home doors

Curtains on the windows of the wallpaper with their own hands. Creativity and simplicity with your own hands: how to make blinds from wallpaper for your favorite window. How to make roller blinds from wallpaper

Not many people know how to produce blinds from wallpaper. Although such a solution is more economical and original than a factory product. For manufacturing, you need a minimum of material and a little skill.

Wallpaper blinds

Paper blinds are becoming more and more popular among housewives who love to create comfort with their own hands. In addition, this option for decorating window openings is not only universal - it can be used in the kitchen, hallway and bedroom, but also multifunctional - you can completely shade the room or partially. The product will fully match the interior, as color scheme, as well as the form, the craftswoman can easily choose by purchasing the desired wallpaper.

What is needed first

How to make blinds is of interest to many hostesses, but it is also important to prepare correctly: choose the material, tools, decorative ornaments of a ready-made curtain. You don't need much time to work - only 1-2 hours. It all depends on the complexity of the model.

Tools for making curtains from wallpaper:

Sharp scissors so that the edges do not tear and are neat;
Hole puncher. It is better to take a purchase, so it will be easier to thread the fixing cord later;
Ruler for aligning the edges;
Measuring tape - calculation according to the measurements of the window;
A simple pencil for marks during the preparation of a sketch of a future product.

Such devices can be found in every home, so you do not have to specially purchase equipment.

As for the selection of material, then you don’t have to worry here either:

Wallpaper, of which the curtain base will consist;
Ribbon, decorative cord - will fix the position of the wallpaper;
Retainer. Instead, you can use ordinary beads;
PVA glue;
Scotch.

Important ! The term of use of blinds from wall-paper directly depends on quality of wall-paper.

As for the choice of wallpaper, there are some features on which the type of blinds and the service life will depend. It is better to choose thick wallpaper so that the curtain does not tear for a long time and closes the windows completely. The colors are preferably restrained, such wallpapers will fade slowly, which means that they will not lose their aesthetic appearance for a long time. The pattern should not be too large - this can affect visibility in the room.

Step-by-step instruction

Attention ! The holes through which the cord will be threaded must be pasted over with adhesive tape so that they do not fray.

Making paper blinds is very easy, and most importantly, quickly and inexpensively. For manufacturing, you can take the rest of the wallpaper after repair and the usual utility tools.

Varieties of paper blinds

You can make a variety of blinds with your own hands, which will bring a unique flavor to your interior. Curtains of a similar design are very popular, but unlike the above, they have two tightening cords. Usually they are placed vertically to each other on opposite sides of the edges.

The only thing to consider is that you need two clamps and the consumption of the cord, as well as the adhesive tape, will increase. But the product, designed in this form, is identical to real factory blinds. The curtain perfectly closes the windows, protecting the inhabitants of the apartment or house from the sun's rays. and curious looks.

Roller blinds made of paper are very popular. They look very impressive, while completely obscuring the room, as they fit well to the window. Making a roller blind with your own hands is very easy. Often, in the manufacture of roller blinds, they do not take paper, but fabric. But it is better to study on paper, since a damaged piece of matter will cost the hostess much more than part of a roll of wallpaper.

The peculiarity in the manufacture of roller blinds is that it is not necessary to fold the paper into an accordion - it is enough to wind it into a tight small roll. No need to make a hole for the tape, which will fix the state of the curtain. The fastening system of this type of paper blinds differs significantly from those already listed.

When you want to decorate your own in a designer way, it will be useful to study the instructions on how to make blinds from wallpaper with your own hands. The HouseChief editors in this publication will analyze in detail all the points regarding the design of double-glazed windows with photo examples. After all, protection from the sun's rays in the house should be beautiful and practical.

Read in the article

Advantages and disadvantages of wallpaper blinds

Suppose after repair you have unnecessary rolls. They can be used to organize light-protective canvases on windows, that is, to manufacture. However, before you start creating a useful accessory, you should familiarize yourself with the advantages and disadvantages, which sometimes become decisive.

Let's take a look at the benefits first:

As for the disadvantages of this invention, it is not subject to wet cleaning and fades very quickly in the sun. Therefore, after a while it turns into a very unattractive product.

Interesting ideas for window blinds from wallpaper with your own hands

If you are faced with the question of how to make blinds for windows, you must first determine the required dimensions. It all depends on the width of the window opening and the frame itself. It is from this that it is worth starting from the development of design. Consider some incredible ideas that will transform the room.

Floral options. Various colors may be involved here, but pink, lilac and green are more common. This design can be done in the form of a "Peacock tail" and an unusual accordion. Often a light colorful version of the blinds is hung.
Accordion blinds - pleated. When properly made, they will add zest to interior design rooms.
. This is one of simple ideas how to make blinds from wallpaper. There is nothing to make here, except for a small decorative mount. Such curtains last longer than others and perfectly regulate the intensity of light transmission.
Accordion "Inside" It is considered a completely complete solution for windows if the morning sun enters the room. The manufacturing process is quite simple. There is also a variant of folds to the outer edge of the window.
If there are already finished blinds, but I want to diversify them, why not stick pieces of colored wallpaper to the stripes. But here it is important to accurately determine the dimensions so as not to disrupt the closing-opening function.

In addition, a housewife can not limit herself to fantasy at all. Why not create your own decoration idea and surprise your guests?

How to choose components for the manufacture of blinds

When choosing materials for making homemade window blinds, you can use any type of paper wall covering (it is desirable that they have a good density). At the same time, it is better to pay attention to those that will match (usually this happens, since the remnants of pasted ones are used).

Wallpaper

In addition to those materials that remain after, completely different ones can be used. Fabrics can be chosen according to your preferences.

Please note that too bright colors are not suitable for placement in rooms with a sunny side. Such options fade very quickly and lose their presentable appearance. But models of rolls in light colors will retain their freshness longer.

