mixed. The mass should become sticky and resemble putty in consistency. If the mixture is too thick, dilute with a few drops of powder.

Next, gloves are put on, the mixture is removed from the bowl and kneaded well, as the dough is kneaded. In the process, the mass acquires elasticity and softness, and all excess liquid flows out. That's all! This slime is stored in a container with a lid. If it starts to thaw, put it in the refrigerator.

From shampoo

It's also an easy option. Components:

• any shampoo;
• dishwashing liquid.

The same amount of necessary components is mixed in a pre-prepared container. The composition of the ingredients should not contain additional substances, for example, grains, as in a scrub. The color of the toy will directly depend on the color of the materials.

The ingredients are thoroughly mixed and put in the refrigerator for at least a day. When the mass acquires the necessary consistency, you can play with the slime. This toy should only be stored in the refrigerator. Otherwise, it will melt and lose its shape. You can play slime for about a month. Care must be taken not to accumulate a lot of dust on it. If the slime has become too dirty, it will have to be thrown away and a new one made.

From alcohol and borax

To make a toy, you need:

• water;
• polyvinyl alcohol (dry powder);
• sodium borate;
• dye.

Surely many are afraid of the borax component. But no need to worry, sodium borate is freely available in all pharmacies.

So, the powder is poured into an enamel bowl and diluted with water, following the instructions on the pack. Just do not need to dilute all the alcohol at once.

Put on fire and heat up for about 45 minutes, stirring constantly. Then it cools down.

In a glass of warm water, dilute 2 tablespoons of sodium borate, wait until the crystals disperse, and strain.

Components:

• half a teaspoon of borax;
• 30 grams of glue;
• 1.5 glasses of water;
• iron oxide;
• dye.

Borax dissolves in a glass of water, in a bowl prepared in advance. In a separate bowl, mix the remaining water and glue. Mix well and paint is added. To get a glowing slime, instead of the usual dye, you can add phosphor paint.

The borax solution is very carefully poured into the diluted glue, stirring constantly and gently. When the mass acquires hardness and the desired consistency, viscosity, you need to stop pouring the borate solution. The rest of it should be poured out.

Smooth out the made slime on a flat surface. Pour a small amount of iron oxide into the middle and mix well until a homogeneous mixture is formed. grey colour. The magnetic toy is ready. When a magnet is brought to the slime, it will begin to reach for it.

Why slime can not work?

• There are times when everything seems to be done according to the instructions, but the funny toy still doesn’t work out. It depends on the constituent materials that are used for the slime. All the ingredients are different from each other, and significantly. For example, different manufacturers. Because of this, the end result is completely different. Therefore, there is no need to strictly follow one or another option. The amount of materials used can vary significantly. If you didn’t manage to make a slime right away, you can try again and again. Moreover, the process does not take much time.

• A properly made slime should represent a homogeneous mass and be easily removed from the bowl in which the components were mixed.

• In the case when the toy strongly sticks to the palms and is poorly removed from the surface, it must be slightly diluted with starch or water.

Slime is an amazing and slightly strange toy. In fact, it is just a lump of elastic substance. But kids love slimes because they can be crushed, squeezed, pulled, twisted, thrown, and smeared. And after all these actions, the slime, as if nothing had happened, returns to its previous form. Even dirty traces, to the delight of parents, will not remain from such a toy.

Where did the slime come from?

For the first time, a batch of slimes was released by the American company Mattel back in 1976. The toy gained immense popularity eight years later, after the Ghostbusters, where the character Lizun was.

Since then, many have tried to make slime at home, and quite successfully. Instead of guar gum, craftsmen and inventors used a variety of substances. A homemade slime will not come out exactly the same as a purchased one, but it will definitely have “fluid” properties.

What do you need to make it at home?

Thick slime recipe with PVA glue




Dry borax should be dissolved in a glass of water. You can use a ready-made tetraborate solution, then you do not need to mix it with water. In another cup, mix the remaining water (a quarter cup) with one fourth cup of PVA. Add dye. While stirring the adhesive mass, gradually pour half a glass of borax solution into it. It remains to knead this jelly-like mass well - and a wonderful do-it-yourself slime is ready! The process is shown in more detail in this video.

Recipe based on shampoo and glue, without sodium tetraborate

It happens that there is no borax in the house, but you don’t want to go to the pharmacy to get it. The previous recipe has a popular alternative. Lizun without sodium tetraborate can be made using ordinary shampoo and Titan glue. Only this brand of glue is needed.

For three parts of glue, two parts of shampoo are taken. It is best to mix the shampoo slime in a plastic bag. When the mixture thickens, try what happened. Sometimes you have to add more glue.

Another slime recipe without PVA glue contains plasticine at the base. You will need plasticine of any color, gelatin powder, half a glass of water.

1. First you need to prepare the jelly, following the instructions on the pack. Pour it still warm and warm into a clean, separate bowl.
2. Boil 50 ml of water and switch the stove to low heat.
3. 100 - 120 grams of plasticine should be broken into pieces and gradually thrown into the water. Stir constantly.
4. When the plasticine has completely melted, gelatin will need to be added to the mass and stirred again.



Making a plasticine slime is easy, but the craft will last a maximum of two days. Plus, it will get your hands dirty. If you want to sculpt from any elastic substance, it is better to buy ball plasticine.

Many people want to learn how to make a slime without using glue. There is a way, but it is not simple. Mandatory ingredients are polyvinyl alcohol (in dry form), a glass of water, a couple of tablespoons of borax.

Polyvinyl alcohol in powder can sometimes be found under the name "Antimelitel". It is found in construction markets, in a chemical store, sometimes in haberdashery (used for dyeing fabrics).

To make a slime according to this recipe, you need to do this:

1. Alcohol powder is poured into an iron dish, put on fire.
2. Alcohol is brewed for 40 - 45 minutes. It needs to be stirred frequently. After cooking, the dishes are cooled.
3. Then you need to dissolve the dry borax powder in warm water. The crystals should dissolve within 20 minutes.
4. For three parts of polyvinyl alcohol, one part of the borax solution is taken. The mixture will soon turn into a slime.

You can tint the slime, add for smell essential oil. The licker will be durable and cute.



other methods

There are several ways to make slime at home. They are low-cost, but the resulting toys do not look very nice and are not stored for long. For example, liquid slime can be made from baking soda or starch. It will harden on the third or fourth day.

But without water and glue, it will not be possible to make a slime. You need at least one of these components. It is impossible to make a slime toy out of paper, because it does not have flexibility. Only the image of the same Lizun from Ghostbusters can be paper.

But to create a slime that glows in the dark, everyone is quite capable. To do this, you just need to add fluorescent paint to the usual composition. It is sold in craft stores.




After the release of the fantastic film "Ghostbusters" in the United States, clever manufacturers of goods for children decided to earn extra money on the popularity of one of the characters and put a toy called a slime on sale.

It is a sticky, jelly-like substance that can change its shape, stick to any surface, and slide ridiculously off a vertical wall. The game quickly won the love of kids and appeared on the shelves of children's stores around the world.

The popularity of the original fun has long surpassed its on-screen prototype and still causes genuine delight of the children, even those of them who have never watched a famous movie. Now the slime has several names - “liquid plasticine”, “gum for hands” or just handgam.

Creating it yourself in 5 minutes is not difficult. For those who want to have fun with their child, we will tell you a few simple ways to make a slime with your own hands.

At industrial production hendgam, it contains chemical components that can adversely affect the health of the child. Cause allergy or poisoning if ingested. At home, it is better to use available ingredients that are safe for the health of the baby.



The easiest way to make slime without sodium tetraborate is to use baking soda and dishwashing liquid:

1. In a bowl, mix dishwashing liquid and baking soda. Add dry and liquid parts until the composition becomes thick and sticky.
2. If the result is too dense, you can add water. But be careful with the dosage, otherwise you will have to add chemistry and soda again.
3. In order for the slime to acquire color, drip food coloring, dissolving it in a small amount of liquid.

Note! Make a slime like this simple recipe can even Small child, but you do not need to leave him alone for this activity. Remember that you should not allow the baby to come into contact with household chemicals on their own.

There are many options for replacing tetraborate in the manufacture of “gum for hands”. Want to experiment and make your own slime at home? We'll show you how to do it step by step.

How to make slime from plasticine?



To make a bright and relatively durable toy, use ordinary children's plasticine, a little edible gelatin and plain water:

• Soak a bag of gelatin in a glass of cool water. It is better to do this in a metal bowl, because when the gelatin swells, it will need to be heated on the stove.
• Bring the mixture to a boil and remove from heat. Cool until warm, stirring constantly with a spoon so that the gelatin does not freeze.
• Heat up a block of plasticine in a water bath until it becomes as soft and viscous as possible.
• Combine gelatin and slightly cooled plasticine.
• If necessary, add water to better combine the components.
• Stir with the plastic spatula from the sculpting kit until the mass is smooth.
• Until completely cooled, place the "gum for hands" in the refrigerator in a closed container.

How to make a slime out of toothpaste?



A very simple way, which produces a soft and pliable mass, which is so interesting to play with:

• Dial a full tablespoon of toothpaste and the same amount of liquid soap.
• Mix the ingredients in a small bowl and add five tablespoons of flour.
• The proportions can be changed depending on the density of the components.
• Stir until you get the desired consistency.
• Moisten the finished slime with water - so it will keep its shape better.

Advice! All varieties of toys, regardless of composition, should be stored in the refrigerator in a closed container. This is necessary, since at room temperature the slime can quickly become unusable.

How to make slime from starch?



You will need potato starch, PVA glue, dye and water:

• Add enough starch to 100 ml of warm water to make a thick mixture. Do not forget to mix vigorously, otherwise lumps may form.
• Pour in PVA glue. Mix thoroughly again.
• To add color, you can add a couple of drops of food coloring. If you do not do this, you will get a toy of a beautiful milky shade.

Advice! To prevent the mass from sticking to the dishes and for better kneading, transfer the composition to a tight plastic bag.

How to make a slime out of washing gel?

If you use a thick liquid gel to wash clothes, you can also use it to make a “homemade” handgum:

• In a quarter cup of liquid stationery glue, add a small amount of dye and mix with a plastic spoon.
• Pour 50 ml of washing liquid there.
• Mix and knead until the mass becomes elastic.
• Store in a bag at a low temperature.

Advice! To ensure that the components of the composition do not stain the skin and do not stick to your hands, use rubber gloves.

How to make slime from soap and boric acid?



Do you have a solution of boric acid and laundry soap at home? These are the main components for a dense "liquid plasticine" with excellent viscous properties:

1. Using a knife, gently cut the soap into thin sheets. It will take about 1/4 of the whole bar.
2. We make a soap solution by pouring chips with 50 ml of hot water.
3. Pour in one teaspoon of boric acid solution.
4. Add clerical glue, which contains silicate.
5. Knead the mass until thick and knead the finished material with your hands, using protective gloves.

How to make a slime from sodium tetraborate with your own hands?

Do you want to get a toy "like from the store"? Then you can not do without sodium tetraborate. This complex name hides the usual borax, which can be easily purchased at any pharmacy.

Here is a simple recipe for making real liquid clay at home:

• Place 30 ml of pva glue into a plastic container.
• Pour half a teaspoon of borax powder there and mix thoroughly.
• For elasticity, add a few drops of glycerin.
• Stir until thickened, then remove the lump from the container and continue kneading with your hands.



This is the basic handgum recipe. You can diversify it:

• By adding dye - to give a bright color of the desired shade.
• Pouring in silicate glue, instead of PVA, you get a toy of a delicate transparent look.
• Replacing glue with polyvinyl alcohol is a more difficult option, but the result will most closely resemble a purchased counterpart.
• Instead of the usual dye, you can add fluorescent paint, and the slime will glow beautifully in the dark.
• By pouring finely dispersed magnetic powder, you will make a magnetic handgam that can attract small metal objects to itself.
• If you want the slime to not only look beautiful, but also have a pleasant smell, drop a liquid flavor, such as vanilla extract, which is used for baking.

Note! When making "chewing gum" with alcohol, remember that the toy can ignite if it gets into an open fire. Be careful and follow the safety rules.

What to do if the slime does not work?

Despite the fact that preparing hendgam is quite simple, in this matter, like in any other, experience and skill play a big role. The correct slime should be a homogeneous, plastic mass that easily changes shape and does not stick to your hands. There are two difficulties that beginners face when trying to make "liquid clay" on their own. Let's look at what these problems are and how to solve them.

A funny toy is not only for fun. "Liquid plasticine" develops well fine motor skills hands, helps to cope with attacks of aggression, calms nervous system child.

And this fun also has an applied application - if you run a well-kneaded sticky material over a computer keyboard, you can easily remove all dust and small dirt from it between the buttons.

Useful video

Similar posts