Wall openings design. Doorway without a door: necessity or design decision? Opening design options

When planning the decoration of an apartment or house, choosing the perfect design solution for many inhabitants becomes a difficult task. In an attempt to decorate their home, people use everything available materials, ranging from Italian wallpapers to artificial stone. Finishing is a particular challenge. doorways, because the number of options that designers offer can amaze even the most demanding imagination.

It is extremely difficult to choose the ideal way that will optimally fit into the overall style decision and correctly emphasize the leading direction.

Finishing the doorway: choosing the right solution

Before deciding on the design of the doorway, the designer, together with the owners, needs to decide what shape these openings will be.

There are such forms of doorways:

• Rectangular opening. This way of organizing space requires either a door or a voluminous and noticeable cashing. Depending on what kind of cashing will be chosen, the doorway can perform both an auxiliary and a main function in the interior of the room. By itself, such a strict form requires additional decor, which can give it the desired gloss and attractiveness.



• Arch. This way of designing doorways is quite popular and appropriate in certain styles. Designers note that the use of an arched opening is advisable only if the rooms connected by it are made in the same style. Experts advise paying attention to the fact that excessively massive or bright decorative elements can make such an opening heavier.



FACT! The arch does not have to be round. Other forms are also used: ellipsoidal, trapezoidal, asymmetric arch - each of them is worthy.



• Arch imitation. This way of designing a doorway can be called "lazy", because in this case, an ordinary rectangular opening is given the shape of an arch with the help of segments fixed in the corners of the opening. Designers advise in this case to make these corners openwork and airy - this will allow you to fit such an arch into any interior and make the room more spacious and lighter.



Finishing doorway without door- this is a special task, the complexity of which lies in the fact that all the attention that could be focused on the door is transferred to the doorway. Therefore, in this case, designers pay more attention to the design, choosing options and methods of finishing much more carefully.

ADVICE! Often, as a substitute for a door in such openings, curtains or curtains are used, as well as lambrequins falling with noble folds.

Use of plastic and drywall

Despite the popularity natural materials, the use of PVC panels and is still in fashion, as well as finishing the openings with artificial decorative stone. All these materials are acceptable options, which, with decent performance, can become a real decoration of the room.



• Plastic panels are the simplest and most concise design option for the opening, as they allow you to imitate such a popular wooden texture. Dark panels allow you to create an attractive contrast with a light painted or wallpapered wall, thereby emphasizing the rigor and sophistication of the interior. This design method allows you to visually expand the space and create the effect of a high ceiling. In addition, such panels are the most accessible: they are easy to clean, even if dust or dirt is visible on the surface.



• Polyurethane molding replaced the usual plaster, because it has a decent appearance with less weight and excellent practicality. When choosing this method of decorating a doorway, you should be extremely careful, since the abundance of decor can overload the room and make it small.

  

  Most often, in such cases, the most simple and concise stucco molding in white or another neutral color is used.

  

• Drywall. Finishing with the help of this material is carried out in cases where the task of designers and builders is to divert attention from the opening, creating the effect of a single room.

  

  In addition, it often becomes the basis for using other decor: for example, polyurethane cornices are often glued onto plasterboard structures.

  

  Regardless of what kind of material will be used to decorate the doorway, designers are advised to pay attention to the appropriateness and expediency of using massive or voluminous elements.

  

  Complementing the traditional design with moldings or mosaics means making the room individual, adding a touch of the owners' subtle taste to it.

  Decorative stone in the decoration of doorways

  Particularly popular in recent times uses the decoration of doorways with decorative stone. This is due to the fact that decorative stone is one of the most stylish ways to decorate doorways, it allows you to give the room a new mood and sophistication.

  

  The use of such material is quite expensive, but more than offset by a decent appearance and reliability of the result.

