Unusual wooden tables with their own hands. How and from what to make a coffee table with your own hands (50 photos). DIY marine-style table

Building a coffee table with your own hands is the perfect way to give the interior originality and surprise guests. This piece of furniture is an integral part of any recreation area and always attracts attention.

Build a coffee table with your own hands - the perfect way to give the interior originality and surprise guests

Comprehension of the science of turning ordinary things into the highlight of the situation is subject to everyone. And to understand how to make a coffee table with your own hands, you just need to be inspired creative ideas, show your own imagination and make a little effort.

What kind of source materials do not use interior designers in their work. But the undoubted favorite is always wood. She is loved for her naturalness, environmental friendliness, natural texture and color palette.

Original coffee tables made from stumps or saw cuts of a natural tree trunk, despite their apparent simplicity, will become a completely unique piece of furniture and will fit perfectly into the design of a bedroom or living room decorated in eco style.

What kind of source materials do not use interior designers in their work. But the undoubted favorite is always wood.

• blank (stump with a part of the root system or saw cut of a whole tree trunk);
• chisel;
• a hammer;
• saw;
• building level;
• manual or electric planer;
• grinder or sandpaper;
• brush.

How to make:

• a wooden blank of the required size must be thoroughly dried in a warm, dry room;
• using a hammer and a chisel, remove the bark from the tree (if desired, the bark can not be removed);
• using a saw, form the base of the table or legs from the root branches;
• check the evenness of the countertop with a building level, if necessary, trim it with a planer;
• clean the workpiece from debris and chips with a brush;
• sand the cuts and the side surface of the stump grinder or fine sandpaper.

The stump processed in this way is in itself a kind of small table. If desired, it can be primed with a bioprotective primer, painted with paint, applied with various patterns and varnished.

Gallery: coffee table made from improvised materials (25 photos)

Wood coffee table (video)

woody layered fantasy

Plywood coffee table - more affordable alternative natural wood. Multi-layered, faceless and unsightly at first glance, the material has almost the same qualities as wood, but at the same time it is an ideal basis for simple furniture design. Plywood elements can be given any shape: rectangular, rounded, broken, which stimulates the master to bold design experiments.

Having conceived a plywood coffee table, work should begin with a drawing, using existing sketches or creating your own. In the latter case, we will get a 100% original product at the output.

Plywood coffee table - a more affordable alternative to natural wood

How to make small round table from plywood on rectangular bases:

• prepare a drawing including 4 parts - 2 identical round shapes for the base and countertop, 2 identical rectangular shapes for the table supports;
• transfer the detail patterns onto a plywood sheet with a nominal thickness of 9 to 30 mm (the thicker the sheet, the stronger the final product will be);
• cut out the required elements with an electric jigsaw or hacksaw;
• grind the ends of each template with a grinder;
• in rectangular shapes in the center, using a router, make cuts 1.5-2 cm wide so that you can cross-insert the parts into each other;
• connect the rectangular parts, after having smeared the joints with wood glue;
• fix the tabletop and the base of the table on a wooden cross with liquid nails (to increase the strength of the product, additionally fix the round parts with self-tapping screws or tongues);
• process the finished product with stain, paint (optional) and open with varnish.

The simplicity of the design makes it easy to screw the wheels to the table. Interior design in which plywood furniture will look great is grunge, minimalism, constructivism.

The idea of ​​a square shape

A coffee table made of drawers is another unexpected idea of ​​designers, captivating with its simplicity. Rectangular storage containers of various sizes are a universal basis for creating furniture with your own hands. Unusual tables, chests of drawers, cabinets and chairs can be assembled from simple plastic drawers, but with a more elegant and vintage look. homemade furniture easier to achieve using antique wooden boxes.

What you need to make a table from boxes on wheels:

• 4 wooden boxes, identical in size;
• a sheet of plywood with a thickness of at least 10 mm;
• 4 swivel casters for containers, trolleys and scaffolding;
• puncher or screwdriver;
• wood glue;
• self-tapping screws;
• fasteners (dowels);
• impregnation for wood;
• water-based varnish;
• brush.

A coffee table made of drawers is another unexpected idea of ​​​​designers, captivating with its simplicity.

How to make a table:

• clean the boxes with sandpaper, apply impregnation and open with varnish;
• let the product dry;
• put the boxes on their side and put them together in such a way that a table is formed (at the same time, peculiar shelves are formed on the side of the structure);
• mark the mounting points and drill holes for fasteners;
• connect boxes;
• using self-tapping screws, fix the wheels at the corners of the plywood sheet;
• fix the fastened boxes on the plywood base.

In the resulting recess in the center of the product, you can pour a variety of decor, put a vase of flowers, a lamp, put magazines or books in the side shelves, turning the coffee table into an original bookcase. This type of furniture will fit well into the design of a home furnished in eclectic, country or French Provence style.

