Clothes rack...when there is no closet. Wall hanger in the hallway for clothes. Ideas on how to make your own wooden sliding clothes rack

How to make a wooden hanger with your own hands? It's very simple, we'll show you how. It would seem, what is a hanger in the house? Almost no one notices it, although it is quite a weighty and functional item. You will be surprised how you can improve it, and even make it yourself. Special skills are not required there, so anyone can do it.

Materials for work: what kind of wood to make a hanger

Depending on the type of hanger, we may need different materials for work. There is a general handy list that will be useful enough for any of the jobs in this category.
The arsenal of tools looks something like this:

• The material from which the hanger is made.
• Self-tapping screws.
• Screwdriver.
• Saw grinder, with which you can cut the desired parts of the hanger.
• Dowels, if the structure is wall-mounted.
• Screwdriver or drill (best electric).
• Level, tape measure, pencil.
• Sandpaper for surface cleaning.
• Hooks.

Do-it-yourself outdoor wooden hanger

Wooden things have always been of high quality and durable, as well as useful in everyday life. This also applies to hangers, so we will now try to build a wooden floor hanger with our own hands.
This work will not take us much time. It will take approximately 20 free minutes, as well as all the necessary materials.

To create a wooden floor hanger, we need:

• Six knees (copper).
• Four tees (copper).
• Four plugs (must be the same inlet diameter).
• Wooden round stick of the same diameter. The total length should be 5.3 meters, cut into pieces: 2 pieces of 125 cm, two more of 70 cm, 4 parts of 20 cm, and the last 6 pieces of 10 centimeters each.

The workflow is very simple. Following the drawing plan, we must assemble all the structural elements. To facilitate the task, they are marked in the figure with letters.

• "A" - 125cm.
• "B" - 70cm.
• "C" - 20cm.
• "D" - 10 cm.

To further secure our floor hanger, use wood glue. Copper inserts will look interesting, which, on the one hand, will attract attention, and on the other hand, will be quite strong in operation.

DIY wooden hanger

An integral part of any corridor, as well as an item that is simply necessary in every apartment.

You can build a wall hanger yourself using all the necessary tools. The material option can be different, wood is the best of course. In the "cheaper" option, you can use chipboard.

Among the tools that we will definitely need are:

• Screwdriver or screwdriver.
• Drill.
• Drill set.
• Roulette with a pencil.
• Hooks.

It is done very simply - just measure the desired distance and drill hooks to the board, and then hang the finished hanger on the wall. But there are more interesting options for such crafts.

Wall hanger made of hammers

In this craft, we will need everything the same as in the previous version, only instead of hooks we will use old hammers, from which we will need to cut off the handle, leaving a short end, which we will attach to the board.

Working process:

The approximate period of time for which it is realistic to make a wall hanger is about 2-3 hours (this is together with a shelf).

Extraordinary ideas for a wooden hanger

Floor and wall hangers are considered classics, but when you're in the mood for something out of the ordinary or creative, you can consider the following designs.

Master class "Hanger made of real wood"

The word "wood" means not just a wooden material (board), but pieces of real natural wood. Oak chocks are best suited for this work, perhaps even with knots that will serve perfectly instead of banal hooks.

Working process:

The hanger will undoubtedly attract attention, as well as brighten up the boring atmosphere of the room. Most often, this option is placed in a country house or in the country, less often in apartments or mansions.

Photo of wooden hangers in the interior

As you can see, you can make a wooden wall or floor hanger - for clothes or jewelry, for children and adults, for a dressing room or for a hallway. It could be both a classic and some kind of unusual wooden hanger - from skis, hammers, old things, a fence or doors, from pallets, and so on. The main thing is to connect your imagination, and for inspiration, I suggest looking at photos of various wooden hangers which you can do by hand.

We can conclude that there are a lot of options for hangers, as well as ideas for their implementation, and each of them is unique in its own way. Therefore, choose which of the ideas is best suited to your home and start making your own masterpiece. Drawings and improvised materials will help you with this. The main thing is to have an original idea and the mood to embody it.

One of the convenient ways to store clothes is a floor hanger. You can put it at the entrance and leave outerwear here. Other models are more suitable for bedrooms, dressing rooms, children's rooms.

Types of floor hangers and their location

Some types of floor hangers are placed in certain rooms. For example, hangers for outerwear are placed in the hallway near the door. This is convenient: you can immediately get rid of clothes. The floor hanger-rack for hangers is more versatile. Such products can be placed in the corridor, in the dressing room, even in the nursery or bedroom. They accommodate a large number of clothes and they can replace a wardrobe.

Standing hangers for suits, shirts and trousers are most often “registered” in bedrooms or nurseries (if the child is a schoolboy). This is where we usually dress before leaving the house. Hangers and chairs are also placed there. This is, in fact, one of the options for suit hangers. Just the legs and stops took the shape of the seat.

What materials are they made from

Floor hangers are most often made of metal or wood. Both of these materials are strong, ductile, durable and relatively inexpensive. Some parts - plugs, parts of hooks - can be made of plastic.

Most often you can see floor hangers made of metal and wood.

Plastic inserts are more common on lower cost metal hangers. If not elements of the supporting structure are made of plastic, this is not bad and you can buy such floor hangers without hesitation. If the elements of the supporting structure are made of plastic, it is better to look for another model.

Metal hangers

Most big choice metal floor hangers. They are usually made from thin-walled round or square tubes. The metal used is most often black, covered with a protective coating. It can be paint (most often - powder coating), nickel plating, chrome plating. AT last years a new protective coating appeared - a film made of plastic (PVA). This is also a good option, since the film is impervious to moisture and air. It is easy to care for such products, as the surface is smooth, without pores.

If the floor hanger will serve to accommodate heavy winter clothes, pay attention to the thickness of the metal when choosing. The minimum in this case is 1 mm. If the pipe wall thickness is not indicated in the product description, the wall is most likely very thin and suitable for light clothing. Indirect signs that will confirm your guesses are the weight of the product and the price.

Wooden

Wooden hangers can be carved from solid wood, or can be prefabricated. The first option is much more expensive. Teams are 2-3 times cheaper, but they do not differ too much in appearance. The presence of joints in products of normal quality is hardly noticeable, so that when limited budget it is quite possible to purchase economy class products.

Wooden floor hangers are well polished, coated with a protective coating. Usually varnish or oil is used. The varnish creates a protective film on the surface, so it is easy to care for such products. Wood oils protective film do not create, but protect no worse. When processed with oil, the structure of the wood is clearly visible - all the fibers, the pattern.

Standing clothes hangers in the hallway

Floor hangers for outerwear in the hallway most often represent a rod, on which hooks for clothes of different lengths and shapes are planted around at different heights. For stability, the design is equipped with a round (rarely square) weighted base. They can be made from wood or metal.

The height of the floor rack is 150 cm and above, and the base is a circle with a diameter of 35-45 cm. In order for the hanger to be stable, you need to pay attention to the fact that the lower part is weighted. And anyway, such designs require careful attention: you need to hang clothes evenly. Otherwise, the hanger may fall.

There are floor hangers for outerwear of this type, but made differently. Several pipes or metal strips are bent with a certain radius. In this case, the upper part is smaller than the lower one. This design is more stable, but requires more space, which is not always possible in a small hallway.

Clothes hanger racks

Hanger-rack for clothes on hangers - handy thing if there is not enough space in the cabinets. They consist of a rectangular base, one or two cross-tubes, on which hangers with clothes are hung.

Hangers-racks are made of metal and wood. There are metal pipes, there are forged ones. Some models of metal racks for clothes have adjustable height. For long clothes, their rack can be raised higher. The maximum height is 150 cm. For short clothes, you can put it at a height of 80-90 cm. This is the minimum height, but there are also intermediate positions.

In some cases, a floor hanger on wheels is useful. It is easy to move from place to place without removing hung clothes. There are children's models of floor hangers of this type. They differ only in height and more "cheerful" colors. Even children's floor hangers can be made of plastic. Children's clothing does not weigh that much, so the strength of the plastic is more than enough. And for the price, plastic floor hangers are the most inexpensive.

Folding models - an outlet in case of receiving guests

For those who receive guests in in large numbers it can be problematic to place their outerwear. For such cases, there is a folding rack for coat hangers for outerwear. When folded, it takes up very little space and can be stored in a pantry.

Floor suit hanger

The problem of storing a business suit is easily solved with the purchase of a special floor hanger. It is somewhat similar to racks, only with special hangers for a jacket and a crossbar for trousers.

There are stands for a suit made of wood, metal and plastic. plastic in this case not bad: a large load is not expected, so the strength of modern plastics is more than enough.

If we talk about useful options, this is a shelf or a box. It is convenient to store business trifles in it: glasses, cufflinks, wallet, car keys, etc.

They put floor hangers for a suit, usually in the bedroom, in dressing room. It may be convenient to have such a device in the office. There are different models, you can choose for any style of interior. And some options look like a designer decoration themselves.

Hanger-chair and hanger-bedside table

There are quite unusual models of hangers. They are combined with pieces of furniture. For example, there is a chair hanger. The models are different: with a hanger for a suit, just a bar for hangers or with a rack for outerwear. For small apartments, this is a very good option. It takes up as much space as a regular chair or bench, and also serves to store clothes.

Floor hanger with chair and bedside table - for full use of the hallway space

Another option: a nightstand with a hanger. The lower part of such a floor hanger is much heavier than its upper half, so it will not tip over from a couple of coats. The second plus of such furniture is the optimal use of space. The trouble with all floor hangers is that the lower 50-60 cm remain unused. In the case of a coat rack, this is not the case. It's another one good way rational use of space for small hallways.

Agree, hooks and hangers are an indispensable thing in everyday life. Without them, one could only dream of order in the house. If you are now thinking about how to drive a nail into the wall so that things are not scattered anywhere, for you our review of what people thought of when inventing ... a hanger.

As they say, everything is useful in the economy. What could be easier than hangers from already unnecessary things? For example, original hooks are obtained from old forks. Of course, antique silver ones with a pattern are preferable, as they look more spectacular than aluminum ones from Soviet canteens.

You can make a kitchen towel rack out of knives that have a broken blade but a wooden handle.

Or from old scissors. Although, probably, such an idea is not harmless if there are children in the house.

Old (or new) door handles- also an option for a stylish wall hanger.

Someone made a creative hanger for the kitchen out of wooden rolling pins. Would you like to try again?

Even old skis can be given a second life by "forcing" them to "keep" clothes and bags in the hallway.

A snowboard nailed to the wall and decorated with golden hooks - that's the original hanger for you. Who would have thought that such a simple invention would fit perfectly into the interior of a modern apartment?

And here the designer's fantasy was based on a clothespin. It turned out a multifunctional piece of furniture - a hook-tuck.

Clothes hooks in the form of a cardiogram will surely please not only doctors.

It is possible that some plumber or housing office worker will be inspired to work water pipes and valves. A hanger in the hallway from a large diameter pipe can also serve as a temporary container for small items - glasses, scarves, gloves, keys, phones.

It’s hard to imagine how this happened, but a manual plumbing tool for cleaning pipes - a plunger, also inspired someone to create a holder for a clothes hanger.

And in an electrician's house, a key holder might look like this.

It will be more interesting for children to hang their clothes not on a boring hook, but on the ears of cats, dogs and donkeys.

Another interesting option a children's hanger can be obtained from a board on which they write with chalk. You just need to nail hooks to the bottom wooden rail.

Outerwear is better, of course, to hide in the closet. However, there is not always a place for him in the hallway. If your home is small, we suggest making a ceiling clothes hanger from an ordinary pipe with your own hands.

It will be interesting to complement the design of the corridor or hallway with another simple in execution, but unusual in shape hanger.

An even simpler, but original thing for storing chains, bracelets and other hanging jewelry would be appropriate in the bedroom near the bed.

Shoe storage traditional ways As a rule, you need to find a lot of space in the apartment. And you try to make a practical and ergonomic shoe rack out of wire yourself.

The original hanger-shelf for can be made from wooden pallets(pallets) intended for the transportation of goods.

AT country house a hanger from an old ladder would be quite appropriate and organic.

Such a device is just a godsend with a lack of space in the home. For a hanger-ladder, both twigs and trimmings of a plastic pipe of small diameter are suitable.

Retro style in country houses Europe and USA in recent times becomes very popular. The interiors use authentic items of the 50s and 60s of the last century or stylized for that time.

For example, practical option for the hallway there may be a hanger with a shelf for wicker baskets, which was common among Americans in the last century in coastal vacation houses. By the way, such a thing is not difficult to make yourself, and baskets can be bought in a store or also made by hand. We assure you that the effect of putting things in order in the house will be significant.

In the skillful hands of the master, a metal rod twisted in a spiral can also become a hanger.

Another option for men who know how to hold tools in their hands. Functional hanger, consisting of wooden board with holes and dowels that can be interchanged at your discretion.

Hanger from hangers. To some, these figures may seem like hunting trophies. This is not so important, the main thing is that it is convenient to hang and cling to them not only clothes.

For those who do not want to part with the childhood habit of hanging clothes on the back of a chair, designers have come up with such a compromise.

Collars can also be turned into hooks. On such a hanger it is convenient to leave hats or outerwear.

The intricate design of this natural wood hanger will appeal to lovers of everything original.

About others interesting ideas Read on for our review. Many different ones are in the corresponding FORUMHOUSE section. And for home craftsmen, a video about arranging a room for working and storing tools will be useful -

Click Class

Tell VK

A wall hanger in the hallway is an important element of storage. The layouts of many apartments have narrow corridors in which it is not always possible to place a full-fledged closet, so the owners are looking for alternative options. I want to keep the design of the apartment, comfort and ease of use.
There can be a lot of variations of hangers from the most standard and simple miniature shelves to futuristic and most unthinkable ideas.

The most popular materials for making hangers are wood and metal.

Forged metal hangers amaze with their beauty and smoothness of forms. They are used in Provence and Art Deco interiors. This version of the hangers is mounted on self-tapping screws, and more often hung on them.

This option of hangers can be attributed to horizontal. Their function is only to store outerwear. Metal hangers often have an aged look, which gives them a picturesque look.

A very interesting option is the combination of forged elements and leatherette or fabric. Looks unusual and luxurious. Such a hanger will decorate any corridor and become its highlight.

The photo shows combinations of materials: wood with fabric and metal with fabric. The functionality and originality of products is preserved. In the first version, the wood gives an array and solidity to the furniture, and in the second, metal facilitates the composition and gives grace.

Hangers made of wood can be combined with a mirror, a shelf for shoes or for head appliances. The photo shows a very compact version of the hallway.

The hanger can have sections: for short and long top things, which helps prevent dirt on the wall.

Hanger made of wood is understaffed with a shelf and a mirror, also great option for small hallways.

When choosing a material, it is necessary to focus on its strength, whether the finished product will withstand heavy winter things.

For this function, you can strengthen the mount: use not only self-tapping screws, but also furniture corners.

Materials can complement each other, carrying their functions. Metal, as more durable, goes to the basis of the structure, and wood as decorative elements.

Ideas for hangers in the hallway from improvised materials

I picked up a lot of ideas when the hanger was made with soul from improvised materials. This can serve as inspiration for many families. I think that in the interior it is necessary to move away from stereotypes, because any design is unique with its non-standard solutions.

In the photo, a completely ordinary hanger from a piece of board is made in nautical style. The matching backdrop and anchor hooks add color to the entire hallway.

An interesting forged lightweight option, perhaps not entirely from improvised materials, but it has a place to be. A very functional and elegant option, it contains a stand for shoes and hats.

Connected in the form of rhombuses, slats with wooden hooks, it looks very eco-friendly and stylish. Placing the hooks at different heights allows you to hang a lot of things without creating an untidy pile.

Curved leaves made of thin aluminum decorate the walls in a peculiar way. And it will be very easy to make such a hanger at home. To do this, you can buy a sheet of thin aluminum in hardware stores. This material is easy to cut and quite malleable.

Pallet hanger - the most affordable and modern version hallway decor. Creates a loft atmosphere and is suitable for non-standard young people.

And, most importantly, it is completely environmentally friendly and strong material. With the help of corners and self-tapping screws, you can build both a shoe rack and a shelf. You can simply coat the pallets with varnish or stain, then a beautiful wood pattern will remain, or you can paint over with thick colored paint to match the overall tone of the interior.

For minimalistic designs, the hanger in the photo is just a godsend. Comfortable, without unnecessary details and looks very stylish. A rod is inserted inside, which allows you to make hangers out of the hanger.

I will give a small master class on making hangers from wooden coat hangers. It turns out two rows of hooks. The option is unusual, but very functional.

Having slats of different widths, you can create the simplest option furniture by simply drilling hooks and adding crossbars for fastening.

For nature lovers, you can use images of animals and birds, and artificially aged wooden product will give the corridor history.

An interesting combination of two materials: wood and metal. Modern compact hanger with built-in hooks.

Many times I have come across the ideas of cutlery hooks: forks and spoons, as in the bottom photo.

An interesting option for a plastic hanger for a small family. AT summer period can only serve as decoration.

DIY wooden wall hanger

To make a hanger, you need to take a few boards, either ready-made or bought in a store. You can use any wood: pine, oak, birch.

We will analyze two options for hangers.

We cut out the same sidewalls, the top and the middle crossbar, to which you then need to attach the hooks.

We cut out beautiful bends on the sides and skin all the details.

We connect into a finished structure with self-tapping screws, furniture corners.

We mark places for hooks and drill them.

We check the finished product for strength and varnish it.

You can make an even simpler version of the clothes hanger.

The photo shows the diagram and dimensions of the future product.

We take purchased boards or lamellas, in this case pine wood was used.

We measure the same distance between the vertical parts and fasten the frame from the wrong side. We drill any fasteners. The shelf will be hung on self-tapping screws.

We attach hooks to the front side at the same distance from each other. And we admire the result.

This hanger model can be supplemented with a shelf, to give contrasting colors. The photo shows an option when the crossbars do not go from the wrong side, but from the front.

Tell VK

According to the great director, the theater begins with a hanger. But is it just theater?

It is difficult to imagine any house - whether it is a cozy apartment or a spacious cottage - without this integral attribute of our life.

Hanger-rack on the floor, hooks on the wall in the hallway, coat hangers in the closet… They have one role: to keep our belongings in a tidy condition.

However, people with a rich imagination are able to turn this boring piece of furniture almost into a work of art. A simple set of tools for work, patience and a couple of non-standard ideas - and you are the owner of a unique thing.

Hanger as part of the interior

The main thing in any home is a spacious closet. Blouses and dresses, trousers and skirts, gloves and scarves, coats and raincoats coexist in it.

A good hostess has every thing in its place. The clothes in the closet are different. And hangers for her, too, should be different.

How to make a hanger with your own hands? Believe me, it's easy and even fun. Dig into a chest full of long-forgotten grandma's dresses. You will find amazing things there.

Antique hangers (so-called trempels) can be restored, and they will turn into the main decoration of your wardrobe.

In the old days, clothes hangers were made of wood. Using one of the decor techniques, you can give an old thing new life. And what a life… You will want to hang such beauty on the wall, and not in the closet – and let everyone admire it.

You can transform a clothes hanger with the help of decoupage, unusual coloring or appliqué.

The soft shoulder pads are very comfortable to use. Things on them keep their shape and do not slip off. You need to wrap ordinary trempels with thin foam rubber, and then sheathe them with a pretty fabric. Beads and ribbons will give the new little thing a special charm.

But to decorate your house with a wooden hanger own production more difficult. Woodwork requires special skill. And special tools are needed here.

Wooden wall hanger

Wall hanger - the design is simple. However, its manufacture should be approached with all seriousness - then it will serve you for a long time.

The main guarantee of success is strong, dry wood without cracks. A piece of timber or a board is perfect. The length of the workpiece depends on the length of the future hanger. Before starting work, it would be nice to treat the wood with an antiseptic.

Panel mounts are placed on the board in one, two or three rows as desired.

Such a hanger is the place behind the door in the bedroom, as well as in the bathroom, pantry or bath.

Accuracy is brought up from childhood. Furnish your child's room with a simple hanger. And if it is decorated with images of favorite cartoon characters, the child will be happy to look after his clothes.

Note!

Do not mount the hanger directly on a plastered wall. Otherwise, you risk "whitewashing" your clothes. Yes, and a jacket or raincoat, soaked in the rain, will leave ugly spots on the surface of the wall. To avoid this, you need to attach a sheet of plywood, thick paper or polyethylene under the hanger.

Panels for hooks can be given any shape - waves, ovals, hearts, suns, etc.

Attention! The use of untreated wood is fraught with a large number of splinters. Don't forget to polish the hanger panel.

As fasteners, use empty spools of thread or ready-made hooks of any shape.
And if you turn on creativity, dried twigs or plant roots will be used. Cut them, remove the bark, sand, varnish - here you have the hooks. You won't find these in the store for sure.

A simple wall hanger can be made from ordinary wooden planks. Nail them to the wall in parallel - this is the basis for fastenings, and the protection of clothes from whitewashing, and interior decoration.

Note!

Of course, you can’t make such a hanger in half an hour. But the end result of your labors will be a real hanger. It remains only to attach a shelf for storing hats at the top.

Do-it-yourself hanger in the hallway

A good hallway hanger should be durable, beautiful, and at the same time as roomy as possible. In the limited space of the hallway, outerwear, shoes and numerous accessories should fit.

This should not be forgotten when designing a hanger. There should be enough compartments and shelves at the hanger in the hallway to accommodate everything you need.

Attention! When marking out, consider the dimensions of the wall on which you will place the hanger.

For a standard apartment, a hanger of this size is quite suitable: the width is about 1 meter, the height is slightly more than head level. Fasteners for clothes are placed on the panel in 2-3 rows.

Note!

At the top of the hanger you need a shelf for hats. Structural strength will give straps.

They are attached to the sides of the structure, connecting the shelf to the panel at an angle of 45 degrees. It is best to fix the hanger on the wall with dowels.

Do-it-yourself wardrobe hanger

Making a hanger with your own hands is very simple. There are many ways to make such hangers. You will need: coarse wire, a cut of a branch of a suitable shape, small plastic bottles put on a wire base, a metal bar or plate bent at the right angle.

Wrap the base of the coat hanger with thin foam or similar material. Then choose a fabric that matches the color and sheathe the base. Add charm to the resulting cute little thing with ribbons, beads or lace.

If the hanger is designed for a baby, decorate it with a funny muzzle or appliqué. Pick up a hook - and hang in the closet.

Floor hanger rack

You can solve the problem of placing clothes in spacious rooms with the help of floor hangers-racks. Floor hangers are commonly used in the reception areas of various institutions.

These interior items are made of metal pipes. A floor hanger is a universal thing. You can place almost anything on it. Except, of course, shoes.

The disadvantage of a pipe hanger is its instability. If things are not evenly placed on it, it may fall.

But the floor hanger can always be rearranged to the right place or even hidden in the pantry.

In residential areas, this type of hanger is rarely used: it takes up a lot of space and is dangerous for children. Nevertheless, it is quite possible to make a floor hanger-rack yourself. The material is usually used:

• for support - artificial spruce cross, couplings plastic pipes, rotary mechanism a broken swivel chair;
• for a rack - trimming plastic or metal pipes, a small tree trunk, a shovel handle, a camera tripod, a “leg” of a floor lamp and other suitable details.

Attention! The main thing in floor hanger- its sustainability.

Unusual homemade hangers

The hanger can be made from absolutely any material or object. Sounds incredible? Don't believe?

See for yourself:

• Pieces of steel wire, tube or angle are great for the job. Welding can be used to connect parts. And if the metal is flexible and soft enough, just bend it with your hands. The choice of form is up to you.
• The design of plastic pipes will appeal to fans of high-tech style.
• If you love working with wood, this idea is for you. From the remains of wood of any thickness, you can make a practical and multifunctional hanger for the hallway.
• The simplest hanger can be twisted from wire. Attach clips to the edges of the resulting hanger - now you have a handy little thing for placing skirts and trousers. Experiment with the shape of the hanger - this can be the highlight of your product.
• The idea of ​​a “hunting” life is the good old deer or elk antlers. Attached to a suitable base, can become a wall or floor hanger.
• It's no secret that many of us (especially men) prefer an ordinary chair to a spacious closet.

Often shirts, jackets and even trousers are hung on the back of a chair. Why not turn the back of the chair into an original hanger for those same shirts and jackets? On this design, the entire suit will easily fit.

Homemade hangers in the form of rings are quite suitable for storing belts, belts, ties.

Hanger as home decoration

Before you start making or decorating hangers, think about what style prevails in the interior of your room or hallway. After all, a new thing should fit perfectly into an existing interior. Here are some examples:

• Soft trempels, covered with linen or knitted fabric in bright colors, will perfectly fit into the decor of a country-style bedroom.
• Bright hangers with a "doll" design are suitable for a teenage girl's room in the style of Barbie.
• Luxurious, with twisted elements, the hanger will decorate the boudoir in oriental or palace style.
• A wooden hanger with carved patterns will emphasize the strict style of a study or hallway in a classic style.
• Antique, artificially aged or skillfully restored coat hangers will add a special charm to a retro-style room.
• In the bedroom of a glamorous lady, a hanger decorated with rhinestones, beads, bows and other shiny little things will look harmonious.
• structures made of metal or plastic parts, simple and unpretentious in form will decorate the room in techno or high-tech style.
• Simple in form, concise in design, hangers will complement the interior of a minimalist.

DIY hanger photo