home Instruments

Do-it-yourself wardrobe from a round pipe in stages. How to make a dressing room with your own hands: types of designs, installation and decoration. Which material to choose

Run the dressing room correctly, then it will be a salvation for those who like to keep their belongings clean and tidy. A dressing room, unlike a cramped closet, allows things to breathe. Also, the advantage of the dressing room is that you can choose from a wide range of accessories the “stuffing” that you need. Learn in detail which filling options dressing room exist and build your dream dressing room with your own hands!

into place old furniture and other rags, actual items of daily use can come if you turn the pantry into a dressing room. This is not difficult to do, since the pantry is already separated by a door, equipped with ventilation and electricity.

What are the undeniable advantages of making a dressing room from a pantry:

You will not have problems in order to legitimize the new premises. Storage rooms are most often already provided for in the plan of the apartment.
The area of a standard storage room often approaches 2 m 2 . This is what you need for a modest but roomy dressing room.
The pantry room is located in a "dead end", that is, it contains only 1 entrance, which allows you to place the pantry components along 3 walls.

Based on all the advantages of a pantry for a dressing room, everyone who has a pantry should think about how to put it under the arrangement of the dressing room with their own hands.

To make a good dressing room out of the pantry, it is necessary not only to install components. You also need to take care of the quality of the original premises:

Clear the pantry of dust and debris from years of stagnant pantry living.
Carefully align the walls so that the installation of a profile or cabinet furniture for the dressing room is possible. Uneven walls create a feeling of an untidy and unkempt room.
The ceiling also needs special care. In order for the ceiling to perform its functions well, equip it with high-quality lighting. For spot lighting that can illuminate every corner of the dressing room, use pendant or stretch ceiling. A small dressing room can also be illuminated by 1 fairly powerful chandelier.

Rules for the arrangement and operation of the dressing room:

The minimum size of the dressing room is 2m 2. Remember this figure so as not to miscalculate with the calculations. A smaller dressing room will be more convenient to replace with a traditional wardrobe.
Unlike a regular closet, the dressing room should have places for fitting and changing clothes. Therefore, provide at least a small space where you can spin in front of a full-length mirror.
If you separate part of the room for a wardrobe, then consider ventilation in the room, because without it your things will have a characteristic unpleasant odor.
Don't mess with shelves. Make it better small, but convenient shelves than a stockade of small ones that will be difficult to work with.
Under the bars, it is necessary to allocate one and a half meters in height and half a meter in depth. This is considered the minimum at which the barbell will be comfortable to use.
Before you start looking for the necessary components, create a project that will reflect the position of every detail of the dressing room to the last shelf. Online designers or professional designers will help you with this.
Think over a method of fencing off the dressing room. Sliding doors, drywall and even more real Brick wall require legalization if they are built where there was nothing before. Perhaps you will be satisfied with the option with a soft curtain or muslin.
Use the maximum possible number of devices for arranging things. Sometimes even a small organizer for accessories can save you from clutter in the dressing room.
Lighting. Do not forget that every detail of the dressing room should be illuminated. Spot lighting or a small chandelier is perfect if your dressing room is not large.
Never delay in order to update the assortment of the dressing room on time. This will keep the changing room fresh.

Making a wardrobe with your own hands is very simple, if you correctly think over the project, taking into account all the rules and useful tips.

What material is better to make a dressing room

There are various ways to create a dressing room. You can choose the materials and tools yourself, and below you will find out what tools and materials are traditionally used to create a dressing room with your own hands.

You may be interested to know about the optimal size of the dressing room, and you can read about it in the material on the site:

To make a dressing room, the following materials will fit:

drywall;
wood;
laminate;
mesh system made of aluminum parts.

The right toolkit is also important in order for the dressing room to turn out the way it was intended in the project.

Traditionally, the following materials are used for self-assembly:

metallic profile;
screwdriver;
self-tapping screws;
accessories.

All the materials needed to create a dressing room are available in a wide range on the shelves in hardware stores.

Arrangement of a dressing room in the living room

There are several options for placing a dressing room. Most often, a dressing room is combined with a bedroom or. However, in the case when there is not much space in the bedroom, and there is simply no pantry, then the living room comes into play.

Need to separate the dressing room from the room, as well as hide its contents? An original and practical wardrobe door will help you, which we will discuss in the article:

To equip a dressing room in the living room, it is important to consider its shape. There are the following types of wardrobe location depending on the shape of the living room:

A dressing room in the corner will look great in a square or slightly elongated living room. It is easy to fit a radial door into such a dressing room, which will make the design of the living room futuristic or in high-tech style.
If you have an elongated living room with a dead-end short wall, then feel free to cut off the end of the room for a wardrobe. The interior decoration of such a dressing room will be very convenient, since the “stuffing” of the wardrobe will be located on 3 walls, and in the middle it will be possible to place an island chest of drawers or just an ottoman for changing clothes.
If there is no free dead end in the living room, then make a wardrobe along a long wall. This option will not take up much space, and the convenience lies in the fact that you can separate such a wardrobe with a soft curtain.
In the living room irregular shape under the wardrobe, you can use the part that stands out in shape.

Almost any living room can accommodate a dressing room.

How to make a dressing room with your own hands (video)

To assemble a comfortable dressing room yourself, you can try to get ideas from various videos. You can easily find a master class on making a dressing room on the net. If you manage to build a wardrobe in such a way that its device completely satisfies you and your family, then a home-made dressing room will become your favorite place in the apartment and your personal pride!

DIY dressing room interior (room photo)

The presence of a dressing room in the house helps to free the living space from bulky furniture, optimizes life and allows you to quickly find the right thing. You can equip such a room by contacting professionals by ordering a ready-made storage system according to individual sizes. Less costly and yet interesting solution- do-it-yourself dressing room: drawings, diagrams and photos from useful tips on arrangement will help make the process easy and fast.

For those who intend to assemble a wardrobe system with their own hands, it is necessary to pay attention not only to the size of the room itself, but also to the possibility of compact and rational internal filling. To achieve maximum accuracy, it is recommended to pre-develop drawings and diagrams of the future storage system. Ready-made design projects for wardrobe rooms with your own hands, photos and diagrams will become a good example when creating your own version.

exclusivity corner layout lies in the fact that under the dressing room you can use places that are usually not involved in any way and are difficult to access. For example, it can be a corner, where doors or windows are located in the walls forming it at a small distance from the center of the corner. Such a space is usually empty, so taking this area under the corner dressing room is the most successful and practical option.

Depending on the area allotted for the dressing room, the corner space can be separated from the main room in several ways. If there is enough space, they arrange a plasterboard partition, and in the case of minimal dimensions, an open storage system project is suitable. Many people use a corner wardrobe in the hallway, which is a worthy alternative to a separate room. Photos of dressing rooms with your own hands will serve as a good example of creating a storage area.

Helpful advice! When cutting off the corner for the dressing room, it is best to use drywall plates: this material is quite light, it is well cut and easy to install.

If you prefer a corner dressing room in the hallway, which will be separated from the main room, then you can equip the interior in two ways: along one or two walls. The scheme of the first option is a storage system compactly assembled along one wall. It is recommended to leave racks and shelves open, which will save space. The remaining space is used for moving around the dressing room, as well as under the fitting room.