Automotive element in the house

A completely unusual piece of furniture can be made using an old car tire. This technique is used by the most fashionable designers, and perhaps it is this idea that will form the basis for creating an exclusive coffee table with your own hands.

For the coffee table you will need:

• old tire;
• plywood;
• rounded wooden beam for the manufacture of legs;
• studs and nuts;
• liquid Nails;
• glue gun;
• drill and screws;
• natural tourniquet for decoration;
• finish coating.

How to make:

• choose the most surviving wheel, wash and dry;
• saw a wooden beam into three equal parts and make table legs (if you have your own lathe, it is desirable to make supports of a conical shape);
• give the tire stability with the help of studs, nuts and hard plywood inserts in three places;
• put a wooden tabletop on liquid nails and fix it on the tire with self-tapping screws;
• attach the legs to the base and screw to the tire (it is desirable that the screws through the rubber enter the plywood stiffeners);
• using a glue gun, fix the natural twine in the middle of the countertop;
• braid the countertop in a circle from the center to the edges, constantly gluing the rope;
• continue decorating until the twine covers the entire rubber surface of the tire;
• fix the end of the braid with glue and a metal bracket;
• cover the table with a top coat (wax or varnish).

A tire table does not have to be decorated. By installing special wooden limiters at the bottom of the tabletop, it can be made removable like a lid, which will allow you to store various useful little things inside the tire.

A table made from a car tire and decorated with a towed rope can be a highlight of a fusion or loft style interior, and a brutal rubber table will fit perfectly into high-tech and techno style.

Exhibit of the travel club

Retro style lovers and avid travelers who want to express their passion in an interior setting can easily make a table with their own hands from an old grandfather's suitcase.

What you need:

• suitcase with rigid walls;
• wooden furniture legs or wheels;
• a sheet of thick plywood;
• screws and screwdriver.

Even a strong suitcase is better to be further strengthened with plywood sheets. This will allow you to get a flat "tabletop" without dips, on which you can put both plates for food and glasses. Product manufacturing steps:

• cut 2 templates from plywood and attach them from the inside to the walls of the future suitcase table;
• make markings for the legs and screw them to the bottom plywood template inside the suitcase with screws;
• paste over the inner surface of the resulting table with a baize, linen or felt.

Original tables from suitcases can be decorated to your taste in a variety of ways. They are decorated with travel stickers, envelopes, stamps. The decor made using the decoupage technique with the effect of aging looks very profitable and elegant. The interior design, in which the table-suitcase will look organically, is avant-garde, eclectic, loft and fusion.

DIY coffee table with LED backlight (video)

Europallet product

Few people know that it is possible to create an exceptional home interior using ordinary wooden production pallets (Euro pallets). The process of making a coffee table from one or more pallets will not require much effort, since the product itself has an extremely successful shape.

Required materials and tools:

• wooden pallet;
• swivel wheels;
• brush;
• Grinder;
• wood glue;
• drill and screws.

Assembly order:

• clean the pallet from dirt with a stiff brush;
• sand the boards;
• coat the structure with a primer for wood products;
• fix the swivel wheels at the corners of the base of the product with a drill and screws.

Having redone the pallet, you should give it a designer look with the help of finishing. This will help white or bright acrylic paint, water-based varnish. The table from the pallet can be painted all over or an original drawing can be applied to its working surface.

If desired, the pallet can be ennobled by placing on top of impact-resistant glass of the same size as the pallet or treated plywood. A pallet table can be static and just stand on the floor, or it can be able to go to a place convenient for the owners of the room if spinning wheels are attached to its base. In addition, rubberized wheels do not scratch the floor.

New life for old things

Changing the windows in the apartment for fashionable metal-plastic, many throw away the old frames, not even suspecting that an amazing home-made coffee table can be made from them.

All you need to do is:

• remove metal fittings from the frame;
• clean up paint residue;
• strengthen the corners of the structure with additional fasteners;
• lay a frame with glass on unusual legs (piles of books or packs of old magazines can serve as supports for such an impromptu table).

In the case of using a double frame, it is permissible to have the most diverse decor between the glasses:

• beads;
• colored sand;
• sea ​​shells;
• dried flowers.

Changing the windows in the apartment for fashionable metal-plastic, many throw away the old frames, not even suspecting that they can be used to make an amazing home-made coffee table

Not a single guest will remain indifferent when he sees such a creation of the master. Interior design, which involves the presence of hand-made furniture from old things, is eclectic, kitsch or pop art.

As a basis for the table, you can use:

• cast iron battery;
• skeleton of an automobile engine;
• barrel, grandmother's chest, large stones;
• rolls of old wallpaper.

From water pipes unusual legs will turn out, and from plastic, a door leaf or an old mirror - an original countertop.

Using fragile glass as a work surface, one-leg structures should be avoided; those who have small children and large pets in the family should be careful with glass.

Using improvised materials, showing imagination, you can make an original and multifunctional transforming table, an exclusive bedside table and a comfortable sofa table-shelf.

Anyone who has ever tried to remake banal things into unique "living" interior items is unlikely to be able to stop. Independent design and manufacture of furniture is a fascinating, addictive process, which for many becomes a real hobby. Homemade coffee table is the perfect item for the first experience. Out-of-the-box thinking, original design approach and a bit of craftsmanship - all that is needed for success.

Attention, only TODAY!

Coffee table can be just a functional surface, or it can become an excellent decorative interior detail.

The table made of natural tree. You can buy it at the store or make on one's own.

Magazine tables, handmade, decorate in various ways, sometimes turning an ordinary piece of furniture into a masterpiece design thoughts.

Coffee table options

View, the size and decor of the coffee table can be perfectly different. The only limit is your imagination.
Most common and available in the manufacture of tables:

• square or a rectangular wooden table;
• round and oval table;
• table transformer;
• glass table;
• table from combined materials (e.g. glass and wood).

Note! A set of two or three tables will make sitting in the living room even more comfortable: each guest will have a personal surface for a cup of coffee or a glass of wine.

What to make a table

materials, which are used to make magazines tables:

• wood(solid array, timber);
• hemp;
• glued panels;
• plywood;
• glass.

But on my own make coffee table can be not only from traditional materials. Tables made from henchmen funds and old things such as suitcase, window frame, large coil, pallets, etc.

Important! If you choose a glass table, make sure that it is made of high quality tempered glass, which will ensure the reliability, strength and safety of the product.

Materials and tools

The most beautiful and various the shape of the tables are obtained from wood, chipboard or MDF. The material for the coffee table should calculate in advance.
For a simple table, the following are enough elements:

• bars for legs (4 pcs.);
• thick board, panel or a sheet of plywood for countertops;
• corner mounts for connecting the tabletop with legs (4 pcs.);

For round coffee table you will need:

• 2 round details from chipboard or MDF (tabletop and support for the wheels of the table). Diameter 60 cm;
• rectangular pieces for legs(2 pcs.). Size 60 x 40 cm;
• wheels(4 things.).
• putty for wood;
• glue carpentry (for wood).

You must also purchase impregnation and varnish so that both pollution and give the product beautiful appearance.

In addition, to make a coffee table, you will need the following: instruments:

• a hammer;
• nails;
• screwdriver or screwdriver;
• corner mounts(not necessary);
• Master OK.

Round coffee table

Must be ordered in advance details from fiberboard or MDF. Can do them on their own, but it should be noted that the table top and castor support must be ideal forms. This will give the coffee table a sophisticated and careful view.

Stages of work

Step 1. In rectangular shapes, you need to make small cuts in the center to fit them into each other. Cuts are made according to thick sheets of chipboard (MDF).

Step 2 We connect the rectangles with the help of cuts. Lubricate the joints with carpentry glue. This is necessary so that the parts of the table hold firmly.

Step 3 We apply from above countertop. We pin it to the legs with thin nails. One is enough for a small table nail in the middle and one nail for each leg.

Step 4 Turn the table over and nail the support for wheels. We also use glue and 5 nails.

Step 5 Carefully cover the nail heads putty.

Step 6 Processing the coffee table impregnation for a tree. We cover with varnish or paint.

Step 7 When is the last layer varnish or the paint is completely dry, you can screw the wheels.

The coffee table can be left in this state, or you can additionally decorate.

Important! Before you start assembling the table, you should paste over the ends of all parts made of chipboard, chipboard, MDF with a melamine edge.

Coffee table-transformer

This table will fit perfectly into the design of any room and will save a lot of space, and if necessary, it can easily turn from a coffee table into dining. The disadvantage of the transformer is difficult assembly. Consider manufacturing such a table.

First you need to decide on mechanism upon which all will be built. assembly. Mechanisms of domestic production cheaper, foreign ones are more expensive.

The design of the transformer comes with backlash and with springs.

Stages of work

Step 1. Acquisition of a transformer mechanism.

Important! Mechanisms for the transformer are produced different types and dimensions, so when choosing, you should consider the dimensions of your future table.

Step 2 Using the simulation program, we create layout table that is right for you. Suitable for this programs PRO100 or Google's Sketch Up: Lightweight, with intuitive controls, so it's easy to figure them out. Creating a layout will take 2-3 hours.

Step 3 cutting details You can also do it with the program. She is calculates all the necessary materials, which greatly simplifies our work. Having received everything sizes, sawing the details.

Step 4 Table assembly. frame our table will be assembled using confirmations(screeds for connecting parts made of wood materials). For this you need to do hole special drill. Marking is more convenient to do with a pencil or using ordinary stickers.

Step 5 Further, in accordance with the transformer mechanism attached instruction attach it to our frame. Before that, you need to insert springs.
We fasten with a simple through way because of heavy weight mechanism.

Drilling holes for the bolts and with a special drill we drill places for the heads of the bolts.

We strengthen transformer with bolts.