  

  Finishing the opening with artificial stone is often the ideal solution, since this material has the following advantages:

  • spectacular appearance;
  • durability and reliability in operation;
  • ease of maintenance and the possibility of restoring damaged elements;
  • variability and compatibility with other decorative materials.

  

  Most often, for decorating openings in apartments with artificial stone, medium-sized stones are used that do not load the interior. To give such a finish "naturalness", the outer edge of the finish is deliberately uneven, while smooth edges are used extremely rarely.

  

  If an arch is decorated with a stone, then in its upper part the stones are laid along the perimeter of the opening: in this way, the geometric shape of the arch will be emphasized, which will make it more noticeable against the background of the rest of the wall lined with stone.

  

  In the case of decorating a doorway without a door with such a stone, the decor should be laid on both sides of the opening: it is this option that will allow you to optimally fit the finish into the interior and connect two rooms into one.

A doorway that is not equipped with a door is an original and aesthetic solution, often chosen by apartment owners. With proper design of such structures, you can significantly transform the living space and free up usable space. In an apartment of small dimensions, getting rid of an extra door is quite easy way make the space visually wider. Finishing a doorway without a door is a successful and stylish solution to the problems of a small space.

Features of openings without a door

Doorways without doors are successfully designed in public buildings, in spacious cottages and small dwellings. This solution is a win-win when combining the living room and the hall. With the help of open passages are often combined small kitchens and hallways.

Quite often there are situations when the door is unnecessary. It interferes with moving around the apartment and creates unnecessary difficulties. Doors should be installed in the bedroom, office and children's room. This is because such rooms are designed to create personal space.

Sometimes you can’t do without a door to the kitchen either. Extraneous odors do not enter living rooms. The smell of cooked food is a very strong irritant. Therefore, in the absence of a normal system for removing smoke and gases from the kitchen, it is imperative to install a door. Photos of doorways without doors will help you understand what you should choose for your apartment.

To complete the decorative design of the opening, it is not always necessary to invite professional builders. Such work can be done independently. However, you should get acquainted with the features of the process and the main errors. It does not hurt to look at the photos of already finished projects.

Attention! Sometimes the design of the room involves the same finish of all openings in the room - both door and window. Traditionally, lamps are mounted in the aisles. They line up around the perimeter of the passage. Other popular options are curtains, shelves, and other decor details.

opening shape

Making an opening without a door can be done in any configuration. The main condition is that the shape must correspond to the size of the room and its style. Skills must also be taken into account. interior decoration worker. In their absence, you should not take on a complex project.

Rectangular openings

Often the doorway is left in the same shape as it was before the door leaf was dismantled. Even a master with little experience can perform the work on its decoration. Rectangular structures lend themselves perfectly to finishing. In addition, when facing them, you can embody a wide variety of ideas. Usually, to create a harmonious look, they are finished with plasterboard panels.

The most affordable option is to paint the opening to match the wall surfaces. Rectangular vaults are often designed in the form of an arch. facing stone.

designer arch

The arched passage is also a classic option. However, the variety of forms provides wide opportunities for the realization of original fantasies. How to finish the arch without special skills? by the most simple solution is the purchase of a finished vault made of wood. Such products usually perform standard dimensions.

For those who like to experiment, you can offer the following solutions:

If you choose an arch of the original form, you can experiment with the visual perception of space. With the original form of the arch, the design should have a strict look.

Finishing materials

For the design of doorways without a door, a variety of materials can be used. They usually have different shades, textures and prices.

Decorative rock

The appearance of stone elements is always distinguished by nobility and respectability. Its different types have their own installation features. Their durability also varies. The main difference between natural stone and artificial stone is that it costs much more. It is worth remembering that artificially created minerals can also be of various colors and textures. One of the main advantages of such products is lightness.

The stone will look good at the entrance, in large areas and in rooms where there are few pieces of furniture. The opening, which is made out of such material, will look perfect in a room with a fireplace.

Quite often, in parallel with the open opening, the same installation is carried out around the window. Thanks to this technique, the design becomes complete and more comfortable. Therefore, such a solution when making openings is very popular among apartment owners.

When performing work independently, it is necessary to observe certain subtleties of technology:

• Before working around the opening, markup should be done. It is necessary to note the shape of the masonry.
• Experienced craftsmen recommend that before performing such work, first lay out all the stone elements on the floor in the order in which they will be fixed on the opening.
• Laying starts from the bottom corner.
• Plates should be laid symmetrically on both sides of the opening. In its lower part, the masonry should have a more massive appearance. All sharp corners of the masonry must be processed.
• After completion of work, the mineral should be treated with a special solution that gives the surface a natural shine.

To qualitatively decorate the doorway with a stone, you should lay it so that it is in contrast with the shade of the wall. It is better not to combine stone and plastic.

MDF panels for finishing openings

Such plates can perfectly imitate natural wood. They are quite durable and at the same time are suitable for finishing both interior and entrance openings. This is due to the universal properties of the material. It is quite light and attractive.

The installation technology of MDF panels is simple. They must be fixed with special adhesives. Liquid nails may be used. All joints are closed with platbands. The disadvantages of such products include only the limited color palette.

PVC panels

Plastic panels are selected in almost any shade. However, they can have any texture. More popular is plastic that imitates wood. Even an inexperienced person can handle the installation of PVC panels House master. The material has a small weight, so it does not slip when installed on the glue.

Caring for plastic elements is quite simple. Such openings are decorated with lamps. The disadvantages of such a design of the opening include the fact that it is possible only for the interior space.

Clinker tiles

In my own way appearance such a facing material resembles a brick. It is produced in various colors and shapes. Typically, tiles are used for exterior cladding of houses. However, quite often the material is also used to create open doorways. This is due to the ease of installation.

Depending on the characteristics of the surface to be finished, the clinker elements are mounted on liquid nails or tile adhesive. Tiles are laid asymmetrically.

Drywall and stucco

Drywall boards are flexible and lightweight. Such material allows you to design the doorway of the most original forms. The disadvantage of this solution is the increased fragility of the material.

Stucco is a product made of polyurethane or gypsum. They are traditionally chosen to create beautiful openings. Such material presents some difficulties during installation. The master will need to have good taste and experience in similar work.

Ready-made decorative parts made of polyurethane can be bought at a hardware store. When using stucco elements, one rule should be followed - the smaller the area of ​​\u200b\u200bthe room, the smaller it is necessary to choose decorative details.

Curtains

Often the vault is decorated with curtains. This method is the most common. Thanks to this solution, a special comfort and completeness is created. It is better to choose curtains that will be combined with curtains.

With this decision, a decorative composition of various fabrics should be used. The original canvas can also be used. You can choose curtains-cords made of bamboo. When hanging curtains, it will not interfere with free movement. Usually the curtain is made with side fastening to the wall.

An open opening, which is decorated in the general style of the room, can transform any room.

Opening preparation

Before the beginning finishing works passage is straightened out. This can be done using:

• plasters;
• drywall sheets.

Plastering an opening without a door - this finishing method is one of the most common. However, when choosing it, a lot of dirt and dust is formed. For this reason, many choose drywall to finish the passage without a door.

Depending on the design of the passage without a door, it can be made a bright element of the interior, or practically hidden, diverting attention. After plastering, the opening can be either painted to match the wall, or overlaid with decorative stone panels.

When sheathing an opening without a door with drywall plates, the surface becomes as smooth as possible. Any decorative elements are glued to it, if you want to pay attention to it. If you want to leave the opening without a door invisible, you just need to paint it.

Unlike plaster, drywall is easier to process when constructing an opening without a door. When working with it, no debris and dust are generated, and fixing the plates is quite simple. With drywall, it is easy to equip a passage without a door of any configuration. This attracts many apartment owners.