In the second option, the location of the filling is planned along two walls. The main advantage of such a filling is compactness with maximum capacity. However, it is worth considering that you can simply enter such a dressing room, but you will not be able to use it as a fitting room. This filling method is suitable for families of several people, where the main task is to fit the things of each of the household as much as possible. For filling, storage systems with a set of corner components are used, which provide good ergonomics for a small space.

Corner wardrobes in the hallway can be fenced off with swing doors, accordion doors or light sliding partitions, however, it is worth considering the features of the hallway. If the room is rather modest, the swing option is absolutely not appropriate. Radius sliding systems look spectacular, the content of which is selected in unison with the overall interior.

Arrangement of a dressing room in the bedroom

Photos of do-it-yourself wardrobe systems, equipped in the bedroom, indicate that this is one of the most common and convenient options. The feasibility of creating a dressing room on the territory of the bedroom can be determined by calculating the area of \u200b\u200bthe sleeping area. If the size of the bedroom significantly exceeds this parameter, you can safely proceed to self-construction dressing room.

There are several schemes for organizing the internal space in the dressing room. This can be a linear storage system design, the arrangement of modules in the form of the letter "U" or "L", as well as the parallel placement of racks and shelves. The most optimal version is a U-shaped dressing room. This layout contributes to the maximum filling of the room and at the same time allows you to leave room for movement around it. As a rule, for U-shaped dressing rooms you need enough footage, however, they can also be accommodated in modest areas.

Helpful advice!An interesting idea is to arrange a dressing room in the bedroom behind the head of the bed: it is separated by a light stationary partition or sliding systems.

For small bedrooms, where it is not possible to isolate 1.5 - 2 m from the room, they are limited to a wardrobe in the bedroom. Such furniture is compact, it does not take up much space and has a thoughtful filling. Ways to fill wardrobes can be found in the catalogs of sites that sell and manufacture furniture. Ready-made sets of storage systems with a narrow specialization for clothes, shoes and accessories are distinguished by unsurpassed ergonomics.

If the layout is such that the dressing room is a walk-through, the parallel arrangement of storage systems is the best fit. Do-it-yourself drawings of racks and shelves in the dressing room indicate that with this method of filling, movement around the room is not difficult, and the storage system can accommodate everything you need. The most convenient combination is the bedroom-dressing room-shower room. But there may be other options.

Related article:

Small space projects. Storage space in the bedroom and hallway. Projects of rooms 3 sq.m. Storage systems and wardrobe furniture.

Dressing room design from pantry 1.1 by 1.5 m

Many professional designers believe that it is not advisable to use a dressing room smaller than 2 sq.m. However, photos of dressing rooms from small pantries indicate that such a small space can be successfully planned for functional system storage. It is on such works that the professionalism of designers is tested. After all, it is necessary not only to transform the pantry into a dressing room, but also to take into account the interests of everyone who will use it, given the lack of square meters.

Projects and drawings of such wardrobes require accurate calculations and optimal internal content. Shallow shelves are very relevant for filling a dressing room measuring 1.1x1.5 m. If you do not fence off the room with a door, the shelves can be moved outside the pantry and then they will become part of the room's furniture and effectively complement the interior. In this case, shelves and racks are designed in such a way that they flow smoothly from the dressing room into the room.

A photo of small dressing rooms from pantries clearly illustrates the options when the entire length of one of the walls is used for the storage system. With such a project, you can carve out additional space so that you can enter the dressing room to search for the right things. However, in order to use the space of the mini-dressing room as much as possible, it is recommended to arrange them as a niche, which is fenced off from the main room with an accordion door or a sliding sliding door.

Helpful advice! When filling a small dressing room, you should place things so that the most frequently used ones are located in the middle.

Dressing rooms in Khrushchev instead of a pantry

The main difference between modern dressing rooms and pantries is the presence of an ordered system of shelves, mezzanines, drawers, hangers and other components for convenient storage not only personal things, but also objects and inventory of various shapes and purposes. In addition, such systems are designed in such a way that all objects and things are visible and easily accessible. There are hundreds of options for dressing rooms, the layout and content of which depends on the area and budget of their owners.

Before you make a dressing room with your own hands, it will be useful to familiarize yourself with the basic planning solutions for dressing rooms. The fact is that in large-sized apartments, as a rule, separate rooms are already provided for dressing rooms. The owners can only equip them with suitable storage systems. But in the apartments of the old housing stock, pantries are allocated for such needs, the dimensions of which are quite small.

In order to organize the space of a small room as correctly as possible, designers offer various methods for arranging dressing rooms from closets in Khrushchev. Many different projects are offered for independent implementation. You can choose the most suitable one by reading the drawings, diagrams and photos of dressing rooms in Khrushchev instead of a pantry.

If initially there is no pantry in the layout of the apartment, the dressing room can be arranged anywhere. It can be a combination of a dressing room with a bedroom, hallway, hall, nursery and other rooms. Experts recommend allocating several zones for storage systems, for example, in the bedroom and hallway, if possible. In an ordinary Khrushchev, a place for a dressing room is determined at the stage of redevelopment, which is preliminarily agreed upon with the relevant authorities.

Depending on the location in the apartment, configuration and area, the dressing room can be arranged along one wall, formed at an angle or given an L- or U-shaped shape. The latest technologies make it possible to plan the optimal storage system for any, even a modest, dressing room. After all, the main advantage of internal filling is a huge range of components for every taste.

Schemes of wardrobe rooms from pantries: photo examples

How to make a dressing room out of a pantry? A photo selection of various transformation techniques demonstrates many options for arranging pantries. There are two main conversion methods. The first is characterized by dismantling the partitions of the pantry and installing a cabinet of the appropriate size in this place. Typically, these cabinets are equipped with sliding sliding doors, which have a mirror filling.

Another option involves completely emptying the contents of the pantry and equipping the room with modern compact storage systems. Updating the internal content will make it possible to maximize the use of the pantry space with racks of various shapes and sizes, shelves, baskets, bars and other elements. The presence of many special hooks, holders will increase the comfort level of the former pantry and extend the life of many things.

Before you make a dressing room out of a pantry, you should carefully consider and draw up a scheme for filling it. Having made the appropriate measurements, it is necessary to calculate the number of shelves, trempels and drawers for small items, special holders for trousers, ties, hats and other accessories. The presence of a detailed project will help to avoid mistakes and unreasonable consumption of materials when converting a dressing room from a closet with your own hands.

Helpful advice! To make the dressing room as comfortable as possible, you can use the metal frame filling system, thanks to which you can adjust the height of shelves, baskets and trempels.

The choice of a suitable dressing room project depends on the plan of the apartment itself. In many Khrushchev buildings, a typical layout of apartments provides for a pantry in the bedroom. This room is formed by enclosing part of the bedroom with a partition for the entire width of the room. The entrance to the pantry can be from the side of the bedroom or from the side of the adjacent living room. In some apartments, the pantry is located at the end of a long corridor, part of which is fenced off with a partition. For example, on the network you can find many suitable projects and photos of dressing rooms from closets in Khrushchev.

How to make a dressing room from the pantry with your own hands

Before you make a dressing room in a room from a pantry on your own, you should choose the best project for such an area. In addition, the choice of option depends on the number of residents whose things will be stored in the future dressing room. You can find drawings and diagrams that fit the dimensions of your room by viewing a selection of photos of dressing rooms from the pantry. The drawings show all the required dimensions, as well as examples of internal filling systems.