Step 6 Fasten in a similar way mechanism on the other side.

Step 7 Collecting legs. The weight of our table is approx. 50 kg therefore, it is necessary to fasten the legs of the table together with ordinary furniture screeds.

Step 8 We will screw our legs to the frame of the table. We make markings and drill holes.

Step 9 We fasten all the legs to the frame. legs hid all working moments of the table.

Step 10 Manufacturing countertops. The tabletop is the most main part of the table. Choosing durable hinges for table top. The hinge holes are small. Screw in the hinges.

As a result, after screwing all the countertops to the mechanism, we get such a transforming coffee table:

Product finishing

Decorate coffee table can be completely different ways. To give the product charm, you can decorate it using the technique decoupage, decorate with shells and others unusual items.

Ideas for decoration:

• thick rope- a rope along the edge as a edging;
• Mosaic from various glass objects;
• painting on wood;
• Pasting with wooden pads;
• Craquelure(artificial aging of the surface of the table);
• Pasting with decorative mirrors;
• Veneering(pasting with decorative film).

For how to make a round solid wood coffee table, see video:

In the era of electronic media, few bother to read printed publications. Despite this, coffee tables still occupy a place of honor in every home.

In addition to their direct purpose, they can be used for other useful things: serving a light breakfast or dinner, minor repairs and home art.

Simplicity of construction, a variety of shapes and designs, a minimum of tools - all these advantages of coffee tables attract the attention of home craftsmen. In our article, we will make a detailed review of popular homemade products and give practical advice for their manufacture.

Design options for coffee tables

The easiest way to make a coffee table with your own hands, using shields from edged boards, veneered chipboard or MDF.

In order to hide the connection points of the plates, the classic method is used - assembly on round wooden spikes (dowels). All that is required from the home master in this case is to accurately mark the installation locations of the spikes on the ends of the sidewalls and drill the mounting holes for them in the bottom and top covers.

The simplest coffee table made of MDF board

To increase the rigidity of the structure between its side walls, you need to install a vertical cross member. A small niche for storing magazines and other little things will not be superfluous here. It can be made from a plate left after cutting the covers and sidewalls.

Mobility is a useful option of the table. It is implemented by installing furniture wheels on the bottom. Compact transport wheels can be hidden, or you can buy larger ones and deliberately highlight them. So we get an original table on wheels from polished bars supporting a massive wooden tabletop.

For those to whom mobility does not play a big role, and who want to see a solid rustic-style table in their home, we can offer an option from powerful boards. Such a table will undoubtedly become one of the main decorations in the living room of any country house.

Reasonable laziness, combined with a thirst for creativity, often leads to interesting discoveries. One of them is a table made from an old tire.

It's very easy to assemble:

• Two circles with a diameter of 3-4 cm less than the outer size of the tire are cut out in the chipboard plate.
• Four metal legs are screwed to the first circle.
• The bottom and the cover are fixed with self-tapping screws to the sides of the wheel.
• The jute rope is used to decorate the sidewalls and the lid.

Homemade design from an old tire looks great

So it turns out an unusual coffee table, which, if necessary, can be used as a banquette.

The idea of ​​using "random" items to create home furnishings proved to be extremely productive. She gave life to numerous homemade products from boxes and pallets. A little imagination and a minimum of expenses are required in order to assemble a coffee table made of wood based on four standard drawers.

The assembly algorithm looks like this: the boxes are placed on edge, placing them in a circle one after the other. Having connected the structure with the help of self-tapping screws, a shelf is made in its center. Here you can put a flower vase or pour decor from river pebbles or shells. The woodworking is completed with sandpaper, stain and varnish.

Natural wood does not need sophisticated decor. Using it for interior decoration, complement the decor with a simple table. To assemble it, you will need several planed bars and slats of a picket fence.

The base frame will look reliable and massive when using a contrast color combination with tabletop. To do this, the bars need to be tinted with a dark stain, leaving the cover in the natural color of the pine sawlog.

Wood in furniture goes well with metal. You can verify this by making a loft-style coffee table on metal legs. Its cover is assembled from three pieces of tongue-and-groove board "forty" and framed with a cornice plank.

For the manufacture of legs you will need welding machine, a piece of steel plate 1.5-2.0 mm thick and several scraps of smooth reinforcing steel with a diameter of 10-14 mm.

Having bent four rods according to the template, square pieces of plates (or thick carpentry corners as in the photo) are welded to them and alternately attached to a tabletop assembled from a grooved board. For final finishing, you need to grind, toned and varnish the lid, sides and paint the legs.

Instead of a bar for making the base, you can use profile pipe rectangular section. Having welded two rectangles from it, cleaned the seams and covered the metal with silver paint, we will get reliable supports for the countertop, assembled from thick oak boards.

To increase stability, the metal sidewalls under the cover are connected with a piece of a profile pipe.

Coffee tables with sawn wood tops look very impressive. Finding this basic element is easy. At any sawmill you will be offered a "semi-finished product" right size. An electric planer and a belt grinder will help you bring it to condition.