After completing the plastering or sheathing of the opening with plasterboard sheets, before finishing work, the surface to be treated should be cleaned of various contaminants. Then you can start decorating.

Complex openings without a door

If the considered options for finishing the opening seem too simple, you can experiment with finishing. It is necessary that this be possible with a certain ceiling height and dimensions of the room. For example, in the upper part of an opening without a door, you can create a structure of complex shape. In such cases, plastic elements, colored glass and lamps are often chosen to finish the passage without a door.

For most modern interior styles, it is important to embed spot diodes in an opening without a door. They will look very stylish.

The opening can be made in any shape if you use drywall panels. Quite fashionable are the shelves that are installed on the wall near the openings. Openings that include bar counters look great. Thanks to them, successful zoning of the territory is carried out.

It is quite difficult to do such work with your own hands. Therefore, when deciding to create such an opening, it is necessary to invite specialists. They will help to draw up a project and calculate how much materials will be needed to finish the passage without a door. Installation work when calling professionals will be completed as soon as possible.

If a canvas is not installed in the doorway, the room can be radically transformed. At the same time, the space will visually expand. If the dwelling is represented by a studio room, arches of complex shape will look original. To equip rough and simple openings without doors should be in the hallways.

Swing and even some types sliding doors take up too much space, so last years similar designs are less likely to be installed, mainly in bedrooms. The advantages of doorways without a door are obvious - with the help of them you can visually combine the premises into a single whole, visually expand them or even "raise" the height of the ceilings. Moreover, such structures will cost a minimum amount.

Which is better, classic or arched opening?

The use of arches is justified in cases where it is required to change the visual perception of the interior. There are many such structures. They can be convex or concave, flat, lancet, elliptical or trapezoidal, asymmetrical, decorated with lobes (several semicircles), parabolic or keeled.

Classic arches, in which the corner radius is half the width of the opening itself, are more often used in rooms with high ceilings. If you want to increase their height, it is better to stop at more gentle structures. The living room and the corridor can be connected by an arch with slopes in the form of semi-columns, which will give the room more solemnity.

Just keep in mind that richly decorated doorways in the Baroque or Empire style or conspicuous beveled structures are best used to decorate spacious rooms - in houses of a small area, they look ridiculous. In the latter case, it is better to stop at symmetrical arches with discreet polyurethane moldings or plaster overlays on top.

In some types of interior partitions, they are reinforced with doorway elements. In this case, after dismantling the door frame, do not forget to also strengthen it with a load-bearing frame.

Finishing materials

For the design of doorways without doors use:

• standard openings made of eco-friendly natural or veneered wood, which are still relevant today
• drywall constructions: light inexpensive material with which you can easily create smooth curves, arches and three-dimensional structures; to give rigidity, it is mounted on a durable metal or wooden frame
• polyurethane products imitating stucco molding: used in cases where slopes need to be given more lightness and grace; depending on the design idea, the “stucco molding” on them may have a deep or slightly pronounced relief; the increased flexibility of the material allows it to be used to create structures of various shapes
• gypsum stucco: luxurious relief patterns, friezes and ornaments from it are more reminiscent of natural stone; however, some skills are required to work with it; used to decorate rooms in the Renaissance, Baroque, Empire, Classicism styles; simultaneously with doorways, columns, cornices, ceiling rosettes, balustrades are trimmed with plaster
• plastic panels (usually PVC): a material that goes well with modern interior details; such panels do not require special care and are easy to clean with conventional means; in addition to ordinary smooth PVC panels, products are produced with textile trim, special decorative glue, artificial leather, with metal overlays, coated with paints imitating gold leaf

Read also:

Surface preparation

Leveling door jambs with a clamp

Before finishing a doorway without a door, the slopes should be cleaned of old finishing materials, crumbling plaster and dust. Large cracks are pre-primed, and to increase adhesion, they are reinforced with a plaster mesh and covered with a layer of mortar (you can use ordinary cement-sand). All extra protrusions are pre-stuck.