Re-equipment of the dressing room from the pantry with your own hands: photo ideas

For those who want to become the owner of a spacious and comfortable dressing room with a minimum financial investment, the option of re-arranging the pantry for these needs is suitable. To do the job, you will need a set of tools, which is probably in the arsenal of any owner:

construction tape measure, level, pencil;
screwdriver, hammer, pliers;
drill or perforator;
screwdriver;
jigsaw;
self-tapping screws.

The selection of material for the internal filling of the dressing room depends on the intended storage system. It is calculated according to the drawings and diagrams of your project. Usually for these purposes they acquire:

furniture pipes (metal and wood) for the installation of a wardrobe rod or frame;
durable lumber for shelves, mezzanines, pedestals (you can use, for example, laminated chipboard);
furniture accessories: guides, corners for connection, handles, hinges, etc.;
boxes, baskets, storage boxes.

At the first stage, it is proposed to dismantle the entire contents of the pantry: remove the old shelves, remove all hooks, hangers, nails and other fixtures. Clean the walls of old wallpaper or paint, and then carefully align. For a new design of the walls, you can apply coloring in light colors or wallpapering. The photo of the dressing room in the pantry, which has hinged doors, shows that a large mirror can be fixed on them from the inside.

Helpful advice! If you have a project with drawings and diagrams of the internal filling of the dressing room, it is not difficult to assemble a storage system.

As soon as the design of the walls is completed, proceed to the manufacture and installation of internal storage systems. Purchase of materials is carried out according to the developed drawings and sketches. They are counted on required amount Chipboard, furniture pipes, fittings, fasteners, self-tapping screws, as well as additional elements of storage systems.

Assembling a wardrobe system with your own hands: basic principles

filling wardrobe system storage depends entirely on the specific requirements of its owners. In addition, the budget allocated for these needs also plays a role. The filling of the dressing room can have several design options. Those who have certain skills in assembling furniture can independently assemble and install cabinet modules in the dressing room. Most often, such filling models are made to order according to individual sizes.

The cabinet structures are quite roomy, fit perfectly into the space and contribute to the neat storage of things. The elements of the body modules have standard sizes. They are equipped with a choice of various accessories that are assembled according to the type of designer. But it should be borne in mind that shelves and racks in cabinet design are quite bulky and take up a lot of space, which is why they are not recommended for filling dressing rooms of modest size.

For small dressing rooms, the assembly of mesh structures is suitable. This type of filling is characterized by compactness, lightness and the possibility of transformation. Structural elements are easy to assemble with your own hands, do not visually overload the space and are inexpensive. For those who make a choice in favor of such filling, it is worth considering that cellular storage systems cannot be overloaded with items that are too heavy.

Frame storage systems are appropriate both in small wardrobes and in rooms with significant dimensions. The assembly scheme is a metal rack that is mounted between the ceiling and the floor by surprise. Further, shelves, boxes, racks and crossbars are fixed to them, which practically “float in the air”. Such filling is characterized by ease of installation, lightness and strength of the structure itself.

Helpful advice! Whatever storage system you choose, in order to achieve maximum comfort when using the dressing room, you must follow the principles of ergonomics.

Get acquainted with the photo of dressing rooms with your own hands using various systems storage is possible on the Internet, where users share their work. In addition, it will be useful to ask about filling options from professionals.

Basic rules for organizing storage

Not only a quick and convenient search, but also their service life depends on how correctly things will be placed in the dressing room. Therefore, it is very important to properly organize the interior space of the dressing room. To do this, it is necessary to plan in advance the storage areas for various things and objects. It is recommended to divide the wardrobe-dressing room into several functional sections:

lower compartment - shoes should be stored here, small accessories(umbrellas, bags) and trousers. The height from the floor should be no more than 70-80 cm. It is better to store shoes on special inclined sliding shelves (height is about 30 cm for summer shoes, 40-45 cm for winter shoes);

middle compartment - used primarily for storing frequently used items. Rods, pantographs, as well as retractable shelves for storing small toilet items are equipped here. Depending on the length of things, the height of the middle zone varies from 140 to 170 cm. Approximately 100 cm is allocated to the compartments for storing shirts and jackets. Knitwear is conveniently stored in baskets and boxes mounted on shelves;

the upper compartment is equipped with racks for storing overall items and seasonal items: blankets, pillows, bulky bags, suitcases, as well as sports and household equipment.

Modern storage systems are hard to imagine without innovative components. These include various holders for trousers and skirts, belts, ties, scarves, boxes for various small things, textile holders for bags and much more. The press hanger for trousers is very convenient in use: it is supplied with coat hangers for a jacket, a hanger for a belt and a tie. All holders are equipped with special soft clips that do not leave marks on clothes.

Independent re-equipment of the pantry allows you to acquire a practical and functional dressing room for storing things and items necessary for everyday life with minimal investment. In addition, the hand-crafted transformation process will enable personal interpretation to meet individual needs.

A comfortable and spacious dressing room is the dream of the vast majority of women. The selection of a part of the room for such a functional corner allows you to solve a lot of problems. And it's not just about the joy of the fair half, a properly made dressing room allows you to solve the problem of storing a lot of fairly intimate items away from prying eyes.

A dressing room is a closet or room with many drawers and shelves, which is designed to store clothes and other items.

It is quite possible to make a dressing room with your own hands, for this it is enough to study the rules and subtleties of storing things, purchase suitable material and take advantage of tips on organizing space.

Rules for a successful dressing room

If there is an unused corner of a sufficient area in a house or apartment, it is quite possible to make a full-fledged dressing room in it. A pantry or attic is perfect for this role, it is enough to install a partition and equip shelves. Any dressing room must obey the following rules.

The size is at least 1 * 1.5 m. In a tighter dressing room it will not be possible to install shelves or it will not be possible to enter it, which will significantly reduce functionality.
To make the room comfortable, you should take care of installing a mirror. This will facilitate and speed up the daily preparation of a successful outfit.
You need to take care of ventilation. If the natural one is not enough, it is worth installing a forced one. Otherwise, the musty smell will haunt you constantly.
If there is no window in the corner in which it was decided to make a dressing room, sufficient lighting must also be provided.
The most successful door to the dressing room is a compartment. She will not eat up the already limited space. In addition, due to its features, it will provide an influx of fresh air. Yes, and decorating such a door is easier than a swing door.
Be sure to plan the internal structure in advance. This will take into account all the features and preferences of the owner of the new dressing room.

Back to index

Planning

The dressing room is a closet that you can enter. It is from this rule that you should build on if you decide to make it yourself. First of all, you need to draw a plan for the future storage corner, taking into account preferences and some rules. The correct internal arrangement of the dressing room will save a lot of space. What rules should be considered when planning a new closet or wardrobe?

The height of the compartment for thick outerwear is from 150 cm.
Office for light outerwear - from 100 cm.
The height of the shelves for shoes - according to the height of the most voluminous box + 10 cm.
The height of the shelves for basic things is selected individually, but usually not higher than 40-45 cm. For more high shelves storing trousers and sweaters neatly is extremely difficult. It is better to make more shelves.
The width of each compartment, of course, the larger the better, but an approximate stock can also be calculated by inspecting your clothing stocks.
You should not make shelves without a minimum margin in height and width. Free space is necessary for ventilation.
It is better to make a choice in favor of quantity. It is more convenient to store a thing folded in several units. Tall stacks will inevitably shift, creating a mess.
Some items, such as socks and underwear, are best stored in well-ventilated drawers or baskets.
For frequently used wardrobe items, shelves should be at chest level or slightly lower.
Removable shelves are excellent. Their installation will allow you to change the design of the wardrobe without global alterations.

