Flowerbeds from beer plastic kegs. How to make a garden fence out of plastic bottles. Beautiful neat flower beds

If you want the cottage to be decorated with a bright strawberry bush at any time of the year, a stork towered, daisies turned white, and a firefly burned in the evening, then find out how all this can be done from plastic bottles.

Broom from plastic bottles

It will certainly come in handy in the household. She can sweep not only garbage from the hut, but also collect fallen leaves, rubbish from garden paths.

To make such a strong whisk, you will need:

• 6 plastic bottles;
• scissors;
• a hammer;
• cutting.

First of all, wash the bottles under warm water, remove the labels from them. Now cut off the bottom of five bottles, cut off the necks from four. Starting from the bottom, cut the canvas of the containers into strips 1.5 cm wide. For the broom to have sufficient rigidity, stop before reaching the shoulders, as shown in the photo.

Do not cut off the neck of the fifth bottle, make a fringe on it in the same way. Now put 4 bottles on top of it. Prepare the sixth differently. Cut it below the shoulders, leaving the neck.

Put this sixth bottle on the blank of five containers. Insert the stem into the neck. Now squeeze the blanks a little so that the broom becomes flatter.

The final touch remains, make a few holes with an awl in the working part of the panicle, put a wire here, fix the product on the handle. Here's how to make a broom out of plastic bottles.

How to make a stork

This is what a wonderful stork can decorate your garden, city yard.

If you still have floorboard trimmings after building a house or repairing, they will come in handy. Here is what you need to prepare in addition to them:

• plastic milk bottles;
• green and red electrical tape;
• self-tapping screws;
• block of wood;
• 2 metal rods;
• glue gun;
• eyes for toys.

Cut off the bottom and neck of the bottles. From the resulting canvas, make four feathers. To do this, first cut the bottle on the side, then divide the resulting canvas into rectangles with scissors. Round the bottom of each and frame the feathers with a fringe by cutting the edges of the blanks.

Draw a stork template on paper or cardboard, attach it to the board, outline it, cut it out with a jigsaw. Draw a wing separately, also cut out 2 such details, screw them to the stork's body with self-tapping screws.

Leave the bird's beak unformed for now, starting from the head, glue the body and wings of the stork with blanks from plastic bottles. Note that the plumage of the bird on the head is different from the plumage on the body. For the head, shorter blanks are made.

To decorate the wings, you need to make not only white, but also black feathers. You will make the last ones by taking a shampoo bottle of that color. The same, but long, you will need when decorating the stork's tail.

Wrap red tape around the bird's beak. Glue the eyes, attach two metal rods in place of the legs. Fix their lower part on the bar.

Here's how to make a stork so as not to spend extra money on buying such a garden figurine.

Decorative flower beds - the first idea

Beautifully decorated flower girls are pleasing to the eye. Plastic bottles will also help in their creation. If you do not have a summer cottage, you can implement the idea below in the summer on adjoining territory in the city, on your balcony and even on the windowsill.

This flower bed-container is also made of plastic containers, but rectangular in shape. Prepare the following for work:

• 3-4 plastic bottles;
• awl;
• scissors;
• glue;
• white paint.

Cut off the necks and sides of two bottles, leaving the "sides". Match 2 containers, glue the place of their connection as shown in the photo.

Similar plastic flower beds may be based on not two, but more bottles. Then the middle elements of the flower garden are cut out without "sides".

Now you need to make holes in the bottom of the blanks with an awl to drain excess water. If such a decorative flower bed will be at home, then you need to put it on a pallet or tray.

A beautiful fence is also cut out of plastic bottles. Its vertical fragments have a width of 4 cm, and the height should be 5-7 cm more than the height of the sides of the containers. The upper part of such a picket fence is pointed, the lower one is rounded.

Now cut the rest of the bottles into long strips. Attach them horizontally to a vertically located picket fence, glue. If the bottles are transparent, first paint them white or any other color, let the paint dry, and then cut out the elements of the fence. After that, glue it to the flower girl.

You can leave the flower bed like this or decorate it with flowers made from plastic bottles. When filling containers at the bottom, first put drainage in the form of small pebbles, then a small layer of coarse sand, and then fill in fertile soil.

The second option of a flower bed made of plastic bottles

This idea will certainly appeal to lovers of classic forms. Cut off the necks of two eggplants, but do not throw them away. The photo shows how they need to be shaped so that these parts turn into the legs of a mobile flower bed.

At the bottles themselves, cut out the sides, but leave along the side near the bottom and near the shoulders. Slide these parts of the two containers one into the other, remembering to secure with glue. Use it to attach the legs.

It remains to cover your creation with paint, let it dry, fill it with a small layer of drainage, light soil and plant your favorite plants.

When purchasing glue, see if it is suitable for plastic. The same applies to paint, because not every one fits well on this material.

Crafts for giving

After winter, there are still few bright colors in the garden. These naughty plastic bottle crafts will help fill this gap. These funny little mice will become both small flower beds and garden decoration.

For this garden craft you will need:

• plastic bottles;
• acrylic paints;
• scissors;
• glue;
• fishing line;
• buttons;
• felt-tip pen.

Lay the plastic bottle horizontally, cut off the side of it, which is now the top of the container, but don't throw it away just yet. Draw 2 ears and a tail on it.

Color the tail and body of a mouse from a plastic bottle in grey colour and the ears are pink. Glue all the details in place, use 2 dark buttons for the eyes. Draw a mouth for the craft, glue pieces of fishing line on the nose that will become the mustache of the toy. After that, it can be used for its intended purpose.

The next flower garden for giving is done in almost the same way. Also cut out the side of the bottle, ears, tail for these funny piglets, then paint them pink. When the paint dries, fill the container with earth and plant flowers.

There are crafts for giving that look good during the day, and even more spectacular - at dusk, due to the fact that a neon lamp is lit inside.

Here are the materials needed for work:

• green plastic bottle;
• black or green wire;
• yellow paper;
• gold decorative wire;
• neon lamp;
• scissors.

Wash the bottle with warm water, remove the label. Now cut 3 strips of wire, twist them on the container as shown in the photo. The bottom of the wire will become the legs of the firefly, and the other parts of the wire will be draped with a rectangle cut out of yellow paper.

Draw wings on cardboard, cut them out and glue them on the back of the insect. Glue 2 beads to the lid, which will become the eyes of the firefly. Twist the golden wire in the form of his antennae. Bend the neon stick so that it lights up, insert it inside the container, secure its upper part inside the neck with adhesive tape.

Here's how to make a firefly out of a plastic bottle. It will look nice next to ornamental plants also made by hand.

Strawberries and flowers from plastic bottles

These beautiful daisies will turn out when using empty containers from under dairy products. Of course, first you need to wash them well and remove the labels. To make one flower, put in front of you:

• 3 white plastic bottles;
• cover;
• scissors;
• wire;
• felt-tip pen.

Cut off the lower parts from the containers; we will not need them when making flowers from plastic bottles.

Leave the neck on one bottle, cut it off from the other two.

Lid orange color perfect for the center of a flower. It will only be necessary to erase the numbers indicating the date of production and the expiration date of the product. This is easy to do with acetone or paint thinner.

Now make 8 petals on each blank. To make them the same, use a stencil or first outline them with a felt-tip pen, and then cut them out. Then it will also need to be erased. Put on the first blank, on which the neck is preserved, the second, then the third. Remove the petals first to make the flower more voluminous. Close the lid.

Using a drill or a hot nail, make 2 holes in the lid, thread through them soft wire, wind it on a solid one, which will become the stem of the plant. That can be wrapped with green electrical tape or painted in that color. It remains to cut and fix the leaves from the green bottle on the trunk, make 2 more daisies, and the hand-made flowers are ready.

Such bright juicy berries will also be a wonderful decoration for a summer cottage at any time of the year.

This strawberry bush is made very simply. The bottom is cut off from the bottle, set aside. The middle part of the container is not useful, it and the neck must be cut off and thrown away. But the remaining fragment from the neck to the bottom of the shoulders, insert into the bottom of the container. 2 more berries are also made, or as many as you wish to create.

Now these blanks need to be painted red, and when this tone dries, make dots of white or dark color.

A sepal is cut out of a green bottle and put on the recesses of the berry. In his and her center with a drill or with a nail and hammer, you need to make a hole, combine them and thread the wire. On the other hand, leaves cut from a green plastic bottle are put on it. Below the wires are connected and the lower edge is stuck into the ground. As a result, what a wonderful craft for the garden you will get!

There are others interesting ideas for giving. From the video you will learn what else you can make flowers from plastic bottles:

This video shows how to make bees from small plastic bottles:

The following master class will teach you how to create country figures of storks from the same material:

Today, almost every house can be found flower beds made of plastic bottles. This trend is due to several reasons. Someone wants to use plastic containers a second time so as not to throw them in the trash. Others just want to cheaply arrange the territory near the house. Since other methods of decorating flower beds, except for plastic bottles, are expensive. For example, the decor of a flower bed made of wooden fences. It will also be very expensive to make crafts from gypsum or other materials. How is it possible in this case to use practically free plastic containers of various shades and shapes? The video below shows how you can make crafts from plastic bottles, and in the photo you can see the finished options.

Fences for flower beds

Forms of fencing for flower beds or flower beds with plastic bottles can be:

• round,
• rectangular,
• square,
• polygonal,
• and any other arbitrary form.

Thanks to the small size of the dishes, you can decorate the garden with the necessary curves and roundings. In order to make a standard flower bed, it is better to use 1.5 and 2 liter bottles. In the photo you can see several options for finished fences for the garden and more.

An important point: if you want to get a relatively durable design, then it is better to use dense plastic.

flowerbed hedgehog

As a border, you can take bottles of different colors, or you can pre-paint them in any color. When decorating a personal plot, you need to take bottles of identical dimensions or colors, and when decorating “mosaic” fences, you can combine dishes of various shapes and colors to get some kind of beautiful picture, for example, as in the photo below. Here it is imperative to adhere to a certain decor scheme so that the fence is neat. Before decorating the border, the containers must be cleaned of labels and washed thoroughly. You can paint the inside of the dishes by pouring acrylic paints into it and shaking it thoroughly. Such containers will retain their own color much longer than those that are painted on the outside.

To date, there are several methods for forming flower beds from plastic bottles:

horizontal curb

Bottles can be laid parallel to the ground in two ways:

1. The first is the easiest method: they make a shallow hole, where they put the bottles into which the soil is poured.
2. The second way is to cut off the necks of the bottles so that there are no narrowings. The bottles must be inserted into each other, and the gap inside the dishes should be covered with soil.

Flowerbed fences

Round-shaped flower beds made of plastic bottles, which are arranged vertically

If you want to visually emphasize the flower bed, then you can surround it with a border on all sides. In this case, plastic bottles serve as the material for creating the fence. You can see the resulting version in the photo. In this option, you must first make a circle on the ground, mark with pegs and pull the ropes. You can also just lay out the bottles near the manhole cover and other containers that are round in shape.

Using the resulting contour, you need to dig it, which is equal to the diameter of the bottles, and a depth of about 18 centimeters. The bottoms of the bottles after digging in should not be higher than 8 centimeters above the ground. We adjust the containers to each other so that there is less space between them. And the service life of the fence will probably increase. To prevent the structure from deforming during winds, it is necessary to weight the containers, we fill them with soil.

Making crafts with plastic bottles

Another way is to decorate the border with bottles that do not have a neck. The video shows everything in detail, and in the photo you can see the result of such painstaking work. The cut line is approximately one third from the top of the bottles. The upper area can be thrown away, it will not be useful for work, but you can make crafts from them yourself and decorate flowerpots with them. The video shows how to make crafts from plastic bottles in the form of butterflies. With a similar creation of fences, we dig a hole, we ram it with the help of bottles. We turn the bottle over and bury it along the contour of the flower garden, and the depth of burying should be about 4 centimeters. Thus, shallower holes can be obtained than in the first method. To prevent plastic containers from looking dusty, they must be properly cared for, for example, when watering plantings, wash off dirt from the fence with a watering can.

flower bed

In this case, a support is useful to create a flower bed fence. As such supports, you can use large tires from cars or trucks, barrels that do not have a base, or pvc slate. It is better to opt for a workpiece that has thin walls in order to reduce the loss of territory. In order to create a flowerpot, you will need cement mortar.

Crafts and their design in various ways

1. First, we start with laying cement mortar along the contour of the territory, in which we lay out the very first layer with bottles, the necks of which are directed to the supports, then again there is a layer of cement mortar and again a layer of containers, which are staggered relative to the first layer.
2. The best decor is if the bottoms-“flowers” ​​are visible, which can be painted in advance in any shades of flowers.
3. To appearance such a flowerpot turned out to be very effective and beautiful, it is necessary to hide the necks under the cement mortar as much as possible or hide them with a layer of soil or other available methods.

Mini-flower bed in the form of animals or flowers

If you have equipped the territory near the flower beds with fences and there is nowhere to decorate the site, then there are original ideas- This is the use of plastic containers to create various little animals that will decorate flower beds and so on. And with the help of a large plastic bottle, you can make a container for flower beds or small flower beds. They are usually made in original forms.

Garden fences

For example, the figure of a pig or a hedgehog looks elegant. Children are delighted with such decorative elements of the infield. In this case, they take any plastic bottle, cut off a square on one of its sides, and make holes on the opposite side to ensure drainage. From this square you can make ears, a tail and much more. We paint the resulting structure. Such a mini-flower bed, the manufacturing process of which is shown in the video, is mobile, it can be moved around the garden.

Fence or wall made of plastic bottles

In order to create high fences, supports are needed. You can take vertical or horizontal options. For example, a wooden pole. In this method, the technology is the same: we string plastic bottles on the wire, which then need to be attached to the cross bars. So you can build a fence about 1.5 meters high or more. The wall can be formed as a flowerpot and rigid vertical supports are also required, which must be removed from the site after construction work.

Mosaic flowerbed

Flowerbeds play a decorative role, as there is no vegetation inside. They are designed to decorate playgrounds or adjoining areas, complementing the surrounding atmosphere with positive emotions from the sight of such bright flowers.

Advantages of flower beds from plastic bottles

Flowerbeds made of plastic bottles have the following undeniable advantages:

• reduce the negative impact on environment;
• long service life of such a flower bed due to the durability of the material used. This is quite acceptable when you like to grow perennials in your garden. Fences made of such material do not allow plantings to grow beyond the territory of the flower beds;
• helps prevent excessive drying of the soil;
• you can replace individual elements of the flower garden if one of them is damaged.

Flower beds can be decorated in the most unusual ways. Variants of shapes, sizes, materials used depends only on your imagination. A beautiful, functional flower garden can be made from improvised materials. What could be more accessible and cheaper than a plastic bottle? Often the hand does not rise to throw away the containers left after the holidays, household use. Would it come in handy? If such goodness in the country or in country house accumulated more than enough, it's time to think about their useful application. Flowerbeds made from plastic bottles are easy to assemble. The container can be used for fencing and as containers. To create an original composition, you will need several dozen bottles, garden tools, scissors and creative idea(you can come up with it yourself or borrow it from the Internet).

Benefits of using plastic containers

Experienced gardeners know that household plot or a country garden is not only a place for growing and harvesting. Creative ideas are realized in lawn decorations, do-it-yourself construction of original borders, landscape decoration.

It is not difficult to collect enough plastic containers for arranging the beds. Almost every day the family buys something in plastic containers - milk, kvass, mineral or sparkling water. If you can’t collect containers on your own, connect relatives and neighbors. Bottles have different shapes, sizes, colors. Different shades will help to realize this or that idea, make the flower bed bright and colorful. Food grade plastic can be transparent or colored in black, white, green, red, brown, blue and other colors.

The plastic used for packaging has high strength, does not collapse from humidity, temperature changes. It's durable, and it's free! Large containers of 3.5 liters can become containers for planting small or single plants. For arranging a border assembled from plastic bottles, 1.5-2 liter containers are suitable.

After installation, the containers need to be filled with something. So they will not be blown away by the wind, they will retain their shape. Small construction debris left on the site will fit to fill: clay, sand, expanded clay, pebbles, construction slag, stone chips.

The constructed flower bed for the winter is easy to disassemble if desired. For the next season, build the same or implement a different idea. You can leave the structure of plastic containers as the only decoration of the site in the cold season. Plastic is easy to cut. Does not limit the imagination the possibility of using bottles in various forms: whole, cut off, only the bottom or only the neck.

To equip the beds, you can use a variety of packaging containers - buckets, jars, containers from under vegetable oil, mayonnaise, mustard.

Decorating lawns, flower beds with plastic bottles is gaining popularity. Such a fence is cheap, does not require special care, surface treatment. So, the advantages of using plastic containers for the construction of beds:

• availability;
• ease of processing;
• multifunctionality of application;
• practicality;
• easy care;
• protection of plants from weeds;
• retain moisture well in the soil;
• easy to assemble with your own hands;
• ease of replacement of structural elements;
• durability (the decay period of food plastic is about a century);
• help to delimit the site into different zones.

The disadvantage of plastic containers is that they are easily deformed. However, elements can be easily replaced with similar ones. This will not require much time and significant material costs. For environmentalists, the environmental component of the issue is of considerable importance. Plastic thrown into the garbage significantly pollutes the environment. To maintain ecological balance great importance has the reuse of unnecessary things.

Vertical bottle placement

The option with vertical placement of elements is the easiest to build a flower bed with your own hands from plastic bottles. For better stability, protection against deformation, the containers must be filled with earth or small debris. Suitable bottles of transparent, darkened, colored plastic. If desired, the elements can be painted in any color before installation.

Usually, 1-2 liter containers of the same size are used, or alternating different ones. Before starting the bottle, you need to prepare:

• remove labels;
• wash;
• dry.

Vertical fencing of a flower bed is quick and easy to make. First you need to come up with a configuration, layout of elements, the shape of a flower bed. On the site, markup of the planned drawing should be applied. Then a shallow trench is dug across the width of the tank. Prepared containers should be filled, dug around the perimeter and secured so that they do not stagger. Each next element is installed close to the previous one. Capacities are dug into the ground about half. If gaps are allowed when laying out the bottles, the structure will quickly loosen and collapse. Despite the apparent simplicity, the result will be a well-groomed and tidy flower bed.

It is convenient to build a flower bed from containers with a cut neck. In washed transparent bottles, the filler in the form of small stones will look good. From small containers you get a low fence. The larger the bottles used, the higher the bed. The bottom of the bottle resembles a flower. If you place the bottles upside down and paint, the original low fence will come out. It is better to apply the paint from the inside, so it will not be erased longer. With a horizontal installation, you can enclose an existing flower garden. Plastic containers will perfectly strengthen the perimeter, beautifully highlight the area. In addition, such a fence is resistant to different weather conditions.

Horizontal bottle placement

You can also decorate the borders on the site using the horizontal arrangement of plastic bottles. This method is slightly more complicated and more time consuming than vertical installation. The trench for the fence is dug at a shallower depth than in the previous method. It is not necessary to cut the neck of the bottles.

In this way, multi-tiered fences are formed that look aesthetically pleasing and original. The necks of the bottles of the lower tier, after being dug in, are fastened with a net and dug in with earth. Containers are selected the same size and shape.

Bottles can also be fixed horizontally using cement mortar on any basis - for example, a barrel or tires. Form a flower bed should be from the bottom up, applying the solution to small areas, fix the containers. Do not apply mortar to the entire area - the cement will quickly harden. Each bottom layer serves as a support for the next.

You can mask the attachment points with small stones. Such a large flowerpot is installed without a bottom, so water will not stagnate in it. If the barrel has a bottom, several drainage holes are pre-drilled in it. The advantage of a flower bed is its mobility. With little effort, it can be moved around the site.

Arrange flower beds for suburban area possible in various ways. In this case, it will be necessary to build a border so that it is convenient to take care of the flowers, and the earth does not crumble. It is possible to equip a beautiful and functional flower garden on the site from available improvised materials. If your household has accumulated a supply of plastic bottles, it is easy to use them for the garden and garden - for example, by using them as a fence for a flower bed. Such a fence is easy to build, and if necessary, it is also easy to dismantle and move to another place.

This material is readily available for use on garden plot and also easy to handle. Many people simply throw away plastic (PET) bottles from various drinks, and in vain - after all, such containers can be successfully used for growing seedlings, as containers for planting various garden plants, as well as for decorating beautiful and functional mini-fences for flower beds and flower beds . It is easy to build fences for flower beds from plastic bottles or fences on your own - almost any shape and size.

In addition, plastic is quite practical and functional as a fence for flower beds in a garden plot. It is worth noting the following advantages of using plastic bottles for arranging flower beds:

• it is easy to take care of such a flower bed, since the plants planted in the flower bed, including perennials, will not be able to grow beyond the plastic fence. Similarly, weeds will not be able to get inside the flower bed from the outside;
• plastic bottles as a flower bed fence effectively conserve moisture, preventing the soil from drying out;
• In this way, it is easy to delimit the site into functional zones and protect the flowers from trampling. With such "fences" the territory of the site will look more neat and well-groomed;
• It is known that plastic containers present a certain difficulty in disposal, since thermoplastic is durable - the period of its decomposition in natural conditions is about 100 years. Such properties of plastic can be successfully used to build a durable flower bed. Although plastic is quite easily deformed, the individual components of the plastic bottle fence that have become unusable can be easily replaced with similar elements.

Varieties of flower beds from plastic bottles

You can use plastic bottles for arranging flower beds on the site as follows:

It is worth noting that with the help of a vertical arrangement of bottles, you can protect an existing flower garden, and a horizontal fence can be built at the stage of creating a flower bed.

How to make a flower bed from plastic bottles

To arrange a flower bed, you can use bottles made of darkened or transparent plastic. In the second case, it is recommended to pre-paint them in any suitable colors - this way the bottle flower bed will look more elegant and tidy in any weather. Most often, for the construction of flower beds, bottles with a volume of 1 - 2 liters are used, of the same shape and size, or alternating different ones. It is convenient to lay out decorative plastic compositions from small bottles, since with an increase in their size, the size of the flower bed will increase accordingly.

Preparing plastic bottles

Before starting work on creating a flower bed, you will need to first prepare the bottles - remove the labels from them, rinse and dry thoroughly. To give greater stability to the vertical structure, they can be filled with any bulk material- dry and clean sand, small pebbles, river pebbles or soil. For the construction of flower beds it is convenient to use containers with cut necks. In transparent and carefully washed bottles, such a filler will look quite decorative.

Looking closely, you can see that plastic bottles with a bottom shape resemble a flower. If you paint it and place the bottles prepared in this way around the perimeter of the flower bed, you get a very nice low fence. It is recommended to apply the paint from the inside of the bottle so that the coating lasts longer. Additional decor, cut from the same plastic, will give the design a special touch.

Vertical placement of plastic bottles

Before proceeding with the construction of a fence from vertically located plastic bottles, you should consider the configuration of the future flower bed (it can be almost any) and mark the perimeter.

• according to the marking contour, it is necessary to dig a shallow trench with a width corresponding to the thickness of the bottle;
• further, plastic bottles filled with pebbles or sand must be sequentially installed into the prepared groove as tightly as possible so that there are no gaps between them until the fence is fully formed;
• installed bottles are dug halfway into the ground so that the fence is securely fixed.

As a result of the simple work done, you can get an excellent result - a fence made of plastic bottles will firmly fix the flower bed and help to highlight it beautifully on the site, moreover, it is resistant to any weather conditions and looks very neat.

Horizontal placement of plastic bottles

A flower bed of horizontally arranged plastic bottles looks unusual and bright. An old metal barrel is suitable as a basis for it - if it is cut horizontally into two parts, the resulting parts can be used to equip two flower beds. In addition, stacked old tires can also be used to build such a structure. It is worth considering that the dimensions of the resulting flower bed will depend on the dimensions of the base. Prepare also plastic bottles and stack them nearby.

It is preferable that such an improvised outdoor flowerpot-flower bed does not have a bottom, then moisture will not stagnate in it and the plants will feel quite comfortable. If the base of the structure is equipped with a bottom, several drainage holes should be drilled in it in advance - such a flower bed will turn out to be mobile, it can be easily moved to the right place like a street flowerpot.

Stages of work:

1. First you need to prepare a cement mortar (at the rate of 2 parts of sand and 1 part of cement).
2. Next, you will need to consistently (from bottom to top) apply a solution to the base of the flower bed - so that you can subsequently fix the necks of the bottles in it. Do not process the entire surface of the base at once, otherwise the cement will harden too quickly.
3. Starting from the bottom of the structure, it will be necessary to consistently fix the necks of the bottles in the solution layer, lining them up in rows in a checkerboard pattern. The first layer will later serve as a support for the second, which, in turn, will support the adjacent layer, and so on.
4. In a similar way, it will be necessary to gradually form the entire surface of the base into a geometrically correct design. At the same time, do not forget to make sure that the solution sets well.

The places where the top row of bottles are attached to the cement screed will not look very neat, so they will need to be masked in the future. To do this, after filling the inside of the flower bed, the necks of the bottles fixed in cement should be decorated with small pebbles, cones, moss or any other material of your choice.

The internal filling of the flower bed will need to be organized as follows:

• a drainage layer is poured into a flower bed installed at a permanent location - brick fragments, river pebbles, crushed stone are suitable for this;
• fertile soil must be placed on top for subsequent planting.

Making a decorative flower bed from bottles

For the construction of a stylized decorative flower bed from plastic bottles, it is necessary to prepare bottles of various colors. In this way, you can lay out various ornaments, images of animals, fruits, insects, etc. For example, a "swan" flowerbed made of plastic bottles or a "ladybug" will perfectly fit into the surrounding landscape of a summer cottage.

An approximate scheme for placing bottles can be drawn up independently (according to the principle of patterns for knitting or cross-stitching). By coloring the circuit elements in the desired colors, you can calculate required amount material and approximate consumption of paint.

To design a flower bed from plastic bottles "ladybug" in the country, you must perform the following sequence of actions:

1. First you need to prepare transparent bottles and paint them red, white and black (according to the shades of the wings, head and eyes of the ladybug).
2. Select a site for placing a flower bed and mark up, outlining the outline of the image.
3. Fill this area with soil, forming a low hill out of it like a ladybug's body.
4. Tamp the soil and apply a schematic drawing on it.
5. The flower bed should be surrounded by a border of stones around the perimeter.
6. Next, according to the scheme, it is necessary to sequentially form an image from bottles of different colors, carefully inserting them with their necks down and screwing them into the ground.

In the process of such creative work, one should not forget about the general concept of the work, trying to achieve maximum similarity with the image.

Upon reaching the desired result, your summer cottage will be decorated with an original and funny flower bed.

Flower beds from plastic bottles - photo

Flower beds from plastic bottles - video

Ordinary plastic bottles sometimes turn out to be a very necessary, useful and cheap material in everyday life. Used plastic does not litter the environment, but gets a second life, proving to be a valuable way to make many original things. In this article, we will describe the process of creating spectacular flower beds for parks. country houses and suburban areas. You'll get detailed master class to create a flower bed from plastic bottles with your own hands.

For convenience, when caring for flowers around a flower bed, you need a border that can be built from unnecessary bottles, the very ones that sometimes accumulate in abundance in the household at home and in summer cottages. That it will turn out necessarily beautiful, you can see in the photo.

As a fence flower beds this material is very comfortable. It retains moisture, preventing it from spreading outside the flower garden. Useful plants do not grow beyond the fence, and weeds are not able to penetrate inside it.

How to make a border

Curb bottles come in a variety of shapes, capacities, uses, qualities and colors, depending on what you have on hand. The main thing is that they are the same among themselves. Hard plastic is preferable, but absolutely everything will do, you just need to show your imagination and taste.

• It is possible to have a fence in the manufacture of a curb, both in a vertical and in a horizontal direction. In the first case, plastic containers do not need initial processing.

For pre-treatment, it is necessary to stock up on paint in sufficient quantities. And not just any will do. Without fail, it must be resistant to water, and the texture is dense. Please note that acetone-based dyes will damage plastic. Oil paint is fine if you are not bothered by a specific smell and long terms her drying out. You can use a spray bottle. This will facilitate the work, and the result will completely satisfy you.

For this, a trench is dug, of a pre-selected depth. It all depends solely on your preferences. From how deep you go into the ground, digging with a shovel, the height of the fence depends.

After that, the process of tightly packing the bottles should begin. In case you decide to have the source material vertically, act in the chosen direction, while filling the stacked bottles with earth, which is compacted at the end of the process. All this is done in such a way that the border turns out to be the depth you need.

When laying the source material in a horizontal way, it will be more difficult for you, because the process itself requires precision. Here the trench you dig will not be as deep. And the necks of the bottles this case cropping is not recommended. Their bottoms can optionally be turned inside the flower garden or, if you like it more, in a completely opposite way. This method is good because it allows you to strengthen the fence, making it multi-tiered. It is difficult to perform, but it looks much more beautiful. At the very end, the necks of the bottles must be fastened with a net and thoroughly sprinkled with earth.

In summer, it is difficult for owners of cottages and garden plots to find a more affordable item than an ordinary plastic bottle. In the heat of mineral waters and carbonated drinks, people drink in such quantities that it is hard to imagine. Therefore, most likely, when you finish working on the curb, you will still have some amount of plastic debris. And this leftover can be used to build structures to decorate and successfully design the resulting flower bed, and then you will learn how to do this.

And another element of decor

To create this masterpiece, which you can admire for a long time, is not difficult at all. And the swan flowerbed will look just amazing. The figurine of a swan in this case is only a decorative element, nothing more. At the end of the work, you will place it inside the flower bed, as shown in the photo.

To make a flower bed, you will need a piece of plywood of a small size, as well as wooden or plastic slats. The body of the figurine, which will be made in the form of a flower vase, is best made from a disused container. Literally everything is suitable here from unnecessary basins and bowls to old boxes. And even if you don’t have anything like that at hand, just take a plastic film. After tearing out a hole, wrap the inner walls of the recess with it, and put pebbles on the bottom so that water flows freely during irrigation.

If you have a jigsaw, then you can make the neck and head of a bird quickly and in just a few minutes. In the absence of it, you will have a little more difficulty due to the need to operate with an ordinary knife and manually, cutting out graceful curves. But if you first facilitate your work and draw a conceived scheme on the rail, you will greatly simplify the task.

It is very important for the appearance of the figurine to carefully build the plumage of a bird, for this you should cut the slats-slats so that they make segments of the same length. Next, these blanks need to be painted white (if you wish, you can make the swan black). And if you decide to create a composition, it is possible to erect two swans of different colors at once.

Decorative flower bed for the garden

It is extremely beautiful to plant some bright flowers inside the black swan: red or yellow. But if you do not like this idea, come up with something creative to your liking, opening up full play to your talents. And if you like variety, then next year you can plant other types of flowers in the flower bed, and the composition will look different every time. Make a choice to your taste, the main thing is that the plants planted by you bloom for a long time and please the eye.

And it is not at all necessary to plant flowers directly into the ground; you can put flower pots inside the structure. And the swan itself, as a decoration for the garden, should be moved from place to place from time to time.

If you follow our advice, then you will surely succeed in bringing this idea to life. And it’s not even necessary to make a flower bed in the form of a swan, you can use images of a wide variety of animals.

Video tutorials on the topic

Now, if you decide to try to implement the ideas described in our article, you can try right now. And to make it clearer and easier for you, watch the video tutorials that we have selected for you. There you will learn many new and interesting details about the design of flower beds with plastic bottles.

Most interesting articles:

Flowerbeds from plastic bottles: a master class with various examples of colorful design

This material is valuable because it is accessible and convenient.

Ordinary plastic bottles sometimes turn out to be a very necessary, useful and cheap material in everyday life. Used plastic does not litter the environment, but gets a second life, proving to be a valuable way to make many original things. In this article, we will describe the process of creating spectacular flower beds for parks of country houses and summer cottages.

You will receive a detailed master class on creating a flower bed from plastic bottles with your own hands.

For convenience, when caring for flowers around a flower bed, you need a border that can be built from unnecessary bottles, the very ones that sometimes accumulate in abundance in the household at home and in summer cottages.

That it will turn out necessarily beautiful, you can see in the photo.

As a fence for flower beds, this material is very convenient.

It retains moisture, preventing it from spreading outside the flower garden. Useful plants do not grow beyond the fence, and weeds are not able to penetrate inside it.

How to make a border

Before starting work, it is necessary to think over its details well.

Curb bottles are suitable for a wide variety of types, capacities, uses, qualities and colors, depending on what you have on hand.

The main thing is that they are the same among themselves. Hard plastic is preferable, but absolutely everything will do, you just need to show your imagination and taste.

But helpful tips still useful:

• For a nice design, you can use both darkened and transparent material, but it is better to pre-paint it in a color that is pleasant for you.
• When choosing the size of the bottles, it should be taken into account that with an increase in the material, the size of the flower bed itself will also increase.
• It is possible to have a fence in the manufacture of a curb, both in a vertical and in a horizontal direction.

  In the first case, plastic containers do not need initial processing.

• When laying the bottles, they should be filled with earth. You can pre-cut their neck for easy filling. On the one hand, this method greatly simplifies the process, because the trench for laying bottles can not be dug very deep. But on the other hand, the fence will be less durable precisely for this reason.

For pre-treatment, it is necessary to stock up on paint in sufficient quantities.

And not just any will do. Without fail, it must be resistant to water, and the texture is dense. Please note that acetone-based dyes will damage plastic. Oil paint is quite suitable if you are not embarrassed by a specific smell and long drying times. You can use a spray bottle. This will facilitate the work, and the result will completely satisfy you.

After you have completed all the preparations, you can proceed to the main part - the construction of the border.

For this, a trench is dug, of a pre-selected depth.

It all depends solely on your preferences. From how deep you go into the ground, digging with a shovel, the height of the fence depends.

After that, the process of tightly packing the bottles should begin. If you decide to arrange the source material in a vertical manner, proceed in the chosen direction, while filling the stacked bottles with earth, which is compacted at the end of the process.

All this is done in such a way that the border turns out to be the depth you need.

When laying the source material in a horizontal way, it will be more difficult for you, because the process itself requires precision. Here the trench you dig will not be as deep.

And the necks of the bottles, in this case, are not recommended to be cut. Their bottoms can optionally be turned inside the flower garden or, if you like it more, in a completely opposite way. This method is good because it allows you to strengthen the fence, making it multi-tiered.

It is difficult to perform, but it looks much more beautiful. At the very end, the necks of the bottles must be fastened with a net and thoroughly sprinkled with earth.

How to make a flower bed a work of art

In summer, it is difficult for owners of cottages and garden plots to find a more affordable item than an ordinary plastic bottle.

In the heat of mineral waters and carbonated drinks, people drink in such quantities that it is hard to imagine. Therefore, most likely, when you finish working on the curb, you will still have some amount of plastic debris. And this leftover can be used to build structures to decorate and successfully design the resulting flower bed, and then you will learn how to do this.

Creating with your own hands a variety of original crafts and placing them in a conspicuous place in country garden, you will be very pleased with yourself and will be able to show off the creations of your hands to neighbors and friends who will come to visit you.

These decorations will be bright, wonderful and interesting element in the design of parks in a country house and household plots of various purposes and sizes.

How to decorate a flower bed with plastic bottles

And another element of decor

To create this masterpiece, which you can admire for a long time, is not difficult at all.

And the swan flowerbed will look just amazing. The figurine of a swan in this case is only a decorative element, nothing more. At the end of the work, you will place it inside the flower bed, as shown in the photo.

To make a flower bed, you will need a piece of plywood of a small size, as well as wooden or plastic slats.

The body of the figurine, which will be made in the form of a flower vase, is best made from a disused container. Literally everything is suitable here from unnecessary basins and bowls to old boxes.

And even if you don’t have anything like that at hand, just take a plastic film. After tearing out a hole, wrap the inner walls of the recess with it, and put pebbles on the bottom so that water flows freely during irrigation.

If you have a jigsaw, then you can make the neck and head of a bird quickly and in just a few minutes. In the absence of it, you will have a little more difficulty due to the need to operate with an ordinary knife and manually, cutting out graceful curves.

But if you first facilitate your work and draw a conceived scheme on the rail, you will greatly simplify the task.

It is very important for the appearance of the figurine to carefully build the plumage of a bird, for this you should cut the slats-slats so that they make segments of the same length. Next, these blanks need to be painted white (if you wish, you can make the swan black).

And if you decide to create a composition, it is possible to erect two swans of different colors at once.

Decorative flower bed for the garden

Once you've completed the bulk of your work, consider the types of flowers that will work with the arrangement. It is very important that everything is combined in style and color. It looks very impressive if you plant flowers of the same color inside a white swan to complete the classic image of this beautiful bird.

It is extremely beautiful to plant some bright flowers inside the black swan: red or yellow.

But if you do not like this idea, come up with something creative to your liking, opening up full play to your talents. And if you like variety, then next year you can plant other types of flowers in the flower bed, and the composition will look different every time. Make a choice to your taste, the main thing is that the plants planted by you bloom for a long time and please the eye.

And it is not at all necessary to plant flowers directly into the ground; you can put flower pots inside the structure.

And the swan itself, as a decoration for the garden, should be moved from place to place from time to time.

If you follow our advice, then you will surely succeed in bringing this idea to life.

How to make flower beds from plastic bottles - original ideas and workshops

And it’s not even necessary to make a flower bed in the form of a swan, you can use images of a wide variety of animals.

Video tutorials on the topic

Now, if you decide to try to implement the ideas described in our article, you can try right now.

And to make it clearer and easier for you, watch the video tutorials that we have selected for you. There you will learn many new and interesting details about the design of flower beds with plastic bottles.

Most interesting articles:

How to make a plastic bottle flower bed fence your own

Than only in the country they do not enclose the beds.

All sorts of materials lying around in the yard are used. By right, a plastic bottle can be considered a hero of our time. On the farm, they are trying to adapt it as a feeder, drinker, watering device, etc. Gardeners are popular with beds made of plastic bottles, on which flowers and garden crops can be grown.

Content

Options for making beds from PET bottles

It is not difficult to make beautiful flower beds from PET bottles with your own hands.

Crafts for the garden from plastic bottles

So let's take a look different variants cultivation of the suburban area.

Advice! To get a beautiful garden bed, you need to try to collect multi-colored plastic bottles, and combine different fencing options from them.

The simplest border

The simplest fencing of a flower bed can be made with your own hands by simply digging bottles along the contour of the garden.

It should be noted right away that it will take very a large number of containers. Bottles are only one size. It is optimal for a curb to use containers with a capacity of 1.5–2 liters.

Now let's move on to color.

Transparent bottles inside can be painted in any color. This gives free rein to fantasy and fiction. To do this, take a white acrylic paint, add the color you like, and then dilute to a liquid consistency. It is very easy to paint the inner walls of the bottle.

A little liquid paint is poured into the container, closed with a cork and shaken vigorously. After achieving the desired effect, the excess paint is drained.

Advice! If you are lucky enough to collect multi-colored plastic containers, the staining process is eliminated. The plastic retains its factory color for a long time, without fading even in the sun.

A border of plastic containers can be made in three ways:

• In each bottle, the part tapering to the neck is cut off.

  A container with a bottom is tightly clogged with damp soil, and inverted, they are dug along the contour of the bed.

• In order not to cut off the neck of each bottle, you will need a lot of dry sand or soil.

  All containers are filled with loose filler to the very top, after which they are twisted with corks. Further work consists of the same instillation of bottles upside down.

• From brown or green bottles with your own hands, you can make the simplest heating of the garden. The entire container is filled with plain water, tightly twisted with corks, after which they are dug in along the contour of the garden in a similar way. Since the dark color attracts the heat of the sun well, bottled water will heat up during the day. At night, the accumulated heat will warm the soil of the bed along with the root system of growing plantations.

All options for made borders will last for many seasons. If necessary, the bed fence can be easily removed from the ground to be moved to another place or simply thrown away.

Making a vertical flower bed

In a small summer cottage, a vertical flower bed allows you to save space, but at the same time grow as many flowers or strawberries as possible.

There are many options for making vertical flower beds, but in any case, you will need a strong support to secure the bottles.

Any vertical structure will act as it. It can be a building wall, a fence, a mesh fence, a pole, or a downed wooden shield.

Consider two options for the manufacture of vertical beds:

Having shown imagination, you can make high beds of complex shape from plastic containers with your own hands. Suppose, after the manufacture of an ordinary vertical bed, there are a lot of bottoms cut off from bottles.

They make an excellent flower vase. As the base of the structure, you will temporarily need a large children's ball. The bottoms of the bottles are glued together with a hot gun, but they are not fixed to the ball. It is needed only to give shape to the garden. From the bottoms you should get a ball, as shown in the photo, but a large neck remains at the bottom for filling the soil and planting plants.

The finished ball is turned upside down, the ball is blown off and taken out from the inside.

The resulting spherical flowerpot is installed in a permanent place. For reliability, the bottom can be cemented. The bottom of the flowerpot and the side walls are covered with geotextiles.

It will prevent the soil from spilling out, plus it will allow excess water to leave the garden after rain. Fertile soil is poured inside the flowerpot and plants are planted.

Advice! Using a similar method, the garden bed can be given any shape, for example, boats.

Hanging flower beds

Ornamental plants and flowers look beautiful in hanging beds.

In fact, this design resembles a planter, only instead of a flower pot they hang a plastic bottle. The container can be positioned with the neck up or down, as you like.

Consider one of the examples of making a suspended garden bed:

• A large through window is cut out in the side walls.

  From below, the side is left higher to make a place for the soil.

• From above, the bottle is pierced through and through the holes a rope is pulled for hanging.

  Instead of a cord, a chain or simple wire will do.

• A drainage hole is drilled at the bottom of the bottle. Excess water after watering will drain through it. If the container with the flower will hang under a canopy, you need to take care of a small pallet. Otherwise, after each watering dirty water will drip onto the floor or a passing person.

I pour the soil inside the prepared bottle, plant the plant, and then hang it on a nail or hook.

Original flower beds from large bottles

If there are small children at home, you can make a fabulous flower bed for them with your own hands.

The heroes of modern cartoons are locomotives, robots, cars, etc. All these characters can be made from large five-liter containers. Typically, these bottles are made from transparent plastic, so you will have to bring beauty with paint.

The easiest way is to make a train with wagons, a boat or a pig out of bottles. The basis of the design is a container laid on its side with a hole cut out from above for planting flowers.

Wide corks taken from five-liter bottles will replace the wheels of a train or car. If the bed is in the shape of a piglet, the ears are cut out of a colored bottle, and a patch on the cork can be drawn with a marker.

The video shows a master class of flower beds from bottles:

Two more ways to make a vertical bottle garden

Now we will look at two more ways to make a bed out of plastic bottles so that it takes up a minimum of space in the yard and is beautiful.

By right, these structures can also be called vertical.

Boat wall

This method of making vertical beds is suitable even for decorating walls finished with expensive decorative plaster.

The thing is that the wall does not have to be drilled to secure the bottles. All containers are suspended on ropes according to the principle of a rope ladder. For each row, it is optimal to use one of your own color of plastic containers in order to achieve aesthetics.

To make beds in all bottles, one large window is cut out on the side. In horizontal form, the container resembles a small boat. Further, small but strong hooks must be fixed to the eaves of the building. They must support the weight of the boats with soil.

On each bottle, through holes are made in the neck and bottom area, through which a nylon cord is pulled. Under the capacity of each row, a thick knot is tied on a rope. He will not let the bottle slide down.

It is optimal to make each ladder step between the boats 50 cm, and all adjacent rows must be hung with an offset up or down by 25 cm.

On the wall, you will get even horizontal rows of boats, but the bottles themselves will hang in a checkerboard pattern relative to each other. This arrangement will help to optimally cover the entire wall area, while maintaining a large space between the bottles in a vertical row for the free growth of plants.

Pyramid bed

To make this bed model, you will need to build a pyramid. What size it will be depends on the owner. If the farm has wooden beam, from which you can assemble the frame of the pyramid. On the jumpers, horizontally stacked five-liter bottles with a cut-out window for plants are fixed with self-tapping screws.

A flower garden pyramid can be made from boards. On each tier, the workpieces are placed flat or at a slight angle. Under the flower pots in the boards, holes are drilled with a drill with a round nozzle.

The bottles are cut in half, the neck is thrown away, and the lower part is inserted into the prepared holes. To prevent the pots from falling out of the pyramid, the upper edge of the bottle is folded over, after which it is fixed to the board with a stapler or self-tapping screw.

Conclusion

There are a lot of options for making beds from plastic containers. There are no requirements for these designs, so each master shows his own talent.

DIY crafts from plastic bottles
How to make a garden fence out of plastic bottles
Beds from plastic panels to give their own hands
DIY flowerbeds from plastic bottles photo
Beds from plastic bottles
Motorhome - catalog of motorhomes buy in Moscow

Bottles for bottles from plastic bottles: a master class with various examples of colorful shapes

This material is valuable because it is affordable and convenient.

Ordinary plastic bottles are sometimes very useful, useful and cheap.

The plastic used does not pollute the environment, it takes on another life, which turns out to be a valuable way to create many original things. In this article, we'll walk you through the process of creating spectacular home park and suburban prefabs. You will prepare a detailed master class on creating a flower bed from plastic bottles with your own hands.

For the convenience of caring for flowers around the flower bed, you need a border, which can be made from waste bottles that sometimes accumulate in different houses of the house and in suburban areas.

You can see the photo in what is absolutely necessary.

This material is very convenient as a flower bed. It retains moisture, prevents it from spreading through the color.

Useful plants do not grow above the fence, and weeds cannot enter it.

How to make a border

Before you begin, you need to carefully consider your details.

The edges of the curb will match different types, every opportunity, purpose, quality and color, depending on what you have at your fingertips. The main thing is that they are identical to each other.

Hard plastic is better, but whatever it does will show its imagination and taste.

Useful tips are still useful:

• For a good shape you can use a dark and transparent material, but it is better to paint it in a pleasant color.
• When choosing the size of the bottles, it should be noted that the size of the flower bed will increase with the increase in material.
• Guardrails can be positioned both vertically and horizontally when the curve is running.

  In the first case, plastic containers do not require initial processing.

• When laying the bottles, they must be filled with soil. Previously, you can cut out the door for easy charging. On the one hand, this method greatly simplifies the process, because the trench for laying the bottles cannot be dug deep. But, on the other hand, the fence will be less accurate for this reason.

For pre-treatment, you need to accumulate enough paint.

And not at all. Without breaking, it should be waterproof and the texture is dense. Please note that colors based on acetone solvents will degrade plastic. An oily color is very suitable if you do not soften the special smell and long periods of drying. You can use a spray container. This will make your work easier and the result will satisfy you.

After completing all the preparations, you can continue the main part - the location of the border.

To do this, dig a bright, pre-selected depth.

It all depends on your desires.

The best plastic bottle craft ideas to give them a hand

Due to how deep you go into the ground when digging with a shovel, the height of the fence depends.

After that, the process of tightly packing the bottles should begin. In case you decide on a vertical layout of the raw material, work in the chosen direction while you sleep with the bottles, which are provided with soil that shrinks at the end of the process.

All this is done in such a way that the border shows the depth you need.

When laying the source material horizontally, you will have more problems because the process itself requires precision.

This ditch you're digging won't be that deep. And the neck of the bottles, in this case, is not recommended for trimming. Their bottom can be turned into a flower garden at will or, if so, the opposite is preferred.

This method is good because it allows you to strengthen the fence and make it layered. It's hard to do, but it looks much better. At the very end of the bottles, it should be sealed with a net and carefully sprinkled with soil.

How to make a flower artwork

During the summer, summer home owners and garden community owners are hard pressed to find a more affordable item than the average plastic bottle.

In warm mineral waters and carbonated drinks, people drink in amounts that are hard to imagine. So chances are, when you're done curbing, you still have plastic leftovers.

And this residue can be used to create structures for decoration and to successfully create a flower bed, and then you will learn how to do it.

You create your hands from different original crafts and place them in a prominent place in the garden, you will be very pleased with yourself and you will be able to show off your hand creation to neighbors and friends who visit you.

These decorations will be a bright, wonderful and interesting element in the design of parks in the country and in estates of various purposes and sizes.

How to decorate a flower garden with plastic bottles

And one more element of decoration

If you want to create this masterpiece that you can admire for a long time, it's not difficult at all.

And the swan will be just wonderful. The number of the swan in this case is just a decorative element, nothing more. At the end of the work, put it on the flower bed, as shown in the figure.

To complete the workpiece, you need a piece of small plywood, as well as wooden or plastic slats.

The body of the figurine, which will be transported as a flower vase, is best made from an empty container. Everything here comes literally from unnecessary pools and cups to old boxes. And even if there is nothing like that, refer to the plastic film. Punch a hole, turn internal walls depression and place a pebble on the bottom so that the water flows freely during the rinse.

If you have a puzzle, you can quickly and in a few minutes make the neck and head of a bird.

In the absence of it, it will be a little more difficult for you to work with ordinary knives and manually, carving graceful curves. But if you first simplify your work and prepare a plan on the stand, you will greatly simplify the task.

It is very important that the appearance of the figurine builds beautiful bird feathers, so it is necessary to cut the planks so that they are obtained from segments of the same length.

In addition, these empty surfaces should be painted white (if you want, you can make the linen black). And if they decide to create a composition, two swans of different colors can be placed.

decorative garden garden

Once you've completed most of your work, consider the types of colors that will fit this composition.

It is very important that everything is combined in style and color. It looks very impressive if you planted flowers of the same color in a white swan, so the classic picture of this beautiful bird is over.

Very nice to plant light flowers in black swan: red or yellow. But if you don't like this idea, imagine something creative for yourself to take full advantage of your talents.

And if you like variety, then in next year in a designer flower bed, you can plant other types of flowers, and the composition will look different every time. Make a choice according to your taste, the main thing is that the plants you planted flare up for a long time and are pleasing to the eye.

And no need to plant flowers directly in the ground, you can put flower pots in the plan.

And I swear, like a garden ornament, from time to time to move from place to place.

If you follow our advice, you will definitely recognize this idea. Also, it doesn't have to be floral in the shape of a swan, you can use images of different animals.

Related video tutorials

Now, if you decide to implement the ideas described in our article, you can try it right away.

To make it more clear and understandable, take a look at the video tutorials we have chosen for you. There you will find many new and interesting details about the formation of flower beds with plastic bottles.

Sent by: dive 27.03.2016, 23:27