When finishing with soft polyurethane stucco or gluing gypsum stucco, the surface should be leveled with drywall or plastered, and after drying, wipe it with sandpaper. Similar preparation when installing drywall or wooden panels not required - it is enough just to knock down poorly holding pieces of plaster and large irregularities.

To get rid of dust, while cleaning the surface, periodically spray the surface of the doorway with a spray bottle.

Read also:

Slopes and arches made of drywall

Drywall arch frame

With this inexpensive material, you can get very original designs, even in the absence of any experience in construction. . There are three ways to fix drywall: frame, glue and fastening on polyurethane foam.

Read also:

Frame method

Most often, doorways are finished using this method:

When creating a frame, it is better not to use wooden beam, and a metal profile. It is more even and has an ideal geometry. Plus, even with a change in humidity, the material will not warp

Cut it with ordinary metal scissors

Metal rails are mounted around the perimeter of the slope on both sides of the doorway

To work, you need a guide profile (it is marked with the letters PN). To strengthen the installation of racks, a PS profile or wooden bars are used, which are inserted inside the racks. In the upper part above the door, the frame is reinforced with vertical lintels.

Hangers are used to fix the profile to the wall. – strips of metal with many holes. Distance between dowels and screws - 20 cm

The horizontal and vertical arrangement of the frame elements is verified by the building level

If necessary, lighting cables or communication wires are laid in the frame

To create arches, you can purchase a special arched profile. You can also bend the usual one if you make multiple cuts on one of its sides

When cutting drywall, measurements must be taken for each side of the doorway: after all, there are simply no perfectly even walls

Cut this material with a sharp clerical knife . Drywall consists of 3 layers, each of which needs to be cut. To do this, it is laid on a flat table, a cut is made at the beginning of one layer of cardboard. At the same time, the gypsum layer, located in the center between the two sheets, is also partially cut. The place of the cut is shifted to the edge of the table, a bar is placed and, lightly tapping, the plaster is broken off. It remains to turn the sheet over and cut the second layer of cardboard

Drywall is fixed with self-tapping screws so that the seam between the sheets falls exactly on the center of the metal profile. Distance between fasteners 20 cm

Screws should not be screwed along the edges of the sheet, otherwise the drywall will crack. You need to step back a little from the edge

Arched drywall of smaller thickness is used to create arches . You can also bend ordinary sheets. This is done in two ways (see photo). With the dry method, multiple cuts are made on one side of the sheet. Moreover, the more often they are located, the smoother and steeper the bend will turn out.

With the wet method, many punctures are applied to one side using a spiked roller. Then the sheet is moistened, bent and fixed until completely dry with construction tape to a template that repeats the shape of the bend.

After installing the drywall, all seams are glued with sickle tape, and then sealed with plaster

Read also:

Adhesive way

To save space, drywall can be simply glued to the surface with putty or special glue without using a frame. .

But for this, the opening needs to be ideally leveled with a cement-sand mortar or putty:

To improve the adhesion of the drywall bonding area, it is necessary to paint over with a deep penetration primer

The adhesive composition is applied to the sheets with small slaps

In order for the glue to be well distributed over the surface, it is better to move the sheet a little first in one direction and then in the other direction. Excess glue is immediately removed with a rag or sponge.

All seams between sheets are sealed with the same composition.

The glue dries in about two days. At this time, drywall at the edges and center is fixed with wooden planks.

Read also:

Finishing the opening with plastic

A doorway without a door to the kitchen is best trimmed with plastic. Indeed, in this room, even with a good hood, there is always a child. Plastic is easy to clean with a regular cloth dipped in soapy water.

The range of PVC products is quite wide - doorways can be trimmed with plastic that imitates precious woods, stone and other expensive materials.

The panels are fastened both to drywall and to a well-leveled and plastered surface using mounting glue or liquid nails. As in the case of drywall, you can use mounting foam.

The adhesive composition is distributed in a thin layer over the surface of the panel. Lubricate yourself is required doorjamb. Next, you need to wait about five minutes for the composition to grab, and then press the panel well against the surface to be glued.

It is not worth fixing plastic on self-tapping screws - when making holes in it, fragile material can crack

The most vulnerable places of plastic structures are the corners. Over time, they can chip. To prevent this from happening, use decorative arched corners. You can also use slopes for plastic windows. They are placed under the panel to strengthen and stiffen the structure.

Standard panels have a width of 300 mm, so they often have to be cut not only horizontally, but also vertically. Builders cut them with a special cutter. By the way, it is inexpensive, so if you decide to seriously do repairs, you can buy it for home use or even make it from a well-sharpened strip of metal.

You can cut the panel quite evenly with a hacksaw with low teeth, a grinder or a jigsaw. In order not to melt the plastic, the last two tools must be set at low speeds

Small cuts can be made with a regular or construction knife

Panels should be left at room temperature for 24 hours before cutting. Otherwise, cold plastic will chip off.

Plastic in the corners can be easily bent. Since such panels consist of two PVC sheets connected by stiffeners, for bending you will need to cut and remove a 5-10 mm strip from the wrong side (undecorated), and then form a corner. True, this will require some skill - in the absence of experience, the fold line may turn out to be nervous. In this case, it can be closed decorative corners

Read also: wooden stairs to the second floor: views, device, step-by-step instruction DIY making (100+ Photos & Videos) + Reviews

Foam mounting

Another way to finish doorways without doors (see photo) is to attach drywall to mounting foam:

1. After dismantling the old coating and leveling it, a layer of foam 1 cm thick is applied to the drywall with a snake
2. Sheets tightly, with great strength cling to the surface
3. Then drywall should be torn off and wait 10 minutes for the foam to increase in size.
4. Again we press the sheets against the wall, fix them with spacers and leave them in this position for a day
5. After drying and strengthening the foam, it remains to seal the seams between the sheets with a plaster mortar using a sickle tape
6. To protect the corners from spilling out, it is better to install perforated plastic corners on them. They are attached to the mortar, squeezing out its excess through the holes, and then plastered
7. In the future, the slopes can be painted with acrylic or water-based paint, paste over with stucco or finish with plastic

How to make an opening to the hall

Before talking about how to design a doorway, we note that it is necessary to consider the options, taking into account the interior decoration as a whole. Only in this case it will be possible to create a positive aesthetic impression, and the result will be able to please the inhabitants of the house.

The instructions below will not only tell you about beautiful decoration doorways, but also guide readers in the selection of materials that can be used for this purpose. A good visual aid will be the video in this article.

Despite the fact that the tastes of people vary greatly, there are certain stylistic techniques that help to achieve harmony in any situation. modern man it is more and more difficult to surprise with something, and, nevertheless, interior design specialists present more and more unexpected creative ideas, including those related to the design of doorways.

The attitude towards them is twofold: on the one hand, a door is needed, since it best ensures the privacy of a single room. And the door itself can have such an interesting design that all other accessories in the room simply fade against its background. On the other hand, very often you can do without them - so why spend money?

wide slopes

When installing doors, in any case, traditional interior doors (see), you don’t have to think much about the design of openings. When buying wooden and MDF doors, you can always purchase additional strips in the kit, which will allow you to match joinery veneer the slope over the entire thickness.

• Another thing is that on sale you will not always find a bar of the desired width - which most often happens when an opening is to be designed. The entrance to a house or apartment is always located on bearing wall, and its thickness is at least 25 cm. In addition, two doors are most often mounted at the entrance, each of which is installed flush with the wall surface.

• In this case, the question: “?” can be answered simply. It is impossible to come up with anything better than ennobled sheet material. It can be not only laminated or veneered chipboard, but also vinyl-coated drywall, which is called gypsum vinyl.
• The space between the two doors can be simply plastered and or leveled with drywall, painted to match the walls in the hallway. Here the choice is not so great, since the presence of two doors in the opening imposes certain restrictions on its decoration.
• When there is only one door at the entrance, the slopes are usually finished in the same way as the wall to which they adjoin. Depending on the design of the hallway, they can be faced with stone or brick tiles. And also sew MDF panels- if this finishing option was used for the walls of the hallway.

And in general, no matter what panels are used in wall decoration: classic wood, 3D gypsum or eco-panels, polyurethane wall panels - all this can be used to finish wide slopes. If they are narrow, then there are not so many options: use extensions matched to the texture of the door, or simply plaster or wallpaper, and frame with a decorative plastic corner.

Advantages of a door with a smooth leaf

When it comes to openings between adjacent rooms, then there are disproportionately more options suitable for decoration. Firstly, they may not have a door - and even if there is, it can be made completely invisible if desired.

At the same time, her canvas is decorated with the wall in the same style, and the fact that there is a door there can only be guessed by the presence of a handle. Loops - and those are not visible, since in this case, hidden mounting options are used. If you look at the photo below, you can see that a regular interior sticker was used to decorate the opening with the door.

AT this case, it is pasted on the wall with a call to the canvas, and not only hides the door, but draws attention to it. It is clear that not every opening can be designed in this way.

To do this, a door must be installed with a special, hidden-mounted box, which is not closed with platbands on the front side, but simply plastered. Well, then everything is as usual: putty, primer, painting.

door murals

A hidden door can also be highlighted on the wall, and photo wallpapers are best suited for this purpose. They can also be used for conventional shield wooden door- but only on condition that her canvas will be puttied and treated with a primer. Otherwise, the wallpaper simply will not stick to the surface.

Such a landscape, which we see below, only spoils. Therefore, many designers offer to install pendulum doors that can be opened in one direction or another with a slight push of the hand. Here they can be completely made invisible - if, of course, the canvas is lined in the same way as the adjoining wall.

Every owner of an apartment or a private house dreams of decorating it in a stylish and original way. After all, the interior of the home speaks of the taste and life position of its owner. Unfortunately, most typical buildings are characterized by cramped rooms, so when decorating such rooms, the main goal should be to expand the space. Interior doors visually compress the dimensions of the premises, and also create a dead zone, which is not always functional. An excellent solution for small apartments is the design of a doorway without using a door. How beautiful it is to fit such a passage into the interior with your own hands - read on.

If you want to expand the space of two adjacent rooms, or just dream of interestingly beating the layout of your house, then one of the best options for you is to create an open doorway between the rooms. Such a modern design will fit well into absolutely any interior and will be a great find for small apartments.

In this way, you should not finish the doorway leading from the bedroom to the common room, as this part of the apartment requires privacy. However, the arch, which serves as a passage from the living room to the kitchen, will add a special charm to your home.

Of course, an interior portal will not be able to 100% distinguish between neighboring rooms, however, for space zoning, it is the best fit. This finish has a lot of advantages, thanks to which, it can successfully replace a doorway with a door.

Advantages of open interior passages:

1. This technique will allow you to combine two rooms with different functions into one. It would be especially appropriate to decorate the entrance to the living room, library or kitchen with an arch.
2. With the help of open doorways, you can make the interior with the most unusual design. A huge number of finishing materials for such structures and different variations of forms will help to realize any fantasy.
3. Open interior passages do not need to be looked after, while door hinges need constant lubrication.
4. Ennobling an arch without a door structure is much cheaper than installing a modern door with an attractive appearance.
5. Sheathing an interior portal is quite simple. Unlike installing a door, even a person who does not have experience in finishing work will cope with such work.

Such entrance structures have only two drawbacks: the impossibility of complete privacy, and a decrease in sound and smell insulation properties. In relation to a fairly voluminous list of advantages, these disadvantages do not seem critical, but they negate the possibility of installing open portals in bathrooms and bedrooms.

Options for finishing a wide doorway

One of the main advantages of finishing interior passages without using a door is the possibility of using the most different materials. Due to the variety of design options for such portals, they can fit into almost any interior.

The best options for finishing interior portals:

1. A wide doorway can be trimmed plastic panels. This type of finishing materials is quite cheap, but it looks attractive. Especially popular are PVC panels that have a visual resemblance to wood. Such an imitation is outwardly almost indistinguishable from natural materials, so it will be an excellent addition to interiors in a classic style. Modern designs can be decorated with an interior passageway trimmed with a bright plastic frame.
2. Polyurethane stucco molding is an excellent frame for luxurious classic interiors. However, do not rush to decorate portals between two small rooms in this way, as this type of decoration tends to hide free space. Polyurethane stucco molding looks very similar to its gypsum counterpart, but its weight is much lower, and the cost is not so high. Another advantage of this material is the ability to paint the doorway, decorated with it, in absolutely any color.
3. Artificial stone, despite its high cost, remains one of the most popular design options for a doorless interior passage. The manufacturing technology of such materials implies the possibility of obtaining absolutely any color. The perimeter of the arch is decorated with decorative stone, however, it is possible to clad a large part of the wall around the entrance element.
4. Clinker is a tile imitating brickwork. Such material can be seen on the facade of the building, but it is also suitable for ennobling the doorway. As well as fake diamond, the clinker is placed around interior portal. To make this design look more interesting, the edges of the material are not cut at the same level, but left in their natural form. Especially harmoniously, artificial brick fits into the loft style.

There are other options for finishing doorways without doors, but the ones we have given are considered the most successful. Having a well-developed imagination and basic knowledge in the field of finishing work, you can decorate the interior portal in a more original way.

If you want to improve the doorway, spending a minimum of money, use a regular laminate to finish it.

It is not necessary to use expensive materials to decorate the arch. For modern interiors more appropriate regular painting doorway.

Form of finishing the doorway without a door

The doorway differs not only in the way of finishing, this element of the interior of the room can be given absolutely any shape. In this way, you can subtly emphasize the style of interior design.

What forms of doorways without doors are:

1. The rectangular passage is the most simple option interior portal. This form of openings is the easiest to work with.
2. The arched passage looks original and stylish. It will perfectly complement both classic and modern interiors.
3. Asymmetric arches are the most unusual way to design a doorway. Such passages are not located exactly, but obliquely. Asymmetry looks most advantageous in newfangled unusual interiors.

These design options for doorways look equally good in different interiors. Before deciding on the shape of the interior portal, think carefully about whether you can bring your idea to life.

How to make a doorway without a door with your own hands

To make an open passage between the rooms with your own hands is within the power of everyone. The main thing is not to overestimate your capabilities and choose portal options that you can master the creation of.

So the conversion of an interior doorway into a simple rectangular opening without doors does not require special skills and special documents. These works involve only the dismantling of the door frame and decorative trim formed portal.

If you want to give the interior passage a different shape or even expand it, then you will have more worries. First of all, you will need to get permission from the housing authorities. Then dismantle the old finish and get rid of the extra parts of the wall. After dismantling works are completed, you can move on to strengthening and leveling the resulting opening, as well as giving it the desired shape.

If you live in a multi-story building, then in order to dismantle part of the wall, you will need to obtain permission from the utilities. Otherwise, you may get in trouble with the law.

Finishing doorways with decorative materials is a fairly simple step. You can choose any option you like and use it according to your idea.

The original doorway without a door (video)

Doorways without doors are not a new, but rather original way of decorating interior passages. You can use it in absolutely any style of interior. Trust your taste, do not be afraid of non-standard solutions, and your interior will delight you with its individuality!