Before you start making a dressing room with your own hands, you need to approve the final plan. This will allow you to accurately calculate the consumption of material and avoid rework.

Back to index

Material and finish

Chipboard is a good material for assembling a dressing room.

For the dressing room, you can use any furniture materials. Perfect for natural wood, chipboard and laminate. These materials absorb moisture and return it to the environment as conditions change. Wood and its derivatives are easy to work with, reliable and durable. But it is necessary to take care of the correct and sufficient processing so that the new cabinet does not spoil things.

Drywall can also be used, but keep in mind that it is quite heavy and the shelf from it will sag under its own weight. This construction material can be used for partitions, because the reliability of the walls of the dressing room does not play a decisive role. In addition, drywall will absorb excess moisture, thereby ensuring the safety of things.

For interior decoration dressing room, you can use the same materials as for decorating the room. If the updated closet and bedroom are designed in the same style, this will emphasize the taste of the owners. Wardrobe cabinets painted in bright colors or pasted over with wallpaper look stylish and original. And a special chic - dressing room, decorated with wooden panels.

It is always worth remembering that the dressing room is a closed space and care must be taken to maintain the correct level of humidity.

Bags with moisture-absorbing material, such as silica gel, will help solve the problem.

A dressing room is needed not only to make your beloved happy. For that matter, she is much more interested in the contents of it. A dressing room is needed, first of all, so that things in it are stored for a long time and reliably: they do not deteriorate with pests, do not gather dust, do not cake, do not fade. How to equip the storage of clothes, shoes, underwear with your own hands? We will see.

Storage conditions

Suits, as you know, are never washed. They are periodically given to dry cleaning, and in between they are cleaned with a brush, vacuum cleaner or household steam generator. In all three cases, grease particles and dust, entangled in the fibers of the fabric during wear, for the most part remain there.

Nothing wrong with that. Fabrics made from natural fibers, especially woolen, have the property of self-cleaning. The essence of this process (very subtle, by the way) has been understood by science only in our days, and nanotechnologists promise in the near future wearable things that will never need to be cleaned, washed and ironed at all. An experimental three-piece suit made of nanofibers, soaked in liquid pig manure and tightly rumpled in a ball, cleared itself and sagged in an hour; it took several thousand man-hours of highly skilled labor to create it.

Probably, the matter will not be limited to self-cleaning suits, but when it will be. In the meantime, the dressing room should, firstly, provide a weak natural ventilation. One exchange of air in it should occur within three to four hours. With a more intensive exchange, the dust of eggs and pest spores cannot be ruled out.

The next moment is light. For your information, the larvae of the most common clothes moth do not develop from eggs already at the weakest visible eye sunlight. Therefore, clothing storage, unlike closets, should also provide some natural lighting inside.

Finally, drying wet clothes. It is not necessary to dry it intensively to “gunpowder” before hanging or putting it in storage; from this, the fibers of the fabric or leather dry out and become brittle. In general, the thing soon loses the appearance of novelty and does not last long.

Soaked wearable items must first be “shaken” - simply dry in a room, no closer than 1.5 m from heating appliances, until their moisture ceases to be felt when squeezing. After that, they are placed in a wardrobe or room, arranged according to all the rules, but more on that below.

Then the following happens: particles of contaminants in the fabric, interacting in the thinnest film with residual moisture, are completely decomposed by chemical means. In this case, weak heat is released, providing enhanced air exchange. When things are thus cleared, the dressing room automatically returns to long-term storage mode with a very sluggish air exchange.

If there are no opportunities for ventilation, it comes to bacterial decomposition - rotting - not only dirt, but also the fabric / skin itself. As they say, things suffocated. The well-known "grandmother's chest smell" is a sign of their mustiness. Periodic airing does not improve things, things themselves still cake and then decay.

More about clothes. A closet doesn't have to be sparse. The recovery process after wearing takes several days, so the outfits need to be changed regularly not only for the sake of elegance. M. V. Lomonosov, who went through all the stages from poverty to enormous wealth, once determined: 1 coarse-wooled caftan wears out into a rag with holes in a year with the most careful wear. 5 caftans of the same cloth are enough for 10 years to keep a certain decency in clothes. And 20 caftans made of thin double cloth, exquisite, but less durable, he had enough for the rest of his life, and they remained like new. In any case, appearing at the court of a very demanding appearance retinue of Catherine II, he never caught a sidelong glance at his clothes.

How to make a dressing room

First of all - what is a dressing room? It is easier for oligarchs - they can allocate even a hangar from under the TU-95 in a caponier for their wardrobe. And what should we consider a dressing room? A closet, a room, a rack (by the way, this is a very useful option in terms of ventilation and light, if only it passes by design; we’ll talk about wardrobe racks later)?

We decide simply - if you can move it, disassemble it, then this is a closet. Preferably -, because. the gaps between the leaves and, especially, at the top and bottom, where the rails with rollers, solve the problem of ventilation automatically, and space is saved. If it is mounted directly on the floor in a permanent place, this is already a dressing room, even if it is 1x1.5 m. Here, again, a wardrobe-compartment is optimal, but in the corner wardrobes you will have to make hinged doors and take care of ventilation. And, finally, if attached to the wall - we have a wardrobe-rack. A special case is a wardrobe-pencil case with a retractable hanger, then we will analyze it.

Video: an example of a wardrobe compartment

materials

Any furniture materials will fit to build a dressing room. It is only necessary to say that a home-made dressing room made of drywall is an amateur to make your heart's content. Drywall, generally speaking, is not intended for furnishing; it is a finishing material, or a flat, slightly loaded floor. For furniture, drywall is too heavy and fragile; drywall shelf sags under its own weight.

Plasterboard furniture is made on a spatial frame of a rather complex design, and after assembly, the entire product requires careful finishing. On the one hand, for an actual utility room, the labor intensity and cost of arrangement are too high, and the capacity decreases, because. a solid plasterboard shelf cannot be made less than 5 cm thick.

But on the other hand, it is for the dressing room that the presence of many deaf cavities sheathed with a vapor-permeable material turns out to be useful. They play the role of a thermal and humidity buffer, which excludes sharp fluctuations in the microclimate in the room. What, as you know, neither clothes, nor shoes, nor hats like.

Wood, laminate and moisture

No one can guarantee that the clothes placed in the dressing room are "shaken" in moderation; excess moisture can lead to mustiness. A dressing room made of wood excludes it: wood, even stained, is still porous. It will absorb excess water vapor, and then gradually release it in the optimal proportion.

Laminate has all the useful properties of wood, except for porosity. But it has other advantages: cheapness and low labor intensity of work, strength, durability. When the dressing room project is ready, in any furniture workshop they will cut the blanks to size and trim the PVC saw cuts to match the customer's request. It will cost much less than buying sheets at retail, and all that remains is to assemble the product.

However, the laminate does not breathe, and for a dressing room this is a factor of paramount importance. A rag bag of silica gel in each section can help out at the rate of 20 g per kilogram of the weight of things. Since you need little silica gel, it is better to buy a more expensive indicator one, it discolors when it loses its ability to absorb moisture. Restoring it is simple: you need to heat the produced silica gel in a dry atmosphere (in the oven or with a household hair dryer) to 70-80 degrees. After 5-20 minutes, the color appears again - the moisture absorbent has dried out and is ready for use again.

Dimensions

As for the configuration, design style and finishes, the dressing room arrangement is a matter of personal taste and needs only. It is only necessary to observe some sizes, it is important that the clothes breathe:

The height of the compartment for coats, raincoats, jackets, suits - from 150 cm, to the level of the bar for coat hangers; from it to the top is about 10 cm.
The height of the compartment for light outerwear on a coat hanger is from 100 cm + 10 cm.
The height of hat and shoe shelves - according to the highest item + 5-10 cm.
The height of the linen shelves - according to the content, within 250-450 mm.

The height of the shelves is determined simply: we sort the linen, it is possible on paper, in a list, and we divide the height of the dressing room by the number of varieties; subtract the thickness of the material from the obtained value. So, if in the drawings below you see dimensions like 338 mm, 413 mm, etc., do not rack your brains, according to what abstruse formulas this happened. The authors counted according to the assortment of their linen (or the linen of the customer), and no one bothers you to calculate it in your own way.

The depth of all compartments is the width of the widest shoulders + 10-20 cm; with one exception, see the section on dressing rooms in block Khrushchevs. As a rule, it turns out 45-65 cm. As for the width, it is determined as follows:

17-25 cm for each winter coat, jacket, three-piece suit.
12-17 cm for a raincoat without an insulating lining, a demi-season coat and light outerwear stored in a hanging position.
7-12 cm for shirt and blouse.
The length of hat and shoe shelves - along the width of the compartment, except for the mentioned case for block Khrushchev.
The length of the linen shelves - according to the principle remaining from the clothing compartments. May need to be re-sorted; for example, bring your husband’s T-shirts, T-shirts and underpants into one, and do the same with your thongs and bras (fee!)

Width and depth are related. The minimum width values correspond to the maximum depth, i.e. the compartment volume per corresponding garment is constant. It does not depend on the height of the compartment; a margin of 5 cm at the top and bottom is enough to ensure air circulation. 10 cm or more at the top can be given for the sake of ease of use.

Layout

As is clear from the requirements for humidity and ventilation, storage alone is not enough for a wardrobe. You need a wardrobe system of at least two components: an open hanger for “shaking out” and a room or cabinet with an even, mild microclimate for storing and self-restoring wearable items.

If there is some excess living space, a dryer is also useful. The easiest way to equip it is in houses with stove heating: according to fire safety rules, the stove should not be adjacent to the wall. It is inconvenient to build it in the middle of the room, therefore, in almost every house with stove heating solid fuel near the stove there is a nook, colloquially referred to as a shlamnik. By the way, according to popular beliefs, there lives a kind of authority among brownies - Trash. The chlamnik is an ideal place to pre-dry clothes.

In city apartments, clothes are “shaken” on a hanger in the hallway. It is not necessary to buy it at all, it is easily made by a novice master from a laminate, like the one in fig. Decorative edging - from metal push pins. To make it even and beautiful, they are pricked according to a template from a metal corner, in one of the shelves of which holes are drilled slightly larger than the diameter of the button pins.

Only the extreme holes should be on a line parallel to the corner shelf. Intermediate ones can be made with variable pitch, arc, zigzag, wave, etc., achieving decorative effects. Use the template like this:

The first portion of the buttons is placed by gently pressing with a finger, if only the holes are outlined.
Carefully, pressing with a screwdriver, remove the template along with the buttons; you need to act carefully: although the buttons are pressed in a little, but there are a lot of them and everything together is held quite tightly.
The buttons, except for the last one in the batch, are rearranged from the template to their places and driven in with light blows of the hammer.
The template is fixed in the next position with the last button of the first portion through its first hole; the button is not pressed all the way.
The next holes are marked, the template is removed again.
They hammer the last button of the first batch and all but the last button of the second.
Then - again and in the same way until the end of the work.

Brackets-brackets under the shelf also do not have to be curly forged or cast. The shelf can be hung in the same way as for the dressing room rack, see below. Then a hanger bar will be placed under it, the clothes will dry to the desired condition faster and never suffocate even in humid air.

There is a significant nuance in the layout of the wardrobe complex. In many apartments in the hallway there is a storage room. So, it should not be equipped as a dressing room for the sake of simplicity and convenience: the microclimate is completely unsuitable for long-term storage of clothes. A pantry-dressing room should be arranged in any of the living rooms, and away from the balcony.

Structural elements

To properly equip a dressing room, you need to follow certain requirements for some of its components. There are, however, only two of them: doors and shelves. Doors, as already mentioned, should provide air exchange and let some light in, but not let dust in. Ideal option - doors in the form of blinds; these will look quite good in the interior of the colonial style, country or similar. Otherwise, either gaps of at least 2 cm at the top and bottom are needed, or in the same place and in the same place along a series of holes with a diameter of at least 30 mm.

Shelves must provide ventilation, i.e. be perforated or mesh. There are two exceptions: firstly, open-type wardrobes, inscribed in design into the interior. Secondly, a dressing room-pencil case, where the design of the retractable part should provide strength. Ventilation in both cases is also provided with blind shelves.

Special shelves for dressing rooms are commercially available, see fig. above left. But you don't have to spend money on them either. It will be cheaper and more convenient to bend to your size from metal mesh. We need, of course, not a chain-link, but a welded fine-meshed one, see fig. on right. This is available in galvanized, chrome-plated (the most expensive) and PVC-coated - any color and completely rust-free. Trimmings, just suitable for shelves, will gladly be sold at any hardware store on the cheap.

Design

The dressing room is a utility room, aesthetically absolutely subordinate to the general idea of \u200b\u200bthe interior, therefore there is only one requirement for its design: as God puts it on the soul, if only it does not spoil the view. But from this arbitrariness, nevertheless, a consequence follows: the design of the dressing room should organically weave from the general style of the room in which it is located.

That is, when starting a renovation or moving into a new building, the dressing room is designed as a last resort, when everything else is already coordinated. Initially, you only need to allocate space for it. Otherwise, one cannot avoid some dominance of an unambiguously secondary element, and this is an obvious bad taste.

In the pantries

Design issues disappear if you make a dressing room from a pantry. Two questions remain: technology and placement. As far as assembly technology is concerned, the best option- all to the walls on silicone. Nothing needs to be drilled, dusted, but held tightly. If necessary, you can also disassemble it - warm it up properly with a household hair dryer at full power and pry it off with a sharp screwdriver or a mounting knife.

It is better to put the hanger bar not in purchased plastic holders, but in home-made ones, so it will be reliable for years and years. Material - plywood from 10 mm thick; shape - a circle about 10 cm in diameter with a U-shaped neckline. Shelf holders - from the same plywood in the form of strips. Inclined mesh shelves, so as not to move out, can be nailed with small nails to the ends of the plywood; to do this, you need to cut the blanks with a margin for bending the side.

Those who like to tinker more with metal and plastic than with wood can recommend the design shown in fig. She has only two attachment points to the wall; shoe and hat shelves made of mesh are glued with silicone, and the hat shelf is inclined anteriorly so that the bar remains free. From an old Soviet folding bed with a rotten tarpaulin lounger, you can build a dressing room of this type in just an hour. Frames of legs covered with a net (you can use a fishing net) will also add linen shelves.

But here is the accommodation - here the pantry is different from the pantry. "Storage" dressing rooms in block houses, old and new, are usually unimportant: the pantry in them is either too narrow a pencil case, or goes into the hallway, which is bad for the microclimate. Although a dressing room in a pencil case can still be made by placing clothing compartments on two floors, it will be inconvenient to use it, and the kitchen and the hallway are too close. Here, a built-in dressing room in some niche or in the blind end of a narrow long room will be more functional.

Going through the options

However, the best option is a dressing area in the living room. Why? No need to beat the walls, floor and ceiling, buy expensive rails with rollers (remember: the best dressing room is open or compartment) and suffer with installation and adjustment of the entire system. On fig. a diagram of such a "do-it-yourself mini-dressing room" is shown. Of the works required, subject to custom-made sawing of blanks to size - in fact, only assembly on plastic dowels and installation of a mirror on silicone, which can be done in a day. Vertical metal rods in the shirt compartment are not required, you can take a chest of drawers ready and pick up a laminate to match it. In terms of capacity, it will be enough for a young family, especially if the apartment is mortgaged (a sad joke).

More options for small wardrobes are shown in fig. below. The first one on the left can be conditionally called a bachelor's room: it is, in fact, a chiffonier squeezed to the limit without doors. It will include a coat, a jacket, two or three suits, a minimum of light things and underwear, but you can stick it anywhere.

For residents who still care about how their home looks, a miniature corner dressing room is more suitable: its surfaces easily fit into the design, and the contents are not striking. If the door is made of glass matte with a pattern, or the dressing room is glued entirely of glass, as in the beige inset in the figure, then it will even pull on a meaningful piece of furniture.

Fencing off a whole corner under the dressing room, as in a light gray box, is not worth it. Firstly, in terms of capacity: per unit of occupied area it turns out to be one and a half times less than that of a rectangular one. Secondly, in terms of functionality: it is inconvenient to fold the filling of linen shelves into triangles, otherwise the tails will hang. Thirdly, in terms of labor intensity and costs: it is more difficult to cut a triangle, and very wide doors are needed, and without them, things from triangular shelves will slide all the time.

And, finally, aesthetics - a vast plane blocking the corner will draw the eye towards itself, and visually significantly reduce the room. Those who are familiar with the psychophysiology of visual perception are well aware that an extensive tightened angle “presses”.

It is more correct to make a corner dressing room in the form of a parallelepiped with one cut corner. Such a drawing is shown in Fig. in the center. According to visual perception, it no longer sticks out, but rather, as if pressed into a corner. In terms of capacity, it turns out to be equivalent to a triangular one twice as large, if you count along the wall.

Pencil case

Now let's see what a dressing room is. The essence is simple: it is a narrow high rectangular case with a hanger-frame retractable from the side, equipped with shelves. Attempts to create a dressing room in the form of a pencil case have been made for a long time, it has too many advantages, which are discussed below. But everything rested on the guiding mechanism: extended to the limit, or at least halfway, the hanger sagged, warped and jammed. Structures made of rail guides with rollers or pins in pipes at the full exit of the hanger also warped and wedged, and hydraulic cylinders and springs with levers or pantographs turned out to be too complicated and expensive.

Recently, one of the furniture makers implemented in the finished product the idea for a dressing room with a pull-out hanger, free from this drawback. He remembered one of the design commandments: if a knot doesn't work out well, do it the other way around.

Specifically, in this solution, the side ends of the shelves are used as guides, with 2 mm PVC edging, the guide rollers are used in pairs, they are fixed from the inside on the side walls of the case and shifted as far forward as possible, see fig. The fully extended hanger comes back without jamming just from a hand push. Shelves for small items are equipped with low sides made of PVC sheet (not shown in the figure) so that accidentally hanging laundry tails do not fall under the rollers and stop the hanger.

Rollers - the cheapest, not rotary (not self-aligning). When installing on site, the hanger is first assembled, then the rollers are attached to the sides of the case and their height position is checked. Next, the upper and rear walls are attached to the sidewall facing the wall, the hanger slides in and the remaining sidewall is mounted. The assembly is completed by fastening the sidewalls at the bottom in front with a U-shaped galvanized strip 0.4-0.6 mm thick lying on the floor, as shown in the inset at the top right of the figure; it also serves as a stopper that prevents the hanger from rolling out spontaneously.

The options for installing the canister that have been implemented to date are shown in the following fig. Left - in the sleeping niche. The designers give the length of the bed niches in odnushki with a margin, and it turns out a nook-garbage bin. Most often, residents leave it at the head, putting a table or bedside table there with drawers that slide out from the side.

The option is not their best: groping for something with your hand behind your head, knocking over or breaking a vase for a short time, throwing glasses on the floor, etc. But if the gap is left at the foot, the wardrobe-pencil case becomes there “like a native”, and in the production to order, all refinement comes down to changing the width of the shelves, ends and top. With computer-controlled sawing, additional costs compared to the standard series are zero.

In the center is a pencil case in the bedroom of a small apartment. This decision, according to the first customer, is conditionally called "the corner of a lazy coquette". Barely piercing (sorry - rubbing) her eyes and hanging her legs on the floor, she immediately finds herself in front of a dressing table and a mirror glued to the side wall of the pencil case.

On the right - a more serious option, for the nursery. It's all about the organization of lighting. Children's eyes are easily damaged, and for correct vision it is necessary that the light falls obliquely to the left at an angle of about 45 degrees. If the table is pushed into a corner close to the wall, the light will fall too gently. The cabinet in the corner forces the table to be moved almost to the center of the window, and the light is direct, sharp. Leave an empty space in the corner? What will come of this, parents do not need to explain, they themselves were like that. The custom-made pencil case fills just the right width with benefit, and its sidewall facing the table can be decorated or hung there with bookshelves.

At self-manufacturing the work can be even more simplified and cheaper: we generally refuse the sidewall adjacent to the wall, and we attach the rollers intended for it directly to the wall. You do not need to align it: the rollers will not leave their place. The gap between the hanger and the wall will be uneven, but so what? It is not visible, and the structural height of the rollers is at least 4 cm. Such humpbacked walls do not exist in slums either.

In Khrushchev

The demand for secondary "Khrushchev" apartments is steadily growing due to their cheapness, and apartments in brick Khrushchev apartments with ceilings over 3 meters high and walls two bricks in general instantly go away, realtors just lick their lips. Therefore, it is impossible not to touch on the issue of a dressing room in Khrushchev.

In the block relics of the housing boom of the 60s, the prospects, it must be said, are deplorable: everything is so compressed that it is very difficult to find a suitable place for a separate room. A more or less successful way out is found only in projects with a narrow and long hallway. Its branch, which closes with a door to the living room, is suitable for the microclimate, but the width of the corridor is only 1.25 m.

In this case, it is not the dressing room itself that decides the matter, but clothing accessories. Namely, hangers with a swivel hook. Things are hung as shown in the figure; such a suspension does not interfere with their self-healing. If the hat and shoe shelves are inclined, then the depth of the "ultra-compact" dressing room, including the thickness of the compartment doors, can be reduced to 0.4-0.35 m, and the passage remains sufficient.

In brick Khrushchev, difficulties, as a rule, do not arise. There is almost always a closet suitable for a dressing room in a suitable place. The layouts of some common projects are shown in fig. 44/31/5.8 is especially good, the author happened to live in such a dozen years. A small but very cozy apartment, and a large closet perfectly accommodates a wardrobe (highlighted in green), a rack for jars (blue) and a workshop corner (brown).

Guys in secret: should be placed exactly as shown. At the same time, in the workshop you can arrange a secret wine cellar and a secret safe for stash. The missus suddenly plans a "shmon", homemade preparations will immediately appear before her eyes, and in her right side vision, much stronger than her left, her outfits. It will immediately be distracted and sorting out will go completely different from what it was thought up. Immeasurably safer than a box of dirty socks.

In projects 58/42 / 6.2, most likely, but in the one highlighted in Fig. yellow improved 41/27/6.2 for sure, you will have to move the door to another room - the closets are so uncomfortable that at the slightest filling you have to reach for things from the threshold. In the original 41/27/6.2 (lower left) there is no closet at all, but a niche is provided in the hallway. Under the dressing room, it is quite suitable, in that place the microclimate is favorable. Only too small for a compartment device, you will have to make a rack, which is described below.

Just in case: the numbers in the designations of the projects mean the first - the total area; the second is residential; the third is the kitchen area.

Video: an example of the internal arrangement of the dressing room

Rack

A wardrobe-rack can look quite stylish and aesthetic if things are tastefully selected, neatly arranged / hung and kept clean, see fig. An indispensable condition for such a solution is that the shelves and the frame of the rack should be lost against the background of the contents. Structurally, the dressing-rack is solved simply: the supporting frame is made of perforated profiles attached to the wall, clothes shelves are made of dark laminate (the mesh here will pass through the aesthetics only for shoes) on metal struts. Hanger bars are attached either to the bottom of the shelves or to the struts.

Metal factory fittings for wardrobe racks are quite expensive, but a do-it-yourselfer can avoid unnecessary expenses. At the same time, any pieces of a bar with a diameter of 5-6 mm will go to the struts; perhaps not very smooth and touched by rust. But how can they be simply and cheaply ennobled so that they have a look? And at the same time, securely attach the bars?

The heat-shrinkable tubes (HERE) usually used for electrical insulation will help out. They are made of durable polyisopropylene, available in white, black and all colors of the rainbow. They are seated by heating up to 70-80 degrees with a jet of hot air from a household hair dryer. The diameter of a non-shrink (fresh) tube must be taken twice as large as the diameter of the bar, while the plastic layer will be 2-3 mm with its greatest strength.

The design of shelves for the wardrobe is shown in fig. on right; there is also a way to mount the rods. There are some peculiarities in performance. The fact is that HERE, when shrinking, not only shrink in diameter, but also slide a little along the length. Therefore, we cover the metal with plastic at home in the following way:

We put a piece of the tube first on the lower, according to the figure, part of the bracket with a margin in both directions.
We seat, evenly warming up with a hair dryer in a circular motion, this will give the greatest strength to the part of the plastic frame, which accounts for the entire weight of the rod with clothes.
When cool, cut to size.
We put a rod on the bar with holes drilled in advance in the corner stop, exactly parallel to each other.
We put on the upper section of the tube, move it with effort to the bar, hold it pressed against it.
With a hair dryer, we seat the tube near the bar by 2-5 cm (if only the fingers do not burn), without loosening the pressure.
After cooling, we seat the remainder, cut off the top to size.

It remains to decide what to do with the markings on the tube, volts there, amps? It's useless in the dressing room. Here again, the best is the best cheap option- HERE is made in China, uneven thickness in the "fresh" form and with a not very smooth surface. From them, the marking is washed off either with a cotton swab with alcohol, or detergent for dishes, or cleaning powder for stoves on a damp cloth.

The seated tube is very durable, hides the roughness and unevenness of the metal. The weight of the rod with the load holds without problems, but for the “china” it will be nice to drip the connections with superglue after assembly.

What if you just order?

Is it possible to order a dressing room in the apartment? Not everyone knows how to craft and determine the right place? Can. The world's leading brand for wardrobes and household items in general is the Swedish-Dutch company Ikea, whose branches are scattered around the world. In the Russian Federation, they are almost in every regional city and in many more or less large regional centers.

Now you do not need to run from the closet to the corridor, in which there is a full-length mirror, picking up one or another combination of clothes. And the sudden appearance of guests will not take you by surprise because of an untidy apartment, because all things can be distributed in the dressing room. Even in the smallest apartment in terms of area, it is possible to place a compact dressing room in which clothes, shoes, and accessories will be stored.

Thus, the dressing room will place ready-made combinations of clothes, and things laid out in a certain order will save you time on searching and selecting in the future. The urgently needed item will be found in a matter of seconds.

Storage of things can be organized as functional purpose clothes, such as T-shirts and T-shirts on one shelf, jeans and trousers on another, and the distribution of things according to color scheme. By installing a dressing room, you will always be sure that things are neatly hung, they will not wrinkle, they will not lose their impeccable appearance.

Where can you place

It is possible to place a dressing room in a private house, in an apartment and even in a country house. Do not be mistaken that the owners of small-sized housing should give up their own dressing room. The dressing room can be built-in or located in a separate room.

Your attention is presented dressing rooms for every taste and budget.

From the pantry

If you have a pantry in the layout of the apartment, then we recommend using this room in the most useful way. By placing a structure for storing clothes and things, you can use the entire usable area in the best possible way. The dressing room fits perfectly in the size of the pantry. It is enough just to add various shelves, drawers, brackets for hanging outerwear to wardrobes. In the drawers, you can install dividing strips, and place belts, accessories, hats there. Arrange neatly folded clothes on the shelves, as well as arrange shoes arranged according to the seasons.

The dressing room should meet your needs, so the design should be approached after analyzing the number of things. Understanding the total volume of things for storage will help to correctly calculate the required number of shelves.

In the bedroom

If the bedroom is impressive in size and the owner prefers to have a dressing room at arm's length, then the designers are ready to offer the most various options. The dressing room can be with sliding doors, or even have a design without doors. For each customer, an individual dressing room with a unique design is designed.

In the corridor

The best solution for filling the corridor space is to install a dressing room. Now there is no need to purchase cabinets and chests of drawers, which take up free space in the rooms. By installing a dressing room in the corridor, you solve several problems at the same time: freeing up free space in the rooms and organizing the empty space of the corridor. The dressing room can be designed as a corner room, built into the wall, or any other configuration.

From a niche

In order for the interior to be individual, it is enough to use free niches for mounting the wardrobe system. You can draw the attention of others to such a non-standard approach, interesting design, and also make any niche useful and functional.

in the attic

You should not steal a place for a dressing room in the bedrooms of your own cottage, because the attic room does an excellent job of solving this problem. The use of an attic allows rational use of living space for the needs of a modern person.

under the stairs

The space under the stairs is quite roomy, and allows you to place things and clothes. Place a dressing room under the stairs and you will save money on purchasing other storage furniture.

materials

For the manufacture of do-it-yourself dressing room are used various materials. The proposed list of materials will help you make the right choice.

Drywall allows you to make a separate niche in the room, which is further saturated with accessories for convenient storage. Drywall is easy to paint, so the dressing room can be made in the most daring color preferences.

From old furniture it is easy to make a dressing room, original and unique design, with minimum investment money and maximum savings in time for the manufacture of elements.

Chipboard is an affordable and common material for the manufacture of frames, shelves and drawers. It allows you to make a dressing room in various color variations, with a matte or glossy effect of the facing surface.

The Joker system is a base, including various fittings, to saturate wardrobe rooms. Glass and shelf holders, hooks, hangers will make the dressing room functional.

Plywood is a material with high strength properties. Plywood is widely used for the manufacture of partitions and shelves in dressing rooms.

Wood - natural material, which is applicable for creating dressing rooms in children's rooms, cottages, any residential premises where the owners care about the safety and environmental friendliness of the interior.

Chrome pipes allow you to make a mesh dressing room. Pipes are used, the outer diameter of which does not exceed 25 mm. The pipe is easily cut with a hacksaw, and connecting and fixing fittings will help to mount it in the wardrobe. The design, made of chrome-plated pipe, has high performance characteristics.

How to do it right: step by step instructions

Planning

Today, a dressing room for most people is no longer a luxury, but a necessary attribute of a living space. The high rhythm of life suggests the presence a large number clothing that is important to store properly. A well-designed dressing room will create a certain mood in the room, save space in other rooms, and provide convenience and comfort in everyday life.

Before designing a dressing room, you should decide on its location, requirements for design and capacity, and the amount of money that you are willing to spend on manufacturing. You can provide one dressing room for all family members or, on the contrary, allocate separate niches for each. The size of the room will depend on whether you want to complement the storage of clothes with things such as a blanket, pillows, bedding sets. Sports equipment can also be located in the dressing room.

Pre-sort things to calculate the required number of shelves and hangers. It is advisable to draw up several sketches of dressing rooms, and after consulting with all family members, stop choosing one. When designing, take into account a few additional shelves that may be needed later.

When developing a project for a mesh wardrobe, it should be taken into account that the design of the mesh shelf can withstand no more than 60 kg. However, such systems are distinguished by affordability and relative ease of installation.

Mounting

Shelves are installed at a distance of 35 or 40 cm from each other. The depth of the shelves, as a rule, is more than 40 cm. Wide shelves allow you to fold clothes into several piles. Long shelves require additional support to prevent sagging from heavy items. The bars are recommended to be placed at a distance of 100 cm above each other. In the presence of long coats or dresses, the installation of a single-row bar is allowed. Drawers should be mounted using high-quality fittings that can withstand high loads. Drawers located above the chest line are extremely inconvenient. Baskets with heavy items should not be placed higher than their height.

Sliding doors fit into almost any interior and room configuration. Such doors are not only distinguished by their functionality, they will also bring a special design to the interior. Sliding doors are easy to use for children and the elderly. Installation of doors does not require any experience or special skills, it is enough to insert the doors into the rails.

When designing a rack in a dressing room, one should not forget that it is not customary to store linen in them, as well as medicines in open form or transparent containers. You should think in advance what you will place on open racks. Racks differ in a practicality therefore they can be made the most various standard sizes. Determine your needs and act boldly. Racks allow you to save space and compactly store a large amount of various things and clothes when folded.

Lighting and ventilation

It is necessary to pay special attention to the creation of sufficient lighting and the presence of ventilation. The presence of a little natural light does not exclude the need for additional light sources, such as chandeliers, sconces, floor lamps. An important role is played by the light in the area where the mirrors are located. Illumination, located on the floor around the entire perimeter of the room, will increase the lighting on the lower shelves. Ventilation is the main job of providing clean air. It is the ventilated room that guarantees protection from bad smell and the formation of pests. Also, ventilation eliminates the settling of dust on clothes and things.

Arrangement

When enough free space in the dressing room allows, you can install a comfortable chair or sofa. It is worth considering the placement of mirrors, which can be freestanding or mounted to the walls. It would be useful to purchase additional hangers, which, if necessary, will help to place new clothes.

Here are a variety of walk-in closet designs to inspire you to design your own.

Here is an example of a dressing room, which is located in the pantry. It should be noted that the room was made according to the requirements of the man. In a certain order, there are shelves for bags, shoes, denim trousers, sweaters and pullovers.
This pantry takes on a completely different sound when shelves are designed in it, the size of the entire length of the room. The design of the dressing room is decorated with a relief baguette. Due to limited space, there are no hinged doors in the design, as well as a minimum number of drawers.

The design is distinguished by the presence of built-in lamps around the entire perimeter of the room. Spot lighting allows you to effortlessly find the things you need on the topmost shelves. Since the width of the room is sufficient to accommodate various sliding shelves, this dressing room is designed with all sorts of variations of those.

The dressing room is made in a minimalist style, with a small number of drawers. For small items and various accessories, wicker baskets with handles are used. Pants are not stored folded on the shelves, but hung on special holders. The design is mounted to the ceiling and floor surface to ensure the stability of the system. Recommended for installation in a small bedroom. The dressing room is an economy class and allows you to make the most of the free space in the bedroom at a low cost. Low cost, convenience, ease of installation - distinctive features without door frame.

Sliding doors separate the sleeping area from the dressing room. This solution is appropriate for premises with a total area of more than 18 sq.m. As a rule, in such dressing rooms a full-length mirror and an ironing board are placed. In a separate dressing room, it is possible to store not only clothes and shoes, but also household appliances, such as a vacuum cleaner, an iron. It is possible to add shelves to the system for storing books, family photo albums, personal care items and cosmetics.

The sliding doors separating the dressing room will be modern and practical solution. They are made using glass or mirrors. Glass can be colored, transparent or tinted. Often there are corrugated or patterned glass, as well as mosaics. The cost of the original design of compartment doors is relatively high, but they will certainly declare the excellent taste of the owner.

The dressing room is represented by a complex design, which, due to large mirrors visually increases the space in the corridor. An interesting design will certainly attract the attention of guests. In the absence of sufficient light in the corridor, built-in lighting in the wardrobe system will be relevant.

A widespread version of the dressing room in Russian apartments. This choice is preferred for large apartments with wide corridors. Hinged doors are somewhat inconvenient for use in corridors. Therefore, compartment doors are recommended, which are distinguished by their reliability and stability. Such dressing rooms are made strictly in size and allow you to hide the irregularities of the walls of the corridor.

Design proposal that creates a certain style of interior in the apartment. Wicker wicker baskets add originality to the dressing room. Several vertical and horizontal partitions, the presence of hooks give the design simplicity and minimalism. Also pleased with the relatively low cost of manufacturing and ease of installation of such dressing rooms.

A bold decision in which the dressing room has no doors. Minimalist design distinguishes the construction. It is recommended to install a double-row hanger in the dressing room if there are a large number of blouses, jackets, suits.

With the help of drywall, a separate niche was made in which the wardrobe structure was installed. This solution helps to use any free space available in an apartment or house. Often, residential projects already have various niches that are great for dressing rooms. You can find houses in which each family member has a separate niche with a dressing room.

Install folding doors in the niche, and the dressing room is ready to be filled with shelves or a hanger. Doors can be plastic, glass or wooden. Various textured curtains also look great, which serve as an excellent replacement for doors. Manufacturers offer a huge range of accessories and ready-made systems for filling the dressing room.

Spacious attic with a modern wardrobe system. A discreet color palette and a bright sofa create a special style. High walls allow you to place hangers for outerwear, such as coats. And in narrow niches it is possible to store shoes.

The dressing room is made in light colors, which visually add space to the room. The lack of natural light is compensated by the installation of various lamps aimed at all niches of the attic. The free space in the middle of the dressing room is used for furniture, which also stores various things and clothes.

The presence of an apartment in the attic room does not exclude the possibility of installing a dressing room. Presented design in pastel colors, which creates coziness, comfort. The low wall of the attic does not allow the installation of a closet, so storage of things can be best organized using a wardrobe system consisting of chrome pipes.