As for density, paper wallpaper should be preferred for learning how to make. They bend perfectly and keep their shape throughout the season. But ordinary paper practically does not darken the room, and if it is urgently needed, then why not use vinyl or interlining?

Suitable tools

To decorate windows, you will need a small list of tools and improvised means, namely:

scissors, hole punch, ruler;
decorative tape, retainer, lace;
glue or double-sided tape;
nippers, painting knife.

You can’t do without the listed list in order to fix the finished blinds in the window opening. Accessories can be plastic silicone or metal. The main thing is that the hostess has the skills to work with them.

On a note! Our detailed instructions with photo instructions will help to study in detail the entire process of making blinds from wallpaper with your own hands and repeat it in your apartment.

Features of making do-it-yourself blinds for windows in the form of an accordion

Wallpaper blinds are considered so affordable that they can be made without difficulty, the main thing is to prepare so that all the components for work are at hand.

What you need to make

First of all, you should prepare tools for each stage of work. They can then simply be removed to the side so as not to interfere. What will be useful:

scissors, tape measure;
double-sided tape, lace;
clamps with spring;
hole puncher;
the wallpaper itself.

Instead of a hole punch, you can use a simple pencil with an empty grater compartment at the end. Only work in this way will be many times longer and more difficult.

How to measure the window opening and frame

Depending on how the paper curtain will be fastened, the parameters should also be measured. To attach the curtain to the outer edge of the window opening, you need to measure its length and width, and add 10 cm to the blinds down and on the sides as a margin.

If the fixation of the paper curtain will be carried out inside the opening, then it is advisable to make its size 5-10 mm narrower. As for mounting on the frame, here it is necessary to measure the glass and use the dimensions of the canvas exactly. It is even easier to try on the canvas on the window and add half the height of the window down to it, because when folded, the length decreases somewhat.

For the convenience of taking measurements, a laser tape measure is suitable. With it, you will definitely not make mistakes.

Do-it-yourself blinds from wallpaper step by step: detailed photo instructions

It is preferable to work on a large free surface. Best of all, on a clean floor. Prepare it for this: remove the tracks and wipe. Next, we act according to a strict algorithm, illustrated by a photo that will help you make blinds from wallpaper with your own hands.

Illustration	Action Description
	We prepare the necessary equipment and make sure that they are in harmony with the interior.
	We make segments according to measurements, if necessary, glue the width on the sides. This is only done if the wallpaper is narrower than the window opening.
	Next, we do the accordion folding. For convenience, we take a ruler, the width of each fold should be 3-4 cm.
	We fold with an accordion almost to the very top. You can leave a fragment for fixing to the frame, but not necessary. We fix the ends with a clothespin and leave for a while.
	Then we bend the entire resulting structure in half to get a fan with a gap in the center.
	We make a through puncture in the center with an awl. The upper part of the resulting fan is used for gluing.
	Using a gypsy needle, thread through both holes. In this case, the length of the lace must be greater than the length of the finished curtain. We lower our clamp almost to the very bottom.
	We pass the lace through the hole in the wallpaper and glue it with adhesive tape to the inside of the fold so that the puff holds tight.
	Attach two strips of double sided tape. If it is wide, then one tape for the entire width will be enough.
	Little by little, peel off the protective strip of adhesive tape and glue it to the frame or slope. We adjust the height of the canvas with a clamp.

We see that the process of making paper blinds takes about 30 minutes. At the same time, the result is quite unusual and rich, despite its budget.

Master class on making roller blinds from wallpaper with your own hands

Do-it-yourself wallpaper roller blinds great option glass decor. They can be made from any kind of paper wall covering. If you want the curtains to cover the entire window, then most likely two halves of the canvases will come in handy. You can also choose wider options. Blinds made of non-woven or vinyl wallpaper handmade ones are considered a good alternative to paper ones, since this business requires even canvases that are difficult to wrinkle.

What do you need to work

Stock up on material that is really suitable for a particular room. And for the job itself will come in handy:

roll (may not be whole);
tube for fixing the roll;
scissors, double-sided tape;
fixing tapes.

To create rolled paper curtains, it is necessary to provide for the option of fastening to the window, otherwise there may be breaks in the structure of the wallpaper and their unreliable fixation in the opening. An excellent solution would be to install a special cornice.

Removing window dimensions

The most convenient way to measure a window is to use a piece of wallpaper and figure out what width you need for the opening. If the roll is too narrow, you can expand the canvas a little by gluing additional strips on both sides so as not to spoil the design.

If you measure the width of the window with a tube, then it is not necessary to know the exact value. Attach it to the window, cut off the excess and, based on its length, select the required width of the wallpaper.

We make blinds from wallpaper with our own hands: step by step instructions

It is not difficult to make roller blinds from the remnants of wallpaper, the main thing is to follow the instructions and do not forget important points. Let's analyze in more detail the whole essence of the process.

We take the selected tube (you can use the old one from the factory roller blinds), glue the tape of double-sided tape along the entire length.
Fixing inner part wallpaper on the tube and wind it up to the end.
We bend the lower end of the wallpaper, insert it into the weighting bar into a special groove. It is important that this load captures the entire length of the blinds.

The only thing left is to fix the finished paper curtain in the window opening. For details on how to make blinds from wallpaper with your own hands, see the video at the end of the publication.

How to fix a curtain rod for a roller blind

For fixing it is better to use specialized cornices with brackets. Such models are sold in stores. They have special grooves and rope mechanisms that will securely fix the roll and will freely adjust its height.

Roller blinds can be made from tubes made from thin paper wallpaper

You can independently insert special regulators or an axis with a holder into the tube, which will play the role of a curtain lifter.

Do-it-yourself paper blinds "Peacock tail" from wallpaper: what is important to remember when making

The rounded options are considered the most popular today. They are suitable not only for rectangular windows, but also look perfect in semicircular double-glazed windows. To properly build this element, you need to study a few useful tips:

to obtain an inextricable semicircle at the base of the paper blinds, you can use double-sided tape by gluing the two ends together;
when installing a fan structure in a semicircular frame, it can be made from several canvases glued in width and simply fixed at the bottom point with glue or a clothespin;
semi-circular wallpaper blinds can only partially close the window, for example, from above. Such options are usually fastened from below with a stapler with large staples.

The summer heat forces even the most resistant to high temperatures people to close themselves from the merciless rays of the sun, especially in those cases when the windows of the apartment face south. It is not always financially possible to purchase high-quality window blinds, and sometimes there is simply no desire to wait until they are made to a certain size. Therefore, the question arises of how to make blinds from wallpaper, the excess of which, as a rule, remains after repair and collects dust in the pantry. In addition, thick wallpaper paper can not only protect the room from overheating, and the curtains from fading, but also organically fit into the overall interior, especially if you use the same material that the walls of the room are pasted over.

This way to protect yourself from the sun will save not only a decent amount, but also time, as it will save you from repeated trips to the workshop.

In addition, you can notice that neatly made pleated blinds will not look disharmonious or “beggarly” at all - today some designers purposefully opt for this particular option for protecting windows from sunlight, because such curtains are quite capable of becoming a real decoration of the room.

It is also very important that making such paper curtains is within the power of any homeowner, even one who has never done needlework before. Therefore, if you have everything you need to make pleated blinds at hand, you can safely get down to business.

Production of pleated blinds

The first option and several of its varieties

Before starting work, it is imperative to clear the table of everything superfluous, since you will need a lot of space on which you can freely spread a wallpaper canvas with a length of at least 1500 mm. After that, you can proceed to the preparation of all the necessary tools, which, however, can certainly be found in any home.

Illustration
	So, for the manufacture of blinds you will need: - canvas, preferably paper wallpaper; - scissors; - meter ruler and pencil; - a beautiful thin cord, approximately 1.5 ÷ 2 mm thick; - awl; - Double-sided tape, - stationery knife. In addition, you may need tape to decorate or support the curtain in a folded form, depending on the chosen model of pleated blinds. Instead of a retainer, it is quite possible to use an ordinary clothespin that matches the color of the wallpaper, or a hair clip.
	The latch is necessary to fix the blinds in the desired position. For this purpose, an accessory element of clothing is used, which can most often be found on the laces of the hoods of sweatshirts or jackets. A rope is threaded into it, it is clamped inside the latch, and the curtain is securely held at the selected height.
	The very first step is to measure the window or only the double-glazed window, depending on how wide it is planned to make the curtain. Let's say the window height is 1350 mm, about a quarter is added to this value, that is, in this case- another 350 mm, which are necessary for the formation of folds. The result is a length of 1700 mm - this length will require wallpaper.
	Further, wallpaper is spread on the table, measured right size canvases. To prevent the roll from curling, it is recommended to put a load on it along the edges. After marking the required length, it is necessary to draw a line perpendicular to the edges along the square, along which the wallpaper is cut.
	Then, the wallpaper canvas intended for blinds must be marked for the size of the corrugations. Typically, the width of the fold is 20÷30 mm. Naturally, the risks along the edges of the canvas must correspond to each other.
	According to the marking points made, the canvas must be drawn using a ruler. According to the marked lines, it will be easier to bend the canvas into an "accordion".
	The first fold is best folded using the edge of the ruler. It is laid along the drawn line, the edge of the canvas is folded and the fold of the fold is marked, so the fold will turn out to be even and clear.
	If the wallpaper is too dense, then along the drawn line, attaching a ruler, it is carried out with folded scissors or the blunt side of the blade of a table knife, with slight pressure.
	Then, to get a clear line, bending the first fold, draw along it with the side of a pencil or pen (naturally, so that there is no trace left - the pencil must be clean).
	Further, focusing on the markup and the first bend, the fold is bent in the opposite direction, according to the "accordion" principle. Such manipulations are carried out until the entire canvas is folded into an even pile.
	The resulting “accordion” is pressed from above with a ruler, which will additionally help to temporarily fix the “pleated” shape in this position.
	After that, depending on the chosen model of the blinds, the middle of the curtain width is determined, or it retreats 150 mm from the edges to pierce holes. In the first case, one cord will be passed through the middle of the future curtain, in the second model, two cords are passed through the canvas closer to the edges of the blinds.
	At the indicated points, with the help of an awl, one hole is pierced in the middle part of the folded curtain, or two - closer to the edges.
	The resulting punctures need to be slightly expanded by gently twisting the awl in them. This will be required in order to pass the ropes through them, which should move freely inside the holes made.
	The next step, using a “gypsy” needle or a crochet hook, a rope is pulled through the holes, the edges of which must be melted in advance, and its lower side must be fixed in the latch. Moreover, below the latch, you need to leave a cord with a length of approximately 400 ÷ 500 mm - this will be a margin for stretching the curtains in length. Later, its excess can be cut off, and the end can also be melted.
	When the rope is stretched through the entire "accordion", it should be secured with tape on the top fold of the curtain. Then, a strip of double-sided tape is glued onto the same part of the blinds.
	The result should be something like this.
	Both the first and second versions of the curtains can be left rectangular, tied, for example, with ribbons from below.
	Blinds with one cord passed through the middle can be folded into a “fan” by pulling it up a little and securing it with a latch.
	After the "fan" is formed, its edges are glued together with double-sided tape or, if possible, with silicone using a special gun. But in this case, it will no longer be possible to separate the glued edges in the future.
	Therefore, instead of glue, you can use a small clothespin or hairpin for fastening, hooking it in the middle of the width of the blinds, from the side that will be turned to the window glass. In this case, such a fixation of the "fan" will be invisible from the room, and at any time there is the possibility of straightening the bottom of the blinds, making them even.
	If a fan-shaped bottom of the curtain is chosen, then its folds must be beautifully and carefully straightened so that the rays of the folds converge at one point in the center.
	Finished blinds are fixed to the top window frame, using a strip of double-sided tape previously pasted on them, from which the protective film is removed before fixing.

There are several more options for blinds, which you can also make yourself using wallpaper canvases.

This is a simpler version of pleated blinds, for which you don’t even need to prepare and thread cords through the canvas. For such a curtain, you will need a wallpaper canvas, which is folded like an accordion in the same way as described in the table above. Blinds are also fixed on the frame with double-sided tape, and their lower side in the middle is pulled up and fixed with a regular clothespin or hairpin, forming a beautiful fan. If desired, on the wallpaper canvases, from the side facing the street, you can stick a foil that will reflect ultraviolet rays, preventing them from heating the room.

If arched windows are installed in the apartment, then wallpaper blinds can become a real decoration for them, as they are fixed along the arch in the form of an elegant fan, collecting one edge of the wallpaper bent into an “accordion”.

To do this, on the wallpaper, previously folded with an "accordion", an ordinary adhesive tape 15 mm wide is glued along one edge.

Then, the "accordion" is collected in a pile and pierced with an awl through and through from the side where the adhesive tape is fixed. Through the resulting hole, with the help of a gypsy needle, a cord is pulled, which will pull the lower edge of the fan, and the adhesive tape will not allow the paper to tear. The cord is tied into a knot on the side that will be turned to the glass. Blinds made in this way will not only protect the room from the sun, but also give the room a special charm, emphasizing the shape of the arch.

Blinds prices

If the arched part of the window is divided by a vertical rack of the frame, then two half-fans are made for each half of it according to the principle described above. They are fixed to each window sash separately, making up a whole semicircle. This method of fixing curtains on an arched window looks no less interesting than the previous version.

If there is a need to close only the upper part of the window, for example, to block the flow of sunlight to any specific part of the room (baby cot, desktop, etc.), then you can use wallpaper folded in the form of a fan and fixed to one of the frame corners. This option looks quite original, both from the inside of the apartment and from the street.

See also the varieties of the self-manufacturing process

The second option - the task is somewhat more complicated

Making the next model of paper curtains, including wallpaper, will take much longer than a regular pleated blind. However, they also look more respectable, and also protect the room from heat much more reliably, as they consist of two layers, between which an air gap is created.

For the manufacture of such blinds, the wallpaper must be marked and cut into strips, approximately 100 mm wide.
The strips are twisted into a tube in length, and then their edges are glued with an overlap of 10 mm. There should be enough such tubes so that they are enough for the entire height of the window.
The glue should dry well, and then each tube is compressed into a flat lamella, so that clear side ribs are outlined, and the place of its gluing is in the middle of the upper side.
The next operation is the middle line of each folded tube, coated with glue with a strip of 10 ÷ 12 mm, and all elements are glued together along the length. The glue should not spread, so dry glue is best - otherwise the whole effect of lightness of such a design will be smeared.
All glued and stacked tubes should dry well.
Then, without unfolding the resulting structure, 150 mm must be retreated from its edges. In these places, with the help of an awl, holes are pierced and expanded, into which cords are passed. They should not be visible from the outside, as they will pass inside the straightened tubes. The lower ends of the ropes are passed through the clamps, which will help to hold the curtain in different positions. Thanks to the air gaps formed in the tubes, the blinds can be completely stacked or raised to the desired height.
You can hang these blinds using two plastic rings tied to the upper edges of the rope. They are hung on hooks screwed into the upper slope of the window opening. In the case of plastic windows and - you can get by with double-sided tape, since such blinds are not at all heavy.

Newspaper blinds

This type of blind can be made from any paper, including wallpaper, but still, old newspapers are most often used to make this variety - due to the fact that they are printed on paper that is thin, easily curled and retains its shape.

To work, you will need a lot of newspapers, a beautiful thin cord, two plastic rings, self-tapping screws, nails or hooks, depending on which plane the blinds will be fixed to.

For the manufacture of curtains of this type, 900 × 400 mm in size, it will be necessary to wind 170 ÷ 200 newspaper tubes 400 mm long. If they get a little longer, then they can be trimmed at the end of the work. Based on this proportion, you can calculate the amount for your size of the window opening.

Illustration	Brief description of the operation to be performed
	To make it easier to preparatory stage work - the preparation of tubes, you will need a knitting needle or another fairly thin metal rod. Its diameter will depend on how large it is planned to make these elements of the blinds.
	Having wound the newspaper on the rod, its edge is fixed with dry glue or PVA. The glue must dry well. Having prepared required amount tubes, they need to be painted acrylic paint, moreover, you can use any colors - as intended by the sketch of future blinds. It is recommended to take a coloring composition intended for facade works because it is more water resistant. Additionally, it is best to add PVA glue to the paint in a ratio of 3: 1.
	After the paint dries, the tubes are laid out in a row and leveled. Further, you can proceed to the crucial stage - to fastening them together into one “canvas”. This process can be done in two ways:
	The first option is to fasten the tubes by twisting them with a rope, making one or two knots between them, or simply using the “figure eight method”. It is best to fix the knots with glue so that they do not untie and loosen. Work begins from the top side of the curtain. The rope is tied to a plastic curtain ring, its ends should be about one and a half times longer than the length of the blinds, and it is better if they are even a little more than they are not enough. Then, the two ends of the cord are intertwined, one of which runs from the outside, and the other from the back of the tubes.
	The second option is suitable for those who know the art of crocheting. Moreover, knowledge of complex patterns in this case is not required at all - you only need to be able to weave a simple chain. This method of fastening is more reliable, as it firmly holds the tubes next to each other. At the same time, the cord does not spontaneously weaken and does not stretch.
	If the tubes are tied in knots, then in the lower part, the cord is also tied in a knot, which must be additionally fastened with glue for reliability.
	In order to hang the blinds on the window frame, you can drive carnations into it, screw in screws or special hooks.
	If the blinds turned out to be uneven at the edges, then they must be carefully cut with sharp large scissors so that they do not jam the edges of the tubes. After that, it is recommended to cover the finished product with acrylic varnish, which will make the tubes more durable and give them a matte sheen.
	In finished form, the blinds look something like this. If it is necessary that there be a smaller distance between the tubes, then instead of two knots, you can tie one, use the figure-eight weaving system or a crocheted chain.
	In this photo you can see how the street is visible through the tubular blinds. At the same time, coolness is maintained in the room, and it is possible to freely view the street from the room, and at the same time, nothing will be visible from the outside.
	If this type of blinds is painted white, then in the evening the window will look as shown in the photo, that is, the opening will not be highlighted with a dark spot.

On a cloudy day, if you want to open the window completely, you can use two methods.

Prices for roller blinds

roller blinds

Firstly, the blinds are easy to remove as unnecessary, as they are hung on the window with two rings, but you can do it in another way.
Secondly, it is easy to make the simplest "regulator" for the height of the blinds. From the side of the window, cords are tied to the plastic rings, 200 ÷ 250 mm long, and another ring is attached to their lower end. When the blinds are rolled up, in a roll, the bottom ring is put on the same nail or hook on which the blinds are hung. Instead of a cord, you can use one or two satin ribbons that will not only support the curtain, but can also serve as a decorative decoration.

It should be noted that the same blinds can be made not only from newspapers, but also from a smooth wooden rod, well-dried reeds or plastic tubes, which are fastened together in exactly the same way.

Decorating old blinds with paper wallpaper

If there are already blinds on the windows, but they have lost their attractive appearance, and I would like to purchase new ones, but there are certain difficulties with finances, then there is still a way out. Look in the "stash" - after one of the repairs, a piece of wallpaper probably remained, and you just have to make a little effort, as the appearance of the windows will be changed.

So to spend this in something even creative process you need to prepare:

Wallpaper or beautiful decorative paper.
Any plastic blinds.
Brush and PVA glue.
Scissors, ruler and pencil.

Having prepared everything you need, you can proceed to work:

First of all, the blinds need to be cleaned of dust that can accumulate on the lamellas during their operation. Sometimes it takes a lot of effort to do this, but such an operation is necessary because the wallpaper will not adhere well to the surface of dirty plastic.
Cleaned and dried blind slats must be measured and counted.
Further, the wallpaper is spread on the table and marked with a ruler and a pencil according to the dimensions taken from the lamellas. Then, the canvas is drawn into the required number of stripes. In addition, they should note the location of the holes through which the connecting threads on the blinds are passed. It is recommended that all stripes, according to the figure, be immediately numbered so that there is no inconsistency in the ornament.
Then, the wallpaper is cut into marked strips, and in the places where the holes are, cuts are made, or each of the paper overlays is cut into three parts. They will be glued to the lamellas between the holes for the fastening threads.
The next step is to carefully stick the wallpaper strips onto the slats of the blinds. If the strips protrude slightly beyond the edges of the lamellas, then after the glue dries, their excess is carefully cut off with a sharp clerical knife. Do not trim the paper until the glue has dried, otherwise the work may be damaged.

So that the wallpaper coating is less polluted, and the lamellas can be periodically cleaned of dust, they are covered with two to three layers of acrylic varnish. Each subsequent layer is applied after the previous one has completely dried.

It should be noted that to tidy up the blinds or just give them more decorative look can be done by gluing a stained glass film on them, which is available today in the same way as wallpaper, and has quite affordable price. It is easy to work with this material, besides, you do not need to purchase additional glue.

If you have long wanted to buy wooden wallpaper, but it didn’t work out, since they are not cheap, you can paste over ordinary plastic blinds with self-adhesive paper that imitates the texture of wood.

Roller blind prices

roller blinds

How to protect yourself from the sun's rays hitting the windows?

It is clear that the first thing that comes to mind is ordinary curtains, however, there are many other original ways. The publication of our portal will surely help you decide on the best option.

So, as you can see, from the information presented above, making or decorating blinds on your own, using wallpaper or even waste paper, is quite possible, since there is nothing particularly difficult in this process. The main thing is that the work on the manufacture of such curtains will not require much time, and financially it will be almost invisible to the family budget.

At the end of the publication - an interesting video showing another interesting method of making paper blinds.

Video: Homemade paper blinds - try it yourself

Blinds are an item in the house with which you can beautifully decorate any room. Blinds are a charming type of decor. They can turn an ordinary room into an original and beautiful room. They are also able to protect the room from the scorching sun. You can use them not only in rooms, but also in the kitchen, in the hallway, on the balcony, loggia, in the country. Blinds can be bought at the store or made by yourself.

How to make blinds from wallpaper: their variety and design

Blinds made of simple and cute wallpaper are very popular with many owners of houses and apartments. Such window protectors will decorate any room, make it cozy and bright, and also bring variety to your home.

Thick wallpaper paper can not only protect the room from overheating, and the curtains from fading, but also organically fit into the overall interior, especially if you use the same material with which the walls of the room are pasted over

How to make blinds from wallpaper to transform your home? It takes a little time, patience and diligence. By making them yourself, you will make the house bright and unusual.

It is very easy to try to make blinds from wallpaper. You can even cope with such a tricky task yourself. The most important thing is to be patient, and then you will definitely succeed. Blinds can be different, so you first need to determine which type you will do.

Popular models and types of blinds for windows:

vertical;
Horizontal;
Roll;
Blinds - pleated;
Stationary.

All types of blinds are completely different from one another. Each of them has its own, special design, method of adjustment and the material from which they are made. Blinds - pleated and horizontal, the most popular, with the help of which you can adjust the lighting of the room, making it light or completely darken it. Roller blinds can be made not only from wallpaper, fabric is also suitable. Blinds made of fabric will look much more spectacular in the interior.

Unusual do-it-yourself blinds from wallpaper: their main advantages

Blinds appeared a very long time ago, they began to be used as early as the 13th century in countries with a hot climate. This is the most effective method, which allows you to protect the room from heat. Blinds are more practical than curtains, they can be washed and cleaned without removing them from the window. If you can't get ready-made blinds, then make your own.

Such wallpaper blinds will last for a very long time, and if you get tired of the color, you can easily make new ones.

Do-it-yourself wallpaper blinds will look very original in any room. With them, the room will look bright and chic, to the envy of the neighbors.

Homemade blinds will make your room unique without having to throw away the beautiful pieces of wallpaper that you have left over from the renovation.

Benefits of blinds made from wallpaper:

Multifunctionality;
Suitable for any window
economical;
Very easy to make.

Paper blinds can replace ordinary curtains in your home and at the same time you will save your money. They will also help to refresh your interior by adding bright colors to it. In this case, you can get blinds exactly the color you want.

DIY master class: wallpaper blinds

To create blinds from material such as wallpaper, it will take only a couple of hours. And most importantly, we, of course, need the wallpaper itself. It is best to use dense canvases, for example, non-woven. Such products will be more reliable and will last a long time.

Unique blinds that will distinguish your interior from many others

Do-it-yourself wallpaper blinds, a master class will help us a lot in this matter. It will be necessary to do everything correctly and calculate so as not to spoil the product.

To work, we will need to purchase necessary tools, prepare the main material from which we will make our blinds. We will also need various decorative elements, with which we will decorate the finished product.

To work on the manufacture we will need:

Pieces of wallpaper;
Sharp scissors;
Hole puncher;
Centimeter;
Simple pencil;
Scotch;
Decorative tape;
PVA glue;
Retainer.

Wallpaper for blinds must be chosen carefully. If you want them to serve you for a long time, you need to choose wallpapers that are more durable and of high quality. You can choose any color, but it will look better restrained, not too catchy. The drawing on the wallpaper should not be too large, so that it would not be very conspicuous, and not spoil the aesthetic appearance of the room.

We make blinds from wallpaper with our own hands: step by step instructions

It is very easy to make blinds from wallpaper, quickly, at no cost. Such a product will look beautiful and original, but most importantly, it will help you get rid of bright sun.

Curtains made from improvised materials have some clear advantages.

Do-it-yourself blinds from wallpaper - step-by-step instructions will be a must. She will help you do everything right without making a single mistake.

To get a good result, you need to do everything slowly and step by step, then your blinds will be reliable, durable and will last a long time.

Step by step instructions we need:

At the very beginning, measure the width and length of the window;
Cut a rectangle from a piece of wallpaper, the desired size;
Fold the rectangle with an accordion, its width should be from 3 to 5 cm .;
Measure the middle with a pencil, and make a hole with a hole punch;
Paste the hole on both sides with adhesive tape, for strength and make holes again;
Thread a ribbon or cord or braid into this hole, straighten the blinds;
Fix the upper end of the tape with a knot;
Attach the blinds to the window with double-sided tape;
Draw the bottom in the form of a fan, fix the two lower strips with tape;
Put a retainer on the end of the tape so that the blinds do not move apart.

With the help of this instruction, blinds can be made any you like, you just need to connect your imagination. Blinds, made by hand, will bring a bright variety to your home, give it sophistication and beauty. They will also help you hide from the intensely bright rays of the sun and prying eyes.

Do-it-yourself window blinds from wallpaper step by step (video)

Blinds made of paper recent times are very popular among housewives who want to create a unique comfort. This window decoration option is versatile and multifunctional. But about the method of making blinds from ordinary wallpaper not everyone knows. This solution looks economical and original. To create such a product, you need to have a minimum of knowledge and skills. In this publication, you will learn how to create blinds from wallpaper with your own hands.

The heat of summer days makes even the most heat-resistant people hide from the merciless rays of the sun. This is especially true for residents of apartments in high-rise buildings, the windows of which are directed to the south. But not always financial opportunities allow you to buy high-quality blinds. Sometimes there is no time and desire to wait until they are made in accordance with the required parameters.

That is why the question of how to make blinds with your own hands is becoming more relevant than ever. For manufacturing, you will need materials that everyone has at home. In addition, at this time, the use of do-it-yourself wallpaper blinds (photos of the use of such products can be found in the interior) is a frequent occurrence. This is not only an original, but also an affordable element of room decor. It is also a reliable protection of the room from overheating, and curtains from burnout.

Paper blinds harmoniously fit into the design of any room. But given the characteristics of the material, it is better not to use curtains in the kitchen and other utility rooms. Blinds from wallpaper look organically on the windows of the cottage, veranda, loggia and on.

This product has many advantages:

you can easily create it at home with your own hands;
reliably protects the room from sunlight;
unusually decorates the window;

it is possible to use any pattern or pattern;
does not interfere with flowers on the windowsill;
suitable for the interior of any style;
can be changed every week.

Paper blinds will prevent unnecessary waste, as well as save the owners from the repeated need to go to the workshop. You need to spend only an hour or two on a homemade curtain, no more.

short service life;

rapid wear;
compared to salon models have a cheap look.

Blinds on the windows with their own hands: types of structures

Blinds were invented by the Indians of the West Indies. Their models were distinguished by the presence of shutters with inclined wooden slats, which reliably protected from the sun. Such blinds were called colonial.

In the 18th century, Venetian blinds appeared. The design of this model was characterized by the fact that the inner sides were fastened with hinges, and the outer ones with a cord. This made it possible to change the slope of the lamellas in accordance with the season and the weather.

Modern types of products are classified depending on the material from which the curtains are made, and on the way they are adjusted. Consider the most popular designs:

Vertical models - blinds in which the parts are placed vertically and can be rotated at the required angle. You can adjust the rotation of the slats with a cord.
Horizontal products - curtains, decorated in the "ladder" system. The slats are placed horizontally, and their adjustment is performed by a special drum.
Roller blinds are blinds in the form of a fabric or paper sheet that are rolled up using a special mechanism. Such products are the perfect choice for the living room.
Pleated blinds - the material of the curtain is complex in the form of an accordion. Adjustment is carried out by special cords and ribbons, at the ends of which there are special clamps.

When choosing blinds, it is necessary to pay attention to the shape of the window for which the curtain is intended, as well as to the material and ease of adjustment.

Useful advice! For people who want to independently control the level of illumination in the room, it is better to choose horizontal models or pleated blinds.

What is needed to createdo-it-yourself blinds

The question of how to make blinds yourself is of interest to many women. Even people who have never done needlework can make curtains from wallpaper. But before starting work, you must definitely select the material for the product, tools and decorations for decorating the finished curtain. And the process of creating blinds will take no more than 2 hours. Production time depends on the chosen model.

To make blinds from wallpaper with your own hands, you will need the following tools:

sharp scissors;
hole punch, awl or similar tool;
ruler;

tape measure;
marker pencil.

Such devices are in any home, so you do not have to buy them specifically. As a material you need to find:

The basis of the curtains is wallpaper. You can use the leftovers saved after the repair.
Tape or decorative cord is used to fix the position of the blinds.
Glue for connecting parts.
Regular and double sided tape.
Fixative (an ordinary bead, a clothespin to match the color of the wallpaper or a hair clip will do).

Useful advice! The quality of the curtain depends on the properties of the base. The better the material, the better the blinds will turn out. It is recommended to choose thick wallpaper, so the product will not tear for a long time.

If you choose a discreet color of the canvas, then the curtain will fade slowly, which means that it will retain its aesthetic appearance for a long period of time. It is also best not to use material with a pattern that is too large, as this may affect visibility in the room.

How to make blinds from wallpaper with your own hands: step-by-step instruction

Blinds made of wallpaper are often used on windows in the country, loggias, balconies, verandas, as well as in rooms whose windows face the sunny side. They look original, and manufacturing costs are minimal.

Such products are ideal for windows of non-standard sizes, because it is often problematic to buy curtains for these windows. In addition, these models, due to the density of the material, are able to completely protect the room from sunlight.

Before starting work, be sure to remove all unnecessary and prepare workplace. Indeed, for the manufacture of high-quality and beautiful curtains, you will need a lot of free space. It is important to prepare everything necessary materials and tools.

It will help you easily make blinds from wallpaper with your own hands step by step instructions:

using a tape measure, measurements are taken of the glass of the window for which home-made blinds are made;
since the fabric of the product is bent in the horizontal direction, one fourth of its size or 30-40 cm must be added to its length. In this case, the size will be correct. In this case, the width does not need to be changed. For example, if the height of the window frame is 135 cm, you need to add another 25%, which in this case is 35 cm. As a result, a canvas with a length of 170 cm is required;

the length of the decorative cord or ribbon must be greater than the size of the product, it is necessary to take into account the tying of bows or knots. Also, this value is affected by the method of fixing the lower part of the blinds;

Related article:

Types of roller blinds Advantages. Window installation options. Features of mounting roller blinds with your own hands.

then spread the wallpaper and cut out the necessary rectangle from the material. It is important to ensure that the pattern on the canvas is not distorted or cut off. To prevent the roll on the table from curling up, its edges can be pressed with a small load. If the window is wider than the width of the wallpaper, then two canvases can be connected with glue or tape;

mark the corrugation and bend the canvas. The stripes should be even and parallel to each other. It is better not to make the width of the bend more than 7 cm. The optimal size is from 3 to 5 cm. To make the bends even and clear, it is recommended to use a ruler;
you need to try on an unfinished curtain to the window. If necessary, the excess should be cut off;
depending on the model, the curtains on the folded material mark the middle with a pencil or leave marks 15 cm from the edges for piercing holes. In the first option, one cord will be skipped in the center of the blinds, in the second - two on the sides;
A hole punch makes holes along the marked strip. An awl, screwdriver or any other similar tool is also suitable for this. The resulting hole must be slightly expanded so that a rope or tape can be freely passed through it;
to strengthen the paper, use adhesive tape. To do this, it is necessary to paste over the holes on both sides, after which they are re-made with a hole punch;
then a strong ribbon or cord is pulled through the holes, then the accordion is straightened along the canvas. The upper end of the tape is fixed with a knot;

blinds are attached to the window using double-sided adhesive tape. To do this, at the end of the curtain, at the fold, glue a strip of adhesive tape so that it completely covers the fold of the canvas. After that, the protective coating is removed, and the product is attached to the window;
below the blinds are made in the form of a fan. To do this, the last few strips are interconnected with PVA glue or glued with adhesive tape. Cord or tape is fixed from the window. Another design option for the lower part of the curtain is to leave it rectangular, tying it with ribbons from below;
in order for the blinds not to move along the entire length of the rope, a retainer must be put on the lower edge. In its quality, you can use an ordinary bead;
the product is ready.

This is one of the options on how to make blinds for a window out of wallpaper, but there are a lot of such instructions. The order of the design creation points will be similar, but there may be some differences that depend on the type of blinds.

There is an even simpler option for making pleated blinds, in which you don’t even need to thread the tape. In this case, the required length of the wallpaper is folded like an accordion, as in the previous version. The finished curtain is attached to the frame with double-sided tape, and the lower part is fixed with a clothespin or hairpin, forming a beautiful peacock tail.

Useful advice! The holes through which the cord is threaded must be treated with adhesive tape, otherwise the product will quickly collapse.

Making do-it-yourself blinds from paper is very easy, fast, and most importantly, cheap. You can use unnecessary pieces of wallpaper that remained after the repair, and ordinary utility tools. It is recommended to decorate the finished product with rhinestones, sparkles or drawings. If desired, the blinds on the side facing the street can be pasted over with foil. This will help reflect the ultraviolet rays, preventing them from heating the space of the room.

In the case of arched windows, paper blinds can be used to stylishly decorate them with elegant wallpaper fans. This method will not only protect from the sun, but also bring a special charm to the interior and emphasize the unusual shape of the window.

If it became necessary to close only the upper part of the window so that the sun's rays did not fall on a certain part of the room, for example, a desktop or a baby cradle, then a fan-shaped curtain would be the best fit. You can attach it to one of the corners of the frame. This option looks original and stylish both from the inside of the room and from the outside.

You can also watch a video on how to make blinds from wallpaper with your own hands.

Wallpaper blinds: varieties of paper products

Homemade blinds can bring variety and unique flavor to the interior of the room. There are several options for such products. Let's consider them in more detail.

Curtains in the form of an accordion on a ribbon or cord and a model with a similar design, but on two tightening ropes, are extremely popular. Usually in such products they are located vertically and parallel to each other, but on opposite sides of the edges. Photo blinds from the wallpaper will help to harmoniously fit this model into the interior of the room.

It should be remembered that for the manufacture of such a curtain, two clamps are needed, and the consumption of cord and adhesive tape will be twice as much. This model is identical to real factory curtains. Such blinds perfectly close the windows, which means they protect residents from the sun's rays and the prying eyes of passers-by.

Paper blinds are very popular. They look spectacular, and also perfectly cope with the protective function. Since such models fit snugly against the window, they darken the room remarkably. Making roller blinds with your own hands is very easy. Often, fabric is used as the basis for such a product, rather than paper.

Useful advice! To create a roller blind, it is first recommended to use paper. After all, a piece of damaged wallpaper will cost the hostess much cheaper than a piece of fabric of the same size. But fabric roller blinds look more spectacular.

Not less than original look paper blinds - roman blinds. For the manufacture of such a product, more material is required, and some skills are also needed. But they look so original and beautiful, like lambrequins or ordinary curtains.

Any version of wallpaper blinds will be an excellent option for decorative window decoration.

Making roller blinds with your own hands from wallpaper: a master class

There are a huge number of ways to make paper blinds with your own hands, step by step instructions, master classes, thanks to which you can quickly get an original and cheap decorative window addition.

You can see the features of making blinds from wallpaper with your own hands on the video. The main thing is that the curtain does not need to be folded in the form of a pleated, but it is enough to wind it into a tight small roll. Also, there is no need to make holes for the cord. The fastening system of this type of blinds differs from previous models.

Before you make blinds with your own hands, you need to prepare the tools:

drill;
hacksaw for metal;
pieces of wallpaper;
metal tube with a diameter of 1.8 mm;
wooden or plastic plank for plumb;
fasteners for blinds 1.4 - 2 m;
superglue (for gluing fabric to metal);
double sided tape.

Instructions for creating blinds with your own hands from wallpaper step by step with a photo:

The taken measurements of the window are transferred to paper.
The length of the future product should be doubled. The paper must be folded in half - this will ensure the density of the blinds. In addition, another quarter of the total length should be added.
The resulting piece is folded in half. The edges of the material are connected with glue or double-sided adhesive tape.
Saw off a metal tube of the required length.
At the ends, using a stapler, pockets are made into which small weighting agents must be placed. You can also use a wooden plank or a plastic tube for a plumb line.
Glue is applied to the wallpaper and glued to the prepared tube.
Install blinds on the window. Marks are applied to the frame according to the size of the curtain. Using a drill, attach the resulting product to the window.

Do-it-yourself roller blinds can be made easily, quickly and efficiently; and they will be no different from the store options.

Two-layer paper curtains with an air gap: step by step instructions

This option is a little more complicated than previous models, which means it will take a little more time and effort than a regular pleated pleat. But such a product looks more stylish and respectable, and it also reliably protects the room from heat.

To make two-layer blinds, the wallpaper must first be marked and then cut into strips about 10 cm wide. The cut strips must be twisted into a tube and the edges glued 1 cm. There should be enough of these tubes to cover the entire height of the window.

When the glue dries, the tube must be pressed against a flat lamella so that the ribs on the sides of the part are clearly formed. It is necessary to fold so that the place of gluing is in the middle of the upper side.

Next, the middle line of each lamella is smeared with glue with a strip of about 1 cm, then all the elements are interconnected. During operation, the glue should not spread, so it is better to use dry. Leave a stack of glued tubes to dry completely. Only then can the resulting structure be deployed.

At 15 cm from the edges with an awl or other similar tool, holes must be made through which the cord is passed. It will not be visible from the outside, since it, threaded through the edges of the ropes, will pass inside.

You can hang such air blinds using two rings tied to the upper ends of the rope. They are hung on hooks that are screwed into the upper slope of the window opening. In the case of plastic windows, double-sided tape should be used, since the curtain made is very light.

Wallpaper blinds: video- instructions for creating a paper curtain

DIY blinds made from wallpaper are a great choice if you need to quickly hang a window. A paper curtain made from the remnants of unnecessary wallpaper is an excellent home-made protection for the room from the bright sun. Such blinds perfectly complement the design of an apartment or house and are a worthy alternative to ordinary curtains.

It is very simple to make such blinds for windows from wallpaper with your own hands and you do not need to spend a lot of money and time. There are a huge number of master classes and instructions for creating blinds from wallpaper with your own hands step by step. This is what explains the huge popularity of products.