The legs of the table can be made from thick bars or a rebar can be used for them. The contrast between the massive top and the light metal base gives the structure a touch of exclusive design.

Another interesting option combination of materials - wood and glass. The tabletop can be oval or round, resting on a cruciform base of two bar frames.

Movable coffee table made from wooden pallet and covered with square glass, looks stylish and modern.

The glass gives a rich look to the entire structure and closes the gaps between the pallet slats through which small objects can fall onto the floor.

Those who prioritize functionality will surely like the transforming coffee table. Through simple manipulations, it radically changes not only its height, but also its appearance.

In the assembled state, it is an ordinary stand for magazines and newspapers. By lifting the two sides with legs, we increase the height of the table and expand the surface of the tabletop to a “dinner format”.

The basis of another transforming system is two metal frame-pedestals. Each of them is hinged to the table top. In the assembled position, they lie horizontally, and when the lids are lifted, they turn on hinges and stand upright.

The height of the unfolded structure is 73 cm. This is quite enough to use the transformer as a computer desk.

Its cover consists of two plates that can be shifted horizontally. In this case, one plate rotates on a hinge around its axis. If necessary, such a transformer can be turned into a dinner table for 4 persons.

Coffee table transformer "three in one"

Someone creates folding adaptive systems, and someone successfully experiments with ordinary plywood scraps. The result of the search for new forms was such an unusual coffee table.

We can only be surprised at the scrupulous accuracy of the calculation and its talented embodiment in a visible image.

Theoretically, everything looks simple: the base is sequentially glued together from three dozen plywood frames. Each of them has a certain angle of inclination of the legs.

In practice, to calculate all the elements of a plywood stand, a three-dimensional modeling program is needed.

The plywood “pie” assembled together attracts the eye with an unusual futuristic shape. A glass lid completes this piece of innovative carpentry technology.

“We would like something simpler, but also beautiful,” he will say House master. Please, there is a table no less elegant, but more affordable to manufacture. It consists of three packs of thin planed boards.

Numerous slots in the type-setting table top can be covered with a glass cover.

A few words need to be said about the connection of glass with wood. The best solution is to use a transparent "optical" glue. It is quite difficult to drill thick glass at home without causing irreparable damage to it. So give up the idea of ​​mechanical fixation and let modern chemistry do its best.

Self-manufacturing

Speaking about the material for the countertop, we completely forgot about the wooden lining. This is an excellent material at hand, equally suitable for creating a lid, sides and legs.

Tabletop made of eurolining - beautiful and reliable

The shape of the tabletop from the lining can be any. The lid, assembled from wooden planks, is cut with an electric jigsaw along a given contour.

To make a coffee table from a lining, we need several tools:

• screwdriver;
• jigsaw;
• belt grinder;
• hacksaw;
• roulette.

The dimensions of the finished product and the design of the docking units should be thought out in advance and entered into the draft drawing.

The finishing of the table is carried out in two stages. Before assembly, sand the surface of the lid, bottom and legs with sandpaper. After completion of the work, the wood is covered with a tinting stain and a colorless varnish.

It is even easier to make a coffee table made of chipboard. This material performs two functions at once: it forms a continuous surface and carries the load. We recommend using veneered board, because paint and varnish cannot hide the texture of wood chips on bare chipboard.

After completing the assembly, you need to close all the edges (tabletops, bottom and legs) with plastic furniture tape, warming it up with a building hair dryer before gluing.

Purchasing furniture is a rather costly procedure, which is not always affordable. This is especially true for items of furniture that are not essential. However, there is a way out - to create an accessory with your own hands. This requires minimal experience with tools, creativity, patience and imagination. In the article we will tell you how to make a coffee table on wheels with your own hands from simple improvised materials, and show photos of successful examples of finished products. The latter will be a good decoration for any bedroom, living room or children's room. Very often, such furniture is placed in cottages on summer terraces, where it emphasizes the existing style and delicate taste of the owners, and also creates the desired atmosphere of comfort.

DIY coffee table

There are many ways to make such an accessory. To make it work, all you need is minimal skills in carpentry and a limited amount of materials. In the process, the master will not need any drawings or any diagrams. All that is needed is a small piece of hardboard and a few legs (depending on the design, 3-4 pieces), which can be purchased at any furniture or hardware store.

Take a sheet of paper in a one-to-one size and use a building centimeter to find the center. To do this, draw two straight lines and mark the point of their intersection. Drive a nail into the center to which the thread is attached. A pencil is fixed on the opposite side of the thread (it should look like a large compass). The handle determines the size and shape of the rounded tabletop. Further, everything is even simpler - cut out the part, process the edge, apply paint and varnish. At the final stage, mount the legs.

Wooden table in country style

If you prefer simplicity and discreetness, then rustic furniture is exactly what you need. But this is purely a matter of taste and everything can be adjusted. A simple rectangular shape, the natural texture of wood will be a great addition to country-style interior design.

Schemes how to build a table for tea drinking

Below are popular assembly drawings wooden structures countertops. You can put them into practice. All instructions are visually understandable and shown in the form of step-by-step pictures. The main rule: measure several times and only then cut. To avoid cracking the wood, make preliminary holes with a drill at the attachment points.

Super simple

The project is suitable even for people who have never been connected with carpentry in any way. You just need to cut a tabletop of the required size from a piece of plywood and 4 legs from rectangular or square bars. Make decorative bevels at the end of each leg. For this, a wood saw is used. Then combine all the details into one composition. For a clearer understanding, it is advisable to number all the elements with a simple pencil.

Square

It is a solid construction that will appeal to lovers of the classics. Boards for organizing countertops will be expensive, so when limited budget take the glued plywood. Legs can be selected or ordered separately. Even with purchased parts, this option will cost much less than a ready-made purchased model.

Tall rustic

An original piece that may not be to everyone's taste. This design looks good in modern interior design, against the backdrop of expensive furniture. The step-by-step photo instructions show that the assembly is simple and is performed like a stool, however, with some nuances. To give the table a noble look, decorative cross sidewalls are used.

Carved

The furniture, which looks like a museum piece, is handmade at home. The pictures below show all the stages of making this masterpiece. The master gave this product a figured relief with the help of an ordinary knife. A little imagination, talent, perseverance and patience, and you can decorate your home with a luxurious thing.

on goats

Usually, in carpentry, this design of the legs is not used. However, no one forbids its use. The table can become a highlight of the interior of any living room, give the room a Mediterranean gloss and color.

Rustic

A fairly popular model, which looks very similar to the previous version. Here, instead of goats, classic-looking legs are used. The photo selection clearly shows all the manufacturing steps, which, if desired, can be repeated by yourself.

Classic with drawers

An interesting multifunctional solution for the living room or bedroom, which can be done with your own hands. To give the design a stylish antique look, you need to carefully work with decorative coating. You can use various stains and ship varnish. During the manufacturing process, many have difficulties with drawers. There are several recommendations in this regard:

• . Make sure that right angles are observed everywhere, there is no deformation of the wood.
• . Make the first box right away, try it on, if everything is fine, then create the second one according to its size.
• . Always compare the details with the drawing and know that nothing is perfect. A slight curvature is perfectly acceptable.

With metal legs

Here, the main material is an array of birch, walnut bars and connecting elements. When everything is in stock, you can get to work:

• . Break the boards into strips of the same size.
• . Lay them tightly, cutting edges to one side.
• . Apply a layer of glue carefully (make sure all edges are well sealed).
• . Fix all elements with clamps, wipe off excess adhesive solution.
• . After drying, with crosscut saw trim the edges.
• . Cut a 20 mm recess in the boards, so that 1 cm of stock remains from the top and bottom.
• . Expand the foam into equal strips, 30 cm wide and 20 cm long.
• . Using a table saw on the bottom edges, make a smooth bevel, at an angle of 45 degrees.
• . Process all the details of the structure with a grinder.

At the last stage, screw the legs.

With shelves

A beautiful product that is easy to assemble and affordable materials. A convenient shelf gives the accessory solidity, and thin stiletto legs - lightness and sophistication. If a person has ever worked with a drill, then creating such a design for him will be a trifle. The pictures show what is done and how.

Large coffee table for the living room

Ideal if you need roomy and at the same time not bulky furniture. It will be a great addition to your living room or bedroom decor.

Rectangular

Making furniture with your own hands is an exciting activity, and most importantly, an inexpensive way to furnish a house. When deciding on a model, it is necessary to take into account the location and functional load on the interior item. This option will fit into almost any room.

With round top

The accessory can be assembled from parts from old and antique furniture. The round shape looks noble and is very relevant in those rooms where there are small children - there are no corners and the child will not be able to get injured about such a product. For countertops, it is better to purchase a quality plywood sheet. The final decor design is individual, depending on the materials used and the taste of the master.

Folding

Tables belonging to the category of coffee tables often play a decorative role in rooms - they serve as a stand for flowers, consoles, presses, and are less often used for morning and evening tea parties. But for work, for example, behind a laptop, such accessories are not suitable or require improvement. A folding tabletop that rises to a certain height will be ideal. A simple mechanism from wooden blocks and a regular box as a stand will make your table multifunctional. Also, under the cover of such a product, you can store a lot of useful things.

Rising top

Here is an excellent modernized model of a homemade table with a height-adjustable table top. The mechanism makes it possible to raise the work surface to a level convenient for the computer. It's also a good spot for a quick bite to eat in front of the TV. However, to mount such a mechanism, you need patience, a little ingenuity and welding.

Pallet coffee tables

A separate group of furniture accessories made from recycled building materials. Differs in a practicality and cheapness.

DIY pallet table

One of the most economical options for a coffee table that can be made from improvised means. You will need a sheet of medium thickness plywood, one pallet as even and free of defects as possible and an iron welded metal frame. If there are difficulties with the last detail, it does not matter - it can be made of wood.

Do-it-yourself metal legs for a coffee table - drawings and dimensions

An original product based on building pallets will fit perfectly into a simple rustic interior in country, Provence or eco style. In addition, the project will save a lot of money and show imagination. The model will be exclusive and in one copy. It can be placed near the sofa and store remotes and newspapers in it. For the manufacture will need a pallet. The latter may differ in the size and pitch of the boards nailed on top. To create a flat surface, the pallets are disassembled and fastened closely. Then everything is sanded and covered with stain and varnish.

Original DIY coffee table

The table can be made mobile by organizing the wheelbase. Everything is very simple here, even step-by-step instructions are not required. Two pallets are taken and connected by the inside. In this case, the lower one will have to be disassembled in order to attach the boards closely and screw the wheels to it. You can put glass or a sheet of plywood on the top pallet. The entire structure must be treated with stain or decorative paint and varnish.

Examples in the photo

Below are the most popular and sought-after models of homemade coffee tables.

From wooden boxes

The hard part of the job is finding the materials. But as soon as you find the boxes, they need to be processed: sanded, fastened with a sheet of plywood, varnished or painted. You can turn the wheels on if you like.

From a car tire

When we talk about improvised materials, it is impossible not to mention ordinary tires. A little imagination, patience, skills in working with the tool and you will get a unique thing.

Hi-tech glass accessory

A small simple coffee table with your own hands can be made of glass. It's not an easy task, but it's doable. The main thing is to choose the right glass material - triplex with a sheet thickness of 10-12 mm is best suited. Further, everything is according to the scheme: we make a drawing, we create a pattern according to it, we cut out the countertop to size. We process, grind the edges and install the finished canvas on a pre-fabricated support structure.

Glass coffee tables

Here are many product options that fit well into modern design interior. There are both complex designs, and those that you can do with your own hands.

As shown in numerous photos, exclusive do-it-yourself coffee table ideas look especially good.

Unusual decision

A vivid imagination and minimal experience with tools is all that is needed to implement such a project. Extravagance and originality cannot be taken away from him.

From a wooden barrel

Not a bad idea to implement. On the technical side, creating such a product is not easy, but all the efforts made will pay off with interest. An accessory with an opening table top looks especially elegant and practical.

How to make a coffee table-clock with your own hands from improvised materials - a photo of step-by-step work

Very interesting idea to add a clock mechanism.

DIY bookcase table

A good option for mobile furniture on wheels. To make such a masterpiece, you need a minimum set of materials - plexiglass, wooden bars, plywood and four stainless steel tubes. The assembly is not difficult, and the result will please more than one generation.

From round

Such a product from a saw cut is quite easy to make. However, in this case, simple does not mean fast. If the material is freshly sawn wood, then it must be allowed to dry. Next, the surface should be carefully treated and varnished.

From birch logs

Birch is a wonderful material that fits into many interior styles. It has a pleasant color, it radiates lightness and warmth.

from willow branches

A simple and at the same time original design is a dream for connoisseurs of eco-style. This is a full-fledged furniture created on the basis of branches. Material can be found on almost every street. A room furnished with such attributes looks like something exotic.

Modern

High-tech products are gaining immense popularity. You can create such an interior item yourself. This will require non-standard fantasy, fiberglass, epoxy and dyes. The pictures show step by step assembly.

From glass bottles

A very unusual approach, below are the drawings with the dimensions of such products.

Homemade giraffe table

With help electric jigsaw and a small sheet of MDF, you can create an original coffee table in the form of a famous African animal.

In the shape of a tetraerd

A conceptual model in a complex geometric image is the piece of furniture that will perfectly fit into any office space. Combine individual elements and you will get a unique item that will become the highlight of the design.

From lids

In pursuit of extraordinary ideas, master dreamers create truly unique accessories. Check out a tabletop made from ordinary bottle caps.

On gas keys

Corner table in the hallway

If a corner in your living room is empty, then there is an opportunity to fill it with original furniture. Outwardly, it resembles a bookcase, which contains several baskets for storing things.

Photo of original products

A selection of photographs of one-of-a-kind tables will allow you to draw useful ideas.

Do-it-yourself restoration

In the event that your favorite accessory has lost its former attractiveness, you do not need to immediately send it to a landfill. There are many ways to breathe into it. new life- modeling, painting, patination, toning and other methods.

Coffee table from a Singer sewing machine

If you are the owner of a frame from an antique mechanism, then you can convert it into an expensive piece of furniture.

Schemes and drawings - photo

Below is a schematic representation of the most popular models of coffee and coffee tables.

Tables for magazines - photo

A photo selection of the most original products that everyone can do.

Even a novice master can make a table from improvised materials. But before assembling a coffee table with your own hands, it is better to view the drawings and diagrams in advance. This will allow you to decide on the shape of future furniture and cut off too complex options.

Do-it-yourself drawings and diagrams of coffee tables

It is comfortable, lightweight and versatile. For the rigidity of the frame, the underframe is assembled from legs and a drawer - a rectangle connecting the legs and supporting the tabletop. Otherwise, the legs will move apart and the table will lose its stability.

At the same time, the complexity of the assembly does not increase much, but now you can store books, notebooks or other trinkets in the coffee table.

A feature of this design is the absence of legs - they are replaced by four sidewalls, to which a ready-made folding mechanism is attached from the inside. To it, on a short pair of supports, a wide board is fixed - the underframe, and a double tabletop is attached to the high supports, which, in the unfolded version, rests on the underframe.

PVC pipe magazine table

The simplest and most economical, but very original version coffee table - make it out of plastic pipes. The shape and height depend only on the wild imagination. It can be a small round table that functions as a bedside table or a full-fledged coffee table with a glass top.

To create it you will need:

• pipes of two diameters - thicker for the legs and narrower for the underframe, for example, 16 and 9 mm;
• glue gun or a tube of transparent superglue;
• medium grit sandpaper;
• hacksaw for cutting plastic pipes (can be replaced with a saw for wood);
• acrylic paint to hide the printed markings on the pipes.

The process itself is simple to disgrace:

1. Cylinders of the selected length are cut. 4 legs are made from a thick pipe - their length will be equal to the height of the future table (40-50 cm). 30 short cylinders are cut from a narrow pipe, on average 10-15 cm (depending on the shape of the table, the number can be changed).
2. You need to start assembling the base from the center - so there will definitely not be large gaps between the cylinders. Glue is applied to the entire surface of the adjacent pipes. A little trick - to accurately glue the cylinders, liquid superglue is poured from the end of the pipes so that it stacks down the entire length of the joint. With a glue gun, the joints are simply processed from the outside - after painting they will become invisible.
3. When the desired shape is reached, the legs are glued - you need to make sure that the diagonal distance between them is equal. Otherwise, the table will fall on one side.
4. The final step is painting. The easiest way to do this is with an aerosol method, although you can also use a simple paint brush.

When laying a glass top on your table, you should choose tempered glass with a thickness of 10 mm. To prevent the removable table top from sliding on the base, use silicone shock absorbers for furniture.

If a non-removable countertop is planned, it is fixed with transparent silicone glue.

Assembling a wooden coffee table with your own hands

For admirers of the classic style, there is nothing better than a wooden table. For him, you need to stock up:

• planed bar 40x40 mm - for legs;
• planed board 50x20 mm - for the side;
• a finished worktop made of furniture board 800x400 mm (but MDF or plywood is also suitable);
• putty for wood - overwrite holes from self-tapping screws;
• sandpaper or a grinding nozzle on a drill - process wood;
• varnish or paint - for finishing the table.

Of the tools you will need a screwdriver (or screwdriver), a saw for wood and a drill. After cutting the bar into legs, and the boards into the drawer side, the assembly of the table itself begins:

1. The underframe is assembled first. For convenience and ease of assembly, everything is done upside down. The sidewalls to the legs are attached obliquely with self-tapping screws through a pre- drilled holes. But you can also use metal corners if aesthetics are not so important.

Wooden tables are not only made from planed wood. With minimal woodworking skills, you can create original furniture even from firewood. For example, picking up a wooden block of suitable height and a pair of Y-shaped thick branches, working a little with a grinding nozzle and varnishing everything, you get an excellent massive coffee table for a summer residence.

And if after the construction of the house there are several euro pallets left, there is no need to rush to dispose of them. It's almost a finished table!

It is enough to grind and stain the surface, put them one on top of the other and securely connect them together. And to make the table mobile, 4 wheels are screwed from below, 2 of which are with brakes.

Decorating a coffee table with epoxy resin

If there is a sawmill nearby and there you can get a sawn board with a lot of defects for nothing - just great! It is from such materials that the most beautiful tables decorated with epoxy resin are obtained.

The process is time consuming but not overly complicated:

1. The cut board is glued with wood glue into the countertop. Flat boards must be placed under the clamps - for uniform fixation.



2. After the glue has completely dried, the tabletop is polished, all cracks and holes from knots are cleaned. Before applying epoxy, the surface must be cleaned of dust and small chips.



3. To make the table glow spectacularly, use luminescent paint in powder. About 100 g of paint is needed for 2 liters of the finished resin solution. Resin and hardener are mixed 1:1, the dose should be measured accurately and so that the hand does not flinch. Too much hardener will cause the resin to crack, while a lack of hardener will delay the curing period.

Such a countertop is suitable for a coffee table in the living room of a cottage, and in the bedroom of a city apartment.

If there are several meters of wooden bars left at home, you can even make a table out of them! The video shows in detail and clearly how to make unusual designer furniture from building debris: