home Construction

How to glue vinyl wallpaper on non-woven. How to glue non-woven wallpaper: tools, glue, wall preparation, step-by-step master class. Pasting non-woven wallpaper

Non-woven wallpaper is a good choice for wall decoration When planning to start redecorating your own home, first of all, you need to decide what kind of wall decoration will be. Usually 2 options are used - painting the walls, or wallpapering. But what if you want to stick wallpaper, but there is no way to find the right color? In this case, non-woven fabrics will be an ideal option, they can be painted in any suitable color. What kind of non-woven fabrics, and how to apply glue - read on.

Types of non-woven wallpaper

Currently, Russian and foreign (reviews do not differ much) non-woven wallpaper is often used by designers in interior decoration. This is not surprising, because such wallpapers are environmentally friendly, do not shine through, are easy to paste, durable and breathable. Unlike wallpaper on a paper or vinyl basis, "non-woven fabrics" can be painted with special paint several times.

This is beneficial, since by gluing such a canvas, if possible, you can change the interior without spending much physical effort and financial costs.

Non-woven wallpaper is attractive because it can be painted several times.

Wallpapers are popular due to the properties of the material from which they are made. The composition of non-woven fabric includes pressed pieces of cellulose, thanks to which non-woven wallpaper retains its strength and is resistant to deformation.

Wallpapers are divided into 3 types:

Smooth. Most often used for painting.
Embossed. Used for painting. Thanks to the vinyl coating and the textured outer layer, sufficient coating defects are remarkably masked, and the canvas can be repeatedly repainted.
Structural. Usually covered with vinyl. In the production of such wallpapers, foamed vinyl is applied to the non-woven base, with the help of which various original ornaments are created.

On the modern market with varying success, vinyl on hot stamping non-woven is in the lead. Why do they attract the attention of people planning renovations? Such wallpapers, first of all, attract attention with a variety of colors and ornaments. Hot stamping wallpapers retain heat well, hide sufficient damage to the walls, and if necessary, they can be washed with a sponge using ordinary detergents.

Proper gluing of non-woven wallpaper

As you know, ideal materials do not exist, as a result, hot stamping canvases also have drawbacks - vinyl has absolutely no ability to pass air, so the room pasted over with such wallpaper must be often ventilated.

When choosing wallpaper, you should pay attention to the markings.

Marking helps to find out the following wallpaper parameters:

Wallpaper base.
Moisture resistance.
Light resistance. To avoid wallpaper fading, you need to look at the signs that say how resistant they are to direct sunlight.
The direction of the drawing. The signs indicate how to correctly position the pattern for the pattern offset, and also inform you whether the pattern needs to be adjusted at all.
Alignment of canvases. The symbols indicate how the pattern is to be fitted - overlapping or changing direction.
Wallpapering method.
Glue application method.
How to remove wallpaper from walls.

In order not to make a mistake when buying wallpaper, you should know the decoding of special characters, otherwise, as a result of pasting the walls, you risk getting a displaced pattern and other troubles that require additional costs and redoing all the work.

Although non-woven wallpaper is waterproof, it does have its limitations. Not everyone will withstand intense sponge rubbing, so to avoid stains from detergents or any other troubles, you should look at the signs informing about moisture resistance.

It is worth noting that any wallpaper has a water-repellent layer, so they can be washed.

Some experts recommend sticking stripes of wallpaper not as standard vertically, but horizontally. This method of gluing gives the walls original look and hides seams. The method is quite complicated, so if you decide to glue the wallpaper in this way, you should find a partner for work.

Deciding which adhesive is best for non-woven wallpaper

For gluing to the wall reliably and efficiently, you need to choose the right wallpaper glue. It is necessary to buy the glue that is made specifically for the existing type of wallpaper. Currently, there are many brands - manufacturers of glue for non-woven wallpaper.

Of great importance when pasting wallpaper is the quality of the glue

Here are some of the foreign ones:

Metylan- the most demanded in the market and universal glue for non-woven fabrics. In the preparation of this glue, German technology is used. The glue is applied only to the wall, it is well compatible with cement and lime. Buyers note the full compliance with the amount of consumption indicated on the package and high quality glue.
Quelyd- this glue is quite expensive, but it is justified, since the glue has many positive reviews. Glue is applied to the wall, it is not necessary to spread it on the wallpaper. Another advantage is the lack of bad smell and quick drying of the surface.
Kleo- glue of excellent quality, quickly prepared, non-toxic, contains antifungal components. Also, the advantage of this glue is that it can be stored for a long time in finished form. Wallpaper, when using this product, can be painted already 1.9 hours after gluing.
Axton- glue of French production. This adhesive is universal and suitable for interior decoration with other types of wallpaper. At the glue a large number of positive feedback. This glue has no smell, low price and high quality gluing.

Moment - Russian-made glue. As well as others, it is applied directly to the wall. Contains antifungal additives and after preparation can be stored up to 6-8 days at room temperature. Lakra is another glue made in Russia. Its advantages include a relatively low price and high quality gluing.

Instructions: how to glue non-woven wallpaper correctly

Often, people who start repairs are faced with the question of where to stick wallpaper. It is recommended to start from window frame moving to the far corner of the room. Having prepared the walls, you should prepare all the tools with which wallpaper will be glued.

Cutting off excess wallpaper, you can leave a small indent under the plinth from below

You will need:

Pencil;
Roulette;
Building level;
Ladder;
Rollers for applying glue;
Containers for diluting glue;
Dry towels.

The actions by which the sticker of non-woven wallpaper is carried out are not difficult. Dilute the glue - it is important to remember that when sticking non-woven wallpaper, the glue should be applied directly to the wall. If the glue is applied to the wallpaper before gluing, then after drying, any composition forms gaps between the canvases up to 5 mm wide. Preparing the first sheet is an important step, since the overall result of all work depends on the smooth and accurate gluing of the first sheet.

Cut off excess wallpaper from the bottom - usually the skirting board can hide about 4 cm, so you should not cut too much. In order to maintain an even cutting line, the following technology is used - the excess wallpaper must be cut off by pressing the wallpaper against the wall with a spatula. In this case, the knife does not come off the cutting line, but only the spatula moves. Removing Excess Adhesive - Remove excess adhesive from the surface by wiping it with a damp cloth or sponge.

Do not be afraid of getting water on the wallpaper, while it is important that the glue does not get on the wallpaper, otherwise the surface will be damaged.

As a rule, coming to the store, people choose wallpaper that suits them in terms of price and pattern. Few know that there is useful thing like marking. A marking sheet is attached to each roll of wallpaper and contains signs, which in turn contain a huge amount of information.

Tips: how to stick wallpaper on non-woven base

It is well known that wallpaper does not adhere well to smooth surfaces. And if the walls are also painted, it will be necessary to clean the walls of paint before gluing.

Before pasting wallpaper, the wall must be prepared

The walls must be processed so that they are completely absent:

Irregularities;
cracks;
Drops.

Usually, in places of such flaws, the wallpaper bubbles and peels off. Next, the walls need to be primed. Also, if there are grease stains on the walls, they must be eliminated. Next is the gluing of the canvas. The next sheet is glued end-to-end with the previous sheet. It is necessary to ensure that all corners and the pattern of the canvases match.

The joints should be ironed with a roller.

Excess wallpaper and glue are also removed. Similar actions are performed with subsequent sheets. Wallpaper painting - it is recommended to paint it 2 days after the sticker. They paint such wallpapers with paints specially designed for this.

According to technology, how long non-woven wallpaper dries

Drying of non-woven wallpaper is an important issue, since the quality of the wall covering depends on it. After gluing the wallpaper in the room, any other actions that contribute to the movement of air are prohibited. Also, the room cannot be ventilated.

Wallpaper dries for at least a day at a positive temperature from 17 to 30 ᵒС. If the room temperature is lower, then the wallpaper dries for a longer time.

Coloring of non-woven wallpaper should be done only after they have completely dried.

Only completely dry wallpaper can be painted. If you paint not completely dried wallpaper, there is a high probability that they will peel off the wall. If you want to create the most comfortable atmosphere in the room, textile fabrics on non-woven fabric will be an ideal assistant in this situation.

Where to begin?

Before proceeding to pasting walls, it is worth studying non-woven wallpaper, their pros and cons, and also features of working with such a finish. AT professionals are well versed in this, and If you want to entrust the work to knowledgeable people, you can contact yaremont.ru - they do apartment renovations without prepayment.

Tapestry on non-woven is a roll finishing material made of cellulose fibers with polymer impregnation. On the market, you can find both pure non-woven products and non-woven wallpaper with a vinyl-coated front layer.

According to the structure of the front layer, smooth and textured tapestries are distinguished. By color - colored and intended for painting (white). The instruction on the roll contains information about the material (width, texture, the need to join the pattern), so you should carefully study it before buying.

Non-woven wallpaper has both pros and cons. Key advantages:

Density and strength.
Permeability to air and water vapor: walls can "breathe".
Good moisture resistance, easy care.
Easy disassembly: vinyl peels off non-woven backing
One-time finishing treatment. The adhesive is applied only to the wall, and the roll itself does not need to be processed.

Minuses:

High price.
The need for regular cleaning of dust with a vacuum cleaner or a damp sponge.
The vulnerability of the textured vinyl layer to mechanical damage.

If the listed shortcomings did not frighten you, and you opted for this material, it is worthwhile to figure out in detail how to properly glue non-woven wallpaper.

What glue to choose?

The result of the work directly depends on the correct selection of glue. Non-woven wallpaper is demanding on the quality of adhesives, so you should not save on the purchase.

To work with this material, it is better to purchase special adhesive mixtures based on dry modified starches. Glue is prepared immediately before finishing. The soaked composition must be thoroughly mixed. The more homogeneous the glue, the better.

Basic requirements for glue for non-woven wallpaper:

Good adhesion to both the base and the wallpaper itself.
Dense texture that facilitates application in a uniform thin layer.
Lack of own color (does not turn yellow when dried).
Lack of reaction with pigments (for those intended for painting).

There are many specialized brands on the market today. But if you want to guarantee the result, then for work it is worth purchasing one of the proven options:

Metylan "Flizelin ultra premium" - in addition to starch contains polymer components. Well glued to any surface, incl. drywall without putty and cork. Requires a more liquid dilution than indicated in the instructions, otherwise it will dry out quickly.
Quelyd "Special interlining" - notable for antifungal and antibacterial additives that protect walls from mold under the wallpaper. In the liquid state, it glides well, and this helps to join the canvases when fitting. Suitable for gluing dense tapestries for painting.
KLEO Extra Non-woven - also contains antifungal additives. It can be used both for standard tapestries and for non-woven materials for painting. It is undesirable to use for white wallpaper: sometimes the glue reacts with the surface and contrasting yellow spots appear on the finish.
PUFAS is a line of adhesives that includes formulations for working with non-woven materials. "EURO 3000 Non-woven Special" is the easiest to use and the leader in adhesion quality. If you are gluing wallpaper for the first time, then in order not to miss sections of the wall when spreading, you can take a material with a color indication.

There are other good brands as well. But to guarantee the result, it is better to take a proven glue.

Wall preparation

The next factor on which the quality of the finish depends is the preparation of the walls. Flizelin is well glued to concrete, plaster, putty, drywall, wood boards (plywood, OSB) and other materials.

Optimal wall preparation algorithm:

Surfaces are cleaned of old finishes: wallpaper, decorative plaster, paints, etc. If a old paint holds tightly, it must be sanded with a medium-grained abrasive and dusted.
The surface plane is controlled by the rule. If there are differences of more than 10 mm per 2 m, bulges and depressions of more than 5 mm, alignment will have to be carried out. The walls are leveled with putty and polished with sandpaper.
After leveling, a primer is applied. Penetrating acrylic primer will not only strengthen the base, but also reduce its moisture capacity: water from the glue will leave more slowly, and non-woven wallpaper will hold on stronger. You need to prime in two steps, taking a break between sets of 3-4 hours. Instead of a penetrating primer, you can use liquid diluted wallpaper paste.
Immediately before gluing, markings are applied to the walls. A starting vertical line is drawn at a distance of 1 meter from the corner (controlled by the level). Segments equal to the width of the roll (standard - 1.06 m) are laid off from the starting line, and vertical lines are drawn for joining the wallpaper.

Pasting non-woven wallpaper

The gluing process itself begins with cutting:

1. Cleanly washed or covered with a plastic film floor, the roll is placed face down. The required length is measured with a tape measure (room height + at least 10-15 mm of stock). The roll is folded along the length and cut along the fold.

When cutting, the curvature of the room is also taken into account.

2. If pattern matching is required, then the next roll is cut off with a margin. Docking is best done before cutting.

3. The adhesive mixture is prepared in advance (so the composition has time to swell). If you are just mastering the technology of working with non-woven wallpaper, prepare the glue in portions. So he will not have time to polymerize with a decrease in adhesion.

4. The finished adhesive mixture is applied to the wall with a roller or brush. The width of the applied strip should be greater than the width of the roll - this will make it easier to fix the edge.

5. A strip of wallpaper, cut to size, is laid on the wall covered with glue and straightened from top to bottom, and its edge is aligned with the markup.

6. The surface of the wallpaper is smoothed to remove bubbles and wrinkles. Excess material from above and below is cut off with a sharp knife (a spatula is used as a guide).

7. The next canvas is glued in a similar way. When gluing, the edges of the canvases and the drawings on them are joined. The joint must be made as tight as possible: after the glue dries, the non-woven fabric does not deform, and cracks do not form.

8. Cloths in the corners are glued with an overlap. After gluing, the excess material is cut off with a sharp knife. To avoid the appearance of a gap, two layers are pressed tightly with a spatula and cut through. After that, the edges are glued and pressed again.

Care of non-woven wallpaper after gluing is simple: just wipe the joints of the canvases with a damp sponge to seal them and remove excess glue that has come out. Also, the glue must be removed from the ceiling - the sooner this is done, the less risk that stains will remain.

Until the adhesive composition is dry, it is desirable to protect the room from drafts and temperature changes. These effects can lead to peeling of the wallpaper and the formation of bubbles. Painting the walls pasted over with non-woven material can only be done after the glue has completely dried.

We hope that the above instructions helped you understand the technology of gluing non-woven wallpaper. Now is the time to start practicing: follow the recommendations, take your time - and the result will be beyond praise!

Tsugunov Anton Valerievich

Reading time: 5 minutes

Among the many options wall decoration wallpaper is in the lead. They come in a wide variety of styles, textures, designs and colors. Most practical option- non-woven fabrics, with which the gluing process is greatly simplified, small flaws and irregularities of the base surface are hidden. Gluing non-woven wallpaper is not at all difficult, we suggest understanding the intricacies of this process.

Types of non-woven wallpaper

Almost any hardware store can offer a whole range of wallpapers containing interlining:

Fully non-woven. Moisture and fire resistant, poorly flammable, strong, durable, airtight type of canvases. Can be single or multilayer. A common version of non-woven wallpaper, designed for painting after pasting or decoration.
Paper on a non-woven basis. Differ in high air permeability, low price. Thanks to rolling through a press, they have three-dimensional patterns.
Vinyl on non-woven backing. A PVC coating is applied to the substrate, which allows you to create unique textures, an abundance of patterns. The surface can be foamed or hard, which determines the relief and density. Such wallpapers are immune to sunlight, mechanical damage, moisture, but they do not pass air well.
Textile on non-woven base. The role of the top cover is natural linen, cotton, silk. In addition to the original, aesthetically attractive appearance, they provide additional sound insulation, and the joints of the strips are invisible.
Hot stamping wallpaper. A subspecies of vinyl canvases based on non-woven fabric. The use of a special technology allows you to create volumetric patterns that mimic fabric or leather. An example of such a finishing material is in the photo below.

Features of working with non-woven wallpaper

The surface of the walls must be leveled, have a solid color, otherwise it can be spoiled appearance finished finish. By the way, if the wall is a little uneven, thanks to the dense structure of the wallpaper, such a flaw can be hidden.
The adhesive composition is applied only to the surface of the wall. So it is possible to significantly speed up and simplify the work, reduce the consumption of glue.
It is necessary to stick wallpaper strips end-to-end, without overlap. So, it is possible to create a single canvas, on which there will be no bulges and seams. If there is a pattern on the material, it is important to monitor its coincidence.

Due to the fact that non-woven wallpaper rolls are often produced wide (up to 140 cm wide), the number of seams is minimized.

Tools and materials

Before you start the process of pasting wallpaper with a non-woven base, you need to take care of the availability of certain improvised means. For work you need to prepare:

convenient wallpaper spatula for leveling pasted strips;
rubber roller;
several brushes of different sizes for applying glue to the wall;
adhesive composition designed for the selected type of wallpaper;
a container of a suitable volume for diluting glue;
a brush with which wrinkles are smoothed;
construction knife;
clean sponge;
plumb or flat bar;
nozzle-mixer on a drill;
a marker or pencil capable of writing on the surface of the wallpaper;
sharp scissors.

Proper wall preparation

In order for the newly created interior to serve in good faith, a number of preparatory measures must be carried out:

We remove the old finish, clean the wall from dirt and dust. This is especially important if it has a dark color or a bright pattern. Deletion rules different types coatings - in. Methods for removing paint -.
We level the surface of the walls, clean the potholes, chips and cracks with sandpaper. We cover the work surface with putty. When choosing a wide wallpaper fabric, this is done especially carefully, otherwise it will not work to join the strips evenly.
To improve adhesion, prevent the formation of mold, after the putty dries, the walls are covered with a deep penetration primer. To further work You can proceed only after it dries.

The preparation steps are described in detail in, drywall is prepared according to the rules that can be found.

If a we are talking When gluing textile wallpapers, so that the surface does not differ from them in tone, it is recommended to use a waste paper backing. Glue it horizontally so that the joints of the lining are not visible through the wallpaper.

Wall marking and wallpaper preparation

We recommend starting the markup from the most inconspicuous corner. If wallpaper is purchased with a width of 106 cm, measure 104 cm from the corner and draw a vertical line along the marks. It will become a guide for attaching the first of the strips.

On the drawn line, we measure the distance between the ceiling and the floor. Using sharp scissors or a clerical knife, cut off the wallpaper strip of the appropriate length. It is better to immediately perform cutting, given the need to combine the pattern.

Sticking technology

Work is performed in the following sequence:

Lubricate the rectangle marked on the surface of the wall with adhesive. We do it carefully, without omissions. A thicker layer should be applied to the corners.
Glue the first strip. It must be dry. We make sure that its edge clearly coincides with the drawn line. A small overlap is made on the ceiling baguette.

The presence of a gap between the floor surface and the wallpaper is considered non-critical; it will close with a plinth.

Use a clean rag or plastic spatula to press down the wallpaper. Smoothing movements are performed from the center to the edges, starting from the ceiling and gradually moving lower.

Similarly, we glue the remaining strips, focusing on the edges of the previous sheets. By shifting the sheets, we eliminate the cracks and overlays that have appeared. To remove excess glue, use a soft sponge, do not let it harden.

Non-woven wallpaper slides over the glue and does not wrinkle. After applying the canvas to the wall, it can be easily leveled and corrected for at least 10 minutes without compromising the quality of gluing.

Non-woven wallpaper is considered almost the best option for self-finishing walls in any room. They do not deform after gluing, have a thick and stable base, are hygroscopic and practically harmless. But only if all the rules of use are observed, you can count on a long service life.

Coating features

Non-woven wallpaper is always wide (roll width is 106 cm). This means that you will have to make fewer joints, and the more important each connection, because it will be very disappointing to fail the whole thing due to elementary inattention. These wallpapers are heavy and structural, they are distinguished by a dense texture, so they are able to mask defects. various surfaces. Low susceptibility to light avoids fading - the surface does not shed. The internal structure guarantees good breathability, the canvas can absorb a limited amount of moisture without deforming. Vinyl or, moreover, paper solutions do not have such an advantage in principle.

Sticking non-woven wallpaper is also attractive because they:

can be repainted many times without losing its external appeal.
Resistant to mechanical damage and perfectly resist destructive external influences.
They tolerate wet cleaning well.
Practical when performing repair work, they can be glued even in small rooms.
When dismantled, they do not require soaking.

Necessary tools and materials

Before sticking non-woven wallpaper, you need:

remove the old coating (if any);
close the irregularities with putty;
thoroughly prime the walls;
turn off the power supply, remove the outer casings of the sockets.

Important: take care of a high-quality primer, otherwise it will not work to guarantee the adhesion of the wallpaper to the wall.

For work you will need:

roller;
moderately wide brush;
container for glue;
roulette;
stationery sharp knife.

Measurements and fitting are carried out using a level and a long ruler. You will also need a simple pencil, sponge, cotton, water and, of course, the required amount of wallpaper and non-woven glue in the right amount. If a major renovation is planned, and not just wallpapering, be sure to take laser level rather than hydraulic. A five-meter tape measure is better than a three-meter one because it is much more practical. The roller should have a long pile, and it is advisable to buy a plastic spatula with soft edges. It will allow you to roll the wallpaper properly.

The sponge should be taken foam rubber. You will also need a soft brush, with its help you can smooth out the glued wallpaper in case of bumps. A useful accessory is a mesh that simplifies the cleaning of the rollers from excess glue. In addition to a rubber spatula, another one is useful, narrow with a metal blade. It is also necessary to prepare two buckets: one for glue, the other for clean water(better to use plastic ones).

Training

The first step in preparing for gluing non-woven wallpaper is to inspect the surfaces. The easiest way to glue on paper, clean concrete, drywall, chipboard and plaster, but only on condition that these surfaces are perfectly even and in good condition.

Important: the color of the rough surface must be uniform and match the tone of the wallpaper itself, otherwise it will shine through them, which will violate the whole aesthetics. If newspapers are pasted on the wall, they will definitely have to be removed. Any defect is removed, the dirt is cleaned.

Even the paint must be cleaned off, if necessary, fine-tuning the rough layer is done with sandpaper with a medium grain. Then the surface is primed. The quality of non-woven wallpaper allows you to stick them end-to-end, and the connected canvases almost do not allow you to see the seam.

The rules for working with non-woven wallpaper mean that you need to stick them from the corner. From there, a meter is measured along the length, and a line is drawn exactly vertically for orientation. Further, checking the level, such lines are placed on the entire wall. Since the typical roll width is 106 cm, there is an excess of material - this allows you to make the joints at the corners clearer.

Then comes the turn of work with the wallpaper itself. It is best to cut all the workpieces at once.

Important nuance: before “cutting out”, measure the height of the room at different points in increments of 20-30 cm, and if the walls are at least slightly uneven in height, take this into account when cutting.

A large drawing can look very attractive, but it must be selected with great care, not missing a mandatory match in the markup process.

A margin of 10-15 cm in height does not always help with very high ceiling heights, so the length of each workpiece should be made greater than the height of the room. It is best to cut on the floor itself; for this, a plastic film is spread; high-quality linoleum or laminate is enough just to wash and dry. The rolls are rolled out face down, a strip is measured with a margin for fitting and marked with a knife. According to this notch, the canvas is folded in such a way that the ends of the folded fragment and the main panel are on the same line. After making sure of this, you can cut off the wallpaper with a special knife or paper scissors.

After rolling out subsequent sheets, they immediately check how accurately the drawings fit. It is most convenient to control this by paying attention to some well-marked part of the graphics. Only after everything is combined, you need to work on the next blank. Attention: for non-woven wallpaper, only specially designed glue is used, which is poured in a thin stream into a container of water, while stirring constantly. The mixture should settle, then it is stirred again and lumps are selected. This completes the preparation.

Important: it is absolutely impossible to glue new ones on old wallpapers, and it’s not even about the special properties of non-woven fabric. Over many years of operation, the wall covering inevitably absorbs grease and soot, dust and soot, allergens and industrial emissions. Therefore, there is only one correct way - to clean the base to a perfectly flat rough surface, and then prepare everything as described above.

Do I need to glue the walls?

The correct answer is simple: sticking non-woven wallpaper, if you smear them with glue, will not work. So it is absolutely necessary to smear the walls with glue, and only them. But if any of the strips is already missed, then there is no need to cover the wall: just remove the excess glue with a soft cloth that will come out at the joints. Important: glue is applied only to the strip with which they work in this moment , and not on all canvases at once.

The primer may not be used in only one case: the wallpaper is not initially intended to be used for a long time, and they act only as a temporary solution, for example, until a move or a more suitable wall covering appears. If not primed, it may be found that the adhesion of the material to the surface is insufficient. It is for this reason that canvases often fall off suddenly, as if by themselves.

It is recommended to start pasting from door or window openings. and move deeper into the room, and not vice versa. Always smear the wall not exactly the width of the roll, but with some margin. Particular care should be taken at skirting boards, in corners, at corners and in places with a complex configuration, for example, where pipe outlets are located, electric meters, hanging furniture, wall hangers are placed.

Unlike ordinary ones, it is allowed to glue non-woven wallpaper on PVA. The fact is that their dense, heavy structure makes standard wallpaper adhesives not effective enough, but ultimately, follow the manufacturer's instructions. As written in the instructions, this is how it should be done. If you add polyvinyl acetate glue to the wallpaper (its consumption will be 150 g per liter of the main adhesive mass), the coating will hold more firmly.

sticking

Overlapping non-woven wallpaper is glued in the corners, this allows you to visually cover up various irregularities and deviations from the norm. At the corners are placed corners made of plastic, attached to the walls. Attention: do not excessively “go” on adjacent walls. The technology implies that the roller, after dipping into the glue, is necessarily carried out along the grid, and only when the excess composition is removed, you can run it along the wall. It should be glued from above, for this they take the canvas by the edge and apply it to the wall. Then the roll is smoothly led down, the web is smoothed from the center to the edges with a special brush or roller. You can also use a plastic spatula, but it requires caution.

Make sure not only that the joints are not visible, but also for bubbles, folds somewhere. Attention: after gluing several strips, all subsequent seams are carefully rolled out with a roller. If an extra piece remains below, it is cut off, but not immediately, but only after the canvas dries. On the outer corners, the wallpaper is glued with an overlap of 5 cm. Then a ruler is applied to the middle of the strip and a through cut is made along it with a knife.

Meter wallpaper is more correct to glue end-to-end, but you can not stretch the canvas too much or smooth it too much. A thin strip can easily tear, but there is no way to fix the matter. Attention: Always use brand new glue every time. Remaining from the last repair or from yesterday is completely useless.

It is not difficult to stick non-woven photo wallpapers, but still this work should be done only with sufficient experience and knowledge. It is necessary to customize the pattern with an error of no more than 1 mm. If you have never glued wallpaper at all, you should not take on such a thing. It is better to choose the option for painting, it is easier and more reliable to use.

The simplicity of sticking wallpaper on drywall is only apparent, and without sufficient preparation, even its flat surface will not simplify the task. All visible metal fasteners must be covered with an anti-corrosion agent. Be sure to use an acrylic primer that inhibits the development of mold colonies. Important: do not use too much wallpaper paste, otherwise drywall sheets may get wet and deformed.

To exclude translucence of the base, installation should not be carried out on the drywall itself, but on water-based paint white tones. Please note that gluing wallpaper with an overlap in this case undesirable. Regardless of the base, it is worth turning off the electricity in the entire room, because wet glue is an excellent conductor of current.

It is possible to paste over the walls with non-woven coating in the corners of the room without the help of specialists, but you need to be even more careful than when working with the main space. You should not apply the canvas in equal proportions to both walls, because such a strip will almost certainly stretch and break. If you put a point in the narrowest part of the cloth and draw a vertical line through it, the markings will be more accurate.

Sometimes they still dare to glue non-woven wallpaper on glass. To assess whether it is worth the risk at all, look at how embossed the pattern is on the intended base. On top of the convex ornament, sticking a new layer steadily will not work in principle. Never glue interlining on a paper base because it can't handle that much load.

Part of the non-woven wallpaper is textile, their outer layer is formed by various fabrics, for example, silk. It makes sense to choose linen, it is practical and relatively inexpensive.

A jute coating will help mask even rather serious wall defects, and felt is used when it is necessary not only to decorate, but to insulate a room and protect it from extraneous noise. Non-woven wallpaper on painted walls can be glued with your own hands, but this will require careful and verified preparation.

There are such ways:

scrape off all the previous coating with a spatula, and then prime the base;
sand the paint with sandpaper so that fixing points appear.

The first option is more familiar and reliable, and the methods are approximately the same in terms of labor intensity. In addition, in the first case, you will not be mistaken by creating the wrong roughness, in the wrong place, so the second method should be left to professionals who know all the subtleties.

In fact, sticking wide non-woven wallpaper on your own is no more difficult than narrower samples. There is no special need to even carefully measure and calculate door and window openings, it’s more correct to just buy more material so that it’s probably enough. Remember, if you make a mistake, you will have to urgently purchase additional coverage, and it will not always be possible to match it to the tone of the one already used.

We must strive to ensure that the wallpaper lays down without seams. Those home craftsmen who can achieve this effect can consider themselves almost professional repairmen. To avoid a seam, work with glue carefully, it should not fall on the front surface. Of course, in order to abandon the seams, you need to purchase a special coating that is glued end-to-end, and not overlapped.

Hot embossed wallpapers with a bright pattern look good only in those rooms where there is enough sunlight. In a darkened room (corridor, pantry), they are completely inappropriate. Please note that most of these wallpapers do not have an ornament and are intended for further self painting. Important benefits hot stamping are that it does not accumulate static electricity and is not afraid of water ingress.

How to glue non-woven wallpaper, see the following video.

What to do if they bubble?

It happens that certain problems arise when covering the walls, and then you need to act immediately to correct the defect. Sticking non-woven wallpaper without bubbles is quite simple, you just need not save glue, but use it exactly as much as indicated in the instructions. Then there will be no difficulties.

How to glue non-woven wallpaper, you need to figure it out even before you go to the store. This type of decor successfully masks surface flaws and greatly simplifies repair work. To obtain good results, the requirements for surface preparation and bonding must be taken into account.

Many textures and colors make it possible to decorate the room to your liking.

Non-woven wallpaper used for interior work can have a top layer of different types - vinyl, paper, acrylic, textile. If you plan to stick vinyl or any other non-woven wallpaper, you will need to calculate the required number of rolls. Prepare the tools:

rollers (one is useful for applying glue, the other is needed for rolling the surface);
brushes (for hard-to-reach areas);
scissors or stationery knife;
marker or pencil;
level (laser/conventional) or plumb;
roulette;
putty knife;
container for the adhesive mixture;
sponge and dry rag.

On the preparatory stage do not do without primer mixtures and putty. To apply the primer, you need a roller and a brush. Pasting of surfaces is carried out only with the help of glue intended for materials on non-woven fabric. It is convenient to smooth the strips with a rubber or plastic spatula.

Choosing glue

Not everyone knows what glue is needed for vinyl or other non-woven wallpaper. Suitable glue, which is created specifically for this type of finish. The layer of non-woven fabric significantly makes the material heavier, so if you take the usual composition instead of wallpapering on non-woven fabric, the canvas may come off.

The best non-woven vinyl wallpaper adhesive can be selected from the list:

exclusive. This is a good glue that does not have toxic components and has antiseptic properties. It is great for non-woven standard wallpaper. The main thing is to prime the surface before applying it.
Metylan. Methylan glue is a universal mixture that allows you to work with different types wallpaper. Methylan containing polymer adhesive components has a high degree of adhesion. The composition is resistant to temperature changes, prevents the formation of mold and fits well on any surface. It is important to carefully prepare the wall for applying the mixture.
KLEO. Qualitative composition with antifungal components and a high level of adhesion. Glue Cleo glides perfectly on the surface and does not show through at the joints, so it can be used when gluing non-woven fabric.
Quelyd. Adhesive mixture with bactericidal components and good sliding abilities, the granules of which quickly dissolve in water. Before work, it is necessary to take into account the consumption of this wallpaper glue. If the base is highly absorbent, the material will come off, so it is important to properly prepare the surface.

Some adhesives indicate that they can be chosen instead of a primer. Such a composition is, for example, Methylan.

It is possible and even necessary to glue non-woven wallpaper with vinyl glue. This tool is considered one of the most reliable, suitable for various types wallpaper. Professionals often use Metilan vinyl adhesive.

Wallpaper preparation

Not everyone knows how to properly glue wallpaper on non-woven fabric. Before finishing work, you need to calculate how many rolls you need. This is done as follows:

The perimeter of the room is calculated.
The height of the sheets should be determined depending on the presence of a pattern (rapport). To do this, the length of the rapport is added to the height of the room, which is often indicated on the label, and 5-7 cm are necessarily added for allowances.
To determine the number of lanes, the perimeter of the room is divided by the width of the lane.
To find out how many strips will be on a roll, its length is divided by the length of the strip.
By dividing the number of strips that can be pasted over the room by the number of strips from one roll, you can understand how many rolls to buy.

This method does not take into account the surface finish above the window and door, so you need to add another roll to the result. The data depends on the length of the roll, which can be from 10 to 25 m.

When gluing canvases, a butt-to-butt joint will be appropriate. If you need to paste over the corners, the wallpaper edge should go to the adjacent wall. The second canvas is glued with an overlap. Relief wallpapers are glued according to the same principle.

The material is suitable for wall decoration in kitchens and other rooms.

High-quality performance of work provides for the selection of images and patterns on the non-woven coating. When purchasing material, you must make sure that the same batch number is present on the rolls, otherwise a color mismatch may occur.

Surface preparation

Of great importance is the preparation of the walls in the room for non-woven wallpaper. Without this stage, finishing work will not bring the proper result.

You should start by removing existing paintings from the wall surface. They need to be well moistened with water, and after swelling, carefully remove with a spatula. If paint remains, it is removed in various ways:

mechanical (using a scraper, spatula, hammer);
electromechanical (using a drill or grinder with a special nozzle);
thermal (by exposure to high temperature);
chemical (using a chemical solution).

Be sure to remove the sockets with switches, isolate the wires.

If there are defects on the wall, putty is applied. If there are signs of mold, the areas are immediately cleaned with a solution of bleach and treated with fungicidal compounds. It is desirable to carry out the primer taking into account the type of surface. You can use both ordinary wallpaper glue and special primers.

Prepared surfaces should dry well. It is unacceptable to glue damp walls.

The temperature in the room should be within 10-25 degrees, the humidity level should not exceed 60%.

How to glue non-woven vinyl wallpaper

So that the decor pasted with your own hands does not go away after a certain period of time, professional advice on how to quickly and efficiently glue vinyl wallpapers on a non-woven basis:

Pasting wallpaper starts from the window opening or from the corner. To glue the sheet evenly, a vertical line is drawn along the wall using a level or plumb line.
Sticking provides for the dilution of glue strictly according to the instructions. The work surface is treated with a mixture using a roller. In hard-to-reach places, you should walk with a brush.
To glue the wallpaper evenly, the edge of the first sheet must coincide with the vertical line on the wall, while on ceiling plinth a small push is made. The canvas is gradually smoothed, thereby removing air bubbles. You can use a roller. Excess parts are removed with a metal spatula or knife.
Vinyl non-woven models are glued end-to-end. You should be especially careful when there is a picture. If a gap forms between the sheets, the wallpaper sheets must be re-glued.
In order for the sheets not to move away over time, they must dry well. Make sure there are no drafts in the room. Usually 24 hours is enough.

Wallpaper on non-woven fabrics are:

without embossing (monochrome);
with hot stamping (inhibited, silkscreen, compact vinyl).

The order of work, how to glue embossed wallpaper, depending on their type, does not differ significantly. Hot embossed non-woven wallpaper is glued to the prepared surface. It is necessary to get rid of the old coating, otherwise the lag is not excluded.

Silk-screen wallpapers are the thinnest of the types presented. This suggests that they need to be glued to a perfectly flat surface.

Step by step instructions for gluing

It is necessary to take into account some rules for gluing hot stamping vinyl wallpaper:

glue is applied both to the wall and to the canvas itself;
The sheet is folded in half and left to soak for 10 minutes.

The non-woven fabric is glued to the wall end-to-end, and it cannot be stretched. When hot embossed wallpaper is wet, it stretches a lot, and when it dries, it shrinks. Docking points must be smoothed with a roller.

Many novice masters find it difficult to stick heavy vinyl wallpaper in the corners. It is recommended to overlap the sheets in these places.

Other types of non-woven wallpaper

Less often than vinyl, you can find other options for non-woven wallpaper. As for their sticking, there are some nuances.

Paper

glue paper wallpaper on a durable non-woven substrate (base) is necessary on previously prepared surfaces. The wall is processed with an adhesive composition, which greatly simplifies the task.

Paper options on a non-woven backing look no less impressive

It is better to start gluing wallpaper from a window or from a corner. Although there is not much difference from where in the room to start pasting the walls. The main thing is that the canvas lays flat and butt.

Acrylic

A novelty among finishing materials are acrylic wallpapers, which have a large number of advantages. One of them is high performance. Acrylic wallpaper should be glued in the same way as other types of materials.

Interlining as a substrate for acrylic gives an excellent decorative effect

Due to the presence of interlining, the adhesive composition is applied directly to the work surface. When gluing the first canvases, they usually start from the window opening or the central corner. After gluing, it is important to let the material dry well, avoiding drafts.

Textile

Despite the transparent base, the textile layer is quite dense, so it will be possible to hide the possible heterogeneity of the surface color. Since the material is very heavy, non-woven textile wallpaper should be glued using a special adhesive.

The gluing process does not involve overlapping the canvases, as this will spoil their appearance. The advantage of the canvases is that to remove them, you can simply remove the top layer, leaving the base.

Textile trim looks rich and is very durable

To prevent the material from coming off after gluing, the windows and doors in the room are tightly closed until the sheets are completely dry.

Interlining on a paper basis

Among the many materials for interior decoration it is worth highlighting non-woven wallpaper with a paper base. Cloths are suitable for any living space, except for the bathroom and kitchen, because they are deformed due to high humidity. The material is attractive in that it has increased wear resistance.

An interesting option, characterized by high strength, is non-woven paper-based

In the process of work, both the surface of the wall and each wallpaper sheet are treated with glue. Non-woven wallpaper on a paper basis is carefully applied joint to joint without the formation of cracks.

For painting

Gluing non-woven wallpaper for painting is a fairly profitable option, since you can change the interior at any time. In order to properly dye non-woven fabrics, you should carefully study the information on the package, where the manufacturer indicates the type of paint required and its consumption. If desired, it is given the desired color with the help of color.

It's a good idea to paint a small area first, as the paint looks a little different on paper.

With the help of paint, unique effects are created on non-woven and any other basis.

A layer of coloring matter is applied with a roller from top to bottom. Near windows and doorways it is better to work with a brush. Before applying a second layer, you must wait for the previous one to dry.

Photo wallpapers of various types

Thanks to photo wallpaper, you can significantly change the design of the room. Let's consider how to correctly glue photo wallpapers on non-woven fabric.

Often, two-layer sheets with a vinyl coating are used to decorate the room. Pasting the walls with vinyl wallpaper begins after pre-training surfaces.

Modern photo wallpapers are spectacular and luxurious, but require a careful approach to gluing

The wallpaper is glued end-to-end. Only the wall is processed with glue. In order for the work to progress without difficulty, the sheets are placed on the floor in the right order or stacked.

Secrets and features of gluing

To properly stick wallpaper on a non-woven backing, keep in mind that:

the adhesive composition must be applied without gaps;
canvases are glued butt-to-butt, in the corners - overlap;
you can start from the corner or from the window opening;
the sheet after gluing is ironed from the central part to the edges.

In this way, you can glue meter-long wallpaper.

Do I need to glue non-woven wallpaper with glue?

When a person is going to glue vinyl wallpaper on a non-woven base in one of the rooms, he does not know whether it is necessary to apply glue to the canvas or whether only the surface can be smeared. According to technology, only the wall needs to be smeared.

The manufacturer usually indicates on the packaging how to apply adhesive mixtures.

If excess adhesive mixture protrudes, use a dry cloth to remove the adhesive from the wallpaper after smoothing the canvas.

Is it possible to glue wallpaper on wallpaper?

One of the most common questions regarding internal finishing works, - is it allowed to glue non-woven vinyl wallpaper on old canvases. If you do not get rid of the previous wallpaper, the new ones may move along with the old ones.

When it is not possible to remove the coating, before gluing new wallpapers on old wallpapers, you need to apply an aqueous solution of PVA emulsion or silicate.

How to glue non-woven wallpaper in the corners?

Special attention requires sticking in the corners. If you have to glue the corners with vinyl wallpaper, you should proceed as follows:

the first sheet in the corner should go to the adjacent wall by 2-3 cm;
the second is also superimposed with an offset;
excess is removed with a sharp knife.

In order to glue the vinyl canvases well in the corners of the room, you must first make the markup.

Wide canvases

If you glue wide vinyl wallpapers based on non-woven fabric, the number of joints is reduced. At first they will be difficult to handle, but gradually it will become easier to work with.

Glue meter-long vinyl wallpaper based on non-woven fabric in the same way as other varieties:

the wall is treated with glue without gaps;
the first canvas is glued after alignment along the intended line;
the sheet is gently smoothed with a roller;
excess areas are removed with a metal spatula.

When you have to finish the corner, the same method is used as always - overlap.

Pasting the ceiling

It is necessary to glue non-woven wallpaper on the ceiling in the same way as on the walls. Thanks to the non-woven substrate, the adhesive mixture is applied only to the pasted surface, which is preliminarily prepared. The canvases are superimposed end-to-end, which requires marking. When smoothing sheets with a roller, excess glue may appear. To remove them, a dry rag is useful.

Glue on drywall base

Finishing drywall is often done with wallpaper. The plasterboard wall is pasted over in the same way as other bases. Before gluing to drywall, you will need to use putty and a primer.