Making a large dining table. How to make a dining table: ideas, materials, step-by-step instructions, photos and videos At home, a table made of wood

Wooden furniture has always given the tenants of any home coziness and comfort. Today, tables are available for almost every taste and from any material, but, oddly enough, wooden furniture is always in greater demand.

Manufacturing technology

The ability to make a wooden table with your own hands in these conditions is a practical talent that not only provides good cost savings, but also allows you to create original themed furniture items for the home.

In order to understand how to make a table out of wood, you first need to decide on the purpose for which it is created. If this is an ordinary dining piece of furniture for the kitchen, then it needs to be made practical, while adjusting to the style and design of the kitchen interior. On the other hand, it can be a table for a country holiday, which can have enough original look. Its main characteristic will not be strength, namely colorful appearance, atmospheric.

To make the simplest wooden table with your own hands, the drawings of which can be found almost everywhere on the Internet, it will take a few minutes of searching and comparing, after which you can already look for the necessary material and get to work.

A table made by one's own hands may not be inferior to the factory one either in beauty or in quality.

A wooden table can be made using different materials. It can be old pallets or edged boards and beams, solid wood or chipboard, as well as other wood materials. Depending on the complexity of the design, you will need different tools that almost every beginner or professional master woodworker or builder.

It should be noted that the wooden table with its with my own hands is not only a convenient piece of furniture, it is also a reason for pride. Every time when guests come to the house of a craftsman who made a dining table with his own hands, they note for themselves the talent and extraordinary taste of the owner.

Selection of tools

Before you start working on a new table, you need to prepare a tool. Depending on the complexity of the work and the purpose of the finished product, you will have to look for tools of varying complexity.

In addition, it is important to have a separate workshop or utility room in which it will be possible to process wood. Firstly, this is necessary in order to avoid harm to the health of others, since additional protective equipment may be required when working on the table.

For example, harmful fumes are often emitted during the staining of wood. This room should be well ventilated, it is best to use ventilated rooms. A garage is also ideal for this, but the presence of woodworking waste (sawdust and others) can harm the car that is stored in it. Therefore, you need to choose the room wisely.

What serious and professional tools may be required:

• A rotary miter box, thanks to which it will be possible to make several saw cuts at the corners of the table elements. Such a tool is best to have in your own possession, and not to rent, because it is universal, it helps in different jobs.
• Electric jigsaw, which is needed for sawing boards and wood materials in a vertical plane.
• A grinder designed to obtain perfect and even wooden surfaces. You can also use ordinary sandpaper, but this will prolong the process for quite a long time.
• A milling cutter may be needed in order to make tongues and grooves.
• Ordinary hammers and nails, corners and self-tapping screws, a drill, and other tools will also come in handy.

In some cases, if home production wooden furniture happens quite often, you can get a universal woodworking machine. It is focused on the household electrical network and has the functions of a circular, planer, as well as lathe which will help increase the efficiency of the machine.

materials

In order to make a table, you need to use fairly solid materials. The softest breeds, such as poplar and others, are not suitable for this. Soft woods such as pine and spruce are easy to work with and are often used as temporary tables.

To make a table any will do material - from the remains of boards and plywood, to wooden pallets.

In order to create a more durable and reliable for long-term use of a home or garden table with your own hands, it is better to use hardwoods such as oak, beech, walnut and so on.

The hardest woods will take long and hard work, but such tables will eventually last for many years. The disadvantage of the hardest rocks, in addition to the complexity of processing, is also the weight finished furniture- they are quite heavy, although a dry walnut, for example, is quite optimal in terms of weight, strength and complexity of processing.

It is best to look for materials that are available near where the table is made and used. Then they are likely to be cheaper. Often walnut wood is used for the manufacture of tables because it is not only hard and soft, but also lends itself well to openwork carving. Thus, walnut tables are not only durable, but also turn out to be quite beautiful, if a point regarding its further decoration is foreseen in the processing plan.

The texture of the wood and even the presence of knots are also important in decorating the table. In the case where soft woods are used, such as pine, for example, the countertop is usually made from boards with knots. The main requirement for them is that they do not fall out, are not black or brown, that is, they are not rotten. Thanks to the knots, the wooden table for giving has a high degree authentic aesthetics, if you evaluate its appearance.

All these types of wood are best used in the form edged boards. If this is not possible, it is better to use a well-dried tree that can be processed on a universal household machine described above.

Material pretreatment

In order for a wooden table to last as long as possible, the wood used for its manufacture must be impregnated with protective compounds. These compounds include antiseptics and substances that protect against moisture. One of the best free tools that protect wood from rotting is considered to be oil treatment. Engine oil, however, is not recommended for use on surfaces on which food will be located.

The surface of the table can be treated in various ways: polished, stained, varnished or simply painted.

Therefore, for table parts (for all or separately for the table top), you can use a water-polymer emulsion that will protect the wood from moisture almost forever. The use of various furniture nitrocellulose varnishes, which used to be popular, is now quite rare. Water-based acrylic varnishes show themselves better in this regard.

Wooden elements of wood can be tinted before a finished table is made from them. It is also susceptible to staining. In order to color the nodes of the table, you can use a mixture of varnish and paint. But with the mixture you have to be careful.

In order to determine if the color is suitable after mixing, you need to take a wooden test piece and paint it. After complete drying, you can determine whether the color is suitable or not. It is worth remembering that nitrocellulose varnishes are mixed with oil paints, like acrylic, but the latter, unlike the former, have no mixing restrictions.

Drawing and Assembly

To make a table with your own hands, you definitely need its scheme, which you can do yourself, take from open sources or hire a specialist to draw it. The easiest option is the first one. The drawing of the table should be as clear and accurate as possible. Separately, it is necessary to evaluate how the tabletop is connected from separate boards, as well as what sizes the legs for the table have, how they are connected to each other and the tabletop.

Scheme No. 1 of the table with your own hands.

A large do-it-yourself wooden table (s), the drawings and diagrams of which are most common, requires a certain durable material with good bearing capacity. Big table, however, it will take a long time to do, and it will also turn out to be quite heavy, but roomy. You can appreciate the large wooden tables with your own hands in the photo below.

A small table can be made not from solid wood or boards, but, for example, using old pallets, choosing the best boards from them without traces of decay, cutting them if necessary and making a tabletop out of them with glue or transverse fasteners. For the countertop, you can use tongue-and-groove boards that will be glued together or fastened with transverse joints.

Diagram of a table with cross legs.

The legs are most often made cross. To do this, you can use both boards and bars, which gives the table additional stability. Straight legs should be connected using detachable drawers, which come in several different types and designs. At the same time, a strapping is created under the table top: the heads of the legs are connected to each other by longitudinal and transverse strips with inserts that act as the main support for the table surface.

Scheme of a country table.

An ordinary country table made by oneself, or even several tables, can also be equipped with chairs, for which the same materials and a similar design style are taken.

Using the simplest tools, it is easy to make a table for a cozy tea party in the summer in the country, or a large desktop for your own office. It all depends on the desire and the creative component. Whatever the table, the main thing to remember is that its purpose is not only to put things on top or place appliances. He still has to make the life of the owner comfortable and cozy. Therefore, when assembling such a table, you should first of all think about all the additional features that such a simple piece of furniture can give.

Video: do-it-yourself wooden table

An integral attribute of any home is a table. Despite the fact that the variety of forms and materials of execution of this piece of furniture can amaze even the most demanding and sophisticated buyers, many amateur furniture makers try to make a table with their own hands. There is nothing complicated in this, because the design of the table is not much more complicated than an ordinary stool. Armed with a saw, drill, hammer and other tools, you will be able to assemble such a product in just half a day, and it will look no worse than the purchased one. One of the main advantages of hand-made furniture manufacturing is the possibility of creative self-expression. In addition, a do-it-yourself table can become a central element of any interior.

It's no secret that the main function of the table is to organize a place for dining and receiving guests. In addition, it often serves as a place for family pastime, during which you can enjoy various entertainments: playing cards, monopoly, lotto, dominoes, etc. In addition to significant savings and demonstrating your carpentry skills to others, making a table with your own hands provides a person with an excellent opportunity create a unique little thing that is ideal in all respects: shape, size, material and reliability. Following the instructions and recommendations of professionals, you will be convinced of own experience that this piece of furniture is quite capable of being made at home.

Today, various building materials are used for the production of tables: metal, glass, plastic, stone, but furniture is often made from such high-quality material as wood. To create a wooden table with your own hands, you can use soft (spruce, pine, cedar, fir), hard (birch, walnut, oak, maple, ash) or very hard (dogwood, yew) wood species that have good resistance to decay and mechanical influences.

Walnut has the most valuable qualities for furniture - it combines high hardness and excellent viscosity. If you are new to carpentry, it is recommended to give preference to furniture made of pine, birch and oak. Deciding to make a pine original table with your own hands, you can use cheap knotted boards, but they should not have falling knots, cracks, stains and traces of rot.

Before proceeding with the analysis of specific points and recommendations that will help you make a table with your own hands, it is important to decide on the design of the desired product. Due to the perfect combination of naturalness and environmental friendliness of wood with a country concept, a homemade wooden table will become great option garden furniture. A small do-it-yourself table made of wood, as if deliberately aged, will also fit well into the design of a city apartment made in Scandinavian or Provence style. It is noteworthy that, in terms of the complexity of the work, this piece of furniture for most craftsmen is almost like a homemade made of wood, since a homemade table is assembled very easily. This fascinating process is reminiscent of assembling a constructor.

The table, as you know, is needed in every home. Currently, there are a very large number of different options in stores:

• dining;
• kitchen;
• garden (for a summer residence or a private house);
• transformer;
• large;
• little;
• round;
• rectangular;
• square and so on.

However, many people want to make this piece of furniture on their own, especially since simple models require minimal tool skills.

Before proceeding directly to work, you should prepare some
tools, and pick up material. Let's take a closer look at these very important points. If you are planning to make a simple wooden table, then in this case it will be quite enough to have an ordinary carpentry set (planer, chisels) and several saws (beam, for veneer harvesting, tenoning, manual) and a hacksaw. More fine work with fanciful forms will require additional tools. This is, in particular, an electric jigsaw, Sander, cutter In order to facilitate the process of corner cutting, you need a miter box.

It is also important to choose the right material. In the absence of serious work experience, it is better to take cheaper wood, since you will need some stock of it “just in case”. For the manufacture of countertops, such characteristics as strength and moisture absorption are of particular importance. The best option here would be larch or pine with a thickness of at least 3 centimeters. However, if funds allow, then the countertop can also be made of oak. For compact tables, wood-based slabs are quite suitable - OSB, chipboard, and so on.

For the manufacture of legs, birch is best suited. The thing is that this wood has very good strength indicators at a relatively low price.
However, it is imperative to take care of moisture resistance - we will talk about this a little lower. The most optimal parameters for the legs are a section of 5 by 5 and a length of about 76 centimeters. Dowels are best made from acacia. When choosing boards, do not forget to carefully examine them. Those with wormholes, loose knots, cracks, or rot should be discarded immediately.

The design will not be strong without reliable fasteners. Therefore, their choice must also be approached with all responsibility. We will immediately warn you - nails in this case are not suitable. Firstly, when using them, it is very difficult to put the leg strictly vertically. Secondly, the nail easily pricks dry wood, and for the manufacture of furniture you need to take just that. Thirdly, such a product will be very difficult to repair, because the dismantling of fasteners is almost always accompanied by damage to adjacent parts.

Therefore, for the manufacture of a wooden table, you need to use dowels planted on glue, or self-tapping screws. If the design requires additional reinforcement, then the best option would be corners, brackets, metal strips. If a collapsible structure is planned, then it is better to connect it with drawers.

It should be noted that the table should be not only reliable, but also practical. Equally important is its appearance. Therefore, these points should also be taken care of. In particular, it is really possible to protect the table from rotting with the help of used engine oil. This tool is not only effective - they can also get hold of it completely free of charge. It is also good to use a natural product - linseed oil. It protects the table well from fungus and mold. These are not all options. Acrylic varnishes or water-polymer emulsion will protect your product well.

To give the table an attractive appearance, you can use paint. Only when buying, specify that you intend to paint the wood. Also a very common option - stains. The choice of these funds today is very wide, so there will be no problems with the acquisition. Tables covered with tinted varnish look very nice. Generally speaking, you can give the table any shade. In this case, you can even conduct several experiments, taking some kind of rejected board.

The next step is to decide on the design of the table. It is simply impossible to describe in detail all the options possible here, so we will focus on the simplest. It's about about an ordinary stationary rectangular table. All parts here must be fixed rigidly - thanks to this, the required strength is achieved. You will need to make 3 main parts - a tabletop, underframe and 4 legs. First, of course, you should decide on the size. If the table is small, then it is quite appropriate to take a solid countertop by cutting it out of the OSB-plate.

The underframe is wooden frame. It is to her that we will attach the legs. The latter are easiest to make from a bar having a square section. right size. That is, you will only need to cut 4 legs of the required length. After that, it remains to connect all the elements of the table to each other. At the final stage, take care of protecting the structure made by your own hands, and also give it the desired color. As you can see, there is really nothing complicated here.

Well, in conclusion, I would like to give a few tips. In particular, if you plan to assemble on self-tapping screws, then you will first need to make holes in the tree with a drill bit of a slightly larger diameter. When using an abrasive, a large one is taken first, and then a small one.

You need to be prepared for the fact that you will need multiple grinding. Much here depends on the type of wood and the quality of drying of the material. Chips and cracks are easily removed with putty. Wood dust after grinding is removed with a vacuum cleaner. After that, it is recommended to wipe the product with a damp cloth. Well, the most important advice is that you need to move on to the manufacture of complex products only after you confidently cope with simple ones.

In the conditions of modern small-sized apartments, it is quite difficult to give free rein to imagination and purchase pieces of furniture that would suit everything. Among other things, it is quite difficult to find such interior elements that would be attractive not only in design, but also in price. These two problems can be solved by self-manufacturing wooden furniture. It could be, for example, a table. You can complete it by preparing everything necessary materials and tools. You can use this piece of furniture both in the kitchen and in the living room.

Preparatory work

In order to make a wooden table with your own hands, you will need to prepare some materials. You will need a furniture shield, the thickness of which is 19 millimeters. This material is highly durable and looks very attractive. Shields on preparatory stage it will be necessary to mark, and then cut blanks out of them. It is important to stock up on the necessary fasteners for assembly. Thus, it will be necessary to prepare 6 boards that will make up the lower support. Their size is 19 x 100 x 965 millimeters. There will be 4 legs, their dimensions are 19 x 215 x 680 mm. The molding of the legs will also come in handy in the same amount, however, the dimensions of these elements should be equal to 1938 x 470 mm. The tabletop supports will be blanks with dimensions of 19 x 125 x 610 mm. A wooden table for a gazebo with your own hands can be made according to the same dimensions. The master must prepare two dowels for legs with dimensions of 10 x 32 mm. Two jumpers with dimensions of 19 x 140 x 1100 mm should also be distinguished.

Additional elements

You will need a steel coupler in the amount of two pieces, its size should be equal to 150 mm. The table top will be limited to the following dimensions - 19 x 1020 x 1900 mm. The worktop plank must be cut in two pieces and have dimensions of 19 x 19 x 1750 mm. Screws, washers, ties, and dowels will be used as fasteners.

Instrument preparation

It will be impossible to make a wooden table with your own hands if you do not stock up electric jigsaw, circular saw, hacksaw, drill with drills, planer, milling machine, file, clamps, brush. To fasten the parts, you will need carpentry glue; you can process the wood with sandpaper. The table will look good if it is treated with polyurethane varnish, which can be glossy or matte.

Manufacturing technology

If you decide to make a wooden table with your own hands, then you need to know that each support structure has 3 blanks glued together. An opening should be formed in the central part. Immediately you need to cut out 6 elements for two supports. Next, the master must make straight cuts using a circular saw for this. The corners must be rounded. In two blanks, it is necessary to cut the central part so that the groove falls on the central part of the support. The width of the groove should be slightly less than the thickness of the spike in the leg. This will prevent loosening of the structure during swelling and drying.

The next step is to glue the supports. After applying glue to the surface of the parts, they must be folded so that the upper edges are flush. Reliability of fastening will provide clamps. After the supports are dried, it is necessary to get rid of excess glue. After the clamps are removed, you need to plan the lower and upper edges.

Work on the legs

When a wooden table is made with your own hands, you need to prepare four legs. After the vertical edges, it is necessary to plan and round them with a milling machine. At the ends of long blanks, it is necessary to mark and then cut the spikes, placing them from above and below. This can be done with a circular saw, which must be equipped with a combination disc. After the moldings are cut out and brought to the required dimensions, all 4 ribs can be rounded. On the reverse surface of the moldings, it is necessary to make grooves for glue.

Work on supports

If you decide to make a wooden table with your own hands, a design photo will help you decide what features this piece of furniture will have.

The next step will be cutting blanks for supports. For gluing, a 10 mm groove should be selected in each blank. It is preferable to perform these manipulations immediately. In order to simplify the task, it is necessary to prepare a cardboard template by marking the location of the grooves on it. Further, pairwise gluing can be carried out so that the cut is located in the central part. Everything must be tightened with clamps. Once the glue has dried, you need to clean the saw cuts with an emery cloth.

Leg mounting

If a wooden table is made with your own hands, the photos must first be reviewed by you. It is important to initially fit all connections without using glue. From the wide edges of the connection should be tight. On the side, it is necessary to provide a gap of 1.5 millimeters to compensate for changes in the size of the wood. When edging, these elements will be decorated.

The walls and spikes must be treated with glue, after which you can proceed to pair the legs with vertical supports. Without waiting for the glue to dry, it is necessary to make holes and strengthen the pairing with dowels. If you decide that you will make a wooden table with your own hands, it is recommended to prepare the drawings at the initial stage. For the legs, moldings of the required length should be cut. They need to be glued and pulled together with clamps. The glue is applied, and then left until dry.

If you decide to make a wooden table with your own hands, the drawings can be borrowed from the article. The jumper should be installed high, so that those sitting at the table do not touch it with their feet. It is necessary to glue using two strips, which are preliminarily edged with a molding.

After the glue dries, you need to remove the clamps, and then chamfer. Holes must be made on the short sides for installing fasteners. The tabletop can be made independently, its dimensions may differ from those presented above. At the ends, you need to select the spikes using a jigsaw.

Next, the saw cuts are cleaned with a file. Along the long edges of the workpiece, it is necessary to install strips that are attracted by clamps and dried. Using an edge cutter, you need to align the edges of the moldings. They should be fixed to the planks, and then dry and clean the joints with a grinder.

When a wooden table is made for a summer cottage with your own hands, the drawings will make it possible to understand how the table top and legs are connected. To do this, use U-shaped brackets. On the long sides of the base, quarters should be chosen to fix the sidewalls. The ends of the last elements must be rounded and cleaned. After that, everything is glued and compressed with clamps, and then left until the moment of drying.

Final works

Before you make a wooden table with your own hands, you need to familiarize yourself with the technology of work. At the next stage, with a deviation from the edges of the base by 100 millimeters, it is necessary to make holes, the diameter of which should be equal to 20 millimeters. A through groove should be placed between them. Holes are required so that the base does not split. If you will be making a wooden table for giving with your own hands, the drawings should help in carrying out the work.

Now the master can assemble the table, for this it is necessary to fix the jumper to the legs. Using a pencil, you need to mark the position of the legs so that they are perpendicular to the ends of the lid. Brackets should be installed according to the markup. In the countertop, you need to make 10 holes for installing screws. Next, you can strengthen the brackets. A washer must be placed under each screw, this will compensate for shrinkage, this is the only way to make a folding wooden table with your own hands.

You can change the technology and dimensions of the table at your own discretion. However, it must be remembered that the design should be as strong and reliable as possible. It is important to protect wooden elements from the negative impact of the external environment, especially for those pieces of furniture that are supposed to be used in the kitchen or outdoors.

This kind of useful furniture, such as do-it-yourself wooden table is not only a way to save money or show off your carpentry skills to others. First of all, such a home or is an opportunity to make a thing that is ideal for the tasks assigned to it, both in size and configuration, in material and strength. And, if everything is done according to the instructions and recommendations of the masters, then making a new table will not be much more difficult than assembling the finished one, brought in a box from the store.

How to make a wooden table with your own hands

Before disassembling specific items and recommendations of what how to make a wooden table with your own hands, it is worth deciding whether you need to get exactly wooden product and what exactly will be its design. Ideally, such a texture is suitable for, because the naturalness and ecological purity of wood is perfectly combined with the country concept.

But even in city apartments, especially in those whose design is decided in Provence, rustic, Scandinavian styles, small wooden tables, as if deliberately aged, fit perfectly. Yes, and a loft or others modern varieties they can’t do without a wooden texture, however, rather, plank pallets can be the main material there. They are more likely to talk about this type of furniture as about, since its assembly resembles the assembly of a designer. If you want this coffee table, then keep in mind that the pallets must first be dried well (so that they do not change their shape, they are not “led” after one season of use), bring all the boards to an absolutely even shape with a power tool and then paint. Therefore, think about whether you can spend the same efforts on making even a small do-it-yourself wooden table, video with a master class on which you will find on the net, but it will be durable furniture, which will certainly not go out of fashion for a long time and will serve its owner faithfully.

Do-it-yourself wooden dacha table

In most cases, we need advice on creating exactly do-it-yourself wood tables. There for this piece of furniture there is a huge number of tasks, we can safely say that there are not enough tables in the country. Therefore, both lunch and kitchen table, and a picnic table, round, for a gazebo or folding, with which you can sit on the terrace or on the river bank while fishing. And for each option there are individual tips for creating.

However, there is also general recommendations that you can keep in mind when creating do-it-yourself wooden table, photo which you see in our today's article. This applies to the selection of wood, for example. It is believed that the countertop, especially the product that stands on the street, should be hardwood such as oak or walnut, but today with the presence a large number quality protective products and varnishes, you can very well use pine boards, which are much cheaper in price and, with proper processing, they will last you a very long time. If you want to practice intricate carving or carving, choose soft woods such as basswood, but be prepared for scratches or dents with too much use.

The second important common point in creation is the choice of a configuration suitable for it. You can pay attention to finished projects do-it-yourself table made of wood, drawings which are, including, in our article. They already have dimensions, but this should be treated only as a recommendation. After all, what are good independent work- you have the right to make your own decision on the size and shape. It is for the number of members of your family that you can choose the width and length of the tabletop, and the shape is selected for the height or parameters of the terrace, gazebo, inside which the furniture will stand. The standards are considered to be a height of 75-85 centimeters and a rectangular tabletop 120x70 centimeters.

Based on all of the above, the first step can be called the creation of a drawing, on which you will not only mark all the necessary dimensions, but also make an approximate cutting of the parts that you will need for assembly. You can use illustrations as an example. do-it-yourself table made of wood, drawings, photos which you see above. The diagrams show the sequence of actions that must be followed in order for the product to turn out to be stable. In general, the stability of the legs and the evenness of the surface of the tabletop are two mandatory conditions similar . For evenness, you must observe the exact dimensions of the length of the legs and cut their lower surfaces well. The finished product can even be checked with a level whether it will stand in the correct plane. But there are different ways to be sustainable. For some, this is achieved using a different number of legs, that is, not the classic four at all corners of the rectangle, three or even one, strictly in the center. If there are four legs, then they are additionally supplied with stiffeners, supports and jumpers between themselves. By the way, it is very convenient to put your feet on such supports during a feast, this can be called another nice bonus.

DIY wooden tables and chairs

Set wooden tables and chairs, handmade made, will be an excellent option for filling the summer terrace, where you can have lunch and dinner in the fresh air. Even if there is a canopy or roof above the headset, anyway, in this case, timely care and wood processing is very important for before starting work. The boards should not have bumps, knots, holes, they should be completely dry so that later you do not get deformation during operation, because there will be plenty of humidity in the surrounding space. It is also a good idea to make the countertop and the top of chairs or benches not solid, but with gaps between the boards, which will allow rainwater to drain from the surface without stagnation.

One version of that, you can see in the photo. To do this, boards are taken, they should not be too thick, since on such surface deformation can be stronger, but not thin, so that sufficiently heavy pots or other utensils can be placed on the surface. If you cannot afford to make the entire product completely with the help of hard, valuable rocks, then you can combine it, making the countertop itself durable and resistant to damage. The model that we offer you is made on four points of support, so it is perfect for a stationary table that is fixed in one place. For fasteners, metal pipes are used, which are deepened into the ground and, if necessary, concreted.

First, the boards are knocked together, and special self-tapping screws are used, since ordinary metal nails can damage the material. The assembly takes place on two boards, which are located below, all the rest must be screwed onto them. After that, the surface must be processed using a manual or electric planer, of course, if you use an electric one, it will save you much more time. In the same way, the boards are cleaned, which will create the frame of the tabletop, as well as the beam for the legs. Final grinding with sandpaper is carried out after the product is assembled. You can cut the edge with a router both on a finished, assembled countertop and on boards, you just need to mark the borders if you want to repeat the rounded shape, as in our example.

In yet another example, step by step manufacturing which you see above, the countertop is literally assembled on the basis of scraps of boards that were previously used in repairs or construction. In this case, it is only very important that their thickness is the same, because they will be assembled by the ends. An interesting visual effect is provided by the assembly technology, because the boards are literally strung on metal pins and additionally glued. Then the legs are nailed to the surface, made at an angle of 45 degrees.

Do-it-yourself wooden gazebo table

If we single out the models that are the most complex and require special attention, then among them wooden gazebo table. DIY it is not so difficult to make it, but it is very important to correctly calculate its dimensions and fit it into the existing gazebo space as efficiently as possible. When we, then, nevertheless, we care more about its functionality than about some decorative properties. In the case of a gazebo, a place that attracts increased attention of guests, you need to take care of the visual decoration of the countertop. Here both carving and interesting design with the help of cuts.

As for the form, you need to be guided by the shape of the building itself, inside which the furniture will stand. That is, in a rounded gazebo, a square or round tabletop will not only look ugly, but also the space will be used extremely irrationally. That is, most often they use a simple rule - in a round gazebo they put a round table, in a hexagonal one - a hexagonal one, in a spacious and wide rectangular one - a rectangular one.

Do-it-yourself round table made of wood

Since the round gazebo is the most popular variety, we can say what exactly do-it-yourself round table made of wood and is the #1 model that home craftsmen want to make. The special difficulty that distinguishes this particular shape is cutting out the shape, you need not to spoil the material and try to make a perfect circle.

For those who doubt their abilities and the evenness of their hands, we can advise a compromise option - buy a round finished tabletop and already make furniture based on it. For a round top, it will be relevant to use a tripod system, which is shown in the photo above. First, a base is created, three boards are interconnected, legs are nailed to them. The last step is to fix the countertop on the screw in the center.