home Tile

Decorative fence with your own hands. How to preserve the beauty of your favorite flower beds: we make fences for flower beds with our own hands from improvised materials Designing a garden fence with our own hands

Oh, how beautiful garden beds are, spreading delicate aromas and pleasing the eye with a riot of color. However, it is not enough just to dig up a bed and plant seeds, a real flower bed requires a competent fence that will prevent soil from shedding and protect the delicate roots of plants.

Before turning garden plot into a masterpiece of landscape design, decide whether your flower bed will be temporary or if you plan to install a fence that will last more than one year.

Plastic modular fences, which are sold in gardening departments, are quite attractive in appearance and very diverse. Such "fences" are installed in a matter of minutes and just as quickly removed in the fall or, if necessary, digging the soil.

Also, profiled plastic sheets (made of PVC or polycarbonate) or cellular polycarbonate can be used as fences. It is necessary to dig a narrow trench around the perimeter of the flower bed, insert the cut plastic into it, fill it up and compact the soil.

joints plastic panels it is desirable to coat with building glue or sealant. Cellular polycarbonate is glued with a one-component transparent adhesive.

The disadvantages of such fences are the high cost of materials and their low resistance to mechanical damage. Plastic fences often warp during watering or rainfall.

If you have accumulated glass containers or plastic bottles, it's time to make a creative flower garden.

Option one - vertical single-tier

This way of arranging the fence is so simple that even a child can handle it.

Step 1. Prepare the container. Mine, remove all stickers, fill each bottle with earth / sand, screw caps.

Step 2 Measure the length of the bottle with a tape measure. The resulting value is divided in two. This result is the depth of the trench to be dug around the perimeter of the flower bed. The radius of the bottle, respectively, determines the width of the groove.

Step 3. We turn the first bottle upside down, insert it into the trench, pour in the soil, spill it from the watering can, ram it. Closely insert the second bottle and repeat the ramming operation. We continue until the entire flower bed is fenced.

It is important that the "fence" does not stagger!

It is not necessary to use the same bottles. By alternately inserting one and a half and half liter plastic bottles, you will see how the fence becomes much more interesting.

Step 4. If the bottoms sticking up do not cause joy, you can decorate the fence by painting it with any paint for outdoor work. Also, as a decor, you can use flowers cut out of plastic and pasted on the fence in any desired order.

Bottle flower beds

Option two - vertical multi-tiered

Stock up on a sufficient amount of fertile soil, a shovel, a watering can and pre-prepared bottles.

To begin with, we dig a groove along the perimeter of the outer, largest ring of the flower bed. We insert a number of bottles, add soil to the level of the bottle bottoms.

The second ring is placed inside the first. The second tier will rise above the first. We carefully dig a new ditch, insert the bottles and pour soil into the center.

Narrow rings can be wired around the perimeter to reinforce the walls of the fence.

It is not recommended to make an excessively wide multi-tiered flower bed, as it will be inconvenient to plant plants in the central rings.

Tiered flower beds resemble a wedding cake. Plant low-growing flowers in them and enjoy the beauty of the garden.

Option three - horizontal

Step one. We prepare a sufficient number of clean empty glass bottles and cut the iron barrel across in two. The bottom can be left by making several drainage holes in it, or cut off altogether, which is more preferable.

Step two. We prepare a cement-sand mortar. In a bucket, mix the cement with sand and water so that the solution is thick enough and does not spread.

Step three. We put the barrel in the place where the flower garden will be in the future. With a trowel we spread a small pile of solution on the outer wall of the barrel, into which we immediately insert the bottle, pressing its neck against the iron. We put a new pile of solution on the wall and insert the second bottle as close as possible. Continue until the barrel is completely framed by the first row of bottles.

Step four. We lay out the second row in the same way, laying the bottles on the first row in a checkerboard pattern. We continue until the barrel turns into a stylish flowerpot. While the cement dries (about two weeks), it is better to cover the structure with polyethylene. So the frozen solution will be much stronger, and the risk of cracking will decrease many times over.

Step five. If the flowerpot is with a bottom, then we fill it with crushed stone, broken brick or other drainage. If you cut off the bottom of the barrel, then you can immediately fill up the soil and plant the flower seeds. It is recommended to decorate the upper part of this unusual fence with beautiful colored pebbles, shells, cones, or hide a noticeable strip of cement with moss.

Even if you and your friends are not car owners and do not store deposits of old tires in the garage, then in car repair shops they will gladly sell you several suitable used tires for a penny.

How to make a flower bed

Tires can be dug into the ground vertically, subsequently painted in different colors, carving unusual animal figures or cutting the upper part in the form of petals. If you are lucky enough to become the owner of a tire from a tractor or KAMAZ, then it makes sense to place it horizontally, filling the ground inside and breaking a flower garden.

If you get several tires of different diameters, build a multi-tiered fence for the flower bed, simply placing the tires like a pyramid. Of course, soil must be filled inside each ring before installing a subsequent, smaller diameter.

Advice! For painting, use only waterproof enamels!

Video - Do-it-yourself fences for flowerbeds from old tires

We build fences for flower beds made of bricks

If you plan to build a capital flower garden, then you should take care of a reliable fence, for example, a brick one.

Before construction, prepare the following materials: bricks, cement-sand mortar, sand, level, tape measure, pegs, cord, shovel and trowel.

Step one. We make markings on the ground, determining the perimeter of the future flower bed.

Step two. By marking, we dig a trench about 10 cm deep.

Step three. We fill the sand with a layer of 5 cm and carefully ram it, spilling it with water.

Step four. We lay out the first two rows of bricks without cementing them and leaving a gap of 0.5 cm between the bricks. This is necessary to prevent moisture stagnation in the soil and root rot. We check the evenness of the masonry with a level and knock out the bricks with a mallet.

Step five. We drive in the pegs and pull the cord so that it is more convenient to lay the masonry. The third and subsequent rows are laid out without gaps, using cement mortar. We immediately scrape off the excess from the wall. If desired, immediately after laying, you can do the jointing.

The cement will dry for about a week. During this period, it is not recommended to carry out land work and break a flower garden. When the cement sets, we fill the flower bed with a layer of drainage, fertilizers, soil, and plant plants.

Advice! If you use bricks of different colors in the construction of the fence, then the flower bed will be much more interesting.

If the flower bed is small, then the bricks can be laid without mortar at all, filling up a sand cushion. At the same time, it is not necessary to lay the brick flat; the fence made of bricks installed in a sand cushion at an angle looks original.

Also, instead of bricks, you can use natural stones and sand. Laying of stones is carried out without erecting a foundation, and the stones themselves are fastened together with a solution. It is advisable to lay out so that there are minimal gaps between the stones.

Video - Options for fencing for flower beds

Fences for flower beds made of wood

Wattle is a classic of the genre. We drive in pegs or dry branches at an equal distance, which we braid with flexible willow rods. Finally, we fill the wattle with soil and plant flowers.
Decorative fence made of boards. We lay out the boards in a row, nail the horizontal fastening jumpers. We collect several of these "panels" of the desired height. Dig a few holes in the ground. The distance between the pits is taken equal to the width of the panels. We insert wooden blocks into the pits, treated with an antiseptic and covered with bitumen from below, after which we pour concrete and wait for it to dry, following the strict verticality of the columns.

In conclusion, it remains only to nail the panels from the boards to the posts, add soil and paint the fence.
Bar fence. Such a fence can be installed both in compliance with the same level of all the bars, and by hammering each of them into the ground to a different depth. Do not forget about the treatment of the columns with an antiseptic so that the flower bed stands as long as possible.

Do not be afraid to experiment, coming up with non-standard designs for flower beds and decorating the garden in an original way. An old one can act as a fence for a flower bed wooden boat, plastic and ceramic dishes, flower pots lined up, a wooden two-wheeled wheelbarrow, a large wicker basket, an antique chest without a bottom, and much more.

Also read the article on our website - how to make a flower bed with your own hands.

Video - Do-it-yourself fences for flower beds. Design Ideas

The garden has been dug up, the seedlings are ready for planting, but in addition to vegetables and useful crops, I would like to pay attention to the beauty of the garden, namely the fencing of the flower beds. Flowers growing one by one or in pairs, descending in garlands from balcony boxes, or arranged in a single composition under the windows of your beloved home, will give joy after labor day and take a break from work. But how to keep this beauty? How to protect flowers from the ubiquitous line of a lawn mower, from children always running somewhere, from dogs who strive to lie down on them? Let's consider a few examples of making a fence using improvised materials and a minimum number of tools.

natural stone border

Stone is not an enemy to plants. Many people know that the sculptures created from durable granite, after centuries, have conveyed to this day the beautiful faces of ancient women and the muscular torsos of men. Frozen in stone, they still amaze with their beauty.

And why not use this durable material to decorate adorable petunias, lupins, cosmos, marigolds. Granite and marble, of course, not the most cheap option, but you can resort to the help of improvised representatives of the stone world, for example, cobblestones, which can be found almost everywhere. Having made a considerable margin, you can impose a fairly large one, thereby protecting it from lawn mowers and other cutting tools.

Variants of the forms of a natural stone fence depend only on the author's imagination and the amount of source material. The advantage of this fence is durability, and the disadvantage can be considered a small height and, over time, natural subsidence deep into the soil.

Fence for a flower garden made of wooden pegs

Tired of the old plinth, why throw it away? Miniature, up to 20 centimeters, wooden fences look very unusual and pleasant, enclosing plants of medium height. The construction of such a fence will take several hours of time and a couple of meters of the old plinth.

First of all, you need to decide on the height, mark it on the base, and saw off the pegs that will make up the fence.
For the convenience of inserting such blanks into the ground, it is advisable to make an acute angle from one edge, and leave the top straight.
Pegs are either dug in or driven into the ground by 5 - 10 cm, for greater strength. Thus, the workpiece is a peg 30-35 cm long.

The advantage of such a fence is its original shape. The disadvantages include the difficulty of setting a straight line, but using the level, you can achieve greater accuracy.

Glass bottle fencing - simple and affordable

Glass is not a new material, and certainly not expensive. After all, for sure in your house there is sometimes a bottle of beer, champagne, Coca-Cola or lemonade by the trash can. They will serve as an excellent basis for a decorative fence. All you have to do is collect required amount glass bottles. For an average-sized flower bed, approximately 20-30 pieces will be required. During the winter period, it will not be difficult to collect such an amount.

The construction technology is extremely simple, tearing out a small hole, you need to stick a glass bottle upside down and dig it in for greater strength. To keep a straight horizontal line will help the usual building level.

Glass bottle fences are durable and look great next to low plants.

Considering possible ways improvement of a flower bed, each owner is looking for the simplest and most affordable option. It's easier than building a fence out of crushed stone, wood, or glass bottles. Let's analyze a few more options for decorating floral splendor:

Wooden rods and tree branches as a decorative fence

Rods and branches - to the fire or to work? To build original barriers from the branches of an old tree that fell under an ax - there is nothing easier! Naturally, branches are taken as the basis, but their selection is very important.

To decorate a flower bed, it is advisable to use straight or slightly curved rods. Branches that have knots or shoots are not suitable for work, because with the growth of green spaces, the stems will hang on them and cling. It is advisable to clean straight branches from the bark and dry. An ideal option is also to impregnate them with antifungal agents, but not necessarily.

The construction of such a fence is as follows:

Straight base stakes are driven into the ground at a distance of 10-15 cm, rods or branches are laid out between them;
Fastening, for greater stability, is carried out with twine or fishing line. The height of the structure depends on the number of rows thus laid.

The advantages of the design are ease of execution and natural appearance. The disadvantages include a small durability, in general, from 2 to 3 years, and the possibility of curvature under the influence of weather conditions.

Another option for wicker fences is a wicker fence. It looks very aesthetic. The method is similar to the construction of branches and rods, only due to the length of the base material in the process of laying out the rows, the main pegs-supports are intertwined.

The advantages of this version of the improvement of the flower bed is its excellent combination with the landscape and aesthetically simple appeal. The downside is that the short life and possible corrosion of the material. Wood processing tools will help to correct these shortcomings.

Macrame in garden design

The macrame technique, which is based on a special weave of threads, can be a wonderful and unusual option for decorating a flower bed. Naturally, strong twine will serve as the main material. Any drawing can be taken. Detailed schemes can be found on the Internet or in needlework magazines.

Wooden pegs will serve as fasteners for the original baubles, which can also be braided to match the main motif. The advantage of this work is its originality. The disadvantages include a fairly long duration of work and a short service life.

A fence of dishes (photo)

Dishes beat fortunately. There are three plates left from your favorite service, which are not only embarrassing to put on the table, but also insulting to tears. The saucer cracked or split in half, it doesn’t matter, we collect fragments for the fence, they will serve as an excellent basis for the creative design of the flower bed.

Simply stuck into the ground or embedded in cement mortar, once works of ceramic art, today become original decoration flowering plants. The simplicity, durability and unusualness of such a fence is a definite plus, only some danger to children can be attributed to the minuses, because it can crack and injure.

DVDs playing in the sun

Many video and audio enthusiasts often have enough a large number of unnecessary discs that have already played their content millions of times and lost their freshness and quality. By combining them with a paper clip, wire or fishing line into a single canvas and fixing them on the base-pegs, you can give the flower bed an unusual, bright and shiny look in all respects.

The disadvantage of such an undertaking is only a short period of operation of this fence. For the rest, she can become original solution in landscape design of any site.

Plastic bottles - a flight for fantasy

Remaining after feasts can also be useful to a decorator flower beds. Inserted like glass bottles, carefully painted in different colors, they will illuminate the green space with bright notes.

However, it is worth remembering that plastic is subject to deformation when the temperature changes, therefore, before directly inserting the bottles into the ground, it is worth carefully filling them with sand. Possible deformation, under the influence of weather conditions, is a minus of these fences.

Decorative fences enclosing your flower garden

Items such as an old fence, the remains of roofing tiles or wall plastic, unused metal tape in a roll, forged products and other materials at hand can be an interesting basis for creating a flower fence.

Their presence, in various configurations, will bring a touch of chaos and modern colors to the green ornament of plants, forcing hosts and guests suburban area look at the classic forms from a different perspective.

A variety of design options for flower beds, at times, amazes the most experienced grower. Wood, glass, stone chips, knitting, weaving and many other materials reveal countless creative ideas of the owners of summer cottages and simply lovers of aesthetics and beauty.

Consider a few more ideas aimed at fencing for flower beds, which use improvised non-standard materials.

Stone border - a classic version of the fence flower beds in the country

The creation and design of flower beds is undoubtedly a fascinating creative activity, and the flight of fancy here is hardly limited to the usual forms and materials.

Creating, against the backdrop of favorite plants, an object of landscape art, each owner will be able to feel like the creator of something new, unusual, original. The main thing is a positive attitude and focus on a truly grandiose result.

Probably, each of us cannot remain indifferent to the lively and bright beauty of flower beds. Nevertheless, the decorative fences and fences that frame them also attract attention and remain in memory. Moreover, the latter, decorated with talent, sometimes deserve more attention than the flowers themselves.

Of course, the main purpose of decorative hedges and fences is precisely the decoration that is in harmony with other elements of the landscape. At the same time, the fences turn the flower bed into a complete composition, divide the space, and also protect the flowers from the excessive attention of kids and animals.

The fence is small but remote: it decorates and protects

What are fences for flower beds?

There are different types of fences, and the choice depends on the specific purpose that the flower fence will perform:

If you just need to separate the flower garden from the lawn, then a mini-fence up to 7 cm in size will do.
In the case when the fence of the flower bed is at the same time a border for garden path, make the height of the fence 10cm.
If you need to block the roots of flowers or plants, pay attention not to the height of the fence, but to the level of its immersion in the ground. It must provide sufficient strength, for example, brickwork or plastic tape.
When it is necessary to protect flowers from cats, dogs, overly curious children, make a fence at least 0.4 m high. Of course, the flower bed will look unaesthetic if it is closed with a solid fence. Use a wooden, plastic or metal picket fence to make your fence translucent.
For a rose garden, products up to 50 cm in height are suitable, because they will not catch the eye against the backdrop of tall and lush flowers.
A mixborder of low flowers and plants is enough for flat pebbles, paving stones or a border for paths laid out along the perimeter of the flower garden.

Traditional wooden railings

Wooden fence on a metal frame - a combination of simplicity and reliability

Wood is one of the most commonly used materials in the construction of a fence for a flower bed. It does not heat up from the sun, it is completely safe for plants, economical, convenient and pliable for skilled building hands. It is not difficult to install the simplest wooden fence for a flower bed from twigs, slats, logs, planks, slabs.

A significant drawback is its fragility, susceptibility to the destructive action of water, sun and wind, which to a certain extent is solved by various impregnations and regular coloring.

What are wooden fences:

a border of logs, that is, stakes buried in the ground;
picket fence: it happens as simple, from the same ordinary planks; and complex - from planks of various sizes and qualities;
a mosaic of wood cuts or cross sections of a log.

We make a fence from wooden pegs

Limiting flower beds with wood chocks is one of the most common and simple types of flower garden fencing in the private sector, in the country or in the backyard. You will need logs of the same diameter. Choose the height according to your desire, but keep in mind that 20cm must be driven deep into the ground. A well-installed fence made of carefully crafted antiseptic logs will last up to 10 years.

It is important to treat a log fence well from decay

prepare logs of the desired length;
peel them from the bark and treat with an antiseptic, otherwise the chocks can quickly rot;
dig a ditch twenty centimeters deep around the perimeter;
install the chocks evenly and tightly;
tamp the ground well and cover with soil.

Making a board fence

The board fence for the garden turns out to be beautiful and “translucent”, because the boards are mounted at a certain distance from each other. Making it more difficult than the previous view. Step by step recommendations:

prepare timber, boards, wood screws or ordinary nails, a screwdriver or a hammer;
vertically and at the same height, drive the support bars into the ground in increments of 0.7 m;
fasten the boards horizontally to the top of the beam, the end part of the board should not protrude beyond the beam;
the next board is installed 10 centimeters lower from the edge of the board installed earlier;
such a system for attaching boards is performed for each section.

In addition to the fence itself, it is important to make a gate to the garden

Decorative homemade "lattice"

It is good to protect tall plants and flowers in the garden with a light and translucent “lattice” fence, which is easy to do with your own hands. A "lattice" of large wide slats will help you decorate and thematically divide zones on a personal plot, for example, to separate a recreation area or a place to store inventory from the general area of \u200b\u200bthe site.

Take two beams as supports for one section and rails for the crossbars, wood screws 3x30mm and 3.5x45mm. You will need a screwdriver, a hammer will not help.
Drive in the supports.
Retreating 30 millimeters from the upper edge of the support beam, attach the logs. Use 3.5x45mm screws.
Attach the lower transverse board at a distance of 0.5 m from the upper log.
Fasten the first rails from left to right. Use 3x30mm screws. The first plank is installed at the point of attachment of the upper log and to the lower frame 10 cm from the support beam. The following rails are attached with a gap of 10 cm.
Then all subsequent rails are fixed. As a result, you will get a beautiful patterned fence.

decorative fence from laths

Vine basket

A fence of this type is not very durable, but it looks original. The basket "weaves" around the perimeter round flower bed. Wattle pleases the eye and protects plants and flowers. A decorative "basket" can be made with your own hands from branches or twigs of a vine, hazel, birch branches, vines. Branches for fencing must first be cleaned of bark. The height of the wattle fence is greater, the smaller the diameter of the structure.

Vine flower fence

Country decorative fence made of branches

A wicker fence will decorate your flower garden and help decorate household plot in country style. Wattle is also made from twigs or vines, wires, multi-colored hoses and everything that looks like twigs - turn on your imagination and get an original decoration!

A wood-polymer composite is popular, which lasts a long time and does not respond to precipitation. Stakes can be pieces of rebar or plastic tubes. Braid manufacturing sequence:

Start with supports. Set them at a distance of 50 centimeters from each other.
Start weaving from below. Attach the vine to the first support with wire or screws, then let it go around each support post.
Fasten the junctions of the twigs with wire. The weaving system is uniform over the entire diameter of the basket.
After the end of the weaving process, you can treat the twigs with an antiseptic to prevent rotting. Do you want to make the basket even more aesthetically pleasing? Coat the product with varnish.

Decorative fence made of branches

Metal fences

Decorative cast-iron and iron fences are popular with owners of villas, large household plots, lovers of elite and expensive style in the private sector. Forged fences look expensive, they are made by special companies for individual orders. Such fences are durable, they look very beautiful. You need to choose them very carefully, coordinating the design with the overall landscape. The only negative is that such products are quite expensive.

Plastic fence looks like forged metal

Plastic fences

Plastic is quite popular in the manufacture of fences for flower beds and flower beds. Advantages of plastic products:

variety of shapes, colors and sizes;
ease of manufacture and installation;
durability - plastic resists precipitation, moisture, ultraviolet rays;
the ability to easily choose a product suitable for the overall design of the landscape.

Types of plastic fences

Plastic fence for flower beds - fast, cheap and beautiful

Decorative plastic fence comes in different types. Sectional fences can be of various shapes and colors, they already have stakes for mounting. Just drive the pegs into the ground, and the low fence is ready. Plastic borders can take any shape, which will allow you to make a flower bed of the desired shape. They are smooth or have a surface structure with a pattern, imitation of stone or brick is possible. The easiest option is a roll of plastic tape.

The fence is hand-carved from a piece of plastic

Tips for installing plastic products:

You can decompose the purchased plastic product under the sun. Warm plastic will be more pliable and easier to install, take the desired shape.
Dig a groove in the ground.
Measure the tape to the desired length. Connect the pieces of tape with a staple gun.
Install the plastic in the groove and tamp.

A hedge of bushes and lilies of the valley is really alive

Hedge

November 21, 2017 / / to / from

Fencing for flower beds is an important part of the landscape design of the land, which can be made from any improvised or ready-made building materials. The fence plays not only a decorative role, but also gives the flower bed a perfect, well-groomed appearance, creates harmony of landscape composition. It is also worth noting that with its help you can divide the land into convenient zones, create protection tender plants from unwanted guests.

Types of fences for flower beds

Fences for flower beds have different functional purposes, which means that fences are selected accordingly, depending on the purpose of their use:

Section of the lawn and flower garden. For this, a small fence, the height of which is not more than 7 centimeters, is enough.
Border for a path or path. IN this case the fence should be more powerful, and its height should be 10-15 cm.
Raised flower beds. They are best lined with stone or brick, as you need to keep the soil within a certain space. A strong and stable fence will allow the flower bed to remain unchanged for a long time.
Root blocking. If you do not allow the flower bed to grow beyond its limits, then you need to take care of a high-quality fence. The fence should sink deep into the ground, it is best to use plastic or masonry, wood is not suitable.
Protection from animals and children. If you protect plants from animals running around the territory or inquisitive children, then the fence must be installed high (about half a meter). To maintain visual appeal and aesthetic appearance, you need to use picket fences. The material can be metal, plastic or wood.

It is also worth noting that the choice of the type of flower bed fencing is influenced by what plants are on it. For a front garden or a rose garden, it is best to use a half-meter-high fence, but it is enough to overlay a mixborder with paving slabs or stones. In general, one should take into account the dimensions of plants and select fences according to them, because lush roses or peonies will look ridiculous with masonry, which visually will simply be lost there.

Wooden fence for a flower bed

Wood is a natural material that will look very attractive and cozy. Wood does not lend itself to heating from the rays of the sun, does not reflect light, which means it will not damage plants with burns. It is very easy and simple to work with this material, you can make a fence yourself in just an hour. The only and main drawback is fragility, however, by treating the tree with special materials, you can extend its service life. If you regularly paint the fence, then this will also affect the duration of its "life". Any type of wood can be used as a fence, because it will always be appropriate and natural.

Types of wooden fences:

Palisade.
Fence.
Mosaic.
Fencing made of logs or branches.
Wicker vine.

Alternatively, wooden chocks can be used. It is enough to pick up logs of the same size and diameter, wrap them in a roofing tape, before treating them with an antiseptic. After preparation, you can safely install a fence by digging chocks to a depth of about 20 cm.

Stone fence

In this case, stone means brick, natural and fake diamond, as well as paving slabs. Masonry can be carried out both dry and using solutions. If desired, the stone is combined with each other or with wooden elements. The main advantages are durability and a high level of reliability of the fence, the only drawback is the high price.

Paving slabs have different shapes, configurations and colors, which means that they can be used for a variety of flower beds, ideal for laying miniature flower beds.

metal fence

Metal fences of everything look very stylish, but their price bites a little. You can use cast, forged and welded fences that will elegantly complement the graceful look of the flower bed and serve for a very long time. The production of such fences is carried out individually to the order of the owner. The main thing is that the fence fits the landscape and fits into the overall design. They can also be used as supports for climbing plants.

plastic fencing

Plastic looks very interesting and, first of all, captivates with its performance: it is resistant to temperature effects and moisture, it lasts a very long time, while maintaining its original shape. Such a fence is very easy to install and dismantle, it will not be difficult to replace it. It will also be a plus to have a wide choice of color scheme, shape and size of the fence. By choosing a fence according to the style and landscape design, you can create an interesting composition, in addition, you can use plastic that imitates other materials (stone, wood).

A number of basic options for plastic fences:

sectional fence.
Plastic border.

Fences from improvised materials

A fence made with your own hands from improvised materials always looks very interesting, elegant and unusual. The whole advantage lies in the fact that in this way you can create a unique flower bed with an original fence. The most eminent homemade fence for a flower bed is made from plastic and glass bottles. To do this, it is enough to collect bottles and bury them in the ground upside down. In order to plastic bottle retained its shape and attractive appearance, it must first be filled with earth, pebbles or sand.

Also, as improvised materials, you can use old vinyl records, porcelain plates from sets that were partially broken and are no longer used.

What will be the fence for the flower bed depends only on the desire, imagination and financial capabilities of the owner of the land. Almost any material can be used for fencing, the main thing is to do it right. The most spectacular and expensive options are always interesting, but not everyone can afford it; you can always find a way out of this situation at your fingertips, using all stale things for the fence, for example, car tires.

2017-11-21 16:45:24 2017-11-21 16:45:24 Stylish and spectacular fences for flower beds: 100 attractive ideas

Zoning is very important point when designing a comfortable and beautiful site. You can make a decorative fence with your own hands. Fences for your own home, photos of which you can see at the end of the article, may be:

a means of separating recreation and work areas;
restriction for berry or vegetable beds;
decorating the geometry of a flower garden or an original flower bed;
site fencing.

Varieties of materials

Before you make a decorative fence on your own territory, you need to decide what task it will be assigned to:

protection from prying eyes or various kinds of pests, which can only be achieved if there is sufficient height and the absence of open space;
barrier or zoning of the site;
decoration - a fence of a purely aesthetic nature, often installed in a front garden or recreation area.

If we talk about the materials used, then it can be:

Wood, represented by both standard boards of the required size, and natural materials that nature has created - a snag, a bamboo stalk, a rod.
Metal, often represented by forged elements. Such a design is necessary if the fence pursues the performance of a blocking function. Without forging experience and a special tool, it is unlikely that you will be able to independently complete such a fence.
Stone - great material for the "front" fence or for original design flower beds.
Plastic can be used to make a fence for a plant composition or to mark the border of a garden path;
Brick is used to build any fence that can perform all the above functions.

Production of various fences

For self-manufacturing wood fence will require the following materials:

boards;
bars;
hammer and screwdriver;
nails and screws.

So, we begin to make a decorative fence:

We carry out strictly vertical installation of support pillars into the ground.
We fix the upper crossbar on the bars, and then the lower one.
We fix the boards around the entire perimeter of the fenced area.

You can decorate the site picturesquely by using:

willow or apple twigs having a thickness of not more than 2 cm;
bars or stakes;
wires;
wood screws.

The manufacture of this type of fence from improvised materials is as follows:

Installation vertical supports with a step of 40-50 cm.
Weaving, the beginning of which falls on the bottom row and is fixed with a wire. The twigs should go around each peg. At the junction of the rods, you should also use wire for fastening.
Mandatory coating of the finished structure with varnish.

The most durable and picturesque decorative fences for flower beds are stone fences. Various flowers and greenery look wonderful against the background of the rough texture of a stone, for example, cobblestone.

For laying the first row, you will need a concrete mix and tile-shaped stones. All subsequent rows must be laid in such a way that the seam does not coincide with the previous one. It should be remembered that the rows should be approximately the same height, and the strength of the fence depends on the quality of the sand-cement mixture.

Huge popularity among summer residents went to decorative brick fence. A front garden, lawn, flower bed or lawn - all this can be fenced off with a beautiful and reliable brick fence. Installation of such a fence is extremely simple - brickwork should be carried out along the perimeter of the detached object. The end part should act as a reference point for the slope, then the fence will look like a kind of jagged fence.

The original fence can be made by installing clinker, forming an oval or circle.

Making a decorative fence

In order to ennoble the site, it will not be difficult for a person with a developed imagination to make a wonderful fence, even without the use of decorative blocks, that is, only from improvised material.

Summer residents who want to equip an original flower bed or flower garden love to use used car tires. In addition, they can be used to separate the lawn, paths or beds.

You can find original fences made of glass bottles. Original mini-fences are obtained from glass bottles dug upside down. By the way, multi-colored containers will look much more attractive.

From such a versatile material as a plastic bottle, a beautiful decorative fence is also obtained. So that the bottle does not lose its shape, you need to pour sand or pebbles into it, and it will become more attractive or painted in any color you like.

The most original country fence of the present time is a hedge. For the manufacture of such a fence, minimal financial costs are required, and most importantly, it does not require almost any maintenance. It looks very nice as a hedge girlish grapes, needles or roses. This fence is best made from proven plants that exactly suit our climate.

A temporary protection against an intruder and the main object of admiration will be a fence made of branches, which is popularly called wattle. This is the most a budget option fences, because you don’t need to buy anything - branches of various thicknesses and twigs can be collected in the nearby forest, in which such building material always enough.

In general, for the manufacture of a good decorative fence, not only on the site, but also for its protection, which will further confirm your creativity, you do not need so much. The main thing: a good idea, the right amount required material close at hand and a positive attitude. Different types decorative fences you can see in the photo and video.

Video

This video shows how you can beautifully arrange the beds in the garden and vegetable garden, dividing them into zones:

This video shows how you can perform zoning of the site with homemade boxes: