home Construction

Which hiller is better for a walk-behind tractor. The device and use of a hiller for a walk-behind tractor in a summer cottage. The main stages of manufacturing a disk device

Many gardeners and farmers are interested in how to make a hiller for a walk-behind tractor. Contemporary Agriculture equipped with new technologies. One of the most important types of farm equipment is a walk-behind tractor. Motor cultivators are equipped additional features, such as: hiller, plow, coulter, mower, snowplow, trailer, etc.

Types of hillers for a walk-behind tractor

A walk-behind tractor with a hiller is an indispensable thing on a land plot, because it helps to process different kinds crops, perform heavy agricultural work.

All fixtures from the factory require a certain cost. Farmers are thinking about how to make a hiller for a walk-behind tractor with their own hands.

Types of hillers for a walk-behind tractor:

Disc hiller for a walk-behind tractor consists of 2 discs directed towards each other at a slight angle. They are attached to a special frame, which is attached to the equipment itself through a hitch.
Active hiller (propeller, rotary, paddle, because the principle of operation is based on translational and rotational movements). Suitable for work with three-speed units (2 forward and 1 reverse reverse). At the first speed, the unit spuds the crop, and at the second speed, the device also throws the earth from the inter-row space.
A lister hiller for a walk-behind tractor consists of 2 metal layers interconnected in the form of a triangle. They form rows for planting potatoes. After the bushes grow to a certain size (20-30 cm), they spud them. The rows during processing are even, which gives not only a well-groomed appearance to the site, but also allows potato tubers to develop and grow faster.

Do-it-yourself hiller for a walk-behind tractor

To make a hiller for a walk-behind tractor with your own hands, you will need the following tools:

Welding machine for iron, preferably arc.
Bulgarian, with additional devices.
Drill with different nozzles.
Electric emery.
Gas burner for hardening and heating metal.
Workbench or vise.
Consumables (bolts, nuts) and files.

You will need the details of which it will consist homemade hiller on a motoblock.

In order to get started, you need to acquire drawings and diagrams of the hiller.

Manufacturing schemes and drawings of a hiller for a walk-behind tractor can be found in special literature or in the operating instructions for a walk-behind tractor.

The diagram indicates the dimensions of the tool that will best fit the device. Please allow 1-2 cm deviations.

Disk devices are good helpers for hard work on the land.

A do-it-yourself disk hiller for a walk-behind tractor is the easiest to manufacture.

You will need the following tools and materials:

metal layers 2 mm thick;
bearings and seals;
screw lanyards;
T-shaped leash;
rack.

The disks are installed at an angle to each other, the top of the formed triangle is directed forward. The other 2 angles must be equal. If this condition is not met, then the walk-behind tractor will constantly skid, which is not very convenient during operation and additional settings will be required.

Sheets of a disk hiller for a walk-behind tractor are interconnected by welding or bolts. Lanyards are attached to them, which perform the function of adjustment with a double turn.
It is better to assemble a homemade disk hiller by following the instructions on the drawings.

There is a second way homemade assembly disk products: the plow is connected to the motor cultivator using a bracket. The leash is attached to the hitch with a stopper, connected with bolts. The stopper is inserted into the square tube and then tightened.

Making propeller hillers

It is worth considering how to assemble active hillers (propeller).

For assembly, you will need the following tools and materials:

metal layer 2 mm thick;
apparatus for welding metals (arc);
grinder with additional discs;
consumables (bolts, nuts, etc.);
drill;
bearings and seals;
T-shaped leash and stand.

Active or rotary hillers are in great demand. They can be made both single-row and double-row.

The two-row rotary hiller has its own advantages: with its help, the cultivation of potatoes is 2 times faster.

Propeller attachments have a drawback: they are only suitable for walk-behind tractors with 3 speeds (2 forward and 1 reverse reverse).

The assembly method is similar to the manufacture of disk hillers. They are connected to the cultivator using brackets and a rack with a T-shaped leash. The distance between the paddle discs is chosen by the owner himself, adjusting to the size of his cultivator and the width of the rows.

Double-row hillers are the same lister device, only two are attached instead of one “triangle”.
For manufacturing you will need:

4 metal foxes with a thickness of 2 to 4 mm;
tools for welding and fastening.

The base of the product itself is made from denser sheets of metal. It should be heavier than the hillers themselves, because. it bears the main burden and burden of work.

Hillers are made from a thin layer of metal, bending the wings outward. In this case, a pipe of the desired diameter should be used.

Otherwise, the fasteners are the same technology as disk hillers.

For better job you can mount additional wings to the tool. They are attached to the base through a system of hinges on the provided rods.

The angles of the wings can be adjusted, making even the toughest jobs easy.

The walk-behind tractor with the help of trailed and mounted implements can easily perform year-round work related to rural life. An okuchnik for a walk-behind tractor is necessary, with it you can create furrows for planting, cut beds and plant plants. The efficiency of tillage depends on the design of the tool.

The use of okuchnik when cultivating the soil

The hiller must, overcoming the resistance of the soil, lift it up from a flat area, creating a ridge. The pointed end must be below the surface to the specified depth. It lifts and loosens the soil, and in order to direct the soil to the base of the plant, there are guide planes that create collapse on both sides. The design of the hiller for a walk-behind tractor looks like an arrow from above, on the side the blades look like butterfly wings.

Design improvements relate to contours that reduce drag, make the crest higher or wider. The principle of operation of such a hiller does not change - it loosens, takes out a layer of soil and throws plants planted in a row to the base. In the same way, grooves are cut under.

Another type of hillers for walk-behind tractors is a pair of discs. Due to the thin rim, the structure enters the soil at a given depth with low resistance. They are not stretched in a stationary state, they are spinning, and thus overcome resistance with less effort. But in order for the discs to create a stroke, they must have an adjusted vertical angle of inclination and a take-off angle. The distance between the discs on the frame is set according to the width of the processed row. Look at the video of how they spud potatoes with a walk-behind tractor on the stony soil of Simferopol:

Conventionally, all hillers in form and principle of work are called:

lister;
disk.

At the same time, lister ones have various forms bending planes, an arrow deepening into the ground can have a massive tip. Flaps or shares have a bend, slope, can have an adjustable and customizable profile.

Pairs for a walk-behind tractor must match in size, contour and weight. Otherwise, the comb will not work out even. The system for adjusting the angles of descent and inclination allows you to set the desired profile of the stroke.

For powerful heavy walk-behind tractors, hillers are paired, light weeders for the MTZ walk-behind tractor are mounted in threes.

The device facilitated and accelerated the hilling of potatoes with a walk-behind tractor - video

How to make a hiller for a walk-behind tractor yourself

Mounted implements are not included with the walk-behind tractor. They are made and sold separately. On the agricultural machinery market, for any type of cultivators, you can find a hiller, designed for the draft power of your horse. But the problem is that the finished tool costs more than 10 thousand, and this is a significant amount for a rural resident in modern conditions. But in a landfill or outside the outskirts, you can find everything you need to build a hiller for a walk-behind tractor.

In order to install a propeller hiller, you need to make sure that your walk-behind tractor has a two-shaft engine with reverse, 2 forward speeds. There must be a selective shaft.

First you need to decide whether we will make a disk or lister hiller. A single or double row tool will pull the cultivator. Whether it is necessary to provide sliding wings, adjustable distance between two tools. That is, before building a do-it-yourself hiller for a walk-behind tractor, you need drawings and videos, for example, this:

Of course, you need to have metalworking skills. Not every villager in an abandoned barrel of a heater will make out valuable knots for the economy. Therefore, they go to craftsmen for advice, asking for help.

But not only the disks, the device for attaching them must be thought out, and to help the master, do-it-yourself drawings of a disk hiller for a walk-behind tractor are offered.

Here, in addition to the disks, the dimensions and section of the most important nodes homemade hiller.

The design will change significantly if you manage to find discs from decommissioned cultivators or other agricultural equipment. In any case, in the manufacture of the frame, you will need to consider a disk adjustment system.

The wisdom of masters with golden hands is boundless. So if there are no disks, they can be replaced by a round blade from a circular saw. The steel is of high quality, the teeth additionally loosen the soil. You still have to create a bearing assembly, otherwise saw blade will not rotate. But tool steel and in the hands of a craftsman, a do-it-yourself disk hiller for a walk-behind tractor will work efficiently.

When creating a new fixture in your backyard, do not forget about safety measures. When carrying out welding work, you work with a mask. But at this time, "bunnies" can be caught by relatives, watching the craftsman. When working with a dangerous tool, take care of the safety of others.

Varieties of lister homemade and factory hillers

The simplest unregulated hiller is a solid construction of two divergent figured plates, arranged in a mirror and having a common stiffener.

This is the base, but if you add flaps in the form of adjustable plates to it, you get an adjustable hiller own production. Without plates, this is an excellent cultivator of potato rows, in which the soil is compacted and air does not enter the roots.

The fixed-grip hiller can be used on flat fields, with the same row spacing when using a seeder. Such a tool is used with low-power traction, since adjustable plates create additional resistance to the earth layer.

Motoblocks of medium power are equipped with a device with an adjustable grip. Such designs are used in narrow row-spacings with a width of about 35 cm. Corn rowing is performed by just such a hiller.

But creating a breakup mechanism and making it work are two different stories. To regulate the depth of lowering into the soil, for an even creation of a stroke, a frame structure with a hitch must be made. Only a well-centered unit will spend a minimum of effort for quality soil cultivation. Immersion of the hiller into the ground occurs due to the vertically exposed rack. If the hiller for potatoes to the walk-behind tractor with your own hands goes low when setting up or adjust the angle of the rack on the surface. For a two-row lister tool, when mounted on a frame, it is necessary to accurately set the distance between the booms.

Devices resembling a home fan use translational and rotational motion in tillage. But you can install the tool on a unit with a two-shaft engine with a reverse and 2 gears. There must be a power take-off. The propeller-type hiller is more efficient than other models, but due to the complexity of execution, it is expensive. Craftsmen took the idea, but the tool is not very similar to a propeller.

For the manufacture will require high-quality steel, welding machine and Bulgarian. Details of the “propeller” are welded onto the axles fitted to the frame. In one pass, there is a deep loosening of the earth and its transfer to the ridge. The hiller for the walk-behind tractor is made unregulated, so the corners must be set empirically.

Why do I need a hitch assembly for walk-behind tractor tools

In order for the hiller to be fixed on the walk-behind tractor, in addition to the frame made, there must be a hitch assembly that is adjustable and reliable. By aligning the holes on the rack and on the hitch body and fixing, the implement will form a single unit with the unit.

The handmade universal hitch makes it easy to adjust the tool to the working position. It is in this node that adjustments are made to the position of the rack relative to the ground, radial angles. After adjustment, the nuts are tightened and the device is adjusted to the type of soil, soil moisture, plant height.

How to set up a hiller of any design for work

Any mounted or trailed tillage equipment must be adapted. Before you start working in the field, you need to make sure that everything is set up correctly, secured and adjusted. A test site is selected and a test run is made. At this point, you should listen to the technique, check the stroke profile, the distance between the grips. On the disks it is necessary to set the angles of attack, on the listers - the depth.

It is important to choose the processing speed that would correspond to the power of the mechanism and the quality of the field processing.

Video about disk hillers for walk-behind tractors

Hilling and digging a land plot is quite hard work, which takes a lot of strength and health.

Many summer residents and owners of land plots use such a convenient device as a walk-behind tractor on the farm. They can easily dig up the entire site in a matter of hours. And if you attach various devices to it, for example, a hiller, a lawn mower, potato planters and much more, then the work will be much easier.

In this article, we will consider how to make such a convenient tool as a disk hiller for a walk-behind tractor. First of all, you need to find out what models of this tool are, and only then find out how you can make it yourself. There are 4 varieties of this device.

Hiller models

Lister type hiller

The design of this device is considered the most simple. It has a fixed working width.

It consists of two attached, branched and fixed wings. Due to the fact that the wings are fixed, it is impossible to set the size of the working width by adjusting the device to the row spacing. It is for this reason that when working with this hiller, you have to adjust the aisles themselves to the size of the hiller, and not vice versa.

Basically, all manufacturers produce models with a working width of 25-30 cm. This is not very convenient, because the technology for growing and planting potatoes has a width between rows of 60 cm.

This design has special racks with a thin design that prevent overloading the walk-behind tractor while loosening the hiller of deep layers of hard soils.

There are devices, the design of which has a streamlined look. This is most convenient because such models can be adjusted to any row spacing.

Variable working width

This device is considered the most convenient, since it has an adjustment mechanism that provides a quick change in the position of the wings. Thanks to this property, it can be easily adjusted to any size beds.

However, they have one very unpleasant drawback - they are very difficult to work with. This is due to the fact that when loosening the wings of the device push the earth in different directions, a small amount of which spills out again into the furrow.

As a result, the arms and back begin to get tired, and the main part of the engine power is wasted. But still, despite these shortcomings, these models are popular and in great demand among many landowners.

Disc variety

This type of tool has the following advantages:

goes well with the motoblock. If the disk hiller is used at a reduced speed of the walk-behind tractor, then the power of the tool becomes even greater. Due to this, the efficiency of digging up the soil increases, and also has a beneficial effect on the working process of the tool;

convenient use. During loosening or digging with this device, you do not need to exert a lot of force. He moves forward on his own and there is no need to put additional emphasis on the back;

universal purpose. This tool can be used to loosen the soil, as before planting potatoes (How to make manual hiller for potatoes, read this), and after planting during active cultivation for additional loosening.

If you choose from the proposed models in stores, then it is best to choose hillers made of alloy type metal, the design of which has rolling bearings, a large diameter and thickness of disk elements.

Propeller hillers

The whole principle of operation consists in the operation of the propeller elements. Under their influence, the earth is first dug up and the weeds are cleaned out, and only then the single-row beds themselves are loosened.

These models are mainly used for front-wheel drive motor cultivators (Read about the varieties of cultivators) and motor blocks with two gears. This is because in second gears the power level rises to 180 rpm.

When the power level reaches its maximum, this tool can be used not only for hilling the soil, but also for throwing the earth from bed to bed.

Disc type device

The disk-type hiller device consists of a frame on two wheels and two suspended disk elements. If we consider in more detail all the constituent elements, we can distinguish the following:

T-type leash;

screw tarlepa - 2 pieces. Due to these elements, the angle of rotation of the disk elements is adjusted vertically;

racks - 2 pieces;

disks - 2 pieces.

Adjustment of racks provides convenient change of distance between edges of disk adaptations. For this reason, you can choose the size of the width that you need - from 35 cm to 70 cm.

If you need to set the disk elements to the same size of the angles of rotation, then you need to adjust the tarlips. Without this, the hiller will pull constantly to the side. But the level of inclination of the disk elements is not adjustable and basically always keeps at the same level.

How does he work?

The device is attached to the walk-behind tractor on the clutch bracket without a rower. This is done by a locking element with two bolts and flat washers. The most convenient workflow with it is carried out in the first low gears.

The principle of operation of these hillers is as follows: during movement, the disk elements rake in the soil and make a roller when hilling, sprinkling plants with earth.

The rotational movements of the disk elements provide soil crushing and loosen it additionally.

Good to know: if a two-row hiller is used for hilling potatoes, then it is necessary to install two devices on the clutch at a distance that will be equal to the row spacing.

In addition, this tool has the following advantages:

due to it, high and even row-spacing ridges are obtained;

ease and convenience at work;

small energy consumption.

However, not everything is so good, there are negative sides. These devices, compared with other types, are 3, and sometimes even 4 times more expensive. Of course, a number of factors affect the cost:

the size of the diameter and thickness of the disk elements;

the material from which the tool is made - steel of a simple or alloy type;

adjustment devices.

When buying, you must consider all the nuances. If it seems that this device is too expensive, then you can make it yourself. Moreover, the production is not quite so complicated.

Drawing

Before you start making your own disk hiller, you need to familiarize yourself with the drawings of this tool.

Thanks to them, you can make this tool with the greatest accuracy the first time, and it will last a long time.

Manufacturing methods

Hillers can be made in two ways:

With fixed working width.
With adjustable or variable working width.

Consider these manufacturing methods in more detail.

What can be used from improvised materials

For a lister device, a sheet of steel with a thickness dimension of 3 mm is required. But for a disk device, you need a little more:

covers from simple pans with parameters 50-60 cm - 2 pieces;

tarleps - 2 pieces;

racks - 2 pieces;

one leash in the shape of the letter T.

Self-manufacturing

Lister Hiller

In order to make this device, you need to cut two equal parts from a steel sheet with a thickness of 2 mm. Then you need to bend them so that their radii match.

Then their seams are welded and processed to end up with a perfectly flat surface. AT In the future, these tools can be used for single-row tillage. You can make two such devices, which can later be used for two-row processing of potatoes.

Disc hiller

Manufacturing steps:

Old covers need to be sharpened around the edges.
Next, using a hammer, we bend the disk elements: one side should be convex, the other concave. This is done so that the device calmly rakes the ground and sprinkles the plants with it.
Tarleps, racks and a leash in the shape of the letter T must be fastened together with special fixing bolts and welded.
Disc wheels are connected by adapters.
The disc elements must be installed so that the space between them is the same as the distance between the rows.
Due to the tarlep, the angle of rotation of the disk elements is regulated vertically.
As a result, the entire device is fastened through a leash to the walk-behind tractor bracket using bolts with flat washers and a locking element.

So, the disk hiller is assembled. It turns out that you can easily assemble it yourself with the help of improvised materials. This can save you a significant amount of money.

A disc hiller for a walk-behind tractor is a convenient and necessary thing in agriculture for hilling, loosening, planting potatoes and other agricultural plants.

It will provide convenient and comfortable work when digging up large land areas. It can be easily made by yourself. The main thing during manufacturing is to follow the entire sequence of actions. As a result, you get a convenient tool that will serve you for a long time.

From this video you can learn about hilling discs and how to set them up:

Motoblocks have long been popular among representatives of the agricultural sector. The versatility, compactness and high level of performance of such equipment are increasing every year, because special hinges contribute to this.

On the this moment There are many types of attachments on the market, but one of the most popular is the hiller.

Why do you need a hiller for a walk-behind tractor?

The specified element is used for planting vegetables and caring for them. It works quite simply: after installing the add-on and starting the walk-behind tractor, the part tows the car along the cultivated area with the planted seeds, thereby sprinkling the future vegetation with the necessary layer of moist and slightly loose soil. Such an operation is of considerable importance, because it allows you to protect the seeds from negative atmospheric influences, increase the level of oxygen saturation, and stimulate growth.

Experts note that hilling with a walk-behind tractor also helps to rid the earth of excess moisture in order to avoid decay. After processing, the sun's rays penetrate the soil much better, and some harmful insects end up on the surface, where they are "cleaned" by birds. Some weeds are also destroyed, so elementary processing can be safely considered a partial replacement for the use of herbicides. It is important to note that hillers are most often used to process potato plantings.

Which hiller is better for a walk-behind tractor?

Modern manufacturers of agricultural machinery are trying to meet the ever-increasing demands of users, so each brand produces specialized hillers that are fully adapted to the specifics of a walk-behind tractor of a particular manufacturer. For example, for Neva, MB 2, MB 1 and Agro units, you can purchase the following types of additional assistants:

Hillers for potatoes to a walk-behind tractor with a clearly marked working width

Such an object is considered one of the simplest and has another name - lister. It is used for processing row-spacings of a narrow plan, the width of which does not exceed 30 cm. As for the design features, the hitch consists of several wings fixed relative to each other. This option is suitable for low power walk-behind tractors (about 3.5 hp). A thin rack contributes to the appearance of additional protection of the device from overloads. The negative aspects of such a development include the impossibility of working with wet ground, since the soil simply sticks to the wings, preventing the equipment from performing its task;

Okuchnik with variable working width

The main advantage of this type of tool is the ability to adjust the processing width. With its help, it will be possible to process rows of completely different sizes. Suitable for more powerful machines, because it consumes more energy. Often, such devices have the form of two-row hillers, which make it possible to perform the necessary operations with even greater efficiency. For adequate operation, it is necessary to put the lugs of the walk-behind tractor on extension cords;

Disc hiller

It is considered the most convenient, since it can be used to qualitatively prepare furrows for planting seeds. A feature of the part is the placement of disk-dumps at a certain angle. The productivity of use is much higher than that of the previously considered models;

The specificity of the development of such a plan is the rotation of the wings in several planes. It seems that the lower edge of the wings follows the contour of the crest. This approach allows you to make care more productively with minimal energy costs. Affordability is also a significant plus;

Propeller hiller active plan (rotary)

The technical device allows you to qualitatively perform the hilling procedure, toss the earth precisely to the roots of plants. Important point: you can work with such a device in the second forward gear of the walk-behind tractor, which not every machine can boast of. The increased gear will allow the hiller to rotate at a speed of 160-180 turns per minute, due to which the soil is “transferred” from the row spacing to the rows themselves.

Because in recent times agronomists are increasingly using a two-row hiller, you should consider the specifics of installing a hitch of exactly the specified plan. Often, fixation occurs through the operation of special hitches SV-2 and SV-1/1. A prerequisite for competent installation is the presence of lugs, the diameter of which should not be lower than 600 mm. Otherwise, it will not be possible to avoid squeezing the potato tops by the reducer.

It is important to correctly direct the hiller, because it will be possible to obtain the desired result only if it is oriented parallel to the soil surface. This can be done simply by just adjusting a few bolts on the bracket. In the process, special attention should be paid to the selection of the furrow width and the depth of immersion in the ground, because after processing the ridges should be at the same level. This depth is regulated by several methods:

The master must be guided by the height of the mounting holes;
The presence of screw adjustment (for adjustable objects) will allow, while turning the handle, to change the angle between the frame of the nozzle and the unit itself.

To adjust the width of the furrows, you should use the frame fastening brackets (shift or push them apart). You can also follow the instructions in the following videos:

We create a do-it-yourself hiller for a walk-behind tractor

It is quite logical that the owners of walk-behind tractors want to expand the range of tasks performed by the machine with the help of a hiller. It’s just that some don’t express much desire to spend money on this, trying to create homemade devices. Oddly enough, but they do it very well!

It is worth noting that one cannot do without elementary plumbing equipment.

For further manipulations, you need:

Apparatus for welding (arc);
Electric sharpener;
Gas-burner;
Vise;
Bulgarian. It is desirable that the device be of medium power and have peeling and cutting discs in the set;
Drill and drills;
Files;
Locksmith workbench.

Hiller with fixed and adjustable angle (lister)

We have already commemorated this type earlier, and now we will consider the drawings that allow us to assemble the indicated part on our own.

The fixed type belongs to the class of the most easily created hillers. The base is obtained using a steel sheet, the thickness of which is not less than 3 mm. For its formation, only high-quality materials should be used, because this node has to be the first to meet the resistance of the soil.

To create a bracket, a four-millimeter steel strip should be used. It is important to harden the part after the forming process. A spring leaf can be used as a field board. But for starters, the metal should be “released” and hardened. For the rack, it is important to choose strips with a thickness of at least 8 mm.

Welding is carried out in several passes, on each side of the joint. You can create wings from thinner sheets (2 mm). Special attention must be paid to dimensionality otherwise the docking of the base with the wings may fail.

Almost any template can be used to bend the wings, even a steel pipe of a suitable diameter.

A distinctive feature of the Neva walk-behind tractor is compatibility with almost any type of attachment.

Hillers are designed to form furrows for further planting of crops. Also, with their help, they sometimes loosen the soil and roll the grass from the aisles to the roots of the crops.

The official website of the manufacturer of the Krasny Oktyabr plant offers 4 models. Let's take a look at the differences between each model.

They are all similar in their purpose and end result. But they differ in manufacturers, designs, sizes and functional purposes.

Double-row hillers allow you to simultaneously process two row-spacings with crops. It is a bracket post that connects to the hitch. And two racks with hillers, which are bolted to it. You can adjust the width of the hiller and adjust it to the required conditions.

There are two options on the manufacturer's website.

Double row OND

This hiller is produced by NMZ Energia CJSC.

It is designed to work light and prepared soils. In particular for cultivating land in gardens, greenhouses or small vegetable gardens.

The maximum depth during hilling is 120 mm, the minimum is 80 mm.
The depth of penetration of the unit into the ground can be adjusted manually.
The width of the OND wings can range from 25 to 43 cm.

Okuchnik hinged two-row OND has the following dimensions:

72 cm long,
54 cm high,
35 cm wide.
With such dimensions, the weight of OND is up to 9.5 kg.

The principle of operation of a two-row hiller is shown in the video:

Double row STV

It is produced by the Volga company ZAO VRMZ.

This company immediately offers two options for the manufacture of hillers for the Neva walk-behind tractor. The main difference in them is the width of the wings and the distance between the hulls. That is, everyone can choose the option that suits him best.

The mass of models can be 10 or 13 kg.
The width is from 86 cm to 1 m. The length of the model can be from 39 to 46 cm. And the height is from 46 to 68 cm.
The distance between the shares is adjustable and can be from 21 to 65 cm.
The maximum plowing depth can be up to 15 cm.

As we can see, this model presents a wide range of settings. Therefore, each owner will be able to adjust the hilling devices to suit their needs.
If your two-row CTB hiller is slipping, you can use a solution with upgraded lugs as an option:

Single row STV NPD

They are designed to process only one field row. It is more efficient when viewed from the side of ease of management. Because when working with double-row hiller it is necessary to monitor the work of two rows at the same time. But this is not always possible and it is possible to make the wrong movement and damage the sown crops.

Plus, the location of the beds is not always even and there are uneven lines when planting. In this case, the probability of crop damage is high. Single-row hillers for the Neva walk-behind tractor are much easier to manage than double-row ones.

Therefore, CJSC VRMZ offers its customers a wide range of single-row hillers. Various configurations and sizes. In total there are more than 15 various models and configuration.

Here are their average stats:

Dimensions - 46 cm long, 21 cm wide and 65 cm high. The average weight of the structure is 5 kg.
The depth of hilling can reach 15 cm.
And the grip width of the hiller is from 21 to 36 cm.

How to use correctly?

To connect it to the walk-behind tractor, a special hitch is used.

After coupling, special bolts should be used to adjust the working depth and the width of the hiller. To do this, it is necessary to take into account the characteristics of the soil that is planned to be processed.

Hilling depth is adjustable by changing the angle of inclination of the body itself.

If necessary, the angle of inclination can be easily adjusted already during agricultural work.

Here is a video about how a single-row hiller is operated there:

Disk single row

This type is a construction of a rack, disk and shaft. The drain is attached to a special bracket with a bracket. This bracket allows you to adjust the location of the rack in any direction. The shaft is equipped with a sector, it allows you to adjust the angle of the disk. The discs are mounted on a shaft, which is driven by plain bearings.

CJSC VRMZ offers the following characteristics:

Weight can be from 5 to 10 kg.
The length of the hiller ranges from 24 to 27 cm.
The width can be adjusted from 33 to 66 cm.
The height is set in the range from 54 to 70 cm.
The maximum height of the comb can reach 20 cm.
The angle of inclination of the discs is adjustable from 27° to 35°.

CJSC VRMZ does not offer its customers to use what they have. They offer their customers a wide range of mounted hiller settings. So that you can adjust its work for beds of a specific size.

Setup and operation

First, he mates with a walk-behind tractor. Then the distance between the bodies of the hiller and their width are adjusted.

The width can be adjusted by spreading or narrowing the wings.

And the working width is controlled by loosening the bolts and rearranging the body of the hillers. After installation at the required distance, securely fasten them back.

IMPORTANT! After adjustment, the housings must be at a symmetrical distance from the axis. Otherwise, the walk-behind tractor will constantly lead in one direction and work will be impossible.

Before use, it is initially necessary to hitch the hiller with a walk-behind tractor.

Then adjust the angle of inclination and the distance between the discs to obtain a comb of the required height. To do this, use special bolts according to the manufacturer's instructions.

The discs go deep into the ground by pressing the handle of the walk-behind tractor while it is moving.

If necessary, it is possible to adjust the angle of inclination and discs and the distance between them right during the work.

Here is a detailed video review of the disk hiller for the Neva walk-behind tractor and an example of its work:

Homemade options

Motoblock Neva is compatible with any attachments. All that is needed is to make it hitch with the body of the equipment.

The hiller is a relatively simple design that many people can build at home.

The easiest type of hiller to assemble at home is disk. All they need is:

T frame,
2 disks
2 racks for them.

For the manufacture of discs, any steel with a thickness of 2 mm or more is suitable. But they will need to be given a convex shape.

Holes are made on the frame, which will be necessary to change the distance between the disc racks. They are attached to the frame with special bolts.

Here is a detailed video instruction that will help you figure out how to make a do-it-yourself hiller for the Neva walk-behind tractor: