home floors

Do-it-yourself shed from a profile pipe. How to make a shed from corrugated board Frame for a shed from a profile pipe

A barn is that outbuilding, without which the owner of the land plot cannot do.

It will securely cover garden tools, tools, furniture and other necessary things. barn out profile pipe, built with your own hands, a good solution for a zealous owner.

It is easy to weld it from improvised materials or buy it ready-made and assemble it on the spot.

Advantages and disadvantages of outbuildings from a profile pipe

A shed made of a profile pipe at a cost differs little from a wooden one and is much cheaper than a brick one. The purpose of the outbuilding may be different. The pros and cons of a metal structure should be considered in terms of its use.

Advantages of buildings from a profile pipe:

Reliability. A frame made of a profile pipe, installed on a flat and dense base, will last for decades without deformation. It will hermetically cover the contents from atmospheric moisture, street dirt. Neither rodents nor intruders will penetrate into it.
High fire safety.
Aesthetics. Finished samples offer multiple design solutions. If the barn is supposed to fit into the landscape of the site, then the metal can be covered not only with galvanization, but also polymeric materials different color. A simple outbuilding made of corrugated galvanized steel will look neat and will not lose its appearance from exposure to precipitation and temperature changes.
Profitability. Construction, especially if you assemble the structure with your own hands from improvised material, will be inexpensive. The finished building will not require expensive maintenance.

Ready-made sheds offered by manufacturers are sold unassembled. They don't take up much space in the package. The assembly is carried out on bolts and is within the power of any owner. To build a collapsible version of a barn from a profile pipe, you do not need to be able to handle a grinder or a welding machine.

Disadvantages of outbuildings made of metal:

Freezing. If it is not supposed to keep living creatures in the barn, then this minus can be ignored. Materials that are forbidden to be frozen cannot be left for winter storage in a shed made of a metal profile. For example, oil paint.
metal rusting. To remedy this shortcoming, all structural elements the barn should be inspected annually and treated with anti-corrosion protection of the place where the galvanization or polymer coating is damaged. If this homemade version, then it is enough to tint or coat the metal with a primer in time.

Note! A metal barn can be used as a garage. To do this, it is equipped with sliding doors.

Technologies for the construction of sheds from profiles

A shed from a profile pipe can be made stationary or mobile. In the first case, the building is installed on a concrete base, with the racks poured. In the second case, you just need a flat area, the metal strapping will serve as a support base.

Construction begins with the development of the project. It indicates the dimensions, parameters of the profile pipe and the amount of material. The assembly of the frame is carried out according to the drawing.

In the case of a do-it-yourself barn, the drawing is drawn up independently.

In the case of a ready-made version (mobile), a ready-made assembly scheme is received complete with the shed itself.

Capital barn

The capital structure requires a careful choice of location, since it is impossible to dismantle it without destruction. The barn is installed in a dry place, which is not flooded with melt water. The approach to the doors is made convenient for large items.

Note! A foundation for a profile barn is not required, since the construction is light and stable due to the metal frame. The choice of a profile pipe depends on the size of the future barn.

The larger the building, the larger the pipes required for the frame. For the construction of a stationary barn from a profile pipe, a grinder and welding machine(enough household, from alternating current). For mounting the casing - a drill or a screwdriver.

A capital shed from a profile pipe on a concrete base is built according to the following scheme:

Mark the place of the corner posts according to the dimensions.
After checking the diagonals, corner posts are concreted with their penetration into the ground by at least 60 cm. If the shed is supposed to be long, then there may not be 4 posts in the corners, but 6 or 8 with additional ones in the middle of the wall. Work continues after the solution has completely solidified.
The horizontal lower trim is welded, marking its location with a level and twine. You can reinforce the base with angled corners at 45 degrees by connecting them between the base and the bottom strapping.
Pouring concrete base.
Weld the middle and upper horizontal strapping.
Weld roof structures.
Install additional elements under doors, windows, ventilation openings.
Sheathe the frame with a profile sheet.

Note! When installing a home-made barn from a profile pipe on a base of wooden logs or gravel, the lower trim is made reinforced. Use a profile or corner with a wall of at least 4 mm.

mobile shed

To work, you will need cap or open end wrenches of appropriate dimensions, a screwdriver for mounting the casing.

The assembly technology is as follows:

installation is carried out from the bottom up, starting from the square of the base;
collect the bottom strapping;
install vertical corner posts;
mount the upper horizontal trim with the installation of racks for the door;
install guides for the roof;
install wall cladding;
cover the roof;
install doors.

Assembling a mobile shed by professionals takes no more than 2 hours. Such a structure can be installed for the season, and dismantled in the winter.

Features of prefabricated structures

Ready-made prefabricated sheds from a profile pipe are in steady demand. This is a convenient and inexpensive option for a barn or change house for summer residents. It can also be installed on personal plot and use all year round.

Ready-made mobile sheds are lightweight in design. These are small boxes, usually made of aluminum profile or thin (wall thickness 0.5 mm) galvanized steel. To install them, you need a flat horizontal platform, without differences in ground height. good option is a raised gravel base.

The difference between a prefabricated barn is that it is assembled using fasteners, corners, holders. Sheathing is attached with metal screws with special polymer gaskets. These gaskets act as a sealant.

Note! Finished outbuildings are sold, mostly without a floor. When buying such a model, you will have to take care of the floor device separately.

Do-it-yourself barn construction

The capital metal shed on the site is used not only for storing garden tools. The building can be used as a hayloft, feed storage, a full-fledged garage. Inside can be equipped viewing hole or cellar.

The simplest design of a metal profile barn is a rectangular hangar with a shed roof. The structure is reliable, functional and uncomplicated in execution.

Other examples and barn diagrams from the profile:

For the construction of a barn measuring 6.5 × 4 with a pitched roof, you will need:

metal pipes with a diameter of 61 mm - 32 m;
profile with a wall of 2 mm, dimensions 60 × 40 - 21 m;
profile with a wall of 2 mm, size 40 × 20 - 156 m;
corrugated board on the roof 8 sheets of 4 m;
corrugated board for walls 4 sheets of 2.15 m each (on a low wall under a slope);
corrugated board for walls 16 sheets of 2.5 m;
cement for concreting racks and floors;
self-tapping screws for sheathing;
electrodes for alternating current.

Work begins with the installation of corner, side racks of the frame. The barn will be oriented along the length. Racks 11 pieces. The front wall is high, the slope along the back wall. Racks are cut and concreted, taking into account the lowering of the height of the barn. The front 4 are cut into a length of 3.1 m. The distance between the middle front pillars is made to the width of the future door.

If you plan to use a shed for a garage for a car, then the door is installed without vertical posts along the front wall. Nice to have sliding doors. They can be bought ready-made, or can be ordered for individual execution.

3 vertical racks are installed along the back wall, length 2.75 (taking into account the depth of 60 cm). The side ones are concreted along the fishing line, which is pulled between the front and rear corner posts. On each side, 2 additional vertical posts are concreted.

Note! When building a barn (not for animals), do not approach the borders of an adjacent plot by more than 1 meter. It is this distance that SNiP and the law require to retreat. If you plan to place in it, for example, rabbits or chickens, then the distance should be at least 4 m.

A large profile is used for the base of the roof (top trim). The smaller profile pipe is designed for two side trims and one lower one. From the same profile, load-bearing trusses for the roof are cooked.

They require 3 pieces. Assemble guides for the roof on the ground. Two pipes of 6.5 m are connected with crossbars every 60 cm. They are lifted and welded to the upper trim.

The distance between the guides and side beams is 1 m.

After assembling the body, the structure should be primed or painted to protect the metal from corrosion.

After that, proceed to the arrangement of the floor. There are two options - concrete or wood.

Concrete floor installation:

along the perimeter of the barn, a formwork of boards is installed, stepping back 10 cm to the outside;
in the middle, wooden slats are installed (on bricks), which are equal in height with the lower trim;
pour the floor with a solution of the brand 250 m, equaling it to the internal beacons.

After the base hardens well, proceed to sheathing the barn with a profiled sheet.

Roofing iron is laid on the roof.

After that, the walls are sheathed. The joints at the corners can be closed with a corner.

The result is a spacious room with a usable area of 26 m².

Source: https://InfoTruby.ru/svoimi-rukami/saraj-iz-profilnoj-truby

Barn made of metal (corrugated board): manufacturing process with photo

A barn is a building necessary in a private courtyard in the city and in the village. You can't do without it in the country. Gradually, more and more tools, equipment, building materials are accumulated that need to be stored somewhere.

A safe shelter for all these things is a metal shed. If you know how to weld metal, it will not be difficult for you to make it yourself. It is obtained at a cost approximately equal to wood, and much cheaper than brick.

Iron barn construction technologies

There are capital metal sheds, and there are prefabricated ones. A capital iron shed may have a concrete floor, which is poured onto a prepared base, or maybe a wooden one.

If a floor is planned from boards, the upper trim on which it will rest is made of a thick-walled profile pipe with a section of 60 * 60 mm or 60 * 40 mm or a corner with a wall thickness of 4-5 mm or more. Floor logs are attached to the strapping.

They can also be metal, or they can be wooden.

In a small metal shed, you can also make a floor without a log. To do this, the harness can be made from a corner with a thickness of about 4-6 mm and a side of at least 10 cm.

Use the corner shelf as a support for boards. Only the board must be at least 40 mm thick. Large spans may require additional support.

It can be made from a profile pipe of the appropriate section.

Metal shed with wooden floor

A prefabricated / collapsible metal shed consists of separately welded wall frames that are bolted together. Sheathing is most often a profiled sheet, which is quickly mounted and removed.

The roof is made of the same material. You can install such a structure in the country in a couple of hours as well as dismantle it.

They are placed for the season in unguarded dachas, and then they are either hidden under lock and key, or taken away to winter quarters.

There is another option for a prefabricated barn (they are also called “hozblok”) - for those who do not want to mess with manufacturing. The industry produces ready-made kits that are assembled as a designer.

There are Chinese-made options, there are domestic ones. The difference in price is not catastrophic 20-30%. And what you trust more, then choose.

The assembly of one of the Russian iron collapsible sheds is shown in the video.

How to make a fence from corrugated board, read here, and the installation of a fence from a chain-link mesh is described in this article.

Do-it-yourself metal shed from a profiled sheet: photo

They were built from pipes of different sections and corrugated board, with a pitched roof. The dimensions of the barn are 6.5 * 4 meters, the height of the front wall is 2.5 m, the back wall is 2.15 m. The floor is made of concrete: in winter there will be nothing but a tool and a warm floor is useless.

materials

Racks from round pipes with a diameter of 61 mm. They were chosen because they were on the farm. Strapping and intermediate racks from a rectangular pipe - profile (60-40 mm and 40 * 20 mm). Wall thickness everywhere - 2 mm.

Consumption through pipes: round 32 m, profile of a larger section - 21 m, smaller - 156 m. Roof decking MP-20 took 4 sheets 3.5 m long, and 4 - 4 m each, galvanized intake C8 - on the walls - 4 sheets 2.15 m each, 16 sheets 2.5 m each. This is a list of frame materials. And also fasteners and consumables for concreting:

16 bags of cement;
7 tons of gravel;
waterproofing (1 roll);
self-tapping screws, rivets, electrodes for welding;
Wooden slats on the crate: 50 * 25 mm - 3 pcs. 6 meters.

The list of building materials is impressive. But at a price such a barn is still cheaper than a brick one.

Step by step construction

Start of work - marking the site. Pegs are driven in in the corners, diagonals are checked. If they are even, the twine is stretched, the installation sites of the racks are marked along it. In the marked places, shafts 60 cm deep were made with a drill. Pipes are exposed in them and poured with concrete mortar (M200).

First exposed and poured racks in the corners. When the concrete had set a little, fishing lines were tied to them - above and below. The rest followed suit.

Pipes exposed and concreted

The next step is welding the frame. A pipe 60 * 40 mm with a wall thickness of 2 mm is welded along the top of the pipes. Next, on one of the pipes in the corners, we mark the level of the floor. With the help of a hydraulic level, we transfer it to the rest of the corner posts.

At these marks we tie the twine and transfer them to all racks. According to the marking, we weld a pipe 40 * 20 mm around the perimeter. By the same principle, we weld the crossbars in the middle: two are definitely needed.

In order for a walk-behind tractor or a wheelbarrow to freely drive through the doors, they are made wide and high - 1.2 * 2 meters. The base of the metal shed has already been assembled with your own hands.

Frame for a metal shed

Next is the assembly of guides for the roof. We needed three farms 6.5 meters long. They were welded on the ground, then welded to opposite beams. After that, transverse pipe sections 40 * 20 mm (10 pieces) were welded. The frame of the metal shed is completely ready. The next stage is a primer - so that it does not rust.

Next, we started making concrete floors. First, formwork was installed. She was put outside the frame, stepping back 10 cm. They fixed the boards with pegs, propped them up with bricks so that the concrete would not move apart. Next, the foundation was prepared.

Crushed stone and broken bricks were driven into the ground. Killed literally - rubber mallet. A piece of brick is placed on the ground, knocked until it is almost completely hidden. This makes the base more rigid, and an even uneven surface better adheres to the ground.

Installed formwork

After that, beacons were placed on a thick solution - even slats (board 25 * 50 mm), they were leveled along the fishing line: points were marked at opposite ends of the lower trim and a fishing line was pulled between them. After checking its horizontalness, beacons-slats were placed along it.

Lighthouses were set up on a broken brick hammered into the ground

After the mortar had set on the lighthouses, they poured M-250 concrete (read about the grades of concrete and their composition here). They leveled the rule according to the exposed beacons and pipes of the lower trim, which were set at the same level.

This is what the concrete floor in the barn looks like after the mortar has set.

It is laid with an overlap of one panel on another by about 10 centimeters, gluing them together with special double-sided tape (sold in the same place as waterproofing).

It is better not to use ordinary plastic wrap: it lasts no longer than a few years - a maximum of -3-5.

Laying waterproofing starts from the bottom, moving up, gluing the panels. So it turns out that a drop that falls from above flows down to the very bottom. The strips were cut off longer than necessary and hung down a little at the edges (30 cm each) - so that water drained from them and snow did not fall into small gaps with a side wind.

Therefore, we carefully measure all the protrusions with squares, rulers, etc. When the sheet is exposed, it is screwed with self-tapping screws. They are placed in a wave - in a ledge.

So there is less chance that water will get into the hole.

With the lining of the sides, everything is about the same, only you have to cut the top sheets because of the slope. You put the first one exactly, then everything is like clockwork. The new sheet is leveled along the wave and fastened. It took about 20 screws to fasten one profiled sheet.

Do-it-yourself barn made of metal (corrugated board)

The door frame was welded from the same profile pipe 40 * 20 mm, hinges were welded on. When sheathing the door, it was removed and sewn up on a flat surface, hung already in finished form.

About device sliding gate can be read here.

The metal shed was sheathed in the corners with a metal corner. It is set on rivets. It serves for decoration, and also closes small gaps that were formed during docking at the corners.

It turned out more than a spacious building - 26 squares. It can be used to store inventory, building materials, taking part under the workshop. This is if he stands on the site near the house.

To give without security, a metal shed is a risky business, except to sheathe it on top with a tree. Then you have to fasten the wooden sheathing to the frame (pictured below).

barn with wooden paneling built on a metal frame

You can read about the construction of a wooden shed here.

We build an iron frame shed without welding: video

Not everyone knows how to use welding, but drilling holes and bolting two elements together is much easier. The video shows the entire process of assembling a decent-sized barn from a profile pipe with bolted connections. Welding used once: hinges are welded. There are no bolts here.

Source: https://stroychik.ru/hozpostrojki/saraj-iz-metalla

We build a barn from a profile pipe with our own hands: instructions, recommendations + video materials

Outside the city, a necessary building, without which it is simply impossible to do, is a barn.

In the country, he will also become an indispensable assistant for many. It is easy to make using metal, if you have at least some welding skills.

The cost of such a building is much less than that of brick ones, but it is not inferior to wooden counterparts, therefore it is profitable to build a barn from a profile pipe with your own hands from an economic point of view.

We build iron sheds with our own hands - technology

The structure can be both prefabricated and capital. There is a separate solution for those who have chosen the capital option.

Work begins with a concrete floor. It is poured onto the surface of the base, the preparation of which is carried out in advance. But the construction of wooden flooring is also allowed.

The floor from the boards requires a special approach.

It is necessary to take a profile pipe with thick walls, with a section of 60 by 40 or 60 by 60 mm.
You will also need a corner, in which the wall thickness reaches 4-5 millimeters.

Parts can be either metal or wood. They will be needed when we start building the frame of a barn from a profile pipe with our own hands.

It is possible to create a floor where there are no logs if the building has small dimensions. The harness consists of corners with a thickness of 4-6 mm, with a side of at least 10 cm. The boards will then rest on the corner shelf.

The main thing is that the thickness of the board is at least 4 cm. Additional support is needed if the span is large enough. To do this, it is enough to take a profile pipe, the diameter of which corresponds to the characteristics.

A prefabricated metal structure, like a collapsible one, is made of wall frames. They are welded separately. Bolts are used for connection.

A professional sheet is used as a sheathing. It is quickly and easily mounted by hand. The roof is also recommended to be done using a profiled sheet.

Such structures are easy not only to build, but also to dismantle if necessary. They are placed for one season in dachas, which are not additionally protected in any way.

In addition, the industry produces ready-made metal structures that can be assembled on the site, like a designer. They are produced by both domestic and foreign manufacturers, including Chinese ones.

For example, let's build a building with our own hands measuring six and a half by four meters. The front wall has a height of 2.5 meters. The back wall is slightly smaller - 2.15 m.

It is desirable to make the floor concrete. This is true if nothing is stored inside, only tools. Next, we build a barn from a profile pipe.

We take racks of steel round pipes with a diameter of 6 cm. Such pipes are easy to find in the private sector, but you can choose other diameters. A profile pipe with a rectangular section is used to create a rack with intermediate strapping.

Its diameter is 40 by 20 millimeters or 40 by 60. The walls must be the same thickness up to 2 millimeters.

Consumables will be as follows:

These materials are needed only in order to build a frame. Do not forget about fasteners for concreting and other types of consumables.

For the crate you need a set of wooden slats. They need to take 6 pieces with a length of 6 meters. The diameter should be within 5 by 2.5 centimeters.
Welding is not complete without electrodes and rivets, you will also need self-tapping screws.
1 roll of materials with waterproofing properties is required.
Gravel in the amount of 7 tons.
Cement, in 16 bags.

This is part of the answer to the question of how to build a barn from a profile pipe.

Instructions on how to build a barn with your own hands

Work begins with marking on the site. In the corners, you need to drive in pegs, and then check the diagonal. The twine can then be pulled only if everything turned out to be even.

This detail is important for marking the places where the racks will be installed. Mines up to 60 centimeters deep are made in places marked with a drill.

They expose metal pipes. We take a concrete mortar of at least M200 brand, we fill everything.

Racks are poured in the corners immediately after exposure. Fishing lines are tied to them when the concrete hardens a little. They should be both below and above. The rest are leveled by the first parts fixed in place.

Next, the metal frame is welded. A 60 x 40 mm pipe is welded at the top of the structure. Its wall thickness is 2 mm. On the corner pipes, it is necessary to mark the level where the floor will be.

We use the hydraulic level to transfer marks to other parts of the structure. Based on these marks, the twine is tied. Then everything is transferred to other racks.

A pipe 40 by 20 millimeters is tied around the perimeter, the main thing is to match the markings. The crossbars in the middle are welded in compliance with the same principle. You will definitely need two pipes. At this stage, the metal frame for the barn can already be considered assembled.

Building on - the next steps

Then do-it-yourself guides for the roof are assembled. At first metal structure welded on the ground, and then attached to beams that are opposite each other.

After that, you need a primer, it will help the barn not to rust.

A concrete floor is prepared separately. It all starts with the installation of formwork. It is exposed outside the frame, stepping back 10 cm. The boards are fixed with a peg. And they prop it up using bricks. Then the concrete will not put pressure on the structure, push it apart.

Broken brick or crushed stone is driven into the prepared site.
An ordinary mallet is also suitable for this.
We lay a broken brick on the surface of the soil and drive it into the ground.
The result is a more rigid foundation. In addition, after this, the adhesion between flat ground and the ground is improved.

The beacons are exposed to the solution, which is still thick. These are flat slats in the form of boards, with a diameter of 25 by 50 mm. They are leveled on a special fishing line.

We mark several points at the ends of the strapping below, located on opposite sides. Between them you need to stretch the fishing line. Beacons-panels are set along it after the horizontalness is checked.

What other steps are needed to build a barn from a profile pipe?

You need to wait a bit until the solution on the surface of the beacons becomes dry. Then everything is poured with concrete, grade M-250.

Watch the video

They proceed to do-it-yourself installation of sheathing from a profiled sheet. It is better to start with the main part of the roof. Laying a film with waterproofing properties is the first step, then the water will definitely not get on the head.
First there is one panel, and on it - the next. Step - 10 cm. For gluing, use adhesive tape with two sides.
Waterproofing spreads gradually, starting from the bottom and ending with the top.
The next step is the installation of the profiled sheet itself. The main thing is to set the first sheet correctly, this applies to any sheet material. Further work in this case it will be easy and smooth. For measurements, squares, rulers and so on are used.
The sheet is screwed with screws after it is exposed.
Approximately the same principle is followed when it comes to side trim.

It can take up to 20 screws to fasten one sheet.

What's in the final stages?

A frame for a door is welded from a profile pipe 40 by 20 millimeters (learn how to weld professional pipes correctly - video instructions). Loops without welding cannot be attached to the structure either.

The door can be sheathed separately from the rest of the details, and then hung ready-made.
The barn is sheathed around the edges with a metal corner. The leaf itself is planted on rivets.

As a result, the room turned out to be 26 square meters. This is more than an impressive area. As you can see, building everything with your own hands is not so difficult.

About some features of construction

The metal profile is most often used for shed upholstery, instead of boards. The material is easier to install, compared to its counterparts, it is more durable and more affordable.

But more rigidity sometimes gives all the same plank upholstery. It would be nice to strengthen the frame by installing jibs if the metal profile spans in the sheds are large enough.

For the metal profile and its fastening, special washers are needed - galvanized, with additional linings. But you can also put ordinary varieties if the above details are not available.

Watch the video

Corner elements are also needed special. It is recommended to lay the roof itself on the gasket. Otherwise, during the rain there will be a lot of unnecessary noise.

When connecting metal to a metal profile, they resort to using ordinary self-tapping screws, with heads similar to the tip of a drill. These drills need to drill both parts.

The main thing is to use a good screwdriver with sufficient power. Sometimes a hole is drilled first, and then a sheet with a self-tapping screw is fixed.

A barn from a profile pipe with your own hands will be ready quickly. Watch the video materials presented by us, and it will not be difficult to build everything with your own hands. Below are the drawings.

Outside the city, a necessary building, without which it is simply impossible to do, is a barn.

In the country, he will also become an indispensable assistant for many. It is easy to make using metal, if you have at least some welding skills.

We build iron sheds with our own hands - technology

The structure can be both prefabricated and capital. There is a separate solution for those who have chosen the capital option.

Work begins with a concrete floor. It is poured onto the surface of the base, the preparation of which is carried out in advance. But the construction of wooden flooring is also allowed.

Plank flooring requires a special approach.

It is necessary to take a profile pipe with thick walls, with a section of 60 by 40 or 60 by 60 mm.
You will also need a corner, in which the wall thickness reaches 4-5 millimeters.

Parts can be either metal or wood. They will be needed when we start building the frame of a barn from a profile pipe with our own hands.

It is possible to create a floor where there are no logs if the building has small dimensions. The harness consists of corners with a thickness of 4-6 mm, with a side of at least 10 cm. The boards will then rest on the corner shelf.

The main thing is that the thickness of the board is at least 4 cm. Additional support is needed if the span is large enough. To do this, it is enough to take a profile pipe, the diameter of which corresponds to the characteristics.

Metal body and wooden floor

A prefabricated metal structure, like a collapsible one, is made of wall frames. They are welded separately. Bolts are used for connection.

A professional sheet is used as a sheathing. It is quickly and easily mounted by hand. The roof is also recommended to be done using a profiled sheet.

Such structures are easy not only to build, but also to dismantle if necessary. They are placed for one season in dachas, which are not additionally protected in any way.

We build a barn using a metal profile

For example, let's build a building with our own hands measuring six and a half by four meters. The front wall has a height of 2.5 meters. The back wall is slightly smaller - 2.15 m.

It is desirable to make the floor concrete. This is true if nothing is stored inside, only tools. Next, we build a barn from a profile pipe.

Its diameter is 40 by 20 millimeters or 40 by 60. The walls must be the same thickness up to 2 millimeters.

Consumables will be as follows:

These materials are needed only in order to build a frame. Do not forget about fasteners for concreting and other types of consumables.

For the crate you need a set of wooden slats. They need to take 6 pieces with a length of 6 meters. The diameter should be within 5 by 2.5 centimeters.
Welding is not complete without electrodes and rivets, you will also need self-tapping screws.
1 roll of materials with waterproofing properties is required.
Gravel in the amount of 7 tons.
Cement, in 16 bags.

This is part of the answer to the question of how to build a barn from a profile pipe.

Instructions on how to build a barn with your own hands

Work begins with marking on the site. In the corners, you need to drive in pegs, and then check the diagonal. The twine can then be pulled only if everything turned out to be even.

This detail is important for marking the places where the racks will be installed. Mines up to 60 centimeters deep are made in places marked with a drill.

They expose metal pipes. We take concrete solution brand at least M200, fill everything.

Racks are poured in the corners immediately after exposure. Fishing lines are tied to them when the concrete hardens a little. They should be both below and above. The rest are leveled by the first parts fixed in place.

Next, the metal frame is welded. A 60 x 40 mm pipe is welded at the top of the structure. Its wall thickness is 2 mm. On the corner pipes, it is necessary to mark the level where the floor will be.

We use the hydraulic level to transfer marks to other parts of the structure. Based on these marks, the twine is tied. Then everything is transferred to other racks.

Building on - the next steps

Then do-it-yourself guides for the roof are assembled. First, a metal structure is welded on the ground, and then attached to beams that are opposite each other.

After that, you need a primer, it will help the barn not to rust.

Broken brick or crushed stone is driven into the prepared site.
An ordinary mallet is also suitable for this.
We lay a broken brick on the surface of the soil and drive it into the ground.
The result is a more rigid foundation. In addition, after this, the adhesion between flat ground and the ground is improved.

The beacons are exposed to the solution, which is still thick. These are flat slats in the form of boards, with a diameter of 25 by 50 mm. They are leveled on a special fishing line.

What other steps are needed to build a barn from a profile pipe?

You need to wait a bit until the solution on the surface of the beacons becomes dry. Then everything is poured with concrete, grade M-250.

Watch the video

They proceed to do-it-yourself installation of sheathing from a profiled sheet. It is better to start with the main part of the roof. Laying a film with waterproofing properties is the first step, then the water will definitely not get on the head.
First there is one panel, and on it - the next. Step - 10 cm. For gluing, use adhesive tape with two sides.
Waterproofing spreads gradually, starting from the bottom and ending with the top.
The next step is the installation of the profiled sheet itself. The main thing is to set the first sheet correctly, this applies to any sheet material. Further work in this case will be easy and smooth. For measurements, squares, rulers and so on are used.
The sheet is screwed with screws after it is exposed.
Approximately the same principle is followed when it comes to side trim.

It can take up to 20 screws to fasten one sheet.

What's in the final stages?

From a profile pipe 40 by 20 millimeters, a frame for the door is cooked (). Loops without welding cannot be attached to the structure either. The door can be sheathed separately from the rest of the details, and then hung ready-made.
The barn is sheathed around the edges with a metal corner. The leaf itself is planted on rivets. This is necessary not only for decorative decoration, but also for closing any possible cracks.

As a result, the room turned out to be 26 square meters. This is more than an impressive area. As you can see, building everything with your own hands is not so difficult.

About some features of construction

The metal profile is most often used for shed upholstery, instead of boards. The material is easier to install, compared to its counterparts, it is more durable and more affordable.

But more rigidity sometimes gives all the same plank upholstery. It would be nice to strengthen the frame by installing jibs if the metal profile spans in the sheds are large enough.

For the metal profile and its fastening, special washers are needed - galvanized, with additional linings. But you can also put ordinary varieties if the above details are not available.

Watch the video

Corner elements are also needed special. It is recommended to lay the roof itself on the gasket. Otherwise, during the rain there will be a lot of unnecessary noise.

When connecting metal to a metal profile, they resort to using ordinary self-tapping screws, with heads similar to the tip of a drill. These drills need to drill both parts.

The main thing is to use a good screwdriver with sufficient power. Sometimes a hole is drilled first, and then a sheet with a self-tapping screw is fixed.

The word barn in Turkish means palace. In our understanding, this is an auxiliary detached building intended for household needs. The need to have such a room makes us think about how to build it quickly and at the lowest cost. We propose to build a barn without the involvement of craftsmen, i.е. on their own, using profiled metal as material for walls and roofs.

Calculation of the cost of a barn from a profiled sheet

We will build a barn on an unprepared site and with our own hands, which means that only the cost of materials is included in the estimate. For a corrugated shed you will need:

cement, crushed stone, sand, rebar or metal rod;
sheet metal;
supports for fastening the profiled sheet;
profiled pipe for transverse and roof mounting;
insulation;
electrodes;
corrugated board and hardware for fasteners;
skates, corner bars.

We use standard tools for installation.:

mixer for concrete;
electric scissors, drill, screwdriver, impeller, riveting device;
welding machine;
measuring accessories.

The bulk of the costs are borne by 2 positions: profile pipe and corrugated board. For the installation of walls, we use the most economical version of the facade corrugated board -, and for the roof. Profiled metal is chosen by such parameters:

appointment (front /);
zinc content;
sheet thickness;
profile height;
type of polymer coating, its thickness and color.

Ideally, a professional sheet is suitable for us:

for walls - Bulat 10 0.4 mm thick with a polymer coating, color RAL 7024.
for roofing - 0.45 mm thick with polymer coating, color RAL 7024.

A profile pipe will be needed in two sizes 40X20 for the connecting elements of the frame and 80X80 for the base. The cost of the rest of the material is 1/5 of the total cost.

Construction order

Decking has many characteristics that allow it to be used in the construction of structures, but there are limitations that must be taken into account in the design, even if we are building a barn.

We draw a sketch so that the slope of the slopes is at least 15 °. The plumb lines of the roof protrude 30 cm beyond the perimeter of the walls. We equip the entrance with double-leaf gates made of profiled sheet, opening outwards. We will make natural ventilation in the barn.

foundation, supports

We begin the process by leveling the site and removing soil 10-15 cm thick to clay soils and 15-30 cm for chernozems. We mark the perimeter and dig trenches along it for the strip foundation. The weight of the structure is small and the load extends to the supports, so we will not make the foundation deep. Its main function is waterproofing the room.

In the dug trench at the installation sites of the supports, we make holes 1 meter deep, install in them pre-prepared supports from a profile pipe with a wall side of 80 mm. We weld a heel of sheet metal measuring 30x30 cm to one of the ends. We set the supports along the plumb line and along the axis of the trench. For the reliability of the foundation, we connect several supports with a rod. We fasten to the poles with wire. We put the formwork from boards 20 cm high above the level of the planned floor and fill it with concrete. We prepare the solution in the proportion of 1 part cement grade 400, 3 parts sand, 3 parts crushed stone.

The foundation is ready for further work a week after pouring. In order not to waste time, we make a concrete floor screed. We proceed to the installation of the frame.

Roof and wall installation

We cut the pipe for transverse fasteners. We weld between the supports so that there is one plane along the facade. We will lay the corrugated sheet on the outside in a continuous way, and inside in sections that form the supports. We connect the upper ends of the supports around the perimeter. We put 2 logs in each section if the height is up to 2.5 meters and 3 if it is higher.

After welding the frame of the walls, we move on to the roof. With the help of beams we connect opposite supports installed along the length of the shed. We use a pipe 80x80 if the spans are more than 3 meters, and 40x40 if less. We choose the total length of the beam so that it protrudes beyond the perimeter of the shed by 300 mm on each side, forming an overhang. In the center of the span, we weld vertical racks, with a height that forms the desired slope. We do the calculation for a right triangle through the known leg (half the length of the beam or the width of the barn, taking into account the overhang) and the angle we need.

H \u003d K x Tg (15 ° or another angle), where H is the height of the rack, K is half of the beam, Tg is the tangent of the angle (calculated from tables or in any calculator).

We connect the racks with the ends of the beams, forming rafter leg. The farm needs to be strengthened with reinforcement ties. We cut the rod so as to connect a right angle with the rafter, dividing it in half. Then, with another segment, we connect the previously welded piece to the beam. We install transverse stretch marks, which will serve as a crate at the same time. We use a profile pipe 40x20 mm long equal to the length of the roof. We connect the beams with similar elements. We weld extensions overlapped from above. We make the distance between rows 500 mm. We will attach the corrugated roofing to these elements after installing the waterproofing film.

We will use the extreme trusses as the frame of the pediment. To do this, instead of reinforcing reinforcement, we divide the rafter into three parts and install vertical jumpers between it and the horizontal beam. We make racks from a profile pipe 40x20. We paint the entire structure.

To protect against moisture and condensation between the rafters, we roll out the roofing film. We start laying from the overhang to the top. We mount each new layer with an overlap.

The length of the corrugated sheet is determined by the length of the roof slope. We order sheets of the required length from the manufacturer. The first sheet is laid with a ledge on the pediment. We mount the next one with an overlap.

We fasten into the lower wave with painted metal screws (screws 25 mm long) with rubber seals. We screw in the screws strictly perpendicular to the crossbars in order to avoid distortion and, as a result, leakage of the roof. One more important detail is the correct screw tightening density. Excessive pressure of the self-tapping screw can cause damage to the corrugated board coating and subsequent corrosion. Insufficient fit will encourage moisture to enter.

We install the skate, screwing it with screws into the upper wave. We use screws with a length of 75 mm. We install all self-tapping screws through one wave. Let's move on to the front.

We cut the sheet in an angular shape with the help of electric scissors. We will lay horizontally, so we start from the bottom. Fasten with screws to uprights extreme farm. We mount the next sheet with an overlap. We fasten an angular profile to the roofing, which prevents the sheet from being torn off in strong winds. We fasten it in the same way as a ridge, screwing screws (75 mm) into the upper wave from the side of the roof and gable.

Installing a profiled sheet from the front and inside of the barn

The first step is to mount the facade. Leaves are placed vertically. The first is set from the corner. We fasten to the crossbars. We mount the next overlap on one wave. We connect the corner sheets with a special profile bar. We fasten the corrugated board to the lower wave, and the corner to the upper one. Self-tapping screws are installed through the wave into each cross member.

We turn to the inner lining, initially installing the insulation. We use sheet foam with a thickness of 40 mm. We cut to size the sections formed by the uprights and crossbars. We attach to the back side of the installed profiled sheet using double-sided tape or adhesive tape. We mount the same insulation under the roof in sectors formed by rafters and stretch marks. We finally fasten the foam plastic to the stretch marks with the help of a lath crate.

Let's move on to the interior. We will mount between the supports, since these elements can be used for arranging shelves, fastening various devices and other things. We sheathe the ceiling in the same way, using stretch marks previously installed on the beams for fastening.

The corrugated board is attached in the same way as on the facade. Cut along the length with scissors for metal. We fasten with self-tapping screws with an overlap on one wave. We conduct electrical wiring according to the profiled sheet in protective boxes or sleeves. For installation, we use profiled sheet fasteners. We turn to the manufacture of double-leaf swing gates.

Gate to the barn from profiled sheet

The fastest way to manufacture is to form the structure in place. What do we mean?
Gates are made in the following sequence:

Between the supports at the bottom and at the top we mount by welding 2 jumpers with an indent from the foundation up to 5 cm;
We connect the installed jumpers with 4 racks. 2 are placed closely along the supports, and 2 - along the axis of the gate;
We weld hinges to the supports and 2 racks;
Using a grinding and cutting machine (turbine), we cut horizontal jumpers in 6 places. Between posts fixed along the axis (middle) of the gate and between supports and posts on which hinges are welded. We bring the cut points to the same plane with the racks and grind. We received 2 sashes with hinges installed;
We weld the ears for a padlock on the middle racks and paint the structure;
We install corrugated board. We take 2 sheets and cut out the grooves for the lock. We install the first sheet on one leaf, starting from the rack, and the second on the other so that it overlaps on the first. Then we mount the rest of the sheets.

When installing the inner lining, we do not overlap the wings. We glue the perimeter of the gate with a sealant. The material is attached to the corrugated board with a sticky side, so that it protrudes by the amount of compression.

Household buildings must be functional and "convenient" to use. The construction of a barn in the country almost always comes down to the construction of not the most optimal option due to the fact that the homeowner does not imagine the full range of purposes of the object being built. Will it be used only for warehousing or for other functions?

Regardless of the exact purpose, one of the best choices is a frame shed for any purpose. Let's discuss its benefits by numbers!

One! Various sizes.

A big plus of such structures is their standardization and the availability of ready-made offers on the market. The cost of building a turnkey barn is very easy to calculate. They do not require the installation of a foundation, and therefore it is enough just to specify the required size (examples: 6x3 or 3x6, 3x2, 4x2, etc.). You can pick up both large-sized options, and small-sized ones.

Two! Versatility.

You can use the frame panel house for a variety of needs. From the storage of tools, supplies, fertilizers and feed to the placement of a subsidiary farm. It is allowed to use such outbuildings for animals and poultry.

Three! Inexpensive and high quality material.

Let's briefly go through the main advantages of wood that has undergone preliminary preparation and processing:

Low prices. The cost of wood is lower compared to most types of bricks, concretes and metals.

Little specific gravity. Prefabricated frame houses are light, do not create a load on the ground, can be transported without disassembly if necessary.

These advantages of the material make it ideal for use in Moscow and the Moscow region, where the cost of construction is high, and therefore the construction of buildings from timber and wood in general is the best choice.

Four! Rapid construction of standard objects.

You can order an economy version with a shed roof, or choose a more expensive project with a veranda, multi-layer insulation and other improvements. In this case, the standard components of the building will be offered to you in advance. It is possible to order production according to individual sizes and drawings, but this is almost always redundant. The generic models are very good.

Five! Cheap and cheerful!

If you find out how much it costs to build objects from different types of materials, a frame-panel shed will almost always win in comparison. Low price and at the same time unlimited possibilities in terms of household applications make frame sheds the best investment!

The house can be stone or wooden, one-story or multi-story. But the presence of only one residential building, albeit very comfortable and cozy, will not be enough for permanent residence outside the city. It will be necessary to store garden and agricultural tools, any blanks and other equipment, which, as a rule, are not placed in the house. Ready-made project of a barn for summer cottages from corrugated board For these purposes, a barn is required, since not a single site outside the city can do without at least one non-residential outbuilding.

For the construction of a barn, it is not necessary to involve construction companies or teams of professional workers; it is quite possible to erect it with your own hands. It can be done in many different ways and from absolutely different materials, for example, metal.

Benefits of metal sheds

Such a barn can be given an original appearance and design, it will be different the highest degree its reliability and ease of installation. Compared to barns and, it will stand out for its durability and will not require any specific knowledge and skills for construction.

An example of a prefabricated metal shed for a house or cottage

The galvanized surface is known for its reliability during operation, it will protect the metal shed from adverse weather conditions and metal corrosion, and the reinforced roof of such a structure will withstand winter snow blockages. This practical design, made by hand, will become simply indispensable in any summer cottage.

In addition, metal, unlike wood, does not allow moisture to pass through itself, which will allow you to store property in the barn throughout the calendar year and not be afraid for its safety. Such a barn can also act as a garage if a motorcycle, moped or bicycles are available. In addition, it is also suitable for storing firewood, as it will protect them from moisture and will not allow them to become damp.

Choosing a construction site for a barn

Before starting construction work, it will be necessary to choose a place where a metal shed will be built.

Site preparation and installation of a barn frame made of metal pipes Each owner determines it independently, depending on his personal preferences, based on the size of the site. If you care about the appearance of the site as a whole, it will not be advisable to build a barn in the most prominent place in front of the house. It is advisable to choose the optimal territory so that the house, if possible, blocks the barn.

At the same time, you can paint a metal building with your own hands with your favorite type of paint and in any color, which will help it merge as much as possible with the environment and harmoniously fit into the design of the site. One has only to make sure that the barn is not located in a lowland, where excess water accumulates from excessive precipitation.

Of course, many materials and tools are now available that increase resistance to undesirable weather conditions, but too frequent contact with moisture will still not benefit the building.

Slab foundation for a metal shed

General description of metal sheds

Usually, such sheds of a standard design are assembled by hand, right on the spot from metal sheets and profiles, without the involvement of craftsmen or the use of special mechanisms. When the location has already been chosen, a flat and even surface must first be prepared for the barn.

The base can be a wooden bridge or paving slabs, the main thing is to lay it evenly and, at the same time, it is necessary that the base be sufficiently rigid.

These conditions must be met in order to avoid deformation of the frame during operation, which can later lead to breakdowns and difficulties with opening and closing doors.

The frame of the shed consists of galvanized profiles that are not subject to rust and corrosion. The optimal material for such a frame is corrugated steel.

Arrangement of a shed frame made of metal profiles The standard wall thickness is usually half a centimeter, and the frame should be twice as wide.

Metal sheds for summer cottages allow you to make multi-leaf sliding doors in them with your own hands, which will be especially convenient if you plan to keep motorcycles, scooters or other vehicles in such sheds. If you do not plan to use the barn as a garage, then such doors can still come in handy, especially when you have to bring some large items into it.

In addition, sliding doors help save space, and in winter they open much easier and simpler than ordinary ones, since they do not require clearing the surrounding area from snow and ice. Do not forget about the ventilation grilles, which will help to ventilate the interior and will not allow the air to stagnate, which will also prevent the appearance of mold on the walls.

Barn with sliding doors There are models of sheds of the so-called quick disassembly. Such a do-it-yourself metal shed is distinguished by both simplicity of design and quick dismantling if necessary.

The technology of self-construction of a metal barn

If you decide to build such a barn with your own hands, then for this you will need the following tools and materials:

A variant of the project of a metal barn from a profile for self-construction

angular grinder machine("Bulgarian") and spare disks for it;
welding machine and a protective mask for safety during work;
drill;
construction drill;
measuring instruments, such as - tape measure, corner, rulers, building level;
hammer, sledgehammer;
shovel;
thick fishing line;
nail puller;
riveter;
clamps;
self-tapping screws, nails, screws;
material for waterproofing;
round and profile pipes;
galvanized corrugated board;
gravel;
cement;
wooden slats and corners.

The list of required materials and tools turns out to be quite solid, it will require appropriate financial investments, but such a do-it-yourself building will still come out cheaper than brick and more reliable than wood.

A variant of a shed made of galvanized iron sheets If everything you need has already been bought and prepared, then you can proceed to the first stage directly construction works. First you need to measure the already thought-out dimensions of the future barn on the site, and drive temporary pegs into the ground at the corners of its area.

After that, it is necessary to check the diagonal - if it completely coincides, then a thick fishing line is stretched between the driven pegs, guided by which you can drive in a few more new pegs.

Their number depends on the size of the garage area, and it will be possible to navigate in this regard already in the process of work.

After this has been done, it is necessary to make holes with a depth of 50-70 cm using a construction drill.

When the above-described do-it-yourself blanks are built, you can start making concrete mix. The optimal ratio in the manufacture will be 5 buckets of water to 1 bucket of cement.

In order not to return to this procedure many times, you can get a large number of mixtures, for example, using an old waste bath.

With the help of the resulting mixture, it is initially necessary to concrete four pipes at the corners marked at the construction site of the area. Further, the pipes can be connected with a thick fishing line, as was already the case with pegs, but this can only be done when the concrete begins to harden and the pipes begin to stand firmly in their places.

A stretched fishing line will help to quickly and accurately concrete other pipes around the perimeter. The process of solidification of concrete will be completed only after two days. When this happens, it will be possible to proceed to the next stage of construction - to weld the frame of the barn. To do this, along the entire marked perimeter, a profile pipe with thick walls will be welded to the top of the pillars.

Drawing with the dimensions of the frame of a metal shed To build a similar frame, a 60/40 or 70/50 mm pipe is suitable. Smaller pipes cannot be used under such a frame. The entire weight of the roof of the building rests on them. It is extremely important to ensure that the joints are not in the middle of the pipes, but with a slight shift to the side by about 1.5-2.5 cm, this will facilitate the work when sheathing the barn.

At the next stage, using a marker, it is necessary to make marks on the lower parts of the corner pipes, which will be the floor level. Here again, you will need a thick fishing line, which will need to connect the received marks to each other, and with the help of it, apply the same marks to the remaining pipes.

Outside the city, a necessary building, without which it is simply impossible to do, is a barn. In the country, he will also become an indispensable assistant for many. It is easy to make using metal, if you have at least some welding skills.

The structure can be both prefabricated and capital. There is a separate solution for those who have chosen the capital option.

Work begins with a concrete floor. It is poured onto the surface of the base, the preparation of which is carried out in advance. But the construction of wooden flooring is also allowed.

Plank flooring requires a special approach.

It is necessary to take a profile pipe with thick walls, with a section of 60 by 40 or 60 by 60 mm.
You will also need a corner, in which the wall thickness reaches 4-5 millimeters.

Parts can be either metal or wood. They will be needed when we start building the frame of a barn from a profile pipe with our own hands.

It is possible to create a floor where there are no logs if the building has small dimensions. The harness consists of corners with a thickness of 4-6 mm, with a side of at least 10 cm. The boards will then rest on the corner shelf.

Metal body and wooden floor

A prefabricated metal structure, like a collapsible one, is made of wall frames. They are welded separately. Bolts are used for connection.

A professional sheet is used as a sheathing. It is quickly and easily mounted by hand. The roof is also recommended to be done using a profiled sheet.

Such structures are easy not only to build, but also to dismantle if necessary. They are placed for one season in dachas, which are not additionally protected in any way.

We build a barn using a metal profile

For example, let's build a building with our own hands measuring six and a half by four meters. The front wall has a height of 2.5 meters. The back wall is slightly smaller - 2.15 m.

It is desirable to make the floor concrete. This is true if nothing is stored inside, only tools. Next, we build a barn from a profile pipe.

We take racks of steel round pipeshaving a diameter of 6 cm. Such pipes are easy to find in the private sector, but you can choose other diameters. A profile pipe with a rectangular section is used to create a rack with intermediate strapping.

Its diameter is 40 by 20 millimeters or 40 by 60. The walls must be the same thickness up to 2 millimeters.

Consumables will be as follows:

These materials are needed only in order to build a frame. Do not forget about fasteners for concreting and other types of consumables.

For the crate you need a set of wooden slats. They need to take 6 pieces with a length of 6 meters. The diameter should be within 5 by 2.5 centimeters.
Welding is not complete without electrodes and rivets, you will also need self-tapping screws.
1 roll of materials with waterproofing properties is required.
Gravel in the amount of 7 tons.
Cement, in 16 bags.

This is part of the answer to the question of how to build a barn from a profile pipe.

Instructions on how to build a barn with your own hands

Work begins with marking on the site. In the corners, you need to drive in pegs, and then check the diagonal. The twine can then be pulled only if everything turned out to be even.

This detail is important for marking the places where the racks will be installed. Mines up to 60 centimeters deep are made in places marked with a drill.

They expose metal pipes. We take concrete solution brand at least M200, fill everything.

Next, the metal frame is welded. A 60 x 40 mm pipe is welded at the top of the structure. Its wall thickness is 2 mm. On the corner pipes, it is necessary to mark the level where the floor will be.

We use the hydraulic level to transfer marks to other parts of the structure. Based on these marks, the twine is tied. Then everything is transferred to other racks.

Building on - the next steps

Then do-it-yourself guides for the roof are assembled. First, a metal structure is welded on the ground, and then attached to beams that are opposite each other.

After that, you need a primer, it will help the barn not to rust.

Broken brick or crushed stone is driven into the prepared site.
An ordinary mallet is also suitable for this.
We lay a broken brick on the surface of the soil and drive it into the ground.
The result is a more rigid foundation. In addition, after this, the adhesion between flat ground and the ground is improved.

The beacons are exposed to the solution, which is still thick. These are flat slats in the form of boards, with a diameter of 25 by 50 mm. They are leveled on a special fishing line.

What other steps are needed to build a barn from a profile pipe?

You need to wait a bit until the solution on the surface of the beacons becomes dry. Then everything is poured with concrete, grade M-250.

They proceed to do-it-yourself installation of sheathing from a profiled sheet. It is better to start with the main part of the roof. Laying a film with waterproofing properties is the first step, then the water will definitely not get on the head.
First there is one panel, and on it - the next. Step - 10 cm. For gluing, use adhesive tape with two sides.
Waterproofing spreads gradually, starting from the bottom and ending with the top.
The next step is the installation of the profiled sheet itself. The main thing is to set the first sheet correctly, this applies to any sheet material. Further work in this case will be easy and smooth. For measurements, squares, rulers and so on are used.
The sheet is screwed with screws after it is exposed.
Approximately the same principle is followed when it comes to side trim.

It can take up to 20 screws to fasten one sheet.

What's in the final stages?

As a result, the room turned out to be 26 square meters. This is more than an impressive area. As you can see, building everything with your own hands is not so difficult.

About some features of construction

The metal profile is most often used for shed upholstery, instead of boards. The material is easier to install, compared to its counterparts, it is more durable and more affordable.

But more rigidity sometimes gives all the same plank upholstery. It would be nice to strengthen the frame by installing jibs if the metal profile spans in the sheds are large enough.

For the metal profile and its fastening, special washers are needed - galvanized, with additional linings. But you can also put ordinary varieties if the above details are not available.

Video 3

Corner elements are also needed special. It is recommended to lay the roof itself on the gasket. Otherwise, during the rain there will be a lot of unnecessary noise.

When connecting metal to a metal profile, they resort to using ordinary self-tapping screws, with heads similar to the tip of a drill. These drills need to drill both parts.

The main thing is to use a good screwdriver with sufficient power. Sometimes a hole is drilled first, and then a sheet with a self-tapping screw is fixed.

A shed from a profiled sheet, as well as many other outbuildings, every home craftsman can build with minimal effort. With their own hands, such structures from corrugated board are built quickly enough and without serious difficulties.

1

Summer residents and owners of country houses build a wide variety of buildings from corrugated board. Including sheds, which are used to store garden tools and all kinds of tools. You can build such a building with your own hands according to the following scheme. First, choose a suitable site (it is desirable that the residential building is located at some distance from it), clear the site from the topsoil (50–60 centimeters deep). You draw up a plan for the barn, determine its geometric parameters and the materials that you will use.

Shed from profiled sheets

For such buildings, it is recommended to purchase 0.4 mm in thickness. Also you will need edged boards, wooden bars with a section of 10–15 cm, self-tapping screws, mounting angles, pieces of reinforcement, sheathing and insulation materials, if it is planned to carry out finishing and thermal insulation of the building from the inside. You make the foundation for the barn in the form of a concrete slab (monolithic). Take its dimensions a little more than the area of \u200b\u200bthe building being constructed. At the corners of the slab, you dig holes half a meter deep, pour crushed stone on their bottom, and ram it. Then vertically mount metal racks into the mini-pits made and fill them with a concrete mixture (3 parts of sand and part of cement).

Make formwork from boards around the perimeter of the slab. For these purposes, you can use boards with a width of about 0.8 m. Please note that the racks mounted earlier must be inside the formwork. Now you fill the structure of the boards with concrete, getting both the floor of the barn and its foundation at once. After the base has solidified, you proceed directly to the construction of the planned building with your own hands. For these purposes, use wooden bars, corners or profiles (if the shed is planned to be made spacious enough) made of metal. You need to securely fasten these elements to the posts in order to get a solid frame for mounting the profiled sheets. The next step is the installation of roof purlins. Also make them from boards and corners.

Do not try to come up with a special roof design, because you are not building a full-fledged house, but just a small household object. For a barn, an ordinary pitched roof would be ideal. You can build it with your own hands quickly, no special skills are needed here.

After installing the roof, start sheathing the building with profiled products. Experts advise finishing the barn with vertical whole sheets (without horizontal joints). By the way, if you want, you should do the same. In cases where the finishing is done horizontally, start with the installation of the lower products. And then place the top sheets with obligatory overlap on the previous ones. Treat the contact areas of individual products with sealant. This way your shed will never leak.

2

Profiled products make excellent buildings designed for parking passenger vehicles. A garage made of profiled sheet has a lot of advantages, it:

easy to build with your own hands;
is a durable building;
differs incombustibility and good resistance to frosts;
Requires low costs for the purchase of materials for construction;
can be dismantled and moved to another place at any time.

Garage from corrugated board

A corrugated garage is built according to the scheme that we described above. Dig holes, put up racks (their function is performed steel pipes suitable diameter), pour the foundation. Then you should weld the frame of the future garage. Profiled products will subsequently need to be attached to this skeleton. The frame is made simply - you weld profiles and corners to metal pipes-racks (the first are needed for mounting walls, the second for gates). The formwork that you will fill, as in the case of the construction of a barn, will play the role of a floor. Pour it with rubble, lay it out paving slabs or leave it earthy. It all depends on your desire.

Be sure to make the roof frame with a slight slope towards the back of the garage. After assembling the frame, you can deal with its sheathing with profiled sheets. They, as you remember, must be mounted vertically. The first profiled product should be fixed without protrusions on corner post. The operation is carried out with universal screws and a screwdriver. Fasten from top to bottom, and then be sure to sew the corrugated board along the entire profile.

It is not necessary to sew the last sheet. Do not forget to seal the joints of individual products with sealant. Garage doors are made by hand from the same profiled sheet. It is optimal if you make them the entire width of the front wall. In this case, all work will be done really quickly (especially if you have an efficient assistant who will supply tools, fasteners and profiled products).

3

Profiled products are suitable for the construction of many other buildings. You can make a practical and beautiful gazebo from a profiled sheet, a summer shower stall. Such buildings serve the owners of cottages for decades. Sheds made of profiled sheet are very popular. They protect Vacation home(its porch from precipitation) and give the residential building a more harmonious and attractive appearance. Sheds are assembled and erected in just a couple of hours. We will not even describe such a procedure. For any craftsman, doing it yourself does not cause the slightest difficulty.

Pergola from profiled sheets

But let's talk in more detail about how to build a gazebo and a shower from corrugated board. If you want your country house to attract attention and even arouse the envy of your neighbors, you should reasonably approach the arrangement of the site on which it is located. Be sure to build a beautiful gazebo from profiled products. Such a building will not cost you much, and at the same time you will get a great place to relax. Gazebos are installed on a simple strip foundation. Profiled sheets are attached to the frame of the building by welding. Make the roof of the gazebo two- or single-pitched. If you have already built a barn from profiled products or sheathed your house with them, the process of building a gazebo will take you a minimum of time.

It is also easy to build a shower from corrugated board. The work is done like this:

Choose a place for a shower. It is advisable to place it in an open area so that the house or trees do not cast a shadow and do not close this summer building to receive refreshing water treatments from the sun.
You make a foundation. Shower - the structure is very light. Therefore, the base under it is equipped with the simplest one (a shallow-depth strip foundation is suitable).
Assemble the frame of the building from wooden bars or metal profiles. If you plan to use the shower for as long as possible, it is better to mount steel products. profiled sheets to the skeleton this case attached by welding. So it will be more reliable. In the absence of a welder, fasteners are allowed to be made with screws or self-tapping screws for metal.
Sheathe the shower with corrugated board on three sides.
Craft a door for a building. It must be mounted on a separate steel frame, which is then attached to the main structure.

The final work is the installation of a tank on the roof of the shower. The water tank should be light, so buy a plastic tank. Now you know how you can build a variety of steel structures yourself, the profiled sheet is ideal for arranging the territory of a summer house or